Acyl Iodides in Organic Synthesis: II. Reactions with Acyclic and Cyclic Ethers

Reaction of acyl iodides RCOI (R = Me, Ph) was studied with acyclic and cyclic ethers (Et₂O, MeCHCH₂(O), ClCH₂CHCH₂(O), THF, O(CH₂CH₂)₂O, EtOCH₂CH₂OH, EtOCH = CH₂, PhOEt]. The reaction occurred with the rupture of one or two CO bonds furnishing the corresponding iodides and esters.     

Acyl iodides in organic synthesis: X. Reactions with triorganylsilanes and triphenylgermane

Reaction of acyl iodides RCOI (R = Me, Ph) with triorganylsilanes R′₂R″SiH in toluene gives 50–60% of the corresponding triorganyliodosilanes R′₂R″SiI. Triethylsilane reacts with the same acyl iodides under solvent-free conditions to afford the corresponding aldehyde and triethyliodosilane as primary products. Triethyliodosilane undergoes subsequent transformations into hexaethyldisiloxane and triethyl(acyloxy)silane Et₃SiOCOR (R = Me, Ph). Reactions of acyl iodides RCOI (R = Me, Ph) with triphenylgermane in the absence of a solvent lead to formation of iodo(triphenyl)germane in more than 90% yield.     

Synthesis, characterization and cyclic voltammetric studies of β-ketooximato ruthenium(II) complexes

Summary -Ketooxime [RC(O)C(NOH)R] (R = Me or Ph) ligands (HL) react with [Ru(PPh₃)₃Cl₂] in refluxing EtOH to yield [Ru(PPh₃)₂(L)₂] complexes. For R = Me, one isomer was obtained, while two isomers were isolated when R = Ph, due to a bulk effect. The complexes are diamagnetic and absorb intensely in the vis. region due to MLCT transitions. In MeCN and CH₂Cl₂ solution, Ru^II-Ru^III oxidation occurs in the 0.69–0.92 V versus s.c.e. range. The oxidation potential depends on both the electronic nature of R and the stereochemistry of the complexes.     

Expected and unexpected photochemical reactions of acyl iodides

Photolysis of acyl iodides RCOI (R = Me, Me₂CH, Ph) under UV irradiation in toluene environment for 20–55 h proved to be a simple and efficient method of preparation of symmetrical α-diketones RCOCOR. In contrast, the photolysis under the same conditions of acyl iodides RCOI [R = Me(CH₂)₃, Me₃C] did not lead to the formation of the corresponding diacyls, and the reaction products were unexpected 1,1-bis(4-methylphenyl)pentane and a mixture of isomeric 3- and 4-methyl(tert-butyl)benzenes respectively. The most probable mechanism of their formation is the primary photochemical acylation of toluene in the aromatic ring followed by the photochemical reduction of the arising butyl 4-methylphenyl ketone in the case of the valeroyl iodide or the photochemical Norrish type I cleavage of isomeric 3- and 4-methylphenyl (tert-butyl) ketones in event of the pivaloyl iodide. In the photolysis of acetyl iodide (R = Me) in benzene or toluene alongside the diacetyl formation polyarylation process was observed of acylated and iodinated into the aromatic ring solvents with the formation of polymeric products with semiconductor and paramagnetic properties.     

Acyl Iodides in Organic Synthesis. Reaction of Acyl Iodides with <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-Dimethyl Carboxylic Acid Amides

Acyl iodides RCOI (R = Me, Ph) reacted with N,N-dimethylformamide and N,N-dimethylacetamide Me₂NC(=O)R’ (R’ = H, Me) along two concurrent pathways involving transacylation and cleavage of the Me-N bond. The first pathway leads to the formation of acyl group exchange products, and the second, to the corresponding imides R’CON(Me)COR.     

Rhenium(V) complexes with vinyl amides

Summary The reactions oftrans-ReOCl₃(PPh₃)₂ with vinyl amides such as RCOCH=C(R)NH₂, where R = CH₂CH₂CO₂H and R = Ph and C₆H₁₃; or R = Me, CH₂CH₂CO₂Me and R = Ph, give complexes of the type ReOCl₂-[RC(O^–)=CHC(R)=NH]PPh₃, the coordination geometry of which have been deduced from i.r. and¹H n.m.r. spectroscopic data.     

Copper(I) complexes of pentatomic heterocyclic selone donors

Summary New complexes of copper(I) with some heterocyclic pentatomic rings, X·CH₂·CH₂·NR·CSe, where X=CH₂, NH, NMe, NEt, S and R=H, Me, Et, were prepared by reacting copper(II) chloride and bromide in MeOH. The stoichiometry of the complexes and the binding mode of the ligands have been discussed comparatively, together with those of the thione parents. It is noteworthy that the selone ligands with R=H (L) yield complexes of the type CuL_nY, (n=1,2 or 3; Y=Cl or Br) like the corresponding thione ones. On the contrary, when R=Me or Et, the selonic ligands (L) give complexes whose stoichiometries, Cu₂LY₂ and Cu₃L₂Y₃, differ from the thione homologues. The i.r. spectra of the complexes compared with those of the ligands support the coordinative bondvia selenium atom.     

