Crystal structure of the quaternary compound CuTa2InTe4 from X-ray powder diffraction

The crystal structure of the new quaternary compound CuTa₂InTe₄ was studied using X-ray powder diffraction data. The powder pattern refined by the Rietveld method indicates that this material crystallizes in the tetragonal system with space group I-4¯2m (No. 121), Z=2, and unit cell parameters a=6.1963(2) Å, c=12.4164(4) Å, c/a=2.00 and V=476.72(3) Å³. The structural and instrumental refinement of 28 parameters led to R_p=10.4%, R_wp=11.1%, R_exp=6.8% and χ²=2.7 for 96 independent reflections.     

Ab initio calculations and experimental determination of the structure of Cr2AlC

We have calculated the equilibrium volume and the density of states (DOS) of Cr₂AlC for antiferromagnetic (AFM), ferromagnetic (FM) and paramagnetic (PM) configurations by ab initio total energy calculations. Based on a comparison of the cohesive energies as well as the DOS for all three magnetic configurations we have identified the FM configuration to be metastable. Furthermore, we report the structural characterization of polycrystalline Cr₂AlC thin films grown by magnetron sputtering. Our calculated interplanar distances and equilibrium volume for the PM and AFM configurations are in good agreement with our experiment. The charge density distribution suggests that the chemical bonding between Cr and C in Cr₂AlC is very similar to the one in cubic CrC.     

High pressure X-ray diffraction and electrical resistance study of the quasi-one-dimensional sulfide InV6S8

The ambient structural details and the results of room temperature high pressure angle dispersive X-ray diffraction and electrical resistance measurements on the quasi-one-dimensional sulfide, InV₆S₈, to a pressure of 25 GPa are reported. The material does not undergo a phase transition in this pressure range, though an anomaly in the c/a ratio has been observed around 10 Gpa. A fit of the Murnaghan equation of state to the V/V₀ versus pressure data, with the value of the derivative of B₀ with respect to pressure, B′₀, fixed at 4 has yielded a value of the bulk modulus, B₀, of 110 GPa. We also present data of the pressure dependence of the lattice constants, a and c, the ratio c/a, and the resistance at room temperature.     

High pressure phase transition in metallic LaB6: Raman and X-ray diffraction studies

High pressure Raman and angle dispersive X-ray diffraction (ADXRD) measurements on the metallic hexaboride LaB₆ have been carried out upto the pressures of about 20 GPa. The subtle phase transition around 10 GPa indicated in Raman measurements is confirmed by ADXRD experiments to be a structural change from cubic to orthorhombic phase. Ab-initio electronic band structure calculations using full potential linear augmented plane wave method carried out as a function of pressure show that this transition is driven by the interception of Fermi level by electronic band minimum around the transition pressure.     

Variable-temperature Raman scattering and X-ray diffraction studies of Bi3.25Nd0.75Ti3O12 ceramics

Neodymium-substituted bismuth titanate (Bi_3.25Nd_0.75Ti₃O₁₂, BNT_0.75) ceramics was prepared by chemical co-precipitation along with calcinations. The lattice instability has been investigated by variable-temperature Raman scattering and X-ray diffraction. The results showed that there was an orthorhombic to pseudo-tetragonal phase transition at about 695 K, in terms of the evolution of temperature dependence of Raman scattering frequencies. Some changes at about 695 K in the XRD lines, the lattice parameters (a, b, and c) as well as the orthorhombic distortion b/a have been detected in the high temperature X-ray diffraction, which confirmed the conclusion that the BNT_0.75 ceramics undergoes a ferroelectric to paraelectric phase transition at about 695 K.     

X-ray and neutron powder diffraction study of the monoclinic perovskites Sr2MSbO6 (M=In, Y)

The structures of the perovskites Sr₂InSbO₆ and Sr₂YSbO₆ have been investigated by X-ray and neutron powder diffraction. Both compounds are of monoclinic distortion, space group P2₁/n, with the lattice parameters related to that of the ideal cubic-perovskite (a_p) by a_p, c≈2a_p and β≈90°. The distortions that occur in Sr₂InSbO₆ and Sr₂YSbO₆ can be viewed as due to the octahedral tilts around both the two-fold [110]_p- and the four-fold [001]_p-axis of the cubic aristotype with the oxygen's shifted away from the In/Y(III) ions towards the Sb(V) ions, creating an ordered arrangement of the alternating InO₆/YO₆ and SbO₆ octahedra.     

