One‐pot synthesis of surface‐functionalized molecularly imprinted polymer microspheres by iniferter‐induced “living” radical precipitation polymerization

This article describes for the first time the development of a new polymerization technique by introducing iniferter‐induced “living” radical polymerization mechanism into precipitation polymerization and its application in the molecular imprinting field. The resulting iniferter‐induced “living” radical precipitation polymerization (ILRPP) has proven to be an effective approach for generating not only narrow disperse poly(ethylene glycol dimethacrylate) microspheres but also molecularly imprinted polymer (MIP) microspheres with obvious molecular imprinting effects towards the template (a herbicide 2,4‐dichlorophenoxyacetic acid (2,4‐D)), rather fast template rebinding kinetics, and appreciable selectivity over structurally related compounds. The binding association constant K_a and apparent maximum number N_max for the high‐affinity sites of the 2,4‐D imprinted polymer were determined by Scatchard analysis and found to be 1.18 × 10⁴ M^?1 and 4.37 μmol/g, respectively. In addition, the general applicability of ILRPP in molecular imprinting was also confirmed by the successful preparation of MIP microspheres with another template (2‐chloromandelic acid). In particular, the living nature of ILRPP makes it highly useful for the facile one‐pot synthesis of functional polymer/MIP microspheres with surface‐bound iniferter groups, which allows their direct controlled surface modification via surface‐initiated iniferter polymerization and is thus of great potential in preparing advanced polymer/MIP materials. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3217–3228, 2010     

Tetraphenylethane iniferters. II. Toluene diisocyanate-based polyurethane iniferter for “living” radical polymerization of acrylonitrile

A novel polyurethane iniferter, synthesized from equal moles of toluene diisocyanate and 1,1,2,2-tetraphenyl-1,2-ethanediol, was used to polymerize acrylonitrile to assess whether it proceeded via a “living” radical polymerization mechanism. From the kinetic results, the rate of polymerization could be expressed as R_pα[BPT]^0.96[AN]^1.64. The increase of number-average molecular weight with increase of both conversion and polymerization time, the bimodal molecular weight distribution in gel permeation chromatography and the increase of molecular weight in the post-polymerization of polyacrylonitrile confirm that the present tetraphenylethane-based polyurethane iniferter follows a “living” radical polymerization mechanism. © 1996 John Wiley & Sons, Inc.     

“Living” radical polymerization of methyl methacrylate with diethyl 2,3-dicyano-2,3-diphenylsuccinate as a thermal iniferter

The bulk polymerization of methyl methacrylate (MMA) initiated with diethyl 2,3-dicyano-2,3-diphenylsuccinate (DCDPS) was studied. This polymerization showed some “living” characteristics; that is, both the yield and the molecular weight of the resulting polymers increased with reaction time, and the resultant polymer can be extended by adding MMA. The molecular weight distribution of PMMA obtained at high conversion is fairly narrow (M_w/M_n = 1.24≈1.34). It was confirmed that DCDPS can serve as a thermal iniferter for MMA polymerization by a “living” radical mechanism. Furthermore, the PMMA obtained can act as a macroinitiator for radical polymerization of styrene (St) to give a block copolymer. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4610–4615, 1999     

Controlled free radical ring-opening polymerization and chain extension of the “living” polymer

Free radical ring-opening polymerization of 2-methylene-1,3-dioxepane (MDP) in the presence of 2,2,6,6-tetramethyl-1-piperidinyloxy free radical (TEMPO) has been achieved to afford a chain polyester (PMDP) with di-t-butyl peroxide (DTBP) as an initiator at 125°C. The polydispersity of the polymers decreases as the concentration of TEMPO is increased. At high TEMPO concentrations, the polydispersity as low as 1.2 was obtained, which is below the theoretical lower limit for a conventional free radical polymerization. A linear relationship between the number-average molecular weight (M_n) and the monomer conversion was observed with the best-fit line passing very close to the origin of the M_n-conversion plot. The isolated and purified TEMPO-capped PMDP polymers have been employed to prepare chain extended polymers upon addition of more MDP monomer. These results are suggestive of the “living” polymerization process. A possible polymerization mechanism might involve thermal homolysis of the TEMPO-PMDP bonds followed by the addition of the monomers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 761–771, 1998     

