Immunofluorescent Labeling of Human HepG2 Cells with CdTe Quantum Dot Probe Conjugated with Anti-pan CK MAb

A relatively sensitive, specific, and photostable method for the detection of cytokeratin of cancer cells via conjugation with cadmium telluride quantum dots(CdTe QDs) was described. Water soluble CdTe QDs were conjugated to anti-pan-cytokeratin(CK) monoclonal antibody(MAb) through coupling reagent [1-ethyl-3-(3-dimethyla- mino propyl)carbodiimide, EDC] and the conjugates were purified by dialysis. The expression of pan CK protein in HepG2 cells was observed by immunocytochemistry and direct immunofluoresce...     

Tuning Optical Properties of Si Quantum Dots by π‐Conjugated Capping Molecules

The absorption and photoluminescence (PL) properties of silicon quantum dots (QDs) are greatly influenced by their size and surface chemistry. Herein, we examined the optical properties of three Si QDs with increasing σ–π conjugation length: octyl‐, (trimethylsilyl)vinyl‐, and 2‐phenylvinyl‐capped Si QDs. The PL photon energy obtained from as‐prepared samples decreased by 0.1–0.3 eV, while the PL excitation (PLE) extended from 360 nm (octyl‐capped Si QDs) to 400 nm (2‐phenylvinyl‐capped Si QDs). A vibrational PL feature was observed in all samples with an energy separation of about 0.192±0.013 eV, which was explained based on electron–phonon coupling. After soft oxidization through drying, all samples showed blue PL with maxima at approximately 410 nm. A similar high‐energy peak was observed with the bare Si QD sample. The changes in the optical properties of Si QDs were mainly explained by the formation of additional states arising from the strong σ–π conjugation and QD oxidation.     

Silica-coated CdTe quantum dots functionalized with thiols for bioconjugation to IgG proteins

Quantum dots (QDs) have been increasingly used in biolabeling recently as their advantages over molecular fluorophores have become clear. For bioapplications QDs must be water-soluble and buffer stable, making their synthesis challenging and time-consuming. A simple aqueous synthesis of silica-capped, highly fluorescent CdTe quantum dots has been developed. CdTe QDs are advantageous as the emission can be tuned to the near-infrared where tissue absorption is at a minimum, while the silica shell can prevent the leakage of toxic Cd(2+) and provide a surface for easy conjugation to biomolecules such as proteins. The presence of a silica shell of 2-5 nm in thickness has been confirmed by transmission electron microscopy and atomic force microscopy measurements. Photoluminescence studies show that the silica shell results in greatly increased photostability in Tris-borate-ethylenediaminetetraacetate and phosphate-buffered saline buffers. To further improve their biocompatibility, the silica-capped QDs have been functionalized with poly(ethylene glycol) and thiol-terminated biolinkers. Through the use of these linkers, antibody proteins were successfully conjugated as confirmed by agarose gel electrophoresis. Streptavidin-maleimide and biotinylated polystyrene microbeads confirmed the bioactivity and conjugation specificity of the thiolated QDs. These functionalized, silica-capped QDs are ideal labels, easily synthesized, robust, safe, and readily conjugated to biomolecules while maintaining bioactivity. They are potentially useful for a number of applications in biolabeling and imaging.     

Avidin: a natural bridge for quantum dot-antibody conjugates

We describe the preparation and characterization of bioinorganic conjugates in which luminescent semiconductor CdSe-ZnS core-shell nanocrystal quantum dots (QDs) were coupled to antibodies through the use of an avidin bridge adsorbed to the nanocrystal surface via electrostatic self-assembly. Avidin, a highly positively charged protein, was found to adsorb tightly to QDs modified with dihydrolipoic acid, which gives their surface a homogeneous negative charge. QD conjugation to biotinylated antibodies subsequently is readily achieved. Fluoroimmunoassays utilizing these antibody conjugated QDs were successful in the detection of protein toxins (staphylococcal enterotoxin B, cholera toxin). QD-antibody conjugates formed in such a facile manner permit their use as a common immuno reagent, and in the development of multianalyte detection.     

