Oxygen ionic transport in Bi2O3-based oxides: II. The Bi2O3–ZrO2–Y2O3 and Bi2O3–Nb2O5–Ho2O3 solid solutions

Electrical conductivity, fluorite-type cubic unit cell volume and thermal expansion of the (Bi_{1− x} Nb _x )_{1− y} Ho _y O_1.5+δ (x=0.05 and 0.08; y=0.10−0.15) and (Bi_{1− x} Zr _x )_{1− y} Y _y O_1.5+δ (x=0.05 and 0.07; y=0.15) solid solutions have been found to decrease regularly with increasing dopant content. Annealing at temperatures below 900 K leads to a phase decomposition and to a sharp decrease in conductivity of the ceramics. Oxygen ion transference numbers have been determined by the e.m.f. method and by Faradaic efficiency measurement to exceed 0.9. A new technique of studying Faradaic efficiency has been proposed and verified using (Bi_0.95Zr_0.05)_0.85Y_0.15O_1.5+δ and Zr_0.90Y_0.10O_1.95 ceramic samples. Received: 31 October 1997 / Accepted: 18 December 1997     

Ga2O3-La2O3-Yb2O3-Er2O3(HO2O3)体系光谱性质的研究

根据稀土离子能级的特点,对Ga2O3-La2O3-Yb2O3-Er2O3(HO2O3)体系的光谱性质进行了探讨,发现它们有二类发光性质:Stokes发光和反Stokes发光,研究了发光强度和发射波长与掺杂离子的依赖关系,观察到由能量的共振转移引起的荧光浓度猝灭现象,并取得了最大发光强度时的掺杂离子浓度和一些规律性结果.     

Oxydationsprodukte intermetallischer Phasen. III. Tieftemperaturformen von K2Sn2O3 und Rb2Sn2O3 und eine Notiz über K2Ge2O3

Oxidation Products of Intermetallic Compounds. III. Low Temperature Forms of K₂Sn₂O₃ and Rb₂Sn₂O₃ and a Notice about K₂Ge₂O₃ By controlled oxidation of KSn (at 320°C) and RbSn (at 410°C) with O₂ the hitherto unknown low temperature forms of K₂Sn₂O₃ (a = 8.4100(8) Å) and Rb₂Sn₂O₃ (a = 8.6368(8) Å) are obtained, which are isotopic with cubic K₂Pb₂O₃. Oxidation at higher temperatures (at 510–5207°C) leads to the well-known HT-forms. The Madelung Part of Lattic Energie, MAPLE, is calculated for both compounds. K₂Pb₂O₃, Rb₂Pb₂O₃, Cs₂Pb₂O₃, and Cs₂Sn₂O₃ have been prepared too by oxidation of KPb, RbPb, CsPb, and CsSn. Oxidation of KGe (at 400°C) leads to the first oxogermanate(II), K₂Ge₂O₃ (cubic a = 8.339(1) Å, isotypic with K₂Pb₂O₃) together with K₆Ge₂O₇.     

Mischkristallbildung von As2O3 und Sb2O3

Zusammenfassung Durch Wegkochen von NH₃ aus ammoniakalischen Tartratlösungen des As₂O₃ und Sb₂O₃ in verschiedenem Verhältnis wurden einerseits monokline Mischkristalle der Oxyde mit einem Gehalt zwischen 100 und 70 Molprozent Arsen, andererseits kubische Mischkristalle mit 30 bis 100 Molprozent Antimon gewonnen. Die analytischen Ergebnisse werden durch Röntgen- und Infrarot-Untersuchungen bestätigt, aus den letzteren ergeben sich weitere Hinweise auf die Struktur.Mit 1 Abbildung1. Mitt.:E. Hayek, M. Hohenlohe-Profanter, B. Marcic undE. Beetz, Angew. Chem.70 307 (1958).     

化学气相传输法分离稀土混合氧化物Sm2O3-Eu2O3-Gd2O3

以ＡｌＣｌ３ 为络合物配体, 研究Ｓｍ２Ｏ３Ｅｕ２Ｏ３Ｇｄ２Ｏ３ 的分离特性。结果表明, 其传输能力为：Ｓｍ ≈Ｇｄ＞ Ｅｕ, 氯化物主要在９８０ ～１１００ Ｋ 沉积。不同温区的最大分离系数分别为： βＥｕ／Ｓｍ;１２００ Ｋ＝ １－７０ ,βＥｕ／Ｇｄ;１３００ Ｋ＝ １－８８ , βＳｍ／Ｇｄ;１３００ Ｋ ＝ １－２４ , β′Ｓｍ／Ｅｕ;８５０ ～８８０ Ｋ＝ ２－７６ , β′Ｇｄ／Ｅｕ;８８０～９００ Ｋ ＝ ２－８３ , β′Ｇｄ／Ｓｍ;８００ Ｋ＝１－１２ , 高于传统的湿法分离系数。     

Density and surface tension of the systems CaO-FeO-Fe2O3-MgO, CaO-FeO-Fe2O3-ZnO and CaO-Fe2O3-Cu2O

The density and surface tension of melts of the systems CaO-FeO-Fe₂O₃ MgO at the temperature 1623 K, CaO-FeO-Fe₂O₃-ZnO at 1573 K, and CaO-Fe₂O₃-Cu₂O at 1573 K were determined using the maximum bubble pressure method. The molar volume, the excess molar volume, and the excess surface tension were calculated on the basis of the obtained data. From these properties information on the interactions of components and possible chemical reactions between them was obtained. Due to the absence of silica and the low concentration of other network-forming oxides, only isolated FeO ₄ ⁵⁻ tetrahedra and the CaO·FeO ionic pairs are formed in these basic melts, the donor of the oxygen atoms being either CaO, FeO, or both CaO+FeO oxides. Even the observed ternary interactions may be attributed to the formation of the anions FeO ₄ ⁵⁻ only.     