Atomic topology and radial distribution functions of a-SiNx alloys: ab initio simulations

Random structures of amorphous silicon-nitrogen alloys, a-SiN_x, are obtained for several values of x from 0 to the nearly stoichiometric composition of x=1.29, using a new ab initio thermal procedure based on a Harris-functional code and periodically continued cells with 64 atoms. Partial radial features are reported with no experimental counterparts for comparison, whereas the total radial distribution functions agree very well with the few existing experiments. Our average coordination numbers also agree very well with experiment. These results, being predictive, may stimulate further experimental and theoretical studies.     

Properties of Sr2FeMoO6 thin films fabricated by the chemical solution deposition method

We fabricated the ordered Sr₂FeMoO₆ (SFMO) thin film with a double perovskite structure using the chemical solution deposition (CSD) method. The highly c-axis oriented SFMO thin film with a high degree of Fe/Mo ordering was successfully synthesized on an MgO (001) substrate by optimizing processing conditions. The precise preparation process control of the SFMO precursor solution leads to a typical magnetoresistance effect in a low magnetic field at room temperature.     

Physico-chemical characterization of electrochemical deposit of Ca10(PO4)6(OH)2 on copper surfaces

Surface modification of biomaterials to improve biocompatibility without changing their bulk properties is desired for many clinical applications and has become an emerging technology in biomaterial research and industry. In the present study, a sample electrochemical method of coating the solid surfaces of copper, with a film of apatite, was developed. Thin layer of calcium phosphate crystals formed on the surfaces of copper, was carried out by electrochemical methods, and characterized by XRD, infrared spectroscopy and chemical analysis.     

First-principles calculations of the electronic and optical properties of In6S7 compound

The electronic structure and the optical properties of In₆S₇ crystal are calculated by the first-principles full-potential linearized augmented plane wave method (FP-LAPW) using density functional theory (DFT) in its generalized gradient approximation (GGA). The calculated band structure shows that the In₆S₇ is a semiconductor with a direct band gap in good agreement with experimental studies. Furthermore, the dielectric tensor and the optical properties, such as absorption coefficient, refractive index, extinction coefficient, energy-loss spectrum and reflectivity, are derived and analyzed in the study.     

Extended X-ray absorption fine structure (EXAFS) and X-ray absorption near-edge structure (XANES) study of melt-spun Fe85Ga15 ribbons

The local structure in melt-spun Fe₈₅Ga₁₅ ribbons with a width ∼3 mm and thickness ∼60 μm produced in argon atmosphere was studied by analyzing EXAFS and XANES data. The following results were obtained: Ga–Ga bonds were not detected excluding the tendency to form clusters of Ga atoms; Ga substitutes Fe creating a local strain of about +1% on the first shell Fe–Ga bond, whereas on the second Fe–Ga shell strain quickly relaxes down to +0.3%; XANES spectra are compatible with a random substitution of Fe atoms by Ga atoms in the A2 structure. From the AFM investigation, we observed that at the surface (free side) of the ribbon the particles are elongated along the ribbon (∼2 μm×∼5 μm) and each particle is formed by small grains of average size of 200 nm.     

Raman scattering and X-ray diffraction study of structural phase transitions in the perovskite-type layer compound (C3H7NH3)2CdCl4

The structural phase transitions of (C₃H₇NH₃)₂CdCl₄ (PACC) have been studied by means of Raman scattering. X-ray diffraction and DSC measurements It is shown that the order-disorder phase transition Abma ? Pbca occurs at 156 K and not at 183 K as previously proposed by Chapuis (Acta CrystB34, 1506 (1978)) Apparently, the transition at 183 K does not change the Abma space group; it is suggested that it could be related to the occurrence of an incommensurate phase Another structural transformation of PACC is detected at 114 K, but no conclusion can be given as far as the structure of the low-temperature phase is not determined.     

First-principles studies of magnetic properties and electronic structure of EuC60

The full potential linearized augmented plane wave (FP-LAPW) method with the GGA+U approach was applied to study the electronic structures of the compound Eu₆C₆₀. Present calculations show that the hybridization between the Eu s, d state and the C₆₀ π states plays an essential role in its FM exchange interactions between the 4f electrons and metallic properties.     

The first principle study on the electronic structure and spin ordering of the rare earth palladium sulfide, EuPd3S4

We have performed relativistic first-principles full-potential linearized augmented plane wave (FLAPW) calculation for rare earth palladium sulfide EuPd₃S₄ in the ferromagnetic and antiferromagnetic states. The density of 4f electrons of Eu is taken from a local-spin-density approximation self-interaction correction (LSDA-SIC) atomic calculation. EuPd₃S₄ is found to exhibit antiferromagnetic ordering in its ground state. The charge, orbital, magnetic moment and spin ordering are explained with the electronic structure, the orbital-projected density of states and the total energy study. EuPd₃S₄ is found to be stable in the body-centered Type-I antiferromagnetic state, in agreement with experimental results. Different Eu states are found in antiferromagnetic ordering. The magnetic moments of different states obtained through spin-polarized calculation are also in good agreement with experimental results. The phenomena observed are explained by the orbital hybridization of Eu and Pd ions as compared with the free ions.     

