Selenium bioaccessibility assessment in selenized yeast after "in vitro" gastrointestinal digestion using two-dimensional chromatography and mass spectrometry

In order to investigate the potentially bioavailable selenium-containing compounds in the selenized yeast candidate reference material SEAS 6, a two-dimensional (size exclusion-reversed phase) chromatography approach has been worked out. Electrospray tandem mass spectrometry (ESI Q-TOF MS) was then used for off-line identification of low molecular weigh selenocompounds generated during the gastrointestinal digestion. Selenomethionine (SeMet) was the major compound identified in the gastrointestinal extract while SeMet selenoxide was its main degradation product formed after medium and long-term sample storage, respectively. Total Se and SeMet were quantified in both the soluble extracts and the residue. Results showed that 89+/-3% of total Se was extracted after gastrointestinal digestion, but only 34+/-1% was surprisingly quantified as free SeMet. The rest of Se was present as many other low, medium and high molecular weight Se-species, which could be detected and further characterized by using the two-dimensional chromatography approach proposed here. Interestingly, most of Se-species seemed to be Se-peptides unspecifically produced by the gastrointestinal juice. These results show for the first time that while the efficiency of human gastrointestinal digestion to dissolve Se-containing proteins present in yeast may be high, its efficiency to convert them into free SeMet is much lower. Se-species present in the insoluble residue (not assimilated by the organism), accounting for 11+/-1% of the total Se in selenized yeast, were also studied. After treatment with SDS (denaturing agent) only 13+/-2% of this "insoluble" Se was solubilized, indicating that it was mainly non-protein bound and likely associated to other insoluble matrix components.     

Identification of selenium-containing proteins in selenium-rich yeast aqueous extract by 2D gel electrophoresis, nanoHPLC-ICP MS and nanoHPLC-ESI MS/MS

An approach based on the consecutive use of nanoHPLC-ICP collision cell MS and nanoHPLC-electrospray MS was proposed for the analysis of water-soluble selenium-containing proteins in selenium-rich yeast after their separation by 2D gel electrophoresis (GE). An ultrasonic probe was employed for fast protein extraction avoiding sample heating and thus reducing the risk of protein degradation. The efficiency of different extraction steps were critically evaluated by total selenium analysis and size-exclusion chromatography (SEC)-ICP MS. Prior to electrophoresis proteins were purified by acetone precipitation. The protein-containing spots from 2D GE were excised and digested with trypsin. The digests obtained were analyzed by nanoHPLC-ICP MS in order to check for the presence of selenium-containing peptides; this allowed the detection of target proteins for further analyses (two out of five spots). The subsequent analyses of the selected digests by nanoHPLC-ES MS/MS allowed the attribution of amino acid sequences to peaks detected by ICP MS revealing the presence of two selenium-containing proteins: SIP 18 and HSP 12.     

富硒螺旋藻光谱特性及其含硒蛋白质组分析

以富硒螺旋藻( Selenium enriched spirulina platensis, Se-SP)为材料,采用红外、紫外-可见吸收光谱分析Se-SP的光谱特征,并利用二维电泳技术(Two-dimensional electrophoresis,2DE)分离、飞行时间质谱(Matrix assisted laser desorption ionization time of flight, MALDI-TOF)鉴定和电感耦合等离子体质谱( Inductively coupled plasma mass spectrometry, ICP-MS)检测硒含量,对Se-SP蛋白质组及其含硒蛋白质分布进行初步鉴定和分析。结果显示,硒对螺旋藻蛋白质组中多种蛋白质表达有一定影响,观察到对捕光色素蛋白如藻蓝蛋白( Phycocya-nin, PC)、别藻蓝蛋白( Allophycocyanin , APC)和 Robisco大亚基及超氧化物歧化酶( Superoxide Dismutase, SOD)等蛋白质具有明显上调作用。硒在Se-SP蛋白质组中存在较为普遍,但分布相对集中在pH 4~7、分子质量14.4~43 kDa的蛋白质中。硒在藻体特定蛋白质中的存在形式还有待深入研究和鉴定。     

Detection of selenocompounds in a tryptic digest of yeast selenoprotein by MALDI time-of-flight MS prior to their structural analysis by electrospray ionization triple quadrupole MS

MALDI-TOFMS was proposed as a key technique to a novel generic approach for the speciation analysis of selenium in yeast supplements. Owing to a lower detection limit and superior matrix tolerance to electrospray MS it allowed a successful detection of selenocompounds in samples for which electrospray MS had failed. The analytical approach developed was applied to the identification of a previously unreported selenopentapeptide (m/z 596) in the tryptic digest of a water-soluble selenoprotein fraction isolated by size-exclusion chromatography. The information on the mass of the protonated molecular ion obtained from MALDI allowed the optimization of the conditions for collision induced dissociation MS using a triple quadrupole spectrometer that enabled the determination of the amino acid sequence SeMet-Asn-Ala-Gly-Arg of the selenopeptide.     

Fractionation of soluble selenium compounds from fish using size-exclusion chromatography with on-line detection by inductively coupled plasma mass spectrometry

Fish accumulate significant amounts of selenium and are an important dietary source of this element. Some studies have however indicated a low bioavailability of the selenium from fish. Since little is known of the selenium forms in fish, we have studied soluble selenium compounds in fish species, and compared different techniques for fractionation of selenocompounds (size-exclusion chromatography, ultrafiltration, and precipitation with trichloroacetic acid). The size-exclusion column (Superdex 200 HR 10/30) was coupled on-line to inductively coupled plasma mass spectrometry (ICP-MS). The limit of detection was 0.20 microgram l-1 and the selenium response was linear in the investigated concentration range of 0-20 micrograms l-1 (r2 = 0.98). For plaice 47% of the selenium was extractable while the extraction efficiency for cod was 23%. The fish extracts were injected onto the column four times each and the variation in the quantitative data for different selenium-containing fractions between the runs was small (RSD < 10%). The recovery of selenium in the chromatographic step was about 70%, indicating some interaction between the fish extracts and the column material. Ultrafiltration using a membrane with a cut-off at M(r) 10,000 gave results similar to the size-exclusion fractionation, for cod about 20% of the soluble selenium had a M(r) < 10,000 and the corresponding value for plaice was 69%. Removal of high-molecular-weight compounds from the sample by trichloroacetic acid precipitation showed a similar proportion of low-molecular-weight compounds for plaice (77%), while the obtained value for cod was higher (38%) compared with the other techniques.     

Two-dimensional gel electrophoresis of selenized yeast and autoradiography of 75Se-containing proteins

Two-dimensional high-resolution gel electrophoresis (2DE) has been applied to the fractionation of 75Se-containing proteins in yeast, grown in 75Se-containing medium, and autoradiography was used for detection of the 75Se-containing proteins. Gel filtration and ultrafiltration were used to check whether the selenium side-chains were stable in the presence of the chemicals used for lysis and 2DE. The mass distribution of the selenium-containing proteins was estimated by use of gel filtration and the results were compared with the distribution obtained by 2DE. A 2DE map of selenium-containing proteins in yeast is presented, and compared with a total protein map of yeast.     

On-line focused microwave digestion-hydride generation of inorganic and organic selenium: Total determination and inorganic selenium speciation by atomic absorption spectrometry

An on-line FIA pretreatment with HBr/KBrO₃, assisted by on-line focused microwave-induced digestion, has been coupled with hydride generation-atomic absorption spectrometry (HG-AAS) for final detection for total selenium determination. This total selenium determination is virtually independent of the different Se species investigated (selenite, selenate, selenomethionine, selