Innenrücktitelbild: Developing Conjugated Polymers with High Electron Affinity by Replacing a C?C Unit with a B←N Unit (Angew. Chem. 12/2015)

The key parameters of conjugated polymers are lowest unoccupied molecular orbital (LUMO) and highest occupied molecular orbital (HOMO) energy levels. Few approaches can simultaneously lower LUMO and HOMO energy levels of conjugated polymers to a large extent (>0.5 eV). Disclosed herein is a novel strategy to decrease both LUMO and HOMO energy levels of conjugated polymers by about 0.6 eV through replacement of a C C unit by a B←N unit. The replacement makes the resulting polymer transform from an electron donor into an electron acceptor, and is proven by fluorescence quenching experiments and the photovoltaic response. This work not only provides an effective approach to tune the LUMO/HOMO energy levels of conjugated polymers, but also uses organic boron chemistry as a new toolbox to develop conjugated polymers with high electron affinity for polymer optoelectronic devices.     

Developing Conjugated Polymers with High Electron Affinity by Replacing a CC Unit with a B←N Unit

The key parameters of conjugated polymers are lowest unoccupied molecular orbital (LUMO) and highest occupied molecular orbital (HOMO) energy levels. Few approaches can simultaneously lower LUMO and HOMO energy levels of conjugated polymers to a large extent (>0.5 eV). Disclosed herein is a novel strategy to decrease both LUMO and HOMO energy levels of conjugated polymers by about 0.6 eV through replacement of a C? C unit by a B←N unit. The replacement makes the resulting polymer transform from an electron donor into an electron acceptor, and is proven by fluorescence quenching experiments and the photovoltaic response. This work not only provides an effective approach to tune the LUMO/HOMO energy levels of conjugated polymers, but also uses organic boron chemistry as a new toolbox to develop conjugated polymers with high electron affinity for polymer optoelectronic devices.     

Directly Linked Zinc Phthalocyanine–Perylenediimide Dyads and a Triad for Ultrafast Charge Separation

Directly linked to promote strong intramolecular interactions, donor–acceptor dyads and a donor–acceptor–donor triad featuring zinc phthalocyanine (ZnPc) as electron donor and perylenediimide (PDI) as electron acceptor have been synthesized and characterized. Owing to complementary absorption features of the entities, improved light absorption was witnessed in these conjugates. The optimized geometry and electronic structures showed the majority of the highest occupied molecular orbital (HOMO) on the ZnPc entity, whereas the lowest unoccupied molecular orbital (LUMO) was on the PDI entity, suggesting that the charge-separated states would be ZnPc ⁺ –PDI ^{. −}. The electrochemical and free-energy calculations suggested exothermic energy and/or electron transfer processes via the singlet states of PDI or ZnPc entities depending on the excitation wavelength of the laser used. The measured rates using femtosecond pump-probe spectroscopy coupled with global analysis of transient data revealed ultrafast energy transfer from ¹PDI* to ZnPc followed by charge separation. However, when ZnPc was selectively excited, only electron transfer was witnessed wherein the time constants for forward and reverse electron transfer processes followed Marcus predictions. The absorption in a wide section of the solar spectrum and the ultrafast charge separation suggest the usefulness of these systems as good photosynthetic models.     

Energy level tuning of polythiophene derivative by click chemistry‐type postfunctionalization of side‐chain alkynes

A polythiophene derivative substituted with electron‐rich alkynes as a side chain was synthesized using the Suzuki polycondensation reaction. The electron‐rich alkynes underwent the “click chemistry”‐type quantitative addition reaction with strong acceptor molecules, such as tetracyanoethylene (TCNE) and 7,7,8,8‐tetracyanoquinodimethane (TCNQ), resulting in the formation of donor–acceptor chromophores. All polymers showed excellent solubilities in the common organic solvents as well as good thermal stabilities with their 5% decomposition temperatures exceeding 230 °C. The TCNE‐/TCNQ‐adducted polymers displayed well‐defined charge‐transfer (CT) bands in the low energy region. The CT energy of the TCNE‐adducted polymer was 2.56 eV (484 nm), which was much greater than that of the TCNQ‐adducted polymer [1.65 eV (750 nm)]. This result was supported by the electrochemical measurements. The electrochemical band gaps of the TCNE‐adducted polymers were much greater than those of the corresponding TCNQ‐adducted polymers. Furthermore, the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels, determined from the first oxidation and first reduction peak potentials, respectively, decreased with the increasing acceptor addition amount. All these results suggested that the energy levels of the polythiophene derivative can be tuned by varying the species and amount of the acceptor molecules using this postfunctionalization method. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Ladder‐Type Nonacyclic Arene Bis(thieno[3,2‐b]thieno)cyclopentafluorene as a Promising Building Block for Non‐Fullerene Acceptors