Electronic structure of CeAl2 thin films studied by X-ray absorption spectroscopy

We report X-ray absorption near edge structures (XANES) study of CeAl₂ thin films of various thicknesses, 40-120 nm, at Al K- and Ce L₃-edges. The threshold of the absorption features at the Al K-edge shifts to the higher photon energy side as film thickness decreases, implying a decreased in Al p-orbital charges. On the other hand, from Ce L₃-edge spectra, we observed a decrease in the 5d4f occupancy as the surface-to-bulk ratio increases. The valence of Ce in these thin films, as revealed by the Ce L₃-edge spectral results, is mainly trivalent. From a more detailed analysis we found a small amount of Ce⁴⁺ contribution, which increases with decreasing film thickness. Our results indicate that the surface-to-bulk ratio is the key factor which affects the electronic structure of CeAl₂ thin films. The above observations also suggest that charge transfer from Al to Ce is associated with the decrease of the film thickness.     

On the symmetry and structure of the double perovskites Ba2LnRuO6 (Ln=La, Pr and Nd)

The structures of the double perovskites Ba₂LnRuO₆ (Ln=La, Pr and Nd) at room temperature were re-investigated by profile analysis of X-ray diffraction data. It has been shown that neither the triclinic nor the monoclinic P2₁/n space group correctly describes their structures. Ba₂LaRuO₆ is actually rhombohedral, space group , cell parameters a=6.03196(10) Å and α=60.298(2)°. On the other hand, both Ba₂PrRuO₆ and Ba₂NdRuO₆ are found to be cubic, space group , with the cell parameters a=8.48416(6) and 8.47061(5) Å, respectively.     

Structural relation and epitaxial properties of hexagonal InN and oxidized cubic In2O3

The epitaxial properties and structural relation between hexagonal InN and cubic In₂O₃ phases were studied by synchrotron X-ray scattering and X-ray photoelectron spectroscopy. The cubic bixbyite In₂O₃ phase on the sapphire(0001) substrate was formed after an annealing time of 10 min at 10⁻⁵ Torr after the hexagonal InN film was grown at 550 °C, above the dissociation temperature of InN, by RF-magnetron sputtering. The crystal orientation was cubic In₂O₃(222), parallel to Al₂O₃(0001) and parallel to hexagonal InN(0002) before the oxidation process. The cubic In₂O₃ phase was believed to be formed layer by layer by the oxidation of the hexagonal InN phase.     

Structure of the low-temperature phase of Rb3D(SeO4)2 by single-crystal neutron diffraction

Crystal structure of Rb₃D(SeO₄)₂ has been investigated at 25 K (below the transition temperature T_c=95.4 K) by single-crystal neutron diffraction. Accompanying the transition, the SeO₄ groups, which are all equivalent in the phase above the transition (space group A2/a), split into eight nonequivalent groups in a superlattice (a×2b×2c, space group A2) in the low-temperature phase. Based on the D atom positions obtained, each of the SeO₄ groups was identified to be in the state closer to a HSeO₄⁻ ion or to a SeO₄²⁻ ion and the dipole arrangement of SeO₄-D-SeO₄ dimer was revealed. This dipole arrangement has ‘ferri’ structure along the polar b-axis, but ‘antiferro’ structure in the plane perpendicular to the b-axis. These results are consistent with the characteristics found in the earlier dielectric measurements.     

First-principles study on electronic structure of LiFePO4

The electronic structure and band structure of olivine LiFePO₄ and its virtually delithiated product FePO₄ are compared based on first-principles calculations. It is found that Li intercalation mainly impacts the electronic and band structures of the Fe atom. Total static energy calculations indicate that it is more difficult for lithium to transfer in LiFePO₄ than in FePO₄.     

High pressure X-ray diffraction study of Fe2B

We report the results of a synchrotron based X-ray diffraction study of bct-Fe₂B under quasi-hydrostatic conditions from 0 to 50 GPa. Over this pressure range, no phase change or disproportionation has been observed. A weighted fit of the data to the Birch-Murnaghan equation of state yields a value of the bulk modulus, K, of 164±14 GPa and the first pressure derivative of the bulk modulus, K′, of 4.4±0.5. The compression is found to be anisotropic, with the a-axis being more incompressible than the c-axis.