Preparation of highly fluorescent magnetic nanoparticles for analytes-enrichment and subsequent biodetection

Bifunctional nanoparticles with highly fluorescence and decent magnetic properties have been widely used in biomedical application. In this study, highly fluorescent magnetic nanoparticles (FMNPs) with uniform size of ca. 40 nm are prepared by encapsulation of both magnetic nanoparticles (MNPs) and shell/core quantum dots (QDs) with well-designed shell structure/compositions into silica matrix via a one-pot reverse microemulsion approach. The spectral analysis shows that the FMNPs hold high fluorescent quantum yield (QY). The QYs and saturation magnetization of the FMNPs can be regulated by varying the ratio of the encapsulated QDs to MNPs. Moreover, the surface of the FMNPs can be modified to offer chemical groups for antibody conjugation for following use in target-enrichment and subsequent fluorescent detection. The in vitro immunofluorescence assay and flow cytometric analysis indicate that the bifunctional FMNPs-antibody bioconjugates are capable of target-enrichment, magnetic separation and can also be used as alternative fluorescent probes on flow cytometry for biodetection.     

Spatiotemporal multicolor labeling of individual cells using peptide-functionalized quantum dots and mixed delivery techniques

Multicolor fluorescent labeling of both intra- and extracellular structures is a powerful technique for simultaneous monitoring of multiple complex biochemical processes. This approach remains extremely challenging, however, as it often necessitates the combinatorial use of numerous targeting probes (e.g., antibodies), multistep bioconjugation chemistries, different delivery strategies (e.g., electroporation or transfection reagents), cellular fixation coupled with membrane permeabilization, and complex spectral deconvolution. Here, we present a nanoparticle-based fluorescence labeling strategy for the multicolor labeling of distinct subcellular compartments within live cells without the need for antibody conjugation or cellular fixation/permeabilization. This multipronged approach incorporates an array of delivery strategies, which localize semiconductor quantum dots (QDs) to various subcellular structures. QD uptake is implemented in a spaciotemporal manner by staggering the delivery of QD-peptide composites and exploiting various innate (peptide-mediated endocytosis, peptide-membrane interaction, polymer-based transfection) along with physical (microinjection) cellular delivery modalities to live cells growing in culture over a 4 day period. Imaging of the different intracellular labels is simplified by the unique photophysical characteristics of the QDs in combination with Fo?rster resonance energy transfer sensitization, which allow for multiple spectral windows to be accessed with one excitation wavelength. Using this overall approach, QDs were targeted to both early and late endosomes, the cellular cytosol, and the plasma membrane in live cells, ultimately allowing for simultaneous five-color fluorescent imaging.     

Fabrication of quantum dots-encoded microbeads with a simple capillary fluidic device and their application for biomolecule detection

Monodispersed quantum dots (QDs)-encoded polymer microbeads were generated using a simple capillary fluidic device (CFD). The polymer and QDs solution was emulsified into monodispersed microdroplets by the CFD and obtained droplets were solidified via solvent evaporation. Polymer microbeads can be fabricated in a range of different sizes through changing the flow rates of the two immiscible phases, and have a highly narrow size distribution and uniform shape. QDs-encoding capacity of the microbeads was investigated through adjusting the concentrations and ratios of QDs in the polymer solution. Mono-color encoded microbeads with five intensities and a dual-color QDs-encoded 5×5 microbeads array were obtained, and the spectral profiles of the microbeads were examined by a fluorescent microscope coupled with a spectral imaging system. QDs-tagged microbeads prepared with this method were more stable than the porous beads swollen with QDs in the buffer with various pH and crosslinking chemicals. Finally, the application of such microbeads for biomolecule detection was demonstrated by conjugation of rabbit IgG molecules on the surface of the microbeads via carboxyl groups, which were then detected by fluorophores-labeled goat-anti-rabbit IgG antibodies.     