The ladder‐type nonacyclic arene (bis(thieno[3,2‐b]thieno)cyclopentafluorene (BTTF)) has been designed and synthesized through fusing thienothiophenes with the fluorene core from the synthon of dimethyl 9,9‐dioctyl‐2,7‐bis(thieno[3,2‐b]thiophen‐2‐yl)fluorene‐3,6‐dicarboxylate. With BTTF as the central donor unit, a novel acceptor–donor–acceptor (A‐D‐A) type non‐fullerene small‐molecule acceptor ( BTTFIC ) was prepared with 1,1‐dicyanomethylene‐3‐indanones (IC) as the peripheral acceptor units. The energy level of the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) of BTTFIC locate at ?5.56 and ?3.95 eV, respectively, presenting a low optical band gap of 1.58 eV. Encouragingly, polymer solar cells based on the blends of BTTFIC with both the representative wide‐ and low‐bandgap polymer donors (PBDB‐T, 1.82 eV. PTB7‐Th, 1.58 eV) offer power conversion efficiencies over 8 % (8.78±0.18 % for PBDB‐T: BTTFIC and 8.18±0.29 % for PTB7‐Th: BTTFIC ). These results highlight the advantage of ladder‐type BTTF on the preparation of nonfullerene acceptors with extended conjugated backbones.     

Optical properties of (Z)‐2‐(2‐phenylhydrazinylidene)acenaphthen‐1(2H)‐one: a potential electron donor in organic solar cells

Electron‐donating molecules play an important role in the development of organic solar cells. (Z )‐2‐(2‐Phenylhydrazinylidene)acenaphthen‐1(2H )‐one (PDAK), C₁₈H₁₂N₂O, was synthesized by a Schiff base reaction. The crystal structure shows that the molecules are planar and are linked together forming `face‐to‐face' assemblies held together by intermolecular C—H…O, π–π and C—H…π interactions. PDAK exhibits a broadband UV–Vis absorption (200–648 nm) and a low HOMO–LUMO energy gap (1.91 eV; HOMO is the highest occupied molecular orbital and LUMO is the lowest unoccupied molecular orbital), while fluorescence quenching experiments provide evidence for electron transfer from the excited state of PDAK to C₆₀. This suggests that the title molecule may be a suitable donor for use in organic solar cells.     

A Non‐Fullerene Acceptor with Chlorinated Thienyl Conjugated Side Chains for High‐Performance Polymer Solar Cells via Toluene Processing

Small molecular acceptors (SMAs) BTC‐2F and BTH‐2F, based on heptacyclic benzodi(cyclopentadithiophene) electron‐donating core (CBT) with chlorinated‐thienyl conjugated and thienyl conjugated side chains, respectively, are designed and synthesized. Compared with non‐chlorine acceptor BTH‐2F, BTC‐2F exhibits slightly blue‐shifted absorption spectra, similar the lowest unoccupied molecular orbital (LUMO) (–3.91 eV), deeper highest occupied molecular orbital (HOMO) energy level and higher electron mobility than that of BTH‐2F. PM6, a wide bandgap polymer, is selected as the donor material to construct bulk heterojunction polymer solar cells processed with nonhalogenated solvent toluene. The optimized PM6:BTC‐2F‐based device presents a 12.9% power conversion efficiency (PCE), while the PCE of PM6:BTH‐2F‐based device is only 11.3%. The results suggest that it is an effective strategy to optimize the photoelectric properties of SMAs by incorporating chlorine atom into the conjugated side chains.     