Facile “Living” Radical Polymerization of Methyl Methacrylate in the Presence of Iniferter Agents: Homogeneous and Highly Efficient Catalysis from Copper(II) Acetate

A facile homogeneous polymerization system involving the iniferter agent 1‐cyano‐1‐methylethyl diethyldithiocarbamate (MANDC) and copper(II) acetate (Cu(OAc)₂) is successfully developed in bulk using methyl methacylate (MMA) as a model monomer. The detailed polymerization kinetics with different molar ratios (e.g., [MMA]₀/[MANDC]₀/[Cu(OAc)₂]₀ = 500/1/x (x = 0.1, 0.2, 0.5, 1.0)) demonstrate that this system has the typical “living”/controlled features of “living” radical polymerization, even with ppm level catalyst Cu(OAc)₂, first order polymerization kinetics, a linear increase in molecular weight with monomer conversion and narrow molecular weight distributions for the resultant PMMA. ¹H NMR spectra and chain‐extension experiments further confirm the “living” characteristics of this process. A plausible mechanism is discussed.

     

Block copolymers by transformation of “living” carbocationic into “living” radical polymerization. II. ABA-type block copolymers comprising rubbery polyisobutene middle segment

A general method for the transformation of “living” carbocationic into “living” radical polymerization, without any modification of chain ends, is reported for the preparation of ABA block copolymers. For example, α,ω-difunctional polyisobutene, capped with several units of styrene, Cl-St-PIB-St-Cl, prepared cationically (M_n = 7800, M_w/M_n = 1.31) was used as an efficient difunctional macroinitiator for homogeneous “living” atom transfer radical polymerization to prepare triblock copolymers with styrene, PSt-PIB-PSt (M_n = 28,800, M_w/M_n = 1.14), methyl acrylate, PMA-PIB-PMA (M_n = 31,810, M_w/M_n = 1.42), isobornyl acrylate, PIBA-PIB-PIBA (M_n = 33,500, M_w/M_n = 1.21), and methyl methacrylate, PMMA-PIB-PMMA (M_n = 33,500, M_w/M_n = 1.47). © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3595–3601, 1997     

Preparation of molecularly imprinted polymers via atom transfer radical “bulk” polymerization

The first application of atom transfer radical “bulk” polymerization (ATRBP) in molecular imprinting is described, which provides molecularly imprinted polymers (MIPs) with obvious imprinting effects towards the template, very fast binding kinetics, and an appreciable selectivity over structurally related compounds. In comparison with the MIP prepared via the normally used traditional “bulk” free radical polymerization (BFRP), the MIPs obtained via ATRBP showed somewhat lower binding capacities and apparent maximum numbers N_max for high‐affinity sites as well as quite similar binding association constants K_a for high‐affinity sites and high‐affinity site densities, in contrast with the previous reports (e.g., nitroxide/iniferter‐mediated “bulk” polymerization provided MIPs with improved properties). This is tentatively ascribed to the occurrence of rather fast gelation process in ATRBP, which greatly restricted the mobility of the chemical species, leading to a heavily interrupted equilibrium between dormant species and active radicals and heterogeneous polymer networks. In addition, the general applicability of ATRBP was also confirmed by preparing MIPs for different templates. This work clearly demonstrates that applying controlled radical polymerizations (CRPs) in molecular imprinting not always benefits the binding properties of the resultant MIPs, which is of significant importance for the rational use of CRPs in generating MIPs with improved properties. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 532–541, 2010     

Synthesis and characterization of star graft copolymers with asymmetric mixed “V‐shaped” side chains via “click” chemistry on a hyperbranched polyglycerol core