Studies on bioconjugation of quantum dots using capillary electrophoresis and fluorescence correlation spectroscopy

In this paper, we systematically investigated the conjugation of quantum dots (QDs) with certain biomolecules using capillary electrophoresis (CE) and fluorescence correlation spectroscopy (FCS) methods. Commercial QDs and aqueous-synthesized QDs in our lab were used as labeling probes, certain bio-macromolecules, such as proteins, antibodies, and enzymes, were used as mode samples, and 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC) and N-hydroxysulfo-succinimide (Sulfo-NHS) were used as linking reagents. We studied the effects of certain factors such as the isoelectric points (pIs) of bio-macromolecules and buffer pH on the bioconjugation of QDs, and found that the pIs of bio-macromolecules played an important role in the conjugation reaction. By the optimization of the buffer pH some proteins with different pIs were efficiently conjugated with QDs using EDC and Sulfo-NHS as linking agents. Furthermore, we on-line investigated the kinetic process of QDs-bioconjugation by FCS and found that the conjugation reaction of QDs with protein was rapid and the reaction process almost completed within 10 min. We also observed that QDs conjugated with proteins were stable for at least 5 days in phosphate buffer. Our work described here will be very helpful for the improvement of the QDs conjugation efficiency in bioapplications.     

Immunoassay by capillary electrophoresis with quantum dots

The application of quantum dots in capillary electrophoresis immunoassay was studied for the first time. Quantum dots were conjugated with antibody and subsequently tested by electrophoretic separation of free antibody and antibody-antigen complex. Antibody was fluorescently labeled by quantum dots via conjugation procedures and its electrophoretic characteristics were effectively modified due to the attachment of quantum dots. The determination of human IgM by direct CE based immunoassay could be easily achieved by simply changing the pH value of separation buffer. Polymer additive influenced the separation too but the effect was not as significant as buffer pH adjustment. Satisfactory separation of complex from free antibody could be achieved with 20mM sodium tetraborate as separation buffer, at pH 9.8. The immunoassay application of quantum dots in CE offers considerable advantages and can be readily applied to other large bio-molecules.     

NHS Mediated CdTe Quantum Dots/Albumin Conjugates and Labeling C. Elegans

Introduction Incellbiology,fluorescenceprobesarewidely used.Organicdyes,mostcommonlyusedinfluores cenceprobes,sufferfromfastphotobleachingandbroad overlappingemissionlinessothattheyarelimitedin theirapplications.Progressinsemiconductornanocrys tals,orquan…     

Self-assembled luminescent CdSe-ZnS quantum dot bioconjugates prepared using engineered poly-histidine terminated proteins

We report a simple and versatile approach for the conjugation of luminescent CdSe-ZnS core-shell quantum dots (QDs) to proteins through coordination of engineered C-terminal oligohistidine sequences. Several histidine tail containing proteins were self-assembled onto the QD surface using this method. A recombinant antibody specific for the high explosive 2,4,6-trinitrotoluene (TNT) was conjugated to QDs through a carboxy terminal histidine tail and the bioconjugate used to detect TNT by competitive immunoassay. TNT was detected over the range of 10 μg/ml down to 41 ng/ml using the scFv conjugated to QDs. These results open up the possibility to conjugate luminescent QDs to a whole range of proteins to form QD bioconjugates that can be effectively used in bio-oriented applications, such as sensing, imaging, immunoassay and other diagnostics.     