“Short-bite” ligands in cluster synthesis

The short-bite ligands CH₂(PR ₂)₂ or CH(PR ₂)₃ (R = Me, Ph),RN(PX ₂)₂ (R=H, Me, Et;X = F, OR (R= Me, Et, i-Pr, Ph), Ph),RE(CH₂ ER₂)₂ (E = P, As;R = Me, Ph ), Ph₂ P(2-C₅H₄N) and related species are particularly versatile for the synthesis of di- and polynuclear complexes which frequently possess metal-metal bonds. In addition to homometallic products, these ligands often permit the directed synthesis of heterometallic complexes. Selected aspects of the chemistry of these complexes are also reviewed.     

Synthesis and1H NMR study of some organotin derivatives of diethanolamines

A number of organotin derivatives of diethanolamines (stannocanes) R₂Sn(OCH₂CH₂)₂NR', O(SiMe₂CH₂)₂Sn(OCH₂CH₂)₂NR', and Sn[(OCH₂CH₂)₂NR']₂ (R = Ph,cyclo-Hex; R' = H, Me, Ph) were synthesized and studied by¹H NMR spectroscopy. The effect of steric factors on the ability of molecules of stannocanes to form associates in solutions is discussed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp.714–718, April, 1994.     

NEW NONGEMINAL CYCLOPHOSPHAZENES

A series of new nongeminally-substituted cyclic phosphazenes with various substituents has been prepared via deprotonation-substitution reactions at the Me groups of both the cis and trans isomers of [(Me)(Ph)PN] ₃ . Treatment of [(Me)(Ph)PN] ₃ with n-BuLi followed by reaction with organic electrophilic reagents affords a variety of cyclic derivatives, [(RCH ₂ )(Ph)PN] ₃ , [R = Me, Cl, Br, I, (CH ₂ ) ₂ Br, CH ₂ CH═CH ₂ , SR, C(═O)OLi, C(═O)OMe, C(═O)OEt]. The structures of theses cis cyclic phosphazenes, which were obtained by x-ray diffraction, illustrate the basket-like shape of the molecules. Heating the cis and trans isomers of the parent [(Me)(Ph)PN] ₃ produced mixtures of cyclic trimers and tetramers. The latter were isolated and characterized by x-ray crystallography. Nanoparticles of gold and silver were prepared by reduction of metal salts with a reducing agent in the presence of selected trimers.     

Action des hydrazines fluoroalkylées sur les phosphoallènes: synthèse d’hydrazones N-fluoroalkylées β-phosphonatées

Ten phosphorylated β-hydrazones of structure R₂P(O)C(NNHR_F)CHR₂′ were prepared in 54-91% yield by heating the allenes R₂P(O)CHCCR₂′ with fluorinated hydrazines H₂NNHR_F in chloroform or methanol [R=Ph, OCH₂C(Me)₂CH₂O or OCH₂C(Me)(Pr)CH₂O, R′=H or Me and R_F=CH₂CF₃ or C₆F₅]. Two cyclohexyl derivatives were prepared similarly from R₂P(O)CHCCy. The triphenyl derivatives Ph₂P(O)CH₂C(NNHCH₂CF₃)Ph and Ph₂P(O)CH₂C(NNHC₆F₅)Ph were made in 91 and 68% yield by heating the ketones Ph₂P(O)CH₂C(O)Ph with an ethanol solution of the corresponding hydrazines. The stereochemistry of the hydrazones was determined by multinuclear NMR experiments. Compounds with C(NNHR_F)Me groups exist as a mixture of Z and E isomers, with the Z form predominating (fluorinated group syn to phosphorus). Those with C(NNHR_F)CHMe₂, C(NNHR_F)Cy or C(NNHR_F)Ph groups were formed selectively, the Z isomers being the only products. The results are explained by steric hindrance, the bulkier isopropyl, cyclohexyl or phenyl group disfavouring the E configuration. , , , NMR data, coupling constants and IR data are reported.     

Acyl iodides in organic synthesis: VII. Reactions with trialkyl(alkynyl)silanes,-germanes, and-stannanes

Reactions of acyl iodides R¹COI (R¹=Me, Ph) with trialkyl(alkynyl)silanes,-germanes, and stannanes (R²C≡CMR ₃ ³ ; M=Si, Ge, Sn) were studied. Acyl iodides reacted with the germanium and tin derivatives with cleavage of the M-C_sp bond and formation of the corresponding trialkyl(iodo)germanes and-stannanes R ₃ ³ MI (M=Ge, Sn) and alkynyl ketones R¹C(O)C≡CR² and R¹C(O)C≡CC(O)R¹. By contrast, the reaction of acetyl iodide with ethynyl(trimethyl)silane gave only a small amount of 1,2-diiodovinyl(trimethyl) silance as a result of iodine addition at the triple bond. Bis(trimethylsilyl)ethyne failed to react with acetyl iodide.     

Acyl iodides in organic synthesis: XII. Reactions with organosilicon amines

Reactions were investigated between acyl iodides RCOI (R = Me, Ph) and organosilicon amines of two classes: trimethyl(diethylamino)silane, dimethyl-bis(diethylamino)silane, and hexamethyldisilazane on the one hand, and 3-aminopropyl(triorganyl)silanes H₂N(CH₂)₃SiX₃ (X = Et, EtO) on the other hand. The reaction of RCOI with trimethyl(diethylamino)silane Me₃SiNEt₂ occurred with a cleavage of the Si-N bond and the formation of N,N-diethylacet- or -benzamides and trimethyliodosilane separated in a mixture with hexamethyldisiloxane. At the reaction of acyl iodides RCOI (R = Me, Ph) with dimethyl-bis(diethylamino)silane in the ratio 2:1 in benzene solution both Si-N were ruptured leading to the diethylamide of the corresponding acid and dimethyldiiodosilane. The main product of the reaction of acetyl iodide with hexamethyldisilazane at the molar ratio 2:1 was diacetylimide (MeCO)₂NH. This reaction can be recommended as a simple and convenient preparation procedure for diacylimides. The exothermal reaction of the acetyl iodide with 3-aminopropyl(triethyl)- and -(triethoxy)silanes at the molar ratio of the reagents 1:1 without solvent resulted in quaternary ammonium salts, hydroiodides of the corresponding acetylamides I^?MeCON⁺H₂(CH₂)₃SiX₃ (X = Et, OEt).     

Enol ethers and acetals: acylation with dichloroacetyl,acetyl and benzoyl chloride in ionic liquid medium

Synthesis of 4-alkoxy-1,1-dichloro-3-alken-2-ones [CHCl₂C(O)C(R²)C(R¹)-OR, where R, R¹, R² = Et, H, H; Me, Me, H; Et, H, Me; Me, –(CH₂)₂–; Me, –(CH₂)₃–; Et, Et, H; Et, Bu, H; Et, i-Pr, H; Et, i-Bu, H; Me, Ph, H; Me, thien-2-yl, H] from acylation of enol ethers and acetals with dichloroacetyl chloride, in ionic liquid ([BMIM][BF₄] or [BMIM][PF₆]) is reported. The synthesis of alkenones [R³–C(O)C(R²)C(R¹)-OR], where R/R¹/R²/R³ = Et/H/H/Ph, t-Bu/H/H/Ph, Me/-(CH₂)₄/Ph, Me/-(CH₂)₄/Me] from the reaction of enol ethers with benzoyl chloride or acetyl chloride, in ionic liquid [BMIM][BF₄], is also reported. Last products are described for the first time.     

Olefin uptake as tool for linking platinum(II) and iridium(III) in heterobinuclear complexes: Synthesis and characterization of [PtI2(Me2phen){(C5Me4CH2CH2CHCH2)Ir(Me)(CO)(Ph)}]

The ability of [PtX₂(Me₂phen)] (Me₂phen = 2,9-dimethyl-1,10-phenanthroline, X = Cl, Br, I) to act as olefin scavengers, easily giving stable trigonal bipyramidal five-coordinated platinum species [PtX₂(Me₂phen)(η²-olefin)], has been checked toward [(C₅Me₄CH₂CH₂CHCH₂)Ir(Me)(CO)(Ph)], a cyclopentadienyl complex containing an olefinic function introduced by ring methyl activation in the pentamethylcyclopentadienyl iridium(III) complex [(C₅Me₅)Ir(Me)(CO)(Ph)]. The reaction of [PtI₂(Me₂phen)] with [(C₅Me₄CH₂CH₂CHCH₂)Ir(Me)(CO)(Ph)] results in the formation of the heterometallic binuclear complex [PtI₂(Me₂phen){(C₅Me₄CH₂CH₂CHCH₂)Ir(Me)(CO)(Ph)}] which is stable and has been completely characterized by elemental analysis, ¹H, ¹³C, and ¹⁹⁵Pt NMR spectroscopy.     