Laser induced fluorescence studies of iodine oxide chemistry. Part II. The reactions of IO with CH3O2, CF3O2 and O3

The technique of pulsed laser photolysis was coupled to laser induced fluorescence detection of iodine oxide (IO) to measure rate coefficients, k for the reactions IO + CH(3)O(2)--> products (R1, 30-318 Torr N(2)), IO + CF(3)O(2)--> products (R2, 70-80 Torr N(2)), and IO + O(3)--> OIO + O(2) (R3a). Values of k(1) = (2 +/- 1) x 10(-12) cm(3) molecule(-1) s(-1), k(2) = (3.6 +/- 0.8) x 10(-11) cm(3) molecule(-1) s(-1), and k(3a) <5 x 10(-16) cm(3) molecule(-1) s(-1) were obtained at T = 298 K. In the course of this work, the product yield of IO from the reaction of CH(3)O(2) with I was determined to be close to zero, whereas CH(3)OOI was formed efficiently at 70 Torr N(2). Similarly, no evidence was found for IO formation in the CF(3)O(2) + I reaction. An estimate of the rate coefficients k(CH(3)O(2) + I) = 2 x 10(-11) cm(3) molecule(-1) s(-1) and k(CH(3)OOI + I) = 1.5 x 10(-10) cm(3) molecule(-1) s(-1) was also obtained. The results on k(1)-k(3) are compared to the limited number of previous investigations and the implications for the chemistry of the marine boundary layer are briefly discussed.     

Stability of O3 + N2, O3 + O2 and O3 + CO2 double hydrates: DFT study

1. Download : Download high-res image (151KB)
2. Download : Download full-size image

     

Thermal Characterization and Physico-Chemical Properties of Fe2O3−Mn2O3/Al2O3 Systems

The effect of ferric and manganese oxides dopants on thermal and physicochemical properties of Mn-oxide/Al₂O₃ and Fe₂O₃/Al₂O₃ systems has been studied separately. The pure and doped mixed solids were thermally treated at 400–1000°C. Pyrolysis of pure and doped mixed solids was investigated via thermal analysis (TG-DTG) techniques. The thermal products were characterized using XRD-analysis. The results revealed that pure ferric nitrate decomposes into Fe₂O₃ at 350°C and shows thermal stability up to1000°C. Crystalline Fe₃O₄ and Mn₃O₄phases were detected for some doped solids precalcined at 1000°C. Crystalline γ-Al₂O₃ phase was detected for all solids preheated up to 800°C. Ferric and manganese oxides enhanced the formation of α-Al₂O₃ phase at1000°C. Crystalline MnAl₂O₄ and MnFe₂O₄ phases were formed at 1000°C as a result of solid–solid interaction processes. The catalytic behavior of the thermal products was tested using the decomposition of H₂O₂ reaction. This revised version was published online in August 2006 with corrections to the Cover Date.     

Y2O3, La2O3, Sm2O3对氧化铝瓷烧结及力学性能的影响

研究了3种稀土氧化物对氧化铝陶瓷烧结性能和力学性能的影响.结果表明 含Y2O3,La2O3,Sm2O3的添加剂促进了氧化铝瓷的烧结,提高了氧化铝瓷的力学性能.Y2O3和Sm2O3掺量为0.50%,La2O3掺量为0.75%时氧化铝瓷在1600或1620 ℃保温2 h烧结,相对密度达98.9%以上,强度超过439 MPa,断裂韧性达5.15 MPa·m1/2以上.微观结构分析表明,Y2O3,La2O3,Sm2O3抑止氧化铝晶粒生长,细化晶粒,使晶粒尺寸较均匀形成致密化结构.     

Zum System K2O/PbO. Zur Kenntnis von K2Pb2O3

On the System K₂O/PbO: The Crystal Structure of K₂Pb₂O₃ Orange-coloured single crystals of K₂Pb₂O₃ crystallize by means of 4-circle-Diffractometer data (237 of 238 possible hkl, R = 5.9₉%, MoKα) cubic with a = 8.41₉ Å, Z = 4, in space group I2₁3?T⁵, parameter see text. We find a superstructure of the perovskite type of structure, where, concerning the formula KPbO_3/2, half of the O^2? ions are omitted systematically, without loosing the 3-Dimensional arrangement of order. Pb²⁺ is surrounded by 3 K⁺ by 6 O^2? and O^2? by 2 Pb²⁺ and 4 K⁺. The Madelung Part of the Lattice Energy, MAPLE, and Effective Coordination Numbers, ECoN, are calculated and discussed.     

Über Oxostannate(II). III. K2Sn2O3, Rb2Sn2O3 und Cs2Sn2O3 – ein Vergleich

On Oxostannates(II). III. K₂Sn₂0₃, Rb₂Sn₂0₃, and Cs₂Sn₂O₃ – a Comparison Hitherto unknown Rb₂Sn₂O₃ has been obtained by heating of mixtures of binary oxides [RbO_0.48 + SnO, Rb:Sn = 1.1:1, Al₂O₃?cylinders, Ar] as deep yellow powder or deep yellow single crystals. It is isotypic to K₂Sn₂O₃, R3 m-D with a = 6.086 Å, c = 15.101 Å, Z = 3, d_calc = 4.69, d_obs = 4.64 g X cm^?3. For 260 hkl it is R = 5.2₇% and R_w = 5.0₉% (MoKα, 4-circle diffractometer data). The structure of K₂Sn₂O₃ and Rb₂Sn₂O₃ is compared with that of Cs₂Sn₂O₃. For both types Effektive Coordination Numbers, ECoN, and the Madelung Part of Lattice Energy, MAPLE, have been calculated.