Quenching of photoluminescence in conjugates of quantum dots and single-walled carbon nanotube

Development of quantum dot (QD) based device components requires controlled integration of QDs into different photonic and electronic materials. In this regard, introduction of methods for regular arrangement of QDs and investigation of properties of QD-based assemblies are important. In the current work we report (1) controlled conjugation of CdSe-ZnS QDs to sidewall-functionalized single-walled carbon nanotube (SWCNT) templates (2) and the effect of conjugation of QDs to SWCNT on the photoluminescence (PL) properties of QDs. We identified that PL intensity and lifetime of QDs are considerably reduced after conjugation to SWCNT. The origin of the quenching of the PL intensity and lifetime was discussed in terms of F?rster resonance energy transfer (FRET). FRET involves nonradiative transfer of energy from a photoexcited QD (energy donor) to a nearby SWCNT (energy acceptor) in the ground state. This was examined by varying the density of QDs on SWCNT and conjugating smaller and bigger QDs to the same SWCNT. We estimated the FRET efficiency in QD-SWCNT conjugates from the quenching of the PL intensity and lifetime and identified that FRET is independent of the density and type of QDs on SWCNT but inherent to QD-SWCNT conjugates.     

水溶性量子点标记狂犬病P蛋白单克隆抗体的研究

利用共价偶联的方式,在水溶性缩合剂1-乙基-(3-二甲基氨基丙基)碳二亚胺盐酸盐(EDC)和N-羟基硫代琥珀酰亚胺(Sulfo-NHS)促进作用下,将400 μL的2 g/L狂犬病P蛋白抗体与适量的聚丙烯酸修饰后的水溶性硫脲修饰ZnO掺Cd量子点进行共价偶联反应,经磷酸盐缓冲液(PBS,0.01 mol/L,pH 7.4)透析纯化得到目标偶联物,采用荧光发射光谱、生物质谱、酶联免疫法等对偶联物进行表征.结果表明:偶联后的量子点荧光最大发射波长红移了10 nm,荧光强度随着狂犬病P蛋白抗原浓度的增加而逐渐增强;量子点标记狂犬病P蛋白抗体后的分子离子峰在m/z 67580处,比狂犬病P蛋白抗体分子离子峰增大了1453.由此证实狂犬病P蛋白抗体成功偶联到水溶性量子点上,且结构未受破坏.     

Multifunctional compact zwitterionic ligands for preparing robust biocompatible semiconductor quantum dots and gold nanoparticles

We describe the synthesis of a series of four different ligands which are used to prepare hydrophilic, biocompatible luminescent quantum dots (QDs) and gold nanoparticles (AuNPs). Overall, the ligands are designed to be compact while still imparting a zwitterionic character to the NPs. Ligands are synthesized appended to a bidentate dihydrolipoic acid- (DHLA) anchor group, allowing for high-affinity NP attachment, and simultaneously incorporate tertiary amines along with carboxyl and/or hydroxyl groups. These are placed in close proximity within the ligand structure and their capacity for joint ionization imparts the requisite zwitterionic nature to the nanocrystal. QDs functionalized with the four different compact ligands were subjected to extensive physical characterization including surface charge, wettability, hydrodynamic size, and tolerance to a wide pH range or high salt concentration over time. The utility of the compact ligand coated QDs was further examined by testing of direct conjugation to polyhistidine-appended protein and peptides, aqueous covalent-coupling chemistry, and the ability to engage in F?rster resonance energy transfer (FRET). Conjugating cell penetrating peptides to the compact ligand coated QD series facilitated their rapid and efficient cellular uptake, while subsequent cytotoxicity tests showed no apparent decreases in cell viability. In vivo biocompatibility was also demonstrated by microinjecting the compact ligand coated QDs into cells and monitoring their stability over time. Inherent benefits of the ligand design could be extended beyond QDs as AuNPs functionalized with the same compact ligand series showed similar colloidal properties. The strong potential of these ligands to expand NP capabilities in many biological applications is highlighted.     

