High‐performance amorphous donor–acceptor conjugated polymers containing x‐shaped anthracene‐based monomer and 2,5‐bis(2‐octyldodecyl)pyrrolo[3,4‐c]pyrrole‐1,4(2H,5H)‐dione for organic thin‐film transistors

New diketopyrrolopyrrole (DPP)‐containing amorphous conjugated polymers, such as poly(3‐(5‐((9,10‐bis((4‐hexylphenyl)ethynyl)‐6‐(prop‐1‐ynyl)anthracen‐2‐yl)ethynyl) thiophen‐2‐yl)‐5‐(2‐hexyldecyl)‐2‐(2‐octyldodecyl)‐6‐(thiophen‐2‐yl)pyrrolo[3,4‐c]pyrrole‐1,4(2H,5H)‐dione) ( 4 ), and poly(3‐(5‐((2,6‐bis((4‐hexylphenyl)ethynyl)‐10‐(prop‐1‐ynyl)anthracen‐9‐yl)ethynyl)thiophen‐2‐yl)‐2,5‐bis(2‐octyldodecyl)‐6‐(thio phen‐2‐yl)pyrrolo[3,4‐c]pyrrole‐1,4(2H,5H)‐dione) ( 7 ), were successfully synthesized via Sonogashira coupling reactions under microwave conditions. Copolymer 7 , incorporating a DPP moiety at the 9,10‐position of the anthracene ring through a triple bond, showed a much lower bandgap energy (E_g = 1.81 eV) than copolymer 4 (E_g = 2.13 eV). Tuning of the molecular frontier orbital energies was achieved by only changing the anchoring position of dithiophenyl‐DPP from the 2,6‐ to the 9,10‐position in the anthracene ring. Because of the donor–acceptor (D–A) interaction and the two‐dimensional planar structure of the X‐shaped donor monomer, the resulting polymers showed good interchain π?π stacking in the thin‐film state, despite being amorphous polymers. When the newly synthesized polymer 7 was used as a semiconductor material in an organic thin‐film transistor, the best mobility of up to 0.12 cm² V^?1 s^?1 (I_on/off = ～ 4.4 × 10⁶) was observed, which is one of the highest values recorded for amorphous polymer films reported to date. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and Photovoltaic Properties of Thieno[3,4‐c]pyrrole‐4,6‐dione‐based donor–acceptor Copolymers

Three donor–acceptor (D–A) 1,3‐di(thien‐2‐yl)thieno [3,4‐c]pyrrole‐4,6‐dione‐based copolymers, poly{9,9‐dioctylfluorene‐2,7‐diyl‐alt‐1,3‐bis(4‐hexylthien‐2‐yl)‐5‐octylthieno[3,4‐c]pyrrole‐4,6‐dione}, poly{N‐(1‐octylnonyl)carbazole‐2,7‐diyl‐alt‐1,3‐bis(4‐hexylthien‐2‐yl)‐5‐octylthieno[3,4‐c]pyrrole‐4,6‐dione}, and poly {4,8‐bis(2‐ethylhexyloxyl) benzo[1,2‐b:3,4‐b′]dithiophene‐alt‐1,3‐bis(4‐hexylthien‐2‐yl)‐5‐octylthieno[3,4‐c] pyrrole‐4,6‐dione} were synthesized by Suzuki or Stille coupling reaction. By changing the donor segment, the bandgaps and energy levels of these copolymers could be finely tuned. Cyclic voltammetric study shows that the highest occupied molecular orbital (HOMO) energy levels of the three copolymers are deep‐lying, which implies that these copolymers have good stability in the air and the relatively low HOMO energy level assures a higher open‐circuit potential when they are used in photovoltaic cells. Bulk‐heterojunction photovoltaic cells were fabricated with these polymers as the donors and PC₇₁BM as the acceptor. The cells based on the three copolymers exhibited power conversion efficiencies of 0.22, 0.74, and 3.11% with large open‐circuit potential of 1.01, 0.99, and 0.90 V under one sun of AM 1.5 solar simulator illumination (100 mW/cm²). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Highly fluorescent polycaprolactones decorated with di(thiophene‐2‐yl)‐diketopyrrolopyrrole: A covalent strategy of tuning fluorescence properties in solid states

