Chemical‐Bond‐Mediated p–n Heterojunction Photocatalyst Constructed from Coordination Polymer Nanoparticles and a Conducting Copolymer: Visible‐Light Active and Highly Efficient

A visible‐light‐active p–n heterojunction photocatalyst has been synthesized by the enwrapping of poly[aniline‐co‐N‐(4‐sulfophenyl)aniline] ( PAPSA ) on a coordination polymer nanoparticle ( NCP ). Compared with the visible‐light‐inactive NCP , the new p–n heterojunction photocatalyst, PAPSA/NCP , exhibits a much higher efficiency in the reduction of Cr^VI under visible light. PAPSA performs two functions in this p–n heterojunction photocatalyst. First, as a visible‐light‐active material, it extends the photoresponse region of the photocatalyst from the ultraviolet to the visible‐light region. Secondly, as a p‐type semiconductor possessing suitable energy levels with respect to NCP , PAPSA forms a p–n heterojunction with the n‐type NCP ; the inner electric field of the p–n heterojunction accelerates the separation of electrons and holes, which enhances the photocatalytic efficiency. Furthermore, the p–n heterojunction photocatalyst exhibits outstanding stability during the photocatalytic reduction of Cr^VI.     

Quantum‐Transport Characteristics of a p–n Junction on Single‐Layer TiS3

By using density functional theory and non‐equilibrium Green′s function‐based methods, we investigated the electronic and transport properties of a TiS₃ monolayer p–n junction. We constructed a lateral p–n junction on a TiS₃ monolayer using Li and F adatoms. An applied bias voltage caused significant variability in the electronic and transport properties of the TiS₃ p–n junction. In addition, the spin‐dependent current–voltage characteristics of the constructed TiS₃ p–n junction were analyzed. Important device characteristics were found, such as negative differential resistance and rectifying diode behaviors for spin‐polarized currents in the TiS₃ p–n junction. These prominent conduction properties of the TiS₃ p–n junction offer remarkable opportunities for the design of nanoelectronic devices based on a recently synthesized single‐layered material.     

Three‐Dimensional Bimetal‐Graphene‐Semiconductor Coaxial Nanowire Arrays to Harness Charge Flow for the Photochemical Reduction of Carbon Dioxide

The photochemical conversion of carbon dioxide provides a straightforward and effective strategy for the highly efficient production of solar fuels with high solar‐light utilization efficiency. However, the high recombination rate of photoexcited electron–hole (e‐h) pairs and the poor photostability have greatly limited their practical applications. Herein, a practical strategy is proposed to facilitate the separation of e‐h pairs and enhance the photostability in a semiconductor by the use of a Schottky junction in a bimetal‐graphene‐semiconductor stack array. Importantly, Au‐Cu nanoalloys (ca. 3 nm) supported on a 3D ultrathin graphene shell encapsulating a p‐type Cu₂O coaxial nanowire array promotes the stable photochemical reduction of CO₂ to methanol by the synergetic catalytic effect of interfacial modulation and charge‐transfer channel design. This work provides a promising lead for the development of practical catalysts for sustainable fuel synthesis.     

Synthesis and photovoltaic properties of thieno[3,4‐b]pyrazine or dithieno[3′,2′:3,4;2″,3″:5,6]benzo[1,2‐d]imidazole‐containing conjugated polymers

Novel conjugated polymers composed of benzo[1,2‐b:4,5‐b′]dithiophene and thieno[3,4‐b]pyrazine or dithieno[3′,2′:3,4;2″,3″:5,6]benzo[1,2‐d]imidazole units are synthesized by Stille polycondensation. The resulting polymers display a longer wavelength absorption and well‐defined redox activities. The effective intramolecular charge‐transfer and energy levels of all polymers are elucidated by computational calculations. Bulk‐heterojunction solar cells based on these polymers as p‐type semiconductors and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) as an n‐type semiconductor are fabricated, and their photovoltaic performances are for the first time evaluated. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1067–1075     

Solution‐Grown Organic Single‐Crystalline Donor–Acceptor Heterojunctions for Photovoltaics