The star graft copolymers composed of hyperbranched polyglycerol (HPG) as core and well defined asymmetric mixed “V‐shaped” identical polystyrene (PS) and poly(tert‐butyl acrylate) as side chains were synthesized via the “click” chemistry. The V‐shaped side chain bearing a “clickable” alkyne group at the conjunction point of two blocks was first prepared through the combination of anionic polymerization of styrene (St) and atom transfer radical polymerization of tert‐butyl acrylate (tBA) monomer, and then “click” chemistry was conducted between the alkyne groups on the side chains and azide groups on HPG core. The obtained star graft copolymers and intermediates were characterized by gel permeation chromatography (GPC), GPC equipped with a multiangle laser‐light scattering detector (GPC‐MALLS), nuclear magnetic resonance spectroscopy and fourier transform infrared. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1308–1316, 2009     

Synthesis and characterization of polyurethane–polyvinylbenzyl chloride multiblock copolymers and their cationomers using a polyurethane macroiniferter

Polyurethane iniferter prepared from isocyanate end capped prepolymer and 1,1,2,2-tetraphenyl-1,2-ethanediol, has been used to polymerize vinylbenzyl chloride to obtain polyurethane-polyvinylbenzyl chloride multiblock copolymers. Formation of the block copolymers proceeds with increase in both molecular weight and conversion with increasing polymerization time showing that the polymerization proceeds via a “living” radical mechanism. The block copolymers so obtained were converted into their cationomers by the treatment of triethylamine. The block copolymers and their cationomers have been characterized by FTIR, FTNMR, TGA, and DSC studies. The effect of thermal energy on the molecular weight of the macroiniferter in the absence of monomer has been studied in order to understand the mechanism of formation of the block copolymers. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1237–1244, 1997     

Cyclic alkoxyamine‐initiator tethered by azide/alkyne‐“click”‐chemistry enabling ring‐expansion vinyl polymerization providing macrocyclic polymers

A cyclic initiator for the nitroxide‐mediated controlled radical polymerization (NMP) is a powerful tool for the preparation of macrocyclic polymers via a ring‐expansion vinyl polymerization mechanism. For this purpose, we prepared a Hawker‐type NMP‐initiator that includes an azide and a terminal alkyne as an acyclic precursor, which is subsequently tethered via an intramolecular azide/alkyne‐“click”‐reaction, producing the final cyclic NMP‐initiator. The polymerization reactions of styrene with cyclic initiator were demonstrated and the resultant polymers were characterized by the gel permeation chromatography (GPC) and the matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS). These results prove that the ring‐expansion polymerization of styrene occurred together with the radical ring‐crossover reactions originating from the exchange of the inherent nitroxides generating macrocyclic polystyrenes with higher expanded rings. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3402–3416, 2010     

Synthesis,characterization, and micellization of PCL‐g‐PEG copolymers by combination of ROP and “Click” chemistry via “Graft onto” method

Biodegradable and biocompatible PCL‐g‐PEG amphiphilic graft copolymers were prepared by combination of ROP and “click” chemistry via “graft onto” method under mild conditions. First, chloro‐functionalized poly(ε‐caprolactone) (PCL‐Cl) was synthesized by the ring‐opening copolymerization of ε‐caprolactone (CL) and α‐chloro‐ε‐caprolactone (CCL) employing scandium triflate as high‐efficient catalyst with near 100% monomer conversion. Second, the chloro groups of PCL‐Cl were quantitatively converted into azide form by NaN₃. Finally, copper(I)‐catalyzed cycloaddition reaction was carried out between azide‐functionalized PCL (PCL‐N₃) and alkyne‐terminated poly(ethylene glycol) (A‐PEG) to give PCL‐g‐PEG amphiphilic graft copolymers. The composition and the graft architecture of the copolymers were characterized by ¹H NMR, FTIR, and GPC analyses. These amphiphilic graft copolymers could self‐assemble into sphere‐like aggregates in aqueous solution with diverse diameters, which decreased with the increasing of grafting density. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Facile synthesis of polyester dendrimer via combining thio‐bromo “Click” chemistry and ATNRC