Well‐defined 1,4‐diketo‐3,6‐di(thiophen‐2‐yl)pyrrolo[3,4‐c]pyrrole (DTDPP) labeled polycaprolactones (PCL) with different chain lengths were synthesized and characterized. The effect of polymer chain lengths on the optical properties of DTDPP in solid states was studied by UV‐Vis absorption spectroscopy as well as steady‐state and dynamic fluorescence spectroscopies. Our results indicate that when the PCL side chain is extended to a certain length, the intermolecular aggregation of DTDPP units can be reduced significantly due to segregation effect of PCL. This approach offers a new facile strategy to address the common problem of aggregation‐caused quenching existing in organic fluorophores. These highly fluorescent biodegradable PCL polymers may find broad biomedical applications such as fluorescence‐based bioimaging and tissue engineering. © 2015 Wiley Periodicals, Inc. J. Polym. Sci. Part A: Polym. Chem. 2015 , 53, 1032–1042     

Synthesis and characterization of phenanthrocarbazole–diketopyrrolopyrrole copolymer for high‐performance field‐effect transistors

In this study, we successfully designed and synthesized a novel phenanthro[1,10,9,8‐c,d,e,f,g]carbazole ( PCZ )‐based copolymer poly[N‐(2‐octyldodecyl)‐4,8‐phenanthro[1,10,9,8‐c,d,e,f,g]carbazole‐alt‐2,5‐dihexadecyl‐3,6‐di(thiophen‐2‐yl)pyrrolo[3,4‐c]pyrrole‐1,4(2H,5H)‐dione] ( PPDPP ) with an extended π‐conjugation along the vertical orientation of polymer main chain. This polymer exhibited excellent solubility in common solvent and high thermal stability, owning good properties for solution‐processed field‐effect transistors (FETs). Besides, absorption spectra demonstrated that annealing PPDPP thin films led to obviously red‐shifted maxima, indicating the formations of aggregation or orderly π–π stacking in their solid‐state films. X‐ray diffraction measurements indicated the crystallinity of PPDPP thin films was enhanced after high temperature annealing, which was favorable for charge transport. The solution‐processed PPDPP ‐based FET devices were fabricated with a bottom‐gate/bottom‐contact geometry. A high hole mobility of up to 0.30 cm²/Vs and a current on/off ratio above 10⁵ had been demonstrated. These results indicated that the copolymers constructed by this kind of ladder‐type cores could be promising organic semiconductors for high‐performance FET applications. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and characterization of novel red‐emitting alternating copolymers based on fluorene and diketopyrrolopyrrole derivatives

Two novel alternating copolymers, poly{9,9‐dihexylfluorene‐2,7‐diyl‐alt‐2,5‐dioctyl‐3,6‐bis(4‐phenyl)pyrrolo[3,4‐c] pyrrole‐1,4‐dione} ( P1 ) and poly{9,9‐dihexylfluorene‐2,7‐diyl‐alt‐2,5‐dioctyl‐3,6‐bis(3‐phenyl)pyrrolo[3,4‐c] pyrrole‐1,4‐dione} ( P2 ), derived from 9,9‐dihexylfluorene and diketopyrrolopyrrole (DPP), have been successfully synthesized through palladium‐catalyzed Suzuki polycondensation in good yields. P1 and P2 possess moderate molecular weights and polydispersities, well‐defined structures, and excellent thermal properties with an onset decomposition temperature around 400 °C. Both P1 and P2 in thin films exhibit red photoluminescence from DPP species exclusively, with peaks at 609 and 616 nm, respectively. Cyclic voltammetry studies show that P1 and P2 have low‐lying lowest unoccupied molecular orbital energy levels at ?3.65 eV and reversible reduction processes, so these polymers may constitute another kind of red‐emitting polymer with high electron affinity. Preliminary electroluminescent results of devices with an indium tin oxide/poly(3,4‐ethylenedioxythiophene)/polymer/Ba/Al configuration reveal that P1 may be a promising candidate for red emitters with a maximum brightness of 153 cd/m² and a maximum external quantum efficiency of 0.13%, whereas the performance of P2 is relatively poor. These differences might originate from different conjugation lengths in their main chain. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2395–2405, 2006     