Synthesis and structures of new 1,3,6,2-dioxazaborocanes containing substituents in the ocane fragment

New 1,3,6,2-dioxazaborocanes R¹N(CHR³CR⁴R²O)(CHR⁶CHR⁵O)BX (1–11, X = Ph, 4-MeC₆H₄, Me; R¹ = Me, PhCH₂; R², R³, R⁴, R⁵, R⁶ = H, Ph) were synthesized by the reactions of aryl- or methylboronic acids with dialkanolamines. The treatment of (Me₂NCH₂CH₂O)₃B (15) with MeN(CH₂CH₂OH)(CH₂CPh₂OH) afforded 2-[2-(dime-thylamino)ethoxy]-1,3,6,2-dioxazaborocane (12). 2-Fluoro-1,3,6,2-dioxazaborocanes R¹N(CHR³CHR²O)(CH₂CH₂O)BF (13: R¹ = PhCH₂, R² = R³ = H; 14: R¹ = Me, R² = R³ = Ph, threo) were synthesized by the reaction of bis(trimethylsilyl) ethers of the corresponding dialkanolamines with BF₃·Et₂O. The new borocanes can be used for the synthesis of the corre-sponding germanium derivatives PhCH₂N(CH₂CH₂O)₂GeX₂ (16, X = OEt; 17, X = Cl), as exemplified by the reaction of compound 6. The structures of erythro-MeN(CH₂CH₂O)(CHPhCHPhO)BPh (3), threo-MeN(CH₂CH₂O)(CHPhCHPhO)BPh (4), erythro-MeN(CH₂CH₂O)(CHPhCHPhO)B(4-MeC₆H₄) (8), and PhCH₂N(CH₂CH₂O)₂BF (13) were established by X-ray diffraction. The coordination polyhedra of the boron atoms in these complexes can be described as distorted tetrahedra. The boron-nitrogen distances (1.705(7)–1.723(3) Å) provide unambiguous evidence for the presence of the B←N transannular interaction in these compounds. The structures of the resulting borocanes containing phenyl substituents at the carbon atoms of the ocane skeleton were studied by NMR spectroscopy and quantum chemical density functional theory calculations.     

N-(Chlorodimethylsilyl)methyl anilides: synthesis and structure

N-(Chlorodimethylsilyl)methyl anilides of formula RC(O)N(C₆H₄X)CH₂SiMe₂Cl (R = Me, Ph; X = H, Me, Cl) were obtained by the reaction of N-TMS-containing anilides with ClCH₂Si(Hal)Me₂ (Hal = F, Cl). The silicon atom in these compounds is pentacoordinate according to the results of NMR and X-ray diffraction analysis.     

Mixed-ligand oxovanadium(V) complexes incorporating bidentate salicylaldehyde and tridentate aldimine ligands

Summary Mixed-ligand oxovanadium(V) complexes, [V^VO(L)-(sal)], containing salicylaldimine ligands of -amino acids H₂L [(1);R = Me, i-Pr and CH₂Ph] and salicylaldehyde (Hsal) have been synthesized. The coordination sphere of the complexes is of the VO(ONO)(OO) type, where O atoms are phenolic, carboxylic and aldehydic, and N is of the azomethine type. The complexes are diamagnetic and exhibit only one LMCT band at ca. 490 nm. They display quasi-reversible one-electron reduction peaks in a CH₂Cl₂-MeCN (21v/v) mixture in the 0.07–0.13V versus s.c.e. range. A trend in the redox potential data has been rationalized on the basis of conventional normal substituent effects.     

Synthesis and characterization of chlorodiorganotin(IV) derivatives of O,O-alkylene dithiophosphates

The O,O-alkylene dithiophosphates of chlorodiorganotin(IV), (where R = Me, G =–CMe₂CMe₂–; R = Me, Bu; G =–CH₂CMe₂CH₂–, and R = Me, Bu, Ph; G =–CHMeCH₂CMe₂–) have been synthesized by reactions of diorganotindichloride with the ammonium salts of O,O-alkylene dithiophosphates in 1 : 1 molar ratio in benzene. These compounds have been characterized by IR, ¹H, ¹³C, ³¹P, and ¹¹⁹Sn NMR spectroscopy. Unlike triorganotin derivatives, the ligand is bidentate in these derivatives.     

Synthesis and magnetic properties of copper(II) bis(phenylsulphinyl)ethane complexes

Summary Two Cu^II complexes, [Cu₂(-L)Cl₄·H₂O (1) and Cu₂(-L)Cl₄ (2) [-L and -L = meso- and rac-PhS(O)(CH₂)₂S(O)Ph, respectively], were synthesized and characterized by elemental analysis, i.r. spectra and molar conductances. In each case, the Cu^II ion bonds to the 557-01 moiety through oxygen, and may be bridged by the ligand (-L or -L). From magnetic moment measurements at room temperature and variable temperature magnetic susceptibilities, we suggest that complexes (1) and (2) exhibit weak ferromagnetic behaviour.