Organic single crystals are ideal candidates for high‐performance photovoltaics due to their high charge mobility and long exciton diffusion length; however, they have not been largely considered for photovoltaics due to the practical difficulty in making a heterojunction between donor and acceptor single crystals. Here, we demonstrate that extended single‐crystalline heterojunctions with a consistent donor‐top and acceptor‐bottom structure throughout the substrate can be simply obtained from a mixed solution of C₆₀ (acceptor) and 3,6‐bis(5‐(4‐n‐butylphenyl)thiophene‐2‐yl)‐2,5‐bis(2‐ethylhexyl)pyrrolo[3,4‐c]pyrrole‐1,4‐dione (donor). 46 photovoltaic devices were studied with the power conversion efficiency of (0.255±0.095) % under 1 sun, which is significantly higher than the previously reported value for a vapor‐grown organic single‐crystalline donor–acceptor heterojunction (0.007 %). As such, this work opens a practical avenue for the study of organic photovoltaics based on single crystals.     

Surfactant‐Dependent Charge Transfer between Polyoxometalates and Single‐Walled Carbon Nanotubes: A Fluorescence Spectroscopic Study

Hybridizations of redox‐active polyoxometalates (POMs) with single‐walled carbon nanotubes (SWNTs) have been widely investigated for their diverse applications. For the purpose of constructing high‐quality electronic devices, controlling charge transfer within POM/SWNT hybrids is an inevitable issue. As determined by means of fluorescence spectroscopy, electron transfer between SWNTs and a common POM dopant, phosphomolybdic acid (PMo₁₂), can be tuned simply by an alteration of nanotube surfactant type from anionic to nonionic. The mechanism is attributed to the influence of surfactant type on the stabilization of the electron donor–acceptor hybrid and effect of surfactant–nanotube interactions. These results will be important to control charge‐transport behavior in nanohybrids consisting of carbon nanotubes.     

Effects of FeCl3 as oxidizing agent on the conduction mechanisms in polypyrrole (PPy)/pc–ZnO hybrid heterojunctions grown by oxidative chemical vapor deposition

P‐type polypyrrole (PPy) films are deposited on glass and on n‐type polycrystalline ZnO (pc–ZnO) substrates by oxidative chemical vapor deposition under three different amounts of FeCl₃ used as oxidizing agents to form hybrid heterojunctions. Their microstructure, morphology, and electrical characteristics are studied. Particularly, current–voltage characteristics of the PPy/pc–ZnO heterojunctions are analyzed by defining an electrical equivalent circuit. The extracted parameters, together with the estimated heterojunction barrier height and the HOMO energy level of the PPy, indicate that a thermionic emission of holes at the heterojunction determines the saturation current of the diode at low voltage. For larger FeCl₃ amounts, the diode ideality factor increases indicating an increment of recombination by tunneling of charge carriers occurring at the heterojunction. This is attributed to a narrowing of the space charge region due to an increment of the number of charge carriers with a growing amount of FeCl₃. At high voltages, the PPy thickness influences the ohmic and space–charge limited current mechanisms at the bulk region. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1537–1544     

Proton‐Coupled Self‐Assembly of a Porphyrin‐Naphthalenediimide Dyad

The construction of an n–p heterojunction through the self‐assembly of a dyad based on tetraphenylporphyrin (TPP) and 1,4,5,8‐naphthalenedimide (NDI) ( 1 ) is described. Proton transfer from the lysine head group of 1 to the porphyrin ring occurs concomitantly with self‐assembly into 1D nanorods in CHCl₃. TEM and AFM studies showed that the nanorods are formed by the lateral and vertical fusion of multilameller vesicles into networks and hollow ribbons, respectively. These intermediate structures transitioned to nanorods over the course of 4–6 days. Time‐resolved spectroscopy revealed that photoinduced charge separation occurs with rate constants that depend on the nature of the aggregation.     

Solar‐Powered Organic Semiconductor–Bacteria Biohybrids for CO2 Reduction into Acetic Acid

An organic semiconductor–bacteria biohybrid photosynthetic system is used to efficiently realize CO₂ reduction to produce acetic acid with the non‐photosynthetic bacteria Moorella thermoacetica. Perylene diimide derivative (PDI) and poly(fluorene‐co‐phenylene) (PFP) were coated on the bacteria surface as photosensitizers to form a p‐n heterojunction (PFP/PDI) layer, affording higher hole/electron separation efficiency. The π‐conjugated semiconductors possess excellent light‐harvesting ability and biocompatibility, and the cationic side chains of organic semiconductors could intercalate into cell membranes, ensuring efficient electron transfer to bacteria. Moorella thermoacetica can thus harvest photoexcited electrons from the PFP/PDI heterojunction, driving the Wood–Ljungdahl pathway to synthesize acetic acid from CO₂ under illumination. The efficiency of this organic biohybrid is about 1.6 %, which is comparable to those of reported inorganic biohybrid systems.     

