Solution route to inorganic nanobelt‐conducting organic polymer core‐shell nanocomposites

A facile and versatile solution‐based approach was developed to prepare semiconductor metal oxide nanobelt‐conducting organic polymer core‐shell nanocomposites. Well‐defined nanobelts of several types of oxide nanobelts were combined with conducting polymer [polypyrrole (PPy) and polyaniline (PANi)] via in situ polymerization in aqueous solution to obtain a new type of inorganic–organic composite nanostructure. Samples were characterized by using X‐ray diffraction, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared, electron energy loss spectra, high‐resolution transmission electron microscopy, and ultraviolet–visible techniques. Electron energy loss spectra revealed the existence of C?C and C? N bonds in coating layers to prove the encapsulation of PPy or PANi. The red‐shift of absorption band at high‐energy was observed for PPy‐encapsulated composites via ultraviolet–visible spectroscopy, and significant absorption band shifts were also encountered to PANi‐encapsulated composites, which suggest possibilities of band‐gap tuning of such metal oxide‐conducting polymer composites to be applied especially in solar cell devices. However, the sacrifice of nanobelts‐core led to hollow structures of PPy and PANi, which expands the synthetic strategies to prepare conducting polymer nanotubes. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2892–2900, 2005     

Aligned single‐wall carbon nanotube polymer composites using an electric field

While high shear alignment has been shown to improve the mechanical properties of single‐wall carbon nanotube (SWNT)‐polymer composites, this method does not allow for control over the electrical and dielectric properties of the composite and often results in degradation of these properties. Here, we report a novel method to actively align SWNTs in a polymer matrix, which permits control over the degree of alignment of the SWNTs without the side effects of shear alignment. In this process, SWNTs were aligned via AC field‐induced dipolar interactions among the nanotubes in a liquid matrix followed by immobilization by photopolymerization under continued application of the electric field. Alignment of SWNTs was controlled as a function of magnitude, frequency, and application time of the applied electric field. The degree of SWNT alignment was assessed using optical microscopy and polarized Raman spectroscopy, and the morphology of the aligned nanocomposites was investigated by high‐resolution scanning electron microscopy. The structure of the field induced aligned SWNTs was intrinsically different from that of shear aligned SWNTs. In the present work, SWNTs are not only aligned along the field, but also migrate laterally to form thick, aligned SWNT percolative columns between the electrodes. The actively aligned SWNTs amplify the electrical and dielectric properties of the composite. All of these properties of the aligned nanocomposites exhibited anisotropic characteristics, which were controllable by tuning the applied field parameters. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1751–1762, 2006     

Synthesis of core‐shell silver–polyaniline nanocomposites by gamma radiolysis method

Core‐shell silver (Ag)–polyaniline (PAni) nanocomposites have been synthesized by the in‐situ gamma radiation‐induced chemical polymerization method. Aqueous solution of aniline, a free‐radical oxidant, and/or silver metal salt were irradiated by γ‐rays. Reduction of the silver salt in aqueous aniline leads to the formation of silver nanoparticles which in turn catalyze oxidation of aniline to polyaniline. The resultant Ag‐PAni nanocomposites were characterized by using different spectroscopy analyses like X‐ray photoelectron, UV–visible, and infrared spectroscopy. The optical absorption bands revealed that the bands at about 400 nm are due to the presence of nanosilver and the blue‐shifted peak at ～ 555 nm is due to the presence of metallic silver within the PAni matrix. X‐ray diffraction pattern clearly indicates the broad amorphous polymer and the sharp metal peaks. Scanning electron microscopy and transmission electron microscopy of the nanocomposite showed a uniform size distribution with spherical and granular morphology. Thermogravimetric analysis revealed that the composites have a higher degradation temperature than polyaniline alone. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5741–5747, 2007     

Pinecone‐like Cu(II) crystal growth on the surface of amine‐group‐immobilized polymers

Field‐emission scanning electron microscopy (FESEM) was used to monitor pinecone‐like Cu(II) crystal growth on polymeric fibers for various growth times. In FESEM images, Cu(II) complexes and Cu(OH)₂ crystal growth on poly(acryloamidino ethylene amine) and poly(acryloamidino diethylenediamine) were observed. Up to an elapsed time of 16 min, crystal growth was observed in only one direction. However, after an elapsed time of 20 h, pinecone‐like crystals covered the entire surfaces of the synthesized polymers. Fourier transform infrared spectroscopy, X‐ray diffraction, and X‐ray photoelectron spectroscopy were used for analysis. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1238–1247, 2005     