Poly(1,4‐diketo‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole‐alt−3,6‐carbazole/2,7‐fluorene) as high‐performance two‐photon dyes

This article reports the synthesis, one‐ and two‐photon absorption, and excited fluorescence properties of poly(1,4‐diketo‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole‐alt‐N‐octyl‐3,6‐carbazole/2,7‐fluorene) ( PDCZ / PDFL ). PDCZ and PDFL are synthesized by the Suzuki cross‐coupling of 2,5‐dioctyl‐1,4‐diketo‐3,6‐bis(p‐bromophenylpyrrolo[3,4‐c]pyrrole and N‐octyl‐3,6‐bis(3,3‐dimethyl‐1,3,2‐dioxaborolan‐2‐yl)carbazole or 2,7‐bis(3,3‐dimethyl‐1,3,2‐dioxaborolan‐2‐yl)fluorene and have number‐average molecular weights of 8.5 × 10³ and 1.14 × 10⁴ g/mol and polydispersities of 2.06 and 1.83, respectively. They are highly soluble in common organic solvents and emit strong orange one‐ and two‐photon excited fluorescence (2PEF) in THF solution and exhibit high light and heat stability. The maximal two‐photon absorption cross‐sections (δ) measured in THF solution by the 2PEF method using femtosecond laser pulses are 970 and 900 GM per repeating unit for PDCZ and PDFL , respectively. These 1,4‐diketo‐pyrrolo[3,4‐c]pyrrole‐containing polymers with full aromatic structure and large δ will be promising high‐performance 2PA dyes applicable in two‐photon science and technology. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 944–951     

An Efficient and Facile Synthesis of 5‐(Thiophene‐2‐carbonyl)‐6‐(trifluoromethyl)‐tetrahydro‐pyrimidin‐2(1H)‐one and 6‐(Thiophen‐2‐yl)‐4,5‐dihydropyrimidin‐2(1H)‐one from Same Substrates Under Different Conditions

A series of 5‐(thiophene‐2‐carbonyl)‐6‐(trifluoromethyl)‐tetrahydropyrimidin‐2(1H)‐one and 6‐(thiophen‐2‐yl)‐4,5‐dihydropyrimidin‐2(1H)‐one derivatives have been synthesized from the reactions of aromatic aldehydes, 4,4,4‐trifluoro‐1‐(thien‐2‐yl)butane‐1,3‐dione and urea under the different conditions with high yields. In this research, it was found that the p‐toluenesulfonic acid was an efficient catalyst for obtaining 5‐(thiophene‐2‐carbonyl)‐6‐(trifluoromethyl)‐tetrahydropyrimidin‐2(1H)‐one derivative. At the same time, solvent‐free and NaOH were the preferred conditions for the synthesis of 6‐(thiophen‐2‐yl)‐4,5‐dihydropyrimidin‐2(1H)‐one derivative. Moreover, because of short reaction time, excellent yields, simple setup, this research offered an efficient process for preparing these kind compounds.     

Synthesis,properties, and field effect transistor characteristics of new thiophene‐[1,2,5]thiadiazolo[3,4‐g]quinoxaline‐thiophene‐based conjugated polymers

Four new conjugated copolymers based on the moiety of bis(4‐hexylthiophen‐2‐yl)‐6,7‐diheptyl‐[1,2,5]thiadiazolo[3,4‐g]quinoxaline (BTHTQ) were synthesized and characterized, including poly(6,7‐diheptyl‐4,9‐bis(4‐hexylthiophen‐2‐yl)‐[1,2,5]thiadiazolo[3,4‐g]quinoxaline) (PBTHTQ), poly‐(6,7‐diheptyl‐4,9‐bis(4‐hexylthiophen‐2‐yl)‐[1,2,5]thiadiazolo‐[3,4‐g]quinoxaline‐alt‐2,5‐thiophene) (PTTHTQ), poly(6,7‐diheptyl‐4,9‐bis(4‐hexylthiophen‐2‐yl) [1,2,5]‐thiadiazolo‐[3,4‐g]quinoxaline‐alt‐9,9‐dioctyl‐2,7‐fluore‐ne) (PFBTHTQ), and poly(6,7‐diheptyl‐4,9‐bis(4‐hexylthiophen‐2‐yl)‐[1,2,5]thiadiazolo[3,4‐g]quinoxaline‐alt‐1,4‐bis(decyloxy)phenylene) (PPBTHTQ). The λ_max of PBTHTQ, PTTHTQ, PFBTHTQ, and PPBTHTP thin films was shown at 780, 876, 734, and 710 nm, respectively, with the corresponding optical band gaps (E) of 1.31, 1.05, 1.40, and 1.43 eV. The relatively small band gaps of the synthesized polymers suggested the significance of intramolecular charge transfer between the donor and TQ moiety. The estimated hole mobilities of PBTHTQ, PTTHTQ, and PFBTHTQ‐based field effect transistor devices using CHCl₃ solvent were 8.5 × 10^?5, 8.5 × 10^?4, and 2.8 × 10^?5 cm² V^?1 s^?1, respectively, but significantly enhanced to 1.6 × 10^?4, 3.8 × 10^?3, and 1.5 × 10^?4 cm² V^?1 s^?1 using high boiling point solvent of chlorobenzene (CB). The higher hole mobility of PTTHTQ than the other two copolymers was attributed from its smaller band gap or ordered morphology [wormlike (chloroform) or needle‐like (CB)]. The characteristics of small band gap and high mobility suggest the potential applications of the BTHTQ‐based conjugated copolymers in electronic and optoelectronic devices. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6305–6316, 2008     

Pyrrolo[3,4‐c]pyrrole‐1,3‐dione‐based large band gap polymers containing benzodithiophene derivatives for highly efficient simple structured polymer solar cells

Pyrrolo[3,4‐c]pyrrole‐1,3(2H,5H)‐dione (DPPD)‐based large band gap polymers, P(BDT‐TDPPDT) and P(BDTT‐TDPPDT), are prepared by copolymerizing electron‐rich 4,8‐bis(2‐ethylhexyloxy)benzo[1,2‐b:4,5‐b′]dithiophene (BDT) or 4,8‐bis(5‐(2‐ethylhexyl)thiophen‐2‐yl)benzo[1,2‐b:4,5‐b′]dithiophene (BDTT) unit with novel electron deficient 2,5‐dioctyl‐4,6‐di(thiophen‐2‐yl)pyrrolo[3,4‐c]pyrrole‐1,3(2H,5H)‐dione (TDPPDT) unit. The absorption bands of polymers P(BDT‐TDPPDT) and P(BDTT‐TDPPDT) cover the region from 300 to 600 nm with an optical band gap of 2.11 eV and 2.04 eV, respectively. The electrochemical study illustrates that the highest occupied/lowest unoccupied molecular orbital energy levels of P(BDT‐TDPPDT) and P(BDTT‐TDPPDT) are ?5.39 eV/?3.28 eV and ?5.44 eV/?3.40 eV, respectively. The single layer polymer solar cell (PSC) fabricated with a device structure of ITO/PEDOT:PSS/P(BDT‐TDPPDT) or P(BDTT‐TDPPDT):PC70BM+DIO/Al offers a maximum power conversion efficiency (PCE) of 6.74% and 6.57%, respectively. The high photovoltaic parameters such as fill factor (～72%), open circuit voltage (V_oc, ～0.90 V), incident photon to collected electron efficiency (～76%), and PCE obtained for the PSCs made from polymers P(BDT‐TDPPDT) and P(BDTT‐TDPPDT) make them as promising large band gap polymeric candidates for PSC application. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3564–3574     

Fused structures in the polymer backbone to investigate the photovoltaic and electrochromic properties of donor–acceptor‐type conjugated polymers

In this study, two new benzotriazole (BTz) and dithienothiophene (DTT) containing conjugated polymers were synthesized. After successful characterizations of the monomers by proton‐nuclear magnetic resonance (¹H NMR) and carbon‐NMR (¹³C NMR) techniques, poly(4‐(dithieno[3, 2‐b:2′,3′‐d]thiophen‐2‐yl)‐2‐(2‐octyldodecyl)‐2H‐benzo[d][1,2,3] triazole) P1 and poly(4‐(5‐(dithieno[3,2‐b:2′,3′‐d]thiophen‐2‐yl)thiophen‐2‐yl)‐2‐(2‐octyldodecyl)‐7‐(thiophen‐2‐yl)‐2H‐benzo[d][1,2,3]triazole) P2 were synthesized via a typical Stille coupling. Electrochemical and spectroelectrochemical studies showed that both polymers can be multipurpose materials and used in electrochromic and photovoltaic applications. Reported study indicated that incorporation of DTT into the structure leads to fast switching times compared with BTz‐based polymers and competent percentage transmittance in the near‐infrared region. Multichromism is important in the context of low‐cost flexible display device technology and both polymers are ambipolar and processable as well as multichromic. Throughout the preliminary photovoltaic studies, the best performances of photovoltaic devices were found as V_oc = 0.49 V, J_sc = 0.83 mA/cm², fill factor (FF) = 34.4%, and power conversion efficiency (PCE) = 0.14% for P1 , and as V_oc = 0.35 V, J_sc = 1.57 mA/cm², FF = 38.2%, and PCE = 0.21% for P2 . © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and Characterization of the First Bisand Tris[1‐(ω‐alken‐1‐yl)indenyl]lanthanide Complexes

1‐Allyl‐2,4,7‐trimethyl‐1 H‐indene ( 1 ) and 1‐(3‐buten‐1‐yl)‐4,7‐dimethyl‐1 H‐indene ( 2 ), which are to prepare from (2,4,7‐trimethylindenyl)lithium and allyl chloride or from (4,7‐dimethylindenyl)lithium and 4‐bromo‐1‐butene, react with n‐butyllithium yielding (1‐allyl‐2,4,7‐trimethylindenyl)lithium [LiL ( 1 a )] or [1‐(3‐buten‐1‐yl)‐4,7‐dimethylindenyl]lithium [LiL′ ( 2 a )], respectively. The reactions of the trichlorides of gadolinium, erbium, yttrium, lutetium, and ytterbium with 1 a or 2 a (mole ratio 1 : 2) in THF produce the bis(indenyl)lanthanide chloride complexes L₂LnCl(THF) [Ln = Gd ( 1 b ), Er ( 1 c )], LLnCl(THF) [Y ( 2 d ), Lu ( 2 e )], or LYb(μ‐Cl)₂Li(THF)₂ ( 2 f ), whereas the trichlorides of the comparatively large samarium and lanthanum ions react with different molar amounts of 2 a in THF exclusively with formation of the tris(indenyl) complexes LSm ( 2 g ) or LLa(μ‐Cl)Li(Et₂O)₃ ( 2 h ), respectively. All new compounds were characterized by elemental analyses, mass spectrometry, and the diamagnetic compounds 2 d , 2 e and 2 h also by ¹H and ¹³C{¹H}‐NMR spectroscopy. The single crystal X‐ray structural analyses of 1 c , 2 f , 2 g and 2 h demonstrate that the alkenyl groups of the indenyl side chains are not coordinated to the lanthanide atoms.     

Synthesis,structure and biological activity of new 6,6‐dimethyl‐2‐oxo‐4‐{2‐[5‐organylsilyl(germyl)]furan(thiophen)‐2‐yl}vinyl‐5,6‐dihydro‐2H‐pyran‐3‐carbonitriles

New 6,6‐dimethyl‐2‐oxo‐4‐{2‐[5‐alkylsilyl(germyl)]furan(thiophen)‐2‐yl}vinyl‐5,6‐dihydro‐2H‐pyran‐3‐carbonitriles (IC₅₀: 1–6 µg ml^?1) have been prepared by the condensation of corresponding silicon‐ and germanium‐containing furyl(thienyl)‐2‐carbaldehydes with 3‐cyano‐4,6,6‐trimethyl‐5,6‐dihydropyran‐2‐one using piperidine acetate as a catalyst. The obtained carbonitriles were identified using NMR (¹H, ¹³C and ²⁹Si) spectroscopy and GC‐MS. The structure of 6,6‐dimethyl‐2‐oxo‐4‐[2‐(5‐trimethylsilyl)thiophen‐2‐yl]‐5,6‐dihydro‐2H‐pyran‐3‐carbonitrile was studied using X‐ray diffractometry. The influences of the heterocycle and the structure of the organoelement substituent on cytotoxicity and on matrix metalloproteinase inhibition have been studied. Copyright © 2015 John Wiley & Sons, Ltd.     