Integration of Plasmonic Effects and Schottky Junctions into Metal–Organic Framework Composites: Steering Charge Flow for Enhanced Visible‐Light Photocatalysis

A wide range of light absorption and rapid electron–hole separation are desired for efficient photocatalysis. Herein, on the basis of a semiconductor‐like metal–organic framework (MOF), a Pt@MOF/Au catalyst with two types of metal–MOF interfaces integrates the surface plasmon resonance excitation of Au nanorods with a Pt‐MOF Schottky junction, which not only extends the light absorption of the MOF from the UV to the visible region but also greatly accelerates charge transfer. The spatial separation of Pt and Au particles by the MOF further steers the formation of charge flow and expedites the charge migration. As a result, the Pt@MOF/Au presents an exceptionally high photocatalytic H₂ production rate by water splitting under visible light irradiation, far superior to Pt/MOF/Au, MOF/Au and other counterparts with similar Pt or Au contents, highlighting the important role of each component and the Pt location in the catalyst.     

Controlling Interfacial Charge Transfer and Fill Factors in CuO‐based Tandem Dye‐Sensitized Solar Cells

We designed and synthesized a series of novel electron‐accepting zinc(II)phthalocyanines (ZnPc) and probed them in p‐type dye sensitized solar cells (p‐DSSCs) by using CuO as photocathodes. By realizing the right balance between interfacial charge separation and charge recombination, optimized fill factors (FFs) of 0.43 were obtained. With a control over fill factors in p‐DSSCs in hand we turned our attemtion to t‐DSSCs, in which we combined for the first time CuO‐based p‐DSSCs with TiO₂‐based n‐DSSCs using ZnPc and N719. In the resulting t‐DSSCs, the V_OC of 0.86 V is the sum of those found in p‐ and n‐DSSCs, while the FF remains around 0.63. It is only the smaller J_scs in t‐DSSCs that limits the efficiency to 0.69 %.     

An Efficient p–n Heterojunction Photocatalyst Constructed from a Coordination Polymer Nanoplate and a Partically Reduced Graphene Oxide for Visible‐Light Hydrogen Production

A new p–n heterojunction photocatalyst has been synthesized successfully through chemical‐bond‐mediated combination of coordination polymer nanoplates (CPNPs) and partially reduced graphene oxide (PRGO) with a simple colloidal blending process. Photocatalytic H₂ production by the p–n heterojunction photocatalyst PRGO / CPNP was investigated under visible‐light irradiation, which illustrates that PRGO / CPNP exhibits a much higher photocatalytic H₂ production rate than neat the CPNPs. The improvement of this photocatalytic property can be attributed to the inner electrical field formed in the p–n heterojunction, which impedes recombination of photogenerated electrons and holes. In PRGO / CPNP, the existence of the p–n heterojunction has been confirmed by electrochemical methods clearly. For PRGO / CPNP, the reductive degree of the PRGO has a great influence on the H₂ production rate and an ideal condition to get a PRGO / CPNP photocatalyst with higher performance has been obtained.     

Aqueous‐Solution Route to Zinc Telluride Films for Application to CO2 Reduction

As a photocathode for CO₂ reduction, zinc‐blende zinc telluride (ZnTe) was directly formed on a Zn/ZnO nanowire substrate by a simple dissolution–recrystallization mechanism without any surfactant. With the most negative conduction‐band edge among p‐type semiconductors, this new photocatalyst showed efficient and stable CO formation in photoelectrochemical CO₂ reduction at ?0.2–?0.7 V versus RHE without a sacrificial reagent.     

The Influence of Charge Transport and Recombination on the Performance of Dye‐Sensitized Solar Cells

Electrochemical impedance spectroscopy (EIS) and transient voltage decay measurements are applied to compare the performance of dye sensitized solar cells (DSCs) using organic electrolytes, ionic liquids and organic‐hole conductors as hole transport materials (HTM). Nano‐crystalline titania films sensitized by the same heteroleptic ruthenium complex NaRu(4‐carboxylic acid‐4′‐carboxylate) (4,4′‐dinonyl‐2,2′‐bipyridyl)(NCS)₂ , coded Z‐907Na are employed as working electrodes. The influence of the nature of the HTM on the photovoltaic figures of merit, that is, the open circuit voltage, short circuit photocurrent and fill factor is evaluated. In order to derive the electron lifetime, as well as the electron diffusion coefficient and charge collection efficiency, EIS measurements are performed in the dark and under illumination corresponding to realistic photovoltaic operating conditions of these mesoscopic solar cells. A theoretical model is established to interpret the frequency response off the impedance under open circuit conditions, which is conceptually similar to photovoltage transient decay measurements. Important information on factors that govern the dynamics of electron transport within the nanocrystalline TiO₂ film and charge recombination across the dye sensitized heterojunction is obtained.     

Thieno[3,2‐b]thiophene‐substituted benzodithiophene in donor–acceptor type semiconducting copolymers: A feasible approach to improve performances of organic photovoltaic cells

Thieno[3,2‐b]thiophene‐substituted benzo[1,2‐b:4,5‐b′]dithiophene donor units (TTBDT) serve as novel promising building blocks for donor–acceptor (D‐A) copolymers in organic photovoltaic cells. In this study, a new D‐A type copolymer (PTTBDT‐TPD) consisting of TTBDT and thieno[3,4‐c]pyrrole‐4,6‐dione (TPD) is synthesized by Stille coupling polymerization. A PTTBDT‐TPD analog consisting of TTBDT and alkylthienyl‐substituted BDT (PTBDT‐TPD) is also synthesized to compare the optical, electrochemical, morphological, and photovoltaic properties of the polymers. Bulk heterojunction photovoltaic devices are fabricated using the polymers as p‐type donors and [6,6]‐phenyl C₇₁‐butyric acid methyl ester (PC₇₁BM) as the n‐type acceptor. The power conversion efficiencies of the devices fabricated using PTTBDT‐TPD and PTBDT‐TPD are 6.03 and 5.44%, respectively. The difference in efficiency is attributed to the broad UV–visible absorption and high crystallinity of PTTBDT‐TPD. The replacement of the alkylthienyl moiety with thieno[3,2‐b]thiophene on BDT can yield broad UV–visible absorption due to extended π‐conjugation, and enhanced molecular ordering and orientation for organic photovoltaic cells. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3608–3616     

Utilizing the Space‐Charge Region of the FeNi‐LDH/CoP p‐n Junction to Promote Performance in Oxygen Evolution Electrocatalysis

The modulation of electron density is an effective option for efficient alternative electrocatalysts. Here, p‐n junctions are constructed in 3D free‐standing FeNi‐LDH/CoP/carbon cloth (CC) electrode (LDH=layered double hydroxide). The positively charged FeNi‐LDH in the space‐charge region can significantly boost oxygen evolution reaction. Therefore, the j at 1.485 V (vs. RHE) of FeNi‐LDH/CoP/CC achieves ca. 10‐fold and ca. 100‐fold increases compared to those of FeNi‐LDH/CC and CoP/CC, respectively. Density functional theory calculation reveals OH^? has a stronger trend to adsorb on the surface of FeNi‐LDH side in the p‐n junction compared to individual FeNi‐LDH further verifying the synergistic effect in the p‐n junction. Additionally, it represents excellent activity toward water splitting. The utilization of heterojunctions would open up an entirely new possibility to purposefully regulate the electronic structure of active sites and promote their catalytic activities.     

Visible‐Light‐Promoted Dearomative Fluoroalkylation of β‐Naphthols through Intermolecular Charge Transfer

The first visible‐light‐promoted dearomative fluoroalkylation of β‐naphthols was realized without the assistance of any transition‐metal catalysts or external photosensitizers. Inexpensive fluoroalkyl iodides were directly used as efficient fluoroalkylation reagents under very mild reaction conditions. The scope of this process was found to be general and broad, and both trifluoromethyl and perfluoroalkyl groups (‐C₄F₉, ‐C₆F₁₃, and ‐C₈F₁₇) were installed in excellent yields. Preliminary mechanistic studies suggest that visible‐light‐promoted intermolecular charge transfer within the naphtholate–fluoroalkyl iodide electron donor–acceptor (EDA) complex induces a single electron transfer in the absence of photocatalysts.     