Enhancement of sensitivity and specificity of the fluoroimmunoassay of Hepatitis B virus surface antigen through “flexible” coupling between quantum dots and antibody

Quantum dots (QDs) are widely used in the immune detection. Yet, the sensitivity and specificity of the immune detection are not satisfactory because the binding sites of QDs onto antibody (Ab) are often arbitrary and the influence of the large surface electronic potential energy of QDs on the directly conjugated Ab is nonnegligible. In this work, we provide a “flexible” coupling method, in which protein G (PG) is selected as the flexible bridge between the QDs and the Hepatitis B virus surface antibody (HBsAb), to improve the sensitivity and specificity of the fluoroimmunoassay compared to the directly covalent conjugation. Successful coupling of the HBsAb to our highly luminescent CdTe/CdS core/shell QDs is proven with Gel electrophoresis and atomic force microscopy (AFM). The assay results, based on the microelisa well plate as matrix to immobilize the sandwich structure, show that both sensitivity and specificity can be improved greatly through the flexible coupled QDs-PG-Ab conjugates.     

Development of a biosensor for human blood: new routes to body fluid identification

The identification of human blood at a crime scene can provide crucial information to an investigation whilst also providing a source of nuclear material which can be targeted for DNA profiling. Here, we report on the development of an immunofluorescent biosensor for the identification of human blood which has the potential to overcome the drawbacks of the current body fluid identification techniques. An antibody (Ab) raised against human erythrocytes was conjugated to fluorescent semiconductor quantum dots (QDs) by sulfhydryl chemistry. The conjugation was verified by agarose gel electrophoresis and immunohistochemistry. Incubation of liquid blood samples with the conjugated nanocrystals was shown to quench the fluorescence emission spectra in a concentration-dependent manner. A different effect was observed with unconjugated QDs incubated in blood. Full profiles were obtained from blood samples previously treated with the Ab-QDs, demonstrating that the method does not interfere with DNA profiling. To our knowledge, this is the first example of a hybrid Ab-QD sensor that has the potential to be employed for the identification of human blood. The results of this study are expected to open up a new research direction in the field of body fluid detection.     

Highly efficient size separation of CdTe quantum dots by capillary gel electrophoresis using polymer solution as sieving medium

In this paper, we present a new method for highly efficient size separation of water-soluble CdTe quantum dots (QDs) based on CGE using polymer solution as sieving medium. CdTe QDs were synthesized in aqueous phase by a chemical route with mercaptopropionic acid as a ligand. In the alkaline solution, CdTe QDs possess negative charges and migrate to the anode in the electric field. In linear polyacrylamide sieving medium, the migration time of CdTe QDs was increased with the size of CdTe QDs. The effects of some factors, such as types, concentrations, and pH of sieving media, on the separation of CdTe QDs were investigated systematically. Highly efficient separation of CdTe QDs was obtained in linear polyacrylamide sieving medium, and collection of fractions was automatically accomplished by CGE technique. Our preliminary results show that CGE technique is an efficient tool for characterization and size-dependent separation of water-soluble nanoparticles. In addition, the fraction collection in CGE may be useful in certain special applications such as fabrication of nanodevices in the future.     

A highly efficient capillary electrophoresis-based method for size determination of water-soluble CdSe/ZnS core-shell quantum dots

This paper describes a highly efficient method for size determination of water-soluble CdSe/ZnS core-shell quantum dots (QDs) by capillary electrophoresis (CE) using polymer additive as sieving medium. The influence of some factors, such as kinds and concentrations of the sieving medium, pH, concentrations of the background electrolyte (BGE) and applied voltage, on the separation of QDs was investigated. Under the optimal separation conditions, four different sized QDs were successfully separated, and the relative standard deviation (RSD) of the migration times for these QDs was below 1.013%. In addition, an equation was fit by taking into account the correlation existing between the electrophoretic mobilities and the sizes of a set of QDs. The feasibility of this equation to measure the sizes of other QDs was confirmed by comparison with the sizes obtained by transmission electron microscopy (TEM) experiment. This work offers a novel method for size determination of QDs, and provides an important reference on the study of QDs based on CE.     