A π‐Stacked Porphyrin–Fullerene Electron Donor–Acceptor Conjugate That Features a Surprising Frozen Geometry

A “frozen” electron donor–acceptor array that bears porphyrin and fullerene units covalently linked through the ortho position of a phenyl ring and the nitrogen of a pyrrolidine ring, respectively, is reported. Electrochemical and photophysical features suggest that the chosen linkage supports both through‐space and through‐bond interactions. In particular, it has been found that the porphyrin singlet excited state decays within a few picoseconds by means of a photoinduced electron transfer to give the rapid formation of a long‐lived charge‐separated state. Density functional theory (DFT) calculations show HOMO and LUMO to be localized on the electron‐donating porphyrin and the electron‐accepting fullerene moiety, respectively, at this level of theory. More specifically, semiempirical molecular orbital (MO) configuration interaction (CI) and unrestricted natural orbital (UNO)‐CI methods shed light on the nature of the charge‐transfer states and emphasize the importance of the close proximity of donor and acceptor for effective electron transfer.     

Donor–acceptor semiconducting polymers based on pyromellitic diimide

Three donor–acceptor copolymers P1 , P2 , and P3 with N,N′‐dodecylpyromellitic diimide as the electron‐acceptor unit with three diethynyl‐substituted donor monomers: 1,4‐diethynyl‐2,5‐bis(octyloxy)benzene, 2,7‐diethynyl‐9,9‐dioctyl‐9H‐fluorene, and 3,3′‐didodecyl‐5,5′‐diethynyl‐2,2′‐bithiophene have been synthesized by Sonogashira crosscoupling polymerization. The synthesized polymers showed deep highest occupied molecular orbital energy levels and larger band gaps (>2.5 eV). Polymers P1 , P2 , and P3 underwent fluorescence quenching with [6,6]‐phenyl‐C61‐butyric acid methyl ester (PCBM), indicating the intermolecular photo‐induced charge transfer between the donor polymers and the PCBM acceptor. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1617–1622     

Synthesis,characterization, and photovoltaic properties of dithienylbenzobisazole‐dithienylsilole copolymers

Three conjugated polymers comprised of dioctyl‐dithieno‐[2,3‐b:2',3'‐d]silole and a donor‐acceptor‐donor triad of either cis‐benzbisoxazole, trans‐benzobisoxazole or trans‐benzobisthiazole were synthesized via the Stille cross‐coupling reaction. The impact of varying the heteroatoms and/or the location within the benzobisazole moiety on the optical and electronic properties of the resulting polymers was evaluated via cyclic voltammetry and UV‐Visible spectroscopy. All of the polymers have similar optical band‐gaps of ～1.9 eV and highest occupied molecular orbital levels of ? 5.2 eV. However, the lowest unoccupied molecular orbitals (LUMO) ranged from ? 3.0 to ? 3.2 eV. Interestingly, when the polymers were used as donor materials in bulk‐heterojunction photovoltaic cells with PC₇₁BM as the electron‐acceptor, the benzobisoxazole‐based polymers gave slightly better results than the benzobisthiazole‐containing polymers with power conversion efficiencies up to 3.5%. These results indicate that benzobisoxazoles are promising materials for use in OPVs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1533–1540     

The effect of conjugated spacer on novel carbazole derivatives for dye‐sensitized solar cells: Density functional theory/time‐dependent density functional theory study

The ground‐state structure and frontier molecular orbital of D‐π‐A organic dyes, CFT1A, CFT2A, and CFT1PA were theoretically investigated using density functional theory (DFT) on B3LYP functional with 6‐31G(d,p) basis set. The vertical excitation energies and absorption spectra were obtained using time‐dependent DFT (TD‐DFT). The adsorptions of these dyes on TiO₂ anatase (101) were carried out by using a 38[TiO₂] cluster model using Perdew–Burke–Ernzerhof functional with the double numerical basis set with polarization (DNP). The results showed that the introduction of thiophene–thiophene unit (T–T) as conjugated spacer in CFT2A could affect the performance of intramolecular charge transfer significantly due to the inter‐ring torsion of T–T being decreased compared with phenylene–phenylene (P–P) spacer of CFP2A in the researhcers' previous report. It was also found that increasing the number of π‐conjugated unit gradually enhanced charge separation between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) of these dyes, leading to a high‐efficiency photocurrent generation. The HOMO–LUMO energy gaps were calculated to be 2.51, 2.37, and 2.50 eV for CFT1A, CFT2A, and CFT1PA respectively. Moreover, the calculated adsorption energies of these dyes on TiO₂ cluster were ～14 kcal/mol, implying that these dyes strongly bind to TiO₂ surface. Furthermore, the electronic HOMO and LUMO shapes of all dye–TiO₂ complexes exhibited injection mechanism of electron via intermolecular charge‐transfer transition. © 2012 Wiley Periodicals, Inc.     