This article reports on developing an efficient synthesis approach to aliphatic polyester dendrimer, poly(thioglycerol‐2‐propionate) (PTP), by combination of thio‐bromo “Click” chemistry with atom transfer nitroxide radical coupling (ATNRC). Through the one‐pot two‐step method, linear polystyrene with hydroxyl end groups (l‐PS‐2OH) was obtained by first atom transfer radical polymerization of styrene and following termination using 4‐(2,3‐dihydroxypropoxy)‐TEMPO (DHP‐TEMPO) to capture the PS macroradicals via ATNRC method. Using l‐PS‐2OH as support, the dendritic repeating units divergently were grown from the hydroxyl end groups via esterification and thio‐bromo “Click” reaction two‐step process. In every generation, the resulting intermediates l‐PS‐d‐PTP (G1‐G4) can be easily isolated from the excessive unreacted monomers by simple precipitation in ethanol without help of time, labor and solvent consuming column chromatographic purification. At last, cleavage of the alkoxyamine group between the PS support and dendrimer at elevated temperature (125 °C) provided the targeted polyester dendrimer PTP up to the fourth generation. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1762–1768     

Synthesis of graft copolymers with “V‐shaped” and “Y‐shaped” side chains via controlled radical and anionic polymerizations

A combination of nitroxide‐mediated radical polymerization and living anionic polymerization was used to synthesize a series of well‐defined graft (co)polymers with “V‐shaped” and “Y‐shaped” branches. The polymer main chain is a copolymer of styrene and p‐chloromethylstyrene (PS‐co‐PCMS) prepared via nitroxide‐mediated radical polymerization. The V‐shaped branches were prepared through coupling reaction of polystyrene macromonomer, carrying 1,1‐diphenylethylene terminus, with polystyryllithium or polyisoprenyllithium. The Y‐shaped branches were prepared throughfurther polymerization initiated by the V‐shaped anions. The obtained branches, carrying a living anion at the middle (V‐shaped) or at the end of the third segment (Y‐shaped), were coupled in situ with pendent benzyl chloride of PS‐co‐PCMS to form the target graft (co)polymers. The purified graft (co)polymers were analyzed by size exclusion chromatography equipped with a multiangle light scattering detector and a viscometer. The result shows that the viscosities and radii of gyration of the branched polymers are remarkably smaller than those of linear polystyrene. In addition, V‐shaped product adopts a more compact conformation in dilute solution than the Y‐shaped analogy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4013–4025, 2007     

Universal xanthate‐mediated controlled free radical polymerizations of the “less activated” vinyl monomers

The living free radical polymerizations of three “less activated” monomers (LAMs), vinyl acetate, N‐vinylcarbazole, and N‐vinylpyrrolidone, were successfully achieved in the presence of a disulfide, isopropylxanthic disulfide (DIP), using 2,2′‐azoisobutyronitrile (AIBN) as the initiator. The living behaviors of polymerizations of LAMs are evidenced by first‐order kinetic plots and linear increase of molecular weights (M_ns) of the polymers with monomer conversions, while keeping the relatively low molecular weight distributions, respectively. The effects of reaction temperatures and molar ratios of components on the polymerization were also investigated in detail. The polymerization proceeded with macromolecular design via interchange of xanthate process, where xanthate formed in situ from reaction of AIBN and DIP. The architectures of the polymers obtained were characterized by GPC, ¹H NMR, UV–vis, and MALDI‐TOF‐MS spectra, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and phase behavior of a polynorbornene‐based molecular brush with dual “jacketing” effects