Coagulation method for preparing single-walled carbon nanotube/poly(methyl methacrylate) composites and their modulus,electrical conductivity,and thermal stability

A coagulation method providing a better dispersion of single-walled carbon nanotubes (SWNTs) in a polymer matrix was used to produce SWNT/poly(methyl methacrylate) (PMMA) composites. Optical microscopy and scanning electron microscopy showed an improved dispersion of SWNTs in the PMMA matrix, a key factor in composite performance. Aligned and unaligned composites were made with purified SWNTs with different SWNT loadings (0.1–7 wt %). Comprehensive testing showed improved elastic modulus, electrical conductivity, and thermal stability with the addition of SWNTs. The electrical conductivity of a 2 wt % SWNT composite decreased significantly (>10⁵) when the SWNTs were aligned, and this result was examined in terms of percolation. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3333–3338, 2003     

Synthesis of TiO2–SiO2/polymer core–shell microspheres with a microphase‐inversion method

A novel microphase‐inversion method was proposed for the preparation of TiO₂–SiO₂/poly(methyl methacrylate) core–shell nanocomposite particles. The inorganic–polymer nanocomposites were first synthesized via a free‐radical copolymerization in a tetrahydrofuran solution, and the poor solvent was added slowly to induce the microphase separation of the nanocomposite and result in the formation of nanoparticles. The average particle sizes of the microspheres ranged from 70 to 1000 nm, depending on the reaction conditions. Transmission electron microscopy and scanning electron microscopy indicated a core–shell morphology for the obtained microspheres. Thermogravimetric analysis and X‐ray photoelectron spectroscopy measurements confirmed that the surface of the nanocomposite microspheres was polymer‐rich, and this was consistent with the core–shell morphology. The influence of the synthetic conditions, such as the inorganic composition and the content of the crosslinking monomer, on the particle properties was studied in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3911–3920, 2006     

Grafting of aldehyde structures to single‐walled carbon nanotubes for application in phenolic resin‐based composites

Grafting of aldehyde structures to single‐walled carbon nanotubes (SWNTs) has been carried out to endow the nanotubes with appropriate wettability. The results of Fourier transform infrared (FTIR) spectroscopy, ultraviolin‐visible‐near infrared (UV‐VIS‐NIR) spectroscopy, and Raman spectroscopy provide the supporting evidence of aldehyde structures covalently attached to SWNTs. The improved wettability of aldehyde‐functionalized SWNTs (f‐SWNTs) was demonstrated by their good dispersion in organic medium, namely, ethanol and phenolic resin. The prospective covalent bonding between aldehyde structures on the surfaces of f‐SWNTs and phenolic resin makes it possible to prepare an integrated composite with the enhanced‐interfacial adhesion. The f‐SWNT composites, therefore, show much higher average values of dσ/dW_CNT and dE/dW_CNT (i.e., tensile strength and Young's modulus per unit weight fraction) compared with the composites filled with pristine SWNTs or MWNTs. The respective maxima are 9680 MPa and 320 GPa. It is thus feasible for f‐SWNTs to prepare the moderately enhanced but lightweight phenolic composites. Furthermore, the incorporation of f‐SWNTs does not limit the application of phenolic resin as insulation material. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6135–6144, 2009     

Preparation and ferromagnetic properties of Ni0.5Zn0.5Fe2O4/polyaniline core–shell nanocomposites

Magnetic Ni_0.5Zn_0.5Fe₂O₄‐crosslinked polyaniline composites with a core–shell structure were prepared in the presence of Ni_0.5Zn_0.5Fe₂O₄ magnetic powder in a toluene solution containing iron chloride as a surfactant and dopant. Structural characterization by Fourier transform infrared, X‐ray diffraction, scanning electron microscopy, and transmission electron microscopy proved that Ni_0.5Zn_0.5Fe₂O₄ in the composites was responsible for the ferromagnetic behavior of the composites. The effects of the polyaniline and temperature on the magnetic properties of the Ni_0.5Zn_0.5Fe₂O₄/polyaniline composites were studied with electron paramagnetic resonance and superconducting quantum interference device techniques. A clear evolution from ferromagnetic resonance to electron paramagnetic resonance was observed as a function of temperature, which was related to the passage through the Curie point (～420 K). The magnetic properties of the resulting composites showed ferromagnetic behavior, such as high‐saturated magnetization (saturation magnetization = 35–39 emu/g), low coercive force (coercivity = 22–28 G), and low blocking temperatures (～23 K). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2657–2664, 2006     