An acceptor‐acceptor conjugated copolymer based on perylene diimide for high mobility n‐channel transistor in air

A new solution‐processable acceptor‐acceptor conjugated copolymer ( P1 ) based on perylene diimide (PDI) incorporating planar electron‐deficient fluorenone was synthesized by palladium(0)‐catalyzed Suzuki coupling reaction. Relative to the donor‐acceptor conjugated copolymer ( P2 ) of PDI and dithienothiophene, polymer P1 exhibits 0.1 eV down shift of lowest unoccupied molecular orbital (LUMO) level, 70 nm blue shift of low‐energy absorption band, and 0.36 eV increase of optical band gap. Polymer P1 in top‐contact bottom‐gate organic field‐effect transistors exhibits a saturation electron mobility of 0.01 cm²/(V s) in air, while P2 does not function in the same device in air. The better air stability of P1 is attributed to a more dense packing of the polymer chains excluding oxygen or water and lower LUMO level of P1 . © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Rhodanine flanked indacenodithiophene as non-fullerene acceptor for efficient polymer solar cells

A fused-ring electron acceptor IDT-2BR1 based on indacenodithiophene core with hexyl side-chains flanked by benzothiadiazole rhodanine was designed and synthesized.In comparison with its counterpart with hexylphenyl side-chains(IDT-2BR),IDT-2BR1exhibits higher highest occupied molecular orbital(HOMO)energy but similar lowest unoccupied molecular orbital(LUMO)energy(IDT-2BR1:HOMO=-5.37eV,LUMO=-3.67eV;IDT-2BR:HOMO=-5.52eV,LUMO=-3.69eV),red-shifted absorption and narrower bandgap.IDT-2BR1 has higher electron mobility(2.2×10~(-3)cm~2 V~(-1)s~(-1))than IDT-2BR(3.4×10~(-4)cm~2 V~(-1)s~(-1))due to the reduced steric hindrance and ordered molecular packing.Fullerene-free organic solar cells based on PTB7-Th:IDT-2BRl yield power conversion efficiencies up to 8.7%,higher than that of PTB7-Th:IDT-2BR(7.7%),with a high open circuit voltage of0.95 V and good device stability.     

Intramolecular Photo-Oxidation as a Potential Source to Probe Biological Electron Damage: A Carboxylated Adenosine Analogue as Case Study

A carboxylated adenosine analog (C-Ado⁻) has been synthesized and probed via time-resolved photoelectron spectroscopy in order to induce intra-molecular charge transfer from the carboxylic acid moiety to the nucleobase. Intra-molecular charge transfer can be exploited as starting point to probe low-energy electron (LEE) damage in DNA and its derivatives. Time-dependent density functional theory (TD-DFT) calculations at the B3LYP-6311G level of theory have been performed to verify that the highest occupied molecular orbital (HOMO) was located on carboxylic acid and that the lowest occupied molecular orbital (LUMO) was on the nucleobase. Hence, the carboxylic acid could work as electron source, whilst the nucleobase could serve the purpose of electron acceptor. The dynamics following excitation at 4.66 eV (266 nm) were probed using time-resolved photoelectron spectroscopy using probes at 1.55 eV (800 nm) and 3.10 eV (400 nm). The data show rapid decay of the excited state population and, based on the similarity of the overall dynamics to deoxy-adenosine monophosphate (dAMP^–), it appears that the dominant decay mechanism is internal conversion following ¹ππ* excitation of the nucleobase, rather than charge-transfer from the carboxylic acid to the nucleobase.     