Designing p‐Type Semiconductor–Metal Hybrid Structures for Improved Photocatalysis

A practical strategy is proposed to facilitate the migration of holes in semiconductor (the low rate of which limits photocatalytic efficiency) by taking advantage of the Schottky barrier between p‐type semiconductor and metal. A high work function is found to serve as an important selection rule for building such desirable Schottky junction between semiconductor surface facets and metal. The intrinsic charge spatial distribution has to be taken into account when selecting the facets, as it results in accumulation of photoexcited electrons and holes on certain semiconductor facets. Importantly, the facets have a high work function, the same characteristic required for the formation of Schottky junction in a p‐type semiconductor–metal hybrid structure. As a result, the semiconductor crystals in the hybrid design may be better enclosed by single facets with high work function, so as to synergize the two effects: Schottky barrier versus charge spatial separation.     

Optoelectronic Properties of Dicyanofluorene‐Based n‐Type Polymers

Three new donor–acceptor‐type copolymers ( P1 , P2 , P3 ) consisting of dicyanofluorene as acceptor and various donor moieties were designed and synthesized. Optoelectronic properties were studied in detail by means of UV‐visible absorption and fluorescence spectroscopy, cyclic voltammetry, space‐charge‐limited current (SCLC), flash‐photolysis time‐resolved microwave conductivity (FP‐TRMC), and density functional theory (DFT). All polymers showed strong absorption in the UV‐visible region and the absorption maximum undergoes redshift with an increasing number of thiophene units in the polymer backbone. SCLC analysis showed that the electron mobilities of the polymers in the bulk state were 1 to 2 orders higher than that of the corresponding hole mobilities, which indicated the n‐type nature of the materials. By using FP‐TRMC, the intrapolymer charge‐carrier mobility was assessed and compared with the interpolymer mobility obtained by SCLC. The polymers exhibited good electron‐accepting properties sufficiently high enough to oxidize the excited states of regioregular poly(3‐hexylthiophene) (P3HT (donor)), as evident from the FP‐TRMC analysis. The P3 polymer exhibited the highest FP‐TRMC transients in the pristine form as well as when blended with P3HT. Use of these polymers as n‐type materials in all‐polymer organic solar cells was also explored in combination with P3HT. In accordance with the TRMC results, P3 exhibited superior electron‐transport and photovoltaic properties to the other two polymers, which is explained by the distribution of the energy levels of the polymers by using DFT calculations.     

Highly Segregated Lamello‐Columnar Mesophase Organizations and Fast Charge Carrier Mobility in New Discotic Donor–Acceptor Triads

Four new donor–acceptor triads (D–A–D) based on discotic and arylene mesogens have been synthesized by using Sonogashira coupling and cyclization reactions. This family of triads consists of two side‐on pending triphenylene mesogens, acting as the electron‐donating groups (D), laterally connected through short lipophilic spacers to a central perylenediimide (PI), benzo[ghi]perylenediimide (BI), or coronenediimide (CI) molecular unit, respectively, playing the role of the electron acceptor (A). All D–A–D triads self‐organize to form a lamello‐columnar oblique mesophase, with a highly segregated donor–acceptor (D–A) heterojunction organization, consequent to efficient molecular self‐sorting. The structure consists in the regular alternation of two disrupted rows of triphenylene columns and a continuous row of diimine species. High‐resolution STM images demonstrate that PI‐TP2 forms stable 2D self‐assembly nanostructures with some various degrees of regularity, whereas the other triads do not self‐organize into ordered architectures. The electron‐transport mobility of CI‐TP2, measured by time‐of‐flight at 200 °C in the mesophase, is one order of magnitude higher than the hole mobility. By means of this specific molecular designing idea, we realized and demonstrated for the first time the so‐called p–n heterojunction at the molecular level in which the electron‐rich triphenylene columns act as the hole transient pathways, and the coronenediimide stacks form the electron‐transport channels.