A facile route to hollow superparamagnetic magnetite/polystyrene nanocomposite microspheres via inverse miniemulsion polymerization

In this article, we report a facile route to the preparation of hollow superparamagnetic magnetite/polystyrene nanocomposite microspheres via inverse miniemulsion polymerization at room temperature and under ambient pressure. Water droplets act as a soft template for the formation of hollow structure. Meanwhile, the existence of amphipathic magnetite nanoparticles (MPs) which can assemble at the interface of W/O is favorable to the interfacial polymerization of styrene, ensuring the formation of hollow nanocomposite microspheres. The final products were thoroughly characterized by X‐ray powder diffraction (XRD), fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), field‐emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), and X‐ray photoelectron spectroscopy (XPS), which showed the formation of hollow magnetite/polystyrene nanocomposite microspheres. Magnetic hysteresis loop measurements revealed that both MPs and hollow nanocomposite microspheres displayed superparamagnetism. The effects of the content of H₂O, sorbitan monooleate (Span 80) and styrene and the dose rate on the morphology of nanocomposite microspheres were studied. Furthermore, the mechanism of the formation of the hollow magnetic microspheres was also discussed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3900–3910, 2008     

Grafting of polyaniline onto the surface of 4‐aminobenzoyl‐functionalized multiwalled carbon nanotube and its electrochemical properties

Polyaniline (PANi)‐grafted multiwalled carbon nanotube (MWNT) composite is prepared by a two‐step reaction sequence. MWNT is first functionalized with 4‐aminobenzoic acid in polyphosphoric acid/phosphorous pentoxide as a “direct” Friedel‐Crafts acylation reaction medium. The resultant 4‐aminobenzoyl‐functionalized MWNT is then treated with aniline using ammonium persulfate/aqueous hydrochloric acid to promote a chemical oxidative polymerization, leading to PANi‐grafted MWNT composite. The resultant composite is characterized by elemental analysis, Fourier‐transform infrared spectroscopy, wide‐angle X‐ray diffraction, scanning electron microscopy, transmission electron microscopy, thermogravimetric analysis, UV–vis absorption spectroscopy, fluorescence spectroscopy, cyclic voltammetry, and electrical conductivity measurement. The thermooxidative stability and electrical conductivity of PANi‐grafted MWNT composite are improved compared to those of PANi. Specifically, the electrical conductivity of PANi‐grafted MWNT is improved 10–900 times depending upon the level of doping. The capacitance of the composite is also greatly enhanced. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3103–3112, 2010     

Synthesis and Characterization of Multi‐Walled Carbon Nanotube/Polythiophene Composites

Multi‐walled carbon nanotube (MWCNT)/polythiophene (PTh) composites have been prepared by in situ chemical oxidative polymerization. PTh is synthesized onto the sidewalls of the MWCNTs, which play a role as hard templates for PTh to produce one‐dimensional nanostructures. The morphology and structures of the MWCNT/PTh composites are characterized by High‐resolution transmission electron microscopy, x‐ray diffraction, and Fourier transform infrared spectrometry. Their electrical property and thermal stability are determined using vector network analyzer and thermal gravimetric analyzer. Moreover, the mechanism of MWCNT/PTh nanowire formation is described. The studies show that the composites are nanowires with core‐shell structure, in which the outer shells and inner cores are formed by PTh and MWCNTs, respectively. The addition of MWCNTs does not change the backbone structure of PTh and affect the amorphous condition of PTh very slightly, however, it improves the electrical conductivity and thermal stability of PTh.     

A New Amperometric Hydrazine Sensor Based on Prussian Blue/Single‐walled Carbon Nanotube Nanocomposites

A slow reaction process has been successfully used to synthesize Prussian blue/single‐walled carbon nanotubes (PB/SWNTs) nanocomposites. Electrochemical and surface characterization by cyclic voltammetry (CV), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV‐vis absorption spectroscopy, Fourier transform infrared (FTIR) spectroscopy and X‐ray diffraction (XRD) confirmed the presence of PB nanocrystallites on SWNTs. PB/SWNTs modified glassy carbon electrode (GCE) exhibits efficient electron transfer ability and high electrochemical response towards hydrazine. The fabricated hydrazine sensor showed a wide linear range of 2.0×10^?6–6.0×10^?3 M with a response time less than 4 s and a detection limit of 0.5 μM. PB/SWNTs modified electrochemical sensors are promising candidates for cost‐effective in the hydrazine assays.     

Characterization and electrical properties of polypyrrole/multiwalled carbon nanotube composites synthesized by in situ chemical oxidative polymerization

This study describes the preparation of polypyrrole (PPy)/multiwalled carbon nanotube (MWNT) composites by in situ chemical oxidative polymerization. Various ratios of MWNTs, which served as hard templates, were first dispersed in aqueous solutions with the surfactant cetyltrimethylammonium bromide to form micelle/MWNT templates and overcome the difficulty of MWNTs dispersing into insoluble solutions of pyrrole monomer, and PPy was then synthesized via in situ chemical oxidative polymerization on the surface of the templates. Raman spectroscopy, Fourier transform infrared (FTIR), field‐emission scanning electron microscopy (FESEM), and high‐resolution transmission electron microscopy (HRTEM) were used to characterize the structure and morphology of the fabricated composites. Structural analysis using FESEM and HRTEM showed that the PPy/MWNT composites were core (MWNT)–shell (PPy) tubular structures. Raman and FTIR spectra of the composites were almost identical to those of PPy, supporting the idea that MWNTs served as the core in the formation of a coaxial nanostructure for the composites. The conductivities of these PPy/MWNT composites were about 150% higher than those of PPy without MWNTs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1413–1418, 2006     

In situ intercalative polymerization of conducting polypyrrole/montmorillonite nanocomposites

Conducting polypyrrole (PPy)‐montmorillonite (MMT) clay nanocomposites have been synthesized by the in situ intercalative polymerization method. The PPy‐MMT nanocomposites are characterized by field‐emission scanning electron microscopy (FE‐SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD), ultraviolet–visible (UV–vis) spectroscopy, thermogravimetric analysis (TGA), and Fourier‐transform infrared (FTIR) spectroscopy. XRD patterns show that after polymerization by the in situ intercalative method with ammonium persulfate and 1 M HCl, an increase in the basal spacing from 1.2 to 1.9 nm was observed, signifying that PPy is synthesized between the interlayer spaces of MMT. TEM and SEM micrographs suggest that the coexistence of intercalated MMT layers with the PPy macromolecules. FTIR reveals that there might be possible interfacial interactions present between the MMT clay and PPy matrix. The study also shows that the introduction of MMT clay results in thermal stability improvement of the PPy. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2279–2285, 2008     

Solubilizing single‐walled carbon nanotubes with pyrene‐functionalized block copolymers

The effect of pyrene distribution within pyrene‐functionalized random and block copolymers on noncovalent polymer/single‐walled carbon nanotube (SWNT) interactions was investigated. The block copolymers served as superior solubilizing agents in comparison with the random copolymers. Also, increasing the pyrene content within a polymer, while a constant molecular weight was maintained, improved SWNT solubility and therefore had to result in stronger polymer–nanotube interactions. However, increasing the length of the pyrene‐containing block diminished nanotube solubility, likely because of a lower number of polymer chains that were capable of binding to the nanotube surface. Atomic force microscopy and transmission electron microscopy indicated that the polymer–SWNT interactions were capable of partially debundling the nanotubes into individual solvated structures. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1941–1951, 2006     

Modification of multiwall carbon nanotubes via soap‐free emulsion polymerization of acrylonitrile

A novel method for the synthesis of polyacrylonitrile (PAN)‐coated multiwall carbon nanotubes (MWCNTs) via a simple soap‐free emulsion polymerization is presented for the first time. The polymerization was initiated with conventional anionic ammonium persulfate (APS) at 65 °C. The modification of PAN on MWCNT surfaces was confirmed by Fourier‐transform infrared (FT‐IR) spectroscopy, X‐ray photoelectron spectra (XPS), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), and Raman spectroscopy. It is found that all the surfaces of the MWCNTs were coated by PAN chains, and the PAN coating thickness could be controlled by simply adjusting the polymerization time. The obtained PAN‐coated MWCNTs could be well dispersed in water. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2057–2062, 2010     