In this study, a series of well‐defined liquid crystalline molecular brushes with dual “jacketing” effects, polynorbornene‐g‐poly{2,5‐bis[(4‐methoxyhenyl)oxycarbonyl] styrene} (PNb‐g‐PMPCS), were synthesized by the “grafting through” method from ring opening metathesis polymerization of α‐norbornenyl‐terminated PMPCS. The rigid PMPCS side chain was synthesized by Cu(I)‐catalyzed atom transfer radical polymerization initiated by N‐[(2‐bromo‐2‐methylpropanoyl)ethyl]‐cis‐5‐norbornene‐exo‐2,3‐dicarboximide. The chemical structures of the molecular brushes were confirmed by ¹H NMR and gel permeation chromatography (GPC), and the thermal properties were studied by thermogravimetric analysis (TGA). GPC results reveal that the molecular brushes have relatively narrow polydispersities. TGA results show that the molecular brushes have excellent thermal stabilities. The PMPCS side chains in all the molecular brushes form the columnar nematic liquid crystalline phase, which is a little different from the behavior of linear PMPCS possibly due to the confinement or other effects of the brush architecture which leads to decreased order. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2116–2123     

Heterograft copolymers of poly(ε‐caprolactone) prepared by combination of ATRA “grafting onto” and ATRP “grafting from” processes

This paper aims at reporting on the synthesis of a heterograft copolymer by combining the “grafting onto” process based on atom transfer radical addition (ATRA) and the “grafting from” process by atom transfer radical polymerization (ATRP). The statistical copolymerization of ε‐caprolactone (εCL) and α‐chloro‐ε‐caprolactone (αClεCL) was initiated by 2,2‐dibutyl‐2‐stanna‐1,3‐dioxepane (DSDOP), followed by ATRA of parts of the chlorinated units of poly(αClεCL‐co‐εCL) on the terminal double bond of α‐MeO,ω‐CH₂?CH? CH₂? CO₂‐poly(ethylene oxide) (PEO). The amphiphilic poly(εCL‐g‐EO) graft copolymer collected at this stage forms micelles as supported by dynamic light scattering (DLS) and transmission electron microscopy (TEM). The unreacted pendant chloro groups of poly(εCL‐g‐EO) were used to initiate the ATRP of styrene with formation of copolymer with two populations of randomly distributed grafts, that is PEO and polystyrene. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6015–6024, 2006     

Synthesis of H‐shaped complex macromolecular structures by combination of atom transfer radical polymerization,photoinduced radical coupling,ring‐opening polymerization,and iniferter processes

Three controlled/living polymerization processes, namely atom transfer radical polymerization (ATRP), ring‐opening polymerization (ROP) and iniferter polymerization, and photoinduced radical coupling reaction were combined for the preparation of ABCBD‐type H‐shaped complex copolymer. First, α‐benzophenone functional polystyrene (BP‐PS) and poly(methyl methacrylate) (BP‐PMMA) were prepared independently by ATRP. The resulting polymers were irradiated to form ketyl radicals by hydrogen abstraction of the excited benzophenone moieties present at each chain end. Coupling of these radicals resulted in the formation of polystyrene‐b‐poly(methyl methacrylate) (PS‐b‐PMMA) with benzpinacole structure at the junction point possessing both hydroxyl and iniferter functionalities. ROP of ε‐caprolactone (CL) by using PS‐b‐PMMA as bifunctional initiator, in the presence of stannous octoate yielded the corresponding tetrablock copolymer, PCL‐PS‐PMMA‐PCL. Finally, the polymerization of tert‐butyl acrylate (tBA) via iniferter process gave the targeted H‐shaped block copolymer. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4601–4607     

Synthesis of inverse star block copolymer by combination of ATRP,ring opening polymerization,and “click chemistry”