Diketopyrrolopyrrole‐based liquid crystalline conjugated donor–acceptor copolymers with reduced band gap for polymer solar cells

A new liquid crystalline (LC) acceptor monomer 2,5‐bis[4‐(4′‐cyanobiphenyloxy)dodecyl]‐3,6‐dithiophen‐2‐yl‐pyrrolo[3,4‐c]pyrrole‐1,4‐dione (TDPPcbp) was synthesized by incorporating cyanobiphenyl mesogens into diketopyrrolopyrrole (DPP). The monomer was copolymerized with bis(2‐ethylhexyloxy)benzo[1,2‐b:4,5‐b′] dithiophene (BDT) and N‐9′‐heptadecanylcarbazole (CB) donors to obtain donor–acceptor alternating copolymers poly[4,8‐bis(2‐ethylhexyloxy)benzo[1,2‐b:4,5‐b′]dithiophene‐alt‐3,6‐bis(thiophen‐5‐yl)‐2,5‐bis[4‐(4′‐cyanobiphenyloxy)dodecyl]‐2,5‐dihydropyrrolo[3,4‐c]pyrrole‐1,4‐dione] (PBDTDPPcbp) and poly[N‐9′‐heptadecanyl‐2,7‐carbazole‐alt‐3,6‐bis(thiophen‐5‐yl)‐2,5‐bis[4‐(4′‐cyano‐biphenyloxy)dodecyl]‐2,5‐dihydropyrrolo[3, 4‐c]pyrrole‐1,4‐dione] (PCBTDPPcpb) with reduced band gap, respectively. The LC properties of the copolymers, the effects of main chain variation on molecular packing, optical properties, and energy levels were analyzed. Incorporating the mesogen cyanobiphenyl units not only help polymer donors to pack well through mesogen self‐organization but also push the fullerene acceptor to form optimized phase separation. The bulk heterojunction photovoltaicdevicesshow enhanced performance of 1.3% for PBDTDPPcbp and 1.2% for PCBTDPPcbp after thermal annealing. The results indicate that mesogen‐controlled self‐organization is an efficient approach to develop well‐defined morphology and to improve the device performance. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Bipyridinophane‐containing conjugated polymers modulated with an intramolecular aromatic C?H/π interaction

Bipyridinophane–fluorene conjugated copolymers have been synthesized via Suzuki and Heck coupling reactions from 5,8‐dibromo‐2,11‐dithia[3]paracyclo[3](4,4′)‐2,2′‐bipyridinophane and suitable fluorene precursors. Poly[2,7‐(9,9‐dihexylfluorene)‐co‐alt‐5,8‐(2,11‐dithia[3]paracyclo[3](4,4′)‐2,2′‐bipyridinophane)] ( P7 ) exhibits large absorption and emission redshifts of 20 and 34 nm, respectively, with respect to its planar reference polymer Poly[2,7‐(9,9‐dihexylfluorene)‐co‐alt‐1,4‐(2,5‐dimethylbenzene)] ( P11 ), which bears the same polymer backbone as P7 . These spectral shifts originate from intramolecular aromatic C? H/π interactions, which are evidenced by ultraviolet–visible and ¹H NMR spectra as well as X‐ray single‐crystal structural analysis. However, the effect of the intramolecular aromatic C? H/π interactions on the spectral shift in poly[9,9‐dihexylfluorene‐2,7‐yleneethynylene‐co‐alt‐5,8‐(2,11‐dithia[3]paracyclo[3](4,4′)‐2,2′‐bipyridinophane)] ( P10 ) is much weaker. Most interestingly, the quenching behaviors of these two conjugated polymers are largely dependent on the polymer backbone. For example, the fluorescence of P7 is efficiently quenched by Cu²⁺, Co²⁺, Ni²⁺, Zn²⁺, Mn²⁺, and Ag⁺ ions. In contrast, only Cu²⁺, Co²⁺, and Ni²⁺ ions can partially quench the fluorescence of P10 , but much less efficiently than the fluorescence of P7 . The static Stern–Volmer quenching constants of Cu²⁺, Co²⁺, and Ni²⁺ ions toward P7 are of the order of 10⁶ M^?1, being 1300, 2500, and 37,300 times larger than those of P10 , respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4154–4164, 2006     