QD-antibody conjugates via carbodiimide-mediated coupling: a detailed study of the variables involved and a possible new mechanism for the coupling reaction under basic aqueous conditions

A detailed study into the optimization of carbodiimide-mediated coupling of antibodies (Ab) and quantum dots (QD) for use in cellular imaging has been undertaken. This involved the grafting of commercially available carboxyl-modified QDs (Evident Technologies "Lake Placid Blue" Evitag and eBioscience's eflour nanocrystals) with anti-Cdc8 Abs to produce conjugates with specific affinity for fission yeast tropomyosin Cdc8 protein. The water-soluble carbodiimide 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) was used to activate the QDs prior to their incubation with antibody, and a range of QD-carboxyl/EDC/Ab mole ratios were used in the experiments in attempts to optimize fluorescence and bioaffinity of the conjugate products (EDC to QD-carboxyl-600 nmol/15 pmol to 0.12 nmol/15 pmol and QD to Ab 120 pmol/24 pmol to 120 pmol/1.2 pmol). It was observed that a specific "optimum" ratio of the three reactants was required to produce the most fluorescent and biologically active product and that it was generated at alkaline pH 10.8. Increasing the ratio of Ab to QD produced conjugate which was less fluorescent while reducing the ratio of EDC to QD in the activation step led to increased fluorescence of product. Conjugates were tested for their possession of antibody by measurement of their absorption at OD(280 nm) and for their fluorescence by assay λ(max(em)) at 495 nm. A quantitative assay of the bioactivity of the conjugates was developed whereby a standardized amount of Cdc8 antigen was spotted onto nylon membranes and reacted with products from conjugation reactions in a sandwich-type colormetric assay The "best" conjugate was used in intracellular imaging of yeast Cdc8 protein and produced brighter, higher definition images of fixed yeast cell actin structure than a fluorescein-Ab conjugate routinely produced in our laboratory. The QD-Ab conjugate was also significantly more resistant to photobleaching than the fluorescein-Ab conjugate. Results from other experiments involving EDC, the water-soluble carbodiimide 1-cyclohexyl-3-(2-morpholinoethyl)carbodiimide metho-p-toluenesulphonate (CMC), and EDC.HCl have suggested a new reaction mechanism for EDC coupling under basic aqueous conditions. In summary, a robust understanding of commercial QD-COOH surface chemistry and the variables involved in the materials' efficient conjugation with a bioligand using carbidiimide has been obtained along with an optimized approach for Ab-QD conjugate production. A novel assay has been developed for bioassay of QD-Ab conjugates and a new mechanism for EDC coupling under basic aqueous conditions is proposed.     

Triggered aggregation of PbS nanocrystal dispersions; towards directing the morphology of hybrid polymer films using a removable bilinker ligand

Hybrid polymer films consist of quantum dots (QDs) dispersed in a polymer matrix. A key fundamental challenge that is hindering their optimisation in optoelectronic devices such as hybrid solar cells is overcoming uncontrolled aggregation of the QDs. In an effort to direct aggregation, and trigger self-assembly, we added a bilinker ligand (1,2-ethanedithiol) to dispersed PbS QDs in polymer solutions prior to film deposition by spin casting. Turbidity studies of the PbS QD/1,2-ethanedithiol dispersions enabled a relationship to be established between the extent of 1,2-ethanedithiol-triggered QD aggregation and the nominal fractional coverage of the QDs by 1,2-ethanedithiol. The extent of aggregation (and self-assembly) increased with nominal fraction coverage. Above a value of about 1.0 QD aggregation increased substantially. TEM images showed that at low 1,2-ethanedithiol concentrations triggered assembly of network-like QD structures occurred. At high 1,2-ethanedithiol concentrations the QDs self-assembled into more-ordered micrometre-sized crystals. The results suggest that 1,2-ethanedithiol decreases the inter-QD separation in dispersion as a result of rapid ligand exchange and this process results in QD aggregation as well as self-assembly. The assembled QD structures were successfully trapped within polymer films by spin casting of PbS QD/1,2-ethanedithiol dispersions containing added polystyrene or polytriarylamine.