“Click” generation of a conjugated polymer library for SWNT dispersion

Noncovalent functionalization of single‐walled carbon nanotubes (SWNTs) with conjugated polymers enhances SWNT processability and allows for selective dispersion of various SWNT species. Selective dispersions can be obtained by tuning the nature of the polymer, which can involve using various polymer backbones or side‐chains. However, a clear understanding of selectivity determinants is elusive, as the degree of polymerization (DP) has a large effect on SWNT selectivity. Additionally, preparing libraries of conjugated polymers with varying functionality while keeping DP consistent is difficult. Here, we report the utilization of a strained cyclooctyne‐containing conjugated polymer that serves as a versatile scaffold, enabling systematic preparation of a small library of conjugated polymers with different side‐chain functionality, while maintaining a consistent DP. The resulting polymers were used as dispersants for SWNTs, forming supramolecular polymer‐SWNT complexes that were characterized by UV‐Vis‐NIR absorption and Raman spectroscopy. In the series of polymers, we were able to probe the effect of small changes within the side chains, such as the incorporation of a carbonyl group or an aromatic unit, on the quality of the polymer‐SWNT dispersion. The results of these studies provide new insight into the factors that dictate the ability of a polymer to form strong interactions with SWNTs. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2053–2058     

Preparation and characterization of nematic polyazomethine/single‐walled carbon nanotube composites prepared by in situ polymerization

The synthesis and characterization of a series of nematic SWNT‐polyazomethine composites are described. The composites were prepared by in situ polymerization in the presence of 1 wt % of chemically modified SWNTs in such a way that they were either dispersed or covalently bonded to the polymeric matrix. The presence of the SWNTs did not alter the thermal behavior of the polymer matrix and, therefore, highly oriented fibers could be melt‐extruded from the composites at moderate temperatures, as revealed by structural and morphological studies. Preliminary tests on tensile properties indicate that strength and stiffness were improved when compared with fibers without CNTs, particularly when SWNTs were covalently bonded to the polymeric matrix. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2361–2372, 2009     

Poly(γ‐benzyl‐L‐glutamate)‐functionalized single‐walled carbon nanotubes from surface‐initiated ring‐opening polymerizations of N‐carboxylanhydride

Single‐walled carbon nanotubes (SWCNTs) have been functionalized with poly(γ‐benzyl‐L ‐glutamate) (PBLG) by ring‐opening polymerizations of γ‐benzyl‐L ‐glutamic acid‐based N‐carboxylanhydrides (NCA‐BLG) using amino‐functionalized SWCNTs (SWCNT‐NH₂) as initiators. The SWCNT functionalization has been verified by FTIR spectroscopy and transmission electron microscopy. The FTIR study reveals that surface‐attached PBLGs adopt random‐coil conformations in contrast to the physically absorbed or bulk PBLGs, which exhibit α‐helical conformations. Raman spectroscopic analysis reveals a significant alteration of the electronic structure of SWCNTs as a result of PBLG functionalization. The PBLG‐functionalized SWCNTs (SWCNT‐PBLG) exhibit enhanced solubility in DMF. Stable DMF solutions of SWCNT‐PBLG/PBLG with a maximum SWCNTs concentration of 259 mg L^?1 can be readily obtained. SWCNT‐PBLG/PBLG solid composites have been characterized by differential scanning calorimetry, thermogravimetric analysis, wide/small‐angle X‐ray scattering (W/SAXS), scanning electron microscopy, and polarized optical microscopy for their thermal or morphological properties. Microfibers containing SWCNT‐PBLG and PBLG can also be prepared via electrospinning. WAXS characterization reveals that SWCNTs are evenly distributed among PBLG rods in solution and in the solid state where PBLGs form a short‐range nematic phase interspersed with amorphous domains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2340–2350, 2010     

Poly(cyclohexene oxide)/clay nanocomposites by photoinitiated cationic polymerization via activated monomer mechanism

Poly(cyclohexene oxide) (PCHO)/clay nanocomposites were prepared by in situ photoinitiated activated monomer cationic polymerization. The polymerization of cyclohexene oxide through the interlayer galleries of the clay can provide distribution of the clay layers in the polymer matrix homogenously and results in the formation of PCHO/clay nanocomposites. The exfoliated structures were characterized by X‐ray diffraction spectroscopy, thermogravimetric analysis, transmission electron microscopy, and atomic force microscopy. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5328–5335, 2009