Rb2Co3(H2O)2[B4P6O24(OH)2]: Ein Borophosphat mit ‐Tetraeder‐Anionenteilstruktur und Oktaeder‐Trimeren (CoO12(H2O)2)

Rb₂Co₃(H₂O)₂[B₄P₆O₂₄(OH)₂]: A Borophosphate with ‐Tetrahedral Anionic Partial Structure and Trimers of Octahedra (Co O₁₂(H₂O)₂) Rb₂Co₃(H₂O)₂[B₄P₆O₂₄(OH)₂] is formed under mild hydrothermal conditions (T = 165 °C) from mixtures of RbOH_(aq), CoCl₂, H₃BO₃, and H₃PO₄ (molar ratio 1 : 1 : 1 : 2). The crystal structure (orthorhombic system) was solved by X‐ray single crystal methods (space group Pbca, No. 61; R‐values (all data): R1 = 0.0699, wR2 = 0.0878): a = 950.1(1) pm, b = 1227.2(2) pm, c = 2007.4(2) pm; Z = 4. The anionic partial structure consists of tetrahedral [B₄P₆O₂₄(OH)₂^8–] layers, which contain three‐ and nine‐membered rings. Co^II is octahedrally coordinated by oxygen and oxygen and H₂O ligands, respectively (coordination octahedra CoO₆ and CoO₄(H₂O)₂). Three adjacent coordination octahedra are condensed via common edges to form trimeric units (CoO₁₂(H₂O)₂). The oxidation state +2 of cobalt was confirmed by magnetic measurements. The octahedral trimers are quasi‐isolated. No long‐range magnetic ordering occurs down to 2 K. Rb⁺ is disordered over three crystallographically independent sites within channels of the structure running parallel [010]; the coordination sphere of Rb⁺ is formed by nine oxygen species of the tetrahedral layers, one OH group and one H₂O molecule.     

Synthesis and heterocyclizations of 3‐alkynyl‐6,8‐dimethylpyrimido‐[4,5‐c]pyridazine‐5,7(6H,8H)‐diones and their lumazine analogues

Synthesis of some condensed pyrrolo‐, thieno‐, furo‐, pyrido‐ and pyranopteridines as well as isomeric pyrrolo‐ and thienopyrimido[4,5‐c]pyridazines from alkynyl derivatives of 6,8‐dimethylpyrimido[4,5‐c]pyridazine‐5,7(6H,8H)‐dione and 1,3‐dimethyllumazine is represented.     

Chiral recognition in molecular and macromolecular pairs of (S)‐ and (R)‐1‐cyano‐2‐methylpropyl‐4′‐ {[4‐(8‐vinyloxyoctyloxy)benzoyl]oxy}biphenyl‐4‐ carboxylate enantiomers