Effects of different basis sets and donor‐acceptor groups on linear and second‐order nonlinear optical properties and molecular frontier orbital energies

The calculation of molecular hyperpolarizability, molecular frontier orbital energies of some donor‐acceptor oxadiazoles ( 5a – f , 8a – f , and 9a – f ) have been investigated using ab initio methods and different basis sets. Ab initio optimizations were performed at the Hartree–Fock (HF) and density functional (Beckee‐3–Lee–Yang–Parr; B3LYP) levels of theory with 6‐31G basis set. The polarizability (<α>), anisotropy of polarizability (Δα), and ground‐state dipole moment (μ), first hyperpolarizability (β), and molecular frontier orbital (HOMO, highest occupied molecular orbital and LUMO, lowest unoccupied molecular orbital) energies of 5a – f , 8a – f , and 9a – f have been calculated at the HF and B3LYP methods with 6‐31G, 6‐31G(d), 6‐31+G(d), 6‐31++G(d,p), 6‐311G, 6‐311G(d), 6‐311+G(d), and 6‐311++G(d,p) basis sets. Also, the molecular hardness (η) and electronegativity (χ) parameters have been obtained using molecular frontier orbital energies. The <α>, Δα, μ, β, HOMO, LUMO energies, η and χ parameters have been investigated as dependence on the choice of method and basis set. The variation graphics of <α>, Δα, μ, β, η, and χ parameters using HF and B3LYP methods with different basis sets are presented. We have examined the frontier molecular orbital pictures of 5a – f , 8a – f , and 9a – f using B3LYP/6‐31++G(d,p) level. The 5a – f , 8a – f , and 9a – f display significant linear, second‐order molecular nonlinearity, and molecular parameters and provide the basis for future design of efficient nonlinear optical materials having the 1,3,4‐oxadiazole core. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Synthesis and characterization of thieno[3,2‐b]thiophene‐isoindigo‐based copolymers as electron donor and hole transport materials for bulk‐heterojunction polymer solar cells

A novel class of thieno[3,2‐b]thiophene (TT) and isoindigo based copolymers were synthesized and evaluated as electron donor and hole transport materials in bulk‐heterojunction polymer solar cells (BHJ PSCs). These π‐conjugated donor‐acceptor polymers were derived from fused TT and isoindigo structures bridged by thiophene units. The band‐gaps and the highest occupied molecular orbital (HOMO) levels of the polymers were tuned using different conjugating lengths of thiophene units on the main chains, providing band‐gaps from 1.55 to 1.91 eV and HOMO levels from ?5.34 to ?5.71 eV, respectively. The corresponding lowest unoccupied molecular orbital (LUMO) levels were appropriately adjusted with the isoindigo units. Conventional BHJ PSCs (ITO/PEDOT:PSS/active layer/interlayer/Al) with an active layer composed of the polymer and PC₇₁BM were fabricated for evaluation. Power conversion efficiency from a low of 1.25% to a high of 4.69% were achieved with the best performing device provided by the D?π?A polymer with a relatively board absorption spectrum, high absorption coefficient, and more uniform blend morphology. These results demonstrate the potential of this class of thieno[3,2‐b]thiophene‐isoindigo‐based polymers as efficient electron donor and hole transport polymers for BHJ PSCs. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and photovoltaic properties of 2,6‐bis(2‐thienyl) benzobisazole and 4,8‐bis(thienyl)‐benzo[1,2‐B:4,5‐B′]dithiophene copolymers

In an effort to design efficient low‐cost polymers for use in organic photovoltaic cells the easily prepared donor–acceptor–donor triad of a either cis‐benzobisoxazole, trans‐benzobisoxazole or trans‐benzobisthiazole flanked by two thiophene rings was combined with the electron‐rich 4,8‐bis(5‐(2‐ethylhexyl)‐thien‐2‐yl)‐benzo[1,2‐b:4,5‐b′]dithiophene. The electrochemical, optical, morphological, charge transport, and photovoltaic properties of the resulting terpolymers were investigated. Although the polymers differed in the arrangement and/or nature of the chalcogens, they all had similar highest occupied molecular orbital energy levels (?5.2 to ?5.3 eV) and optical band gaps (2.1–2.2 eV). However, the lowest unoccupied molecular orbital energy levels ranged from ?3.1 to ?3.5 eV. When the polymers were used as electron donors in bulk heterojunction photovoltaic devices with PC₇₁BM ([6,6]‐phenyl C₇₁‐butyric acid methyl ester) as the acceptor, the trans‐benzobisoxazole polymer had the best performance with a power conversion efficiency of 2.8%. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 316–324     