The inverse star block copolymer, (poly(ε‐caprolactone)‐b‐polystyrene)₂‐core‐(poly(ε‐caprolactone)‐b‐polystyrene)₂, [(PCL‐PS)₂‐core‐(PCL‐PS)₂] has been successfully prepared by combination of atom transfer radical polymerization (ATRP), ring opening polymerization (ROP), and “Click Chemistry.” The synthesis includes the following five steps: (1) synthesis of a heterofunctional initiator with two ATRP initiating groups and two hydroxyl groups; (2) formation of (Br‐PS)₂‐core‐(OH)₂ via ATRP of styrene; (3) preparation of the (PCL‐PS)₂‐core‐(OH)₂ through “click” reaction of the α‐propargyl, ω‐acetyl terminated PCL with (N₃‐PS)₂‐core‐(OH)₂ which was prepared by transformation of the terminal bromine groups in (Br‐PS)₂‐core‐(OH)₂ into azide groups; (4) the ROP of CL using (PCL‐PS)₂‐core‐(OH)₂ as macroinitiator to form (PCL‐PS)₂‐core‐(PCL‐OH)₂; and (5) preparation of the (PCL‐PS)₂‐core‐(PCL‐PS)₂ through the ATRP of styrene using (PCL‐PS)₂‐core‐(PCL‐Br)₂ as macroinitiator which was prepared by reaction of the terminal hydroxyl groups at the end of the PCL chains with 2‐bromoisobutyryl bromide. The characterization data support structures of the inverse star block copolymer and the intermediates. The differential scanning calorimeter results and polarized optical microscope observation showed that the intricate structure of the inverse star block copolymer greatly restricted the movement of the PS segments and PCL segments, resulted in the increase of the glass transition temperature of PS segments and the decrease of crystallization ability of PCL segments. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7757–7772, 2008     

Pursuit of reinitiation efficiency of resonance‐stabilized monomeric allyl radical generated via “degradative monomer chain transfer” in allyl polymerization

For a deeper understanding of allyl polymerization mechanism, the reinitiation efficiency of resonance‐stabilized monomeric allyl radical was pursued because in allyl polymerization it is commonly conceived that the monomeric allyl radical generated via the allylic hydrogen abstraction of growing polymer radical from monomer, i.e., “degradative monomer chain transfer,” has much less tendency to initiate a new polymer chain and, therefore, this monomer chain transfer is essentially a termination reaction. Based on the renewed allyl polymerization mechanism in our preceding article, the monomer chain transfer constant in the polymerization of allyl benzoate was estimated to be 2.7 × 10^?2 at 80 °C under the polymerization condition, where the coupling termination reaction of growing polymer radical with allyl radical was negligible and, concurrently, the reinitiation reaction of allyl radical was enhanced significantly. The reinitiation efficiencies of monomeric allyl radical were pursued by the dead‐end polymerizations of allyl benzoate at 80, 105, and 130 °C using a small amount of initiators; they increased remarkably with raised temperature. Thus, the enhanced reinitiation reactivity of allyl radical at an elevated temperature could bias the well‐known degradative monomer chain transfer characteristic of allyl polymerization toward the chain transfer in common vinyl polymerization. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Metal‐free synthesis of responsive polymers: Cloud point tuning by controlled “click” reaction

Nitroxide‐mediated radical polymerization has been used for the preparation of pentafluorostyrene (PFS) homopolymers and random copolymers of PFS and oligo(ethyleneglycol) methacrylate (OEGMA_8.5). The poly(pentafluorostyrene) homopolymers were reacted with thiophenol at different ratios at room temperature in the presence of triethylamine. The “clicked” polymers were characterized by ¹H and ¹⁹F NMR spectroscopy and size exclusion chromatography. Moreover, the copolymerization kinetics of the PFS and OEGMA_8.5 copolymers was followed, and the phase transition behavior of random copolymers with different compositions was discussed. Furthermore, copolymers of PFS and 2‐(dimethylamino) ethyl methacrylate (DMAEMA) were prepared at various mole ratios, and the copolymer with a 10:90 ratio, respectively, was soluble in water at room temperature. Turbidimetry measurements were performed for PFS and OEGMA_8.5 or DMAEMA copolymers to determine their cloud points. Finally, the PFS and OEGMA_8.5 copolymer with a mole ratio of 60:40 was reacted further with thiophenol to increase the hydrophobic part in the copolymer. The cloud points of the obtained copolymers could be tuned from 87 to 33 °C by using not only the controlled radical polymerization but also the “click” reaction in a controlled fashion. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1278–1286, 2010