(S)‐1‐Cyano‐2‐methylpropyl‐4′‐{[4‐(8‐vinyloxyoctyloxy)benzoyl]oxy}biphenyl‐ 4‐carboxylate [ (S)‐11 ] and (R)‐1‐cyano‐2‐methylpropyl‐4′‐{[4‐(8‐vinyloxyoctyloxy)benzoyl]oxy}biphenyl‐4‐carboxylate [( R)‐11 ] enantiomers, both greater than 99% enantiomeric excess, and their corresponding homopolymers, poly[ (S)‐11 ] and poly[ (R)‐11 ], with well‐defined molecular weights and narrow molecular weight distributions were synthesized and characterized. The mesomorphic behaviors of (S)‐11 and poly[ (S)‐11 ] are identical to those of (R)‐11 and poly[ (R)‐11 ], respectively. Both (S)‐11 and (R)‐11 exhibit enantiotropic S_A, S, and S_X (unidentified smectic) phases. The corresponding homopolymers exhibit S_A and S phases. The homopolymers with a degree of polymerization (DP) less than 6 also show a crystalline phase, whereas those with a DP greater than 10 exhibit a second S_X phase. Phase diagrams were investigated for four different pairs of enantiomers, (S)‐11 /( R)‐11 , (S)‐11 /poly[ (R)‐11 ], and poly[ (S)‐11 ]/poly[ (R)‐11 ], with similar and dissimilar molecular weights. In all cases, the structural units derived from the enantiomeric components are miscible and, therefore, isomorphic in the S_A and S phases over the entire range of enantiomeric composition. Chiral molecular recognition was observed in the S_A and S_X phases of the monomers but not in the S_A phase of the polymers. In addition, a very unusual chiral molecular recognition effect was detected in the S phase of the monomers below their crystallization temperature and in the S phase of the polymers below their glass‐transition temperature. In the S phase of the monomers above the melting temperature and of the polymers above the glass‐transition temperature, nonideal solution behavior was observed. However, in the S_A phase the monomer–polymer and polymer–polymer mixtures behave as an ideal solution. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3631–3655, 2000     

Enhancing electrochromic properties of conducting polymers via copolymerization: Copolymer of 1‐(4‐fluorophenyl)‐2,5‐di(thiophen‐2‐yl)‐1H‐pyrrole with 3,4‐ethylene dioxythiophene

A copolymer of 1‐(4‐fluorophenyl)‐2,5‐di(thiophen‐2‐yl)‐1H‐pyrrole (FPTP) with 3,4‐ethylene dioxythiophene (EDOT) was electrochemically synthesized and characterized. While poly(FPTP) (P(FPTP)) has only two colors in its oxidized and neutral states (blue and yellow), its copolymer with EDOT has five different colors (purple, red, light gray, green, and blue). Electrochromic devices based on P(FPTP‐co‐EDOT) and poly(3,4‐ethylenedioxythiophene) (PEDOT) were constructed and characterized. The oxidized state of the device shows blue color whereas it shows purple for the reduced state. At several potentials the device has good transparency with green and gray colors. Maximum contrast (Δ%T) and switching time of the device were measured as 23% and 1.1 s at 555 nm. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4496–4503, 2007     

New alternating D–A1–D–A2 copolymer containing two electron‐deficient moieties based on benzothiadiazole and 9‐(2‐Octyldodecyl)‐8H‐pyrrolo[3,4‐b]bisthieno[2,3‐f:3',2'‐h]quinoxaline‐8,10(9H)‐dione for efficient polymer solar cells

A novel D–A₁–D–A₂ copolymer denoted as P1 containing two electron withdrawing units based on benzothiadiazole (BT) and 9‐(2‐octyldodecyl)?8H‐pyrrolo[3,4‐b] bisthieno[2,3‐f:3′,2′‐h]quinoxaline‐8,10(9H)–dione (PTQD) units was synthesized and characterized. The resulting copolymer exhibits a broad‐absorption spectrum, relatively deep lying HOMO energy level (?5.44 eV) and narrow optical bandgap (1.50 eV). Bulk heterojunction (BHJ) polymer solar cells (PSCs) based on P1 as donor and PC₇₁BM as acceptor with optimized donor to acceptor weight ratio of 1:2 and processed with DIO/CB solvent showed good photovoltaic performance with power conversion efficiency of 6.21% which is higher than that of the device processed without solvent additive (4.40%). The absorption and morphology investigations of the active layers indicated that structural and morphological changes were induced by the solvent additive. This higher power conversion efficiency could be mainly attributed to the absorption enhancement and improved charge transported in the active layer induced by the better nanoscale morphology of the active layer. This study demonstrated that a copolymer with two different acceptor moieties in the backbone may be promising candidate as donor copolymer for solution processed BHJ PSCs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 155–168