Bandgap engineering of indenofluorene‐based conjugated copolymers with pendant donor‐π‐acceptor chromophores for photovoltaic applications

Three narrow‐band‐gap conjugated copolymers based on indenofluorene and triphenylamine with pendant donor‐π‐acceptor chromophores were successfully synthesized by post‐functionalization approach. All the polymers have good solubility in common solvents and excellent thermal stability. The photophysical properties, energy levels and band gaps of the polymers were well manipulated by introducing different acceptor groups onto the end of their conjugated side chains. By using different acceptor groups, the band gaps of the polymers were narrowed from 1.86 to 1.53 eV by lowering their lowest unoccupied molecular orbital levels, whereas their relatively deep highest occupied molecular orbital levels of approximately ?5.35 eV were maintained. Bulk‐heterojunction solar cells with these polymers as electron donors and (6,6)‐phenyl‐C₇₁‐butyric acid methyl ester as acceptor showed power conversion efficiencies as high as 3.1% and high open circuit voltages more than 0.88 eV. The relationships between the performance and film morphology, energy levels, charge mobilities were discussed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Luminescent copoly(aryl ether)s with new electron‐transporting bis(3‐(trifluoromethyl)phenyl)‐1,3,4‐oxadiazole or bis(3‐(trifluoromethyl)phenyl)‐4‐(4‐hexyloxyphenyl)‐4H‐1,2,4‐triazole segments

To investigate the effect of trifluoromethyl groups in enhancing electron affinity of aromatic oxadiazole and triazole chromophores, we prepared four new copoly(aryl ether)s ( P1 – P4 ) consisting of bis(3‐(trifluoromethyl) phenyl)‐1,3,4‐oxadiazole (ETO) or bis(3‐(trifluoromethyl)phenyl)‐4‐(4‐hexyloxyphenyl)‐4H‐1,2,4‐triazole (ETT) segments and hole‐transporting segments [2,5‐distyrylbenzene (HTB) or bis(styryl)fluorine (HTF)]. Molecular spectra (absorption and photoluminescence) and cyclic voltammetry were used to investigate their optical and electrochemical properties. The emissions of P1 – P4 are dominated by the hole‐transporting fluorophores with longer emissive wavelengths around 442–453 nm via efficient excitation energy transfer. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels of P1 – P4 , estimated from electrochemical data, are ?5.15, ?5.18, ?5.30, ?5.27, ?3.39, ?3.49, ?3.36, and ?3.48 eV, respectively. The LUMO levels of ETO and ETT segments are significantly reduced to ?3.39～?3.36 eV and ?3.48～?3.49 eV, respectively, as compared with ?2.45 eV of P5 containing a 2,5‐diphenyl‐1,3,4‐oxadiazole segment. Moreover, electron and hole affinity can be enhanced simultaneously by introducing isolated hole‐ and electron‐transporting segments in the backbone. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5900–5910, 2004     

Charge transmission through a molecular wire: the role of terminal sites for the current-voltage behavior

The current-voltage and the conductance-voltage characteristics are analyzed for a particular type of molecular wire embedded between two electrodes. The wire is characterized by internal molecular units where the lowest occupied molecular orbital (LUMO) levels are positioned much above the Fermi energy of the electrodes, as well as above the LUMO levels of the terminal wire units. The latter act as specific intermediate donor and acceptor sites which in turn control the current formation via the superexchange and sequential electron transfer mechanisms. According to the chosen wire structure, intramolecular multiphonon processes may block the superexchange component of the interelectrode current, resulting in a negative differential resistance of the molecular wire. A pronounced current rectification appears if (i) the superexchange component dominates the electron transfer between the terminal sites and if (ii) the multiphonon suppression of distant superexchange charge hopping events between those sites is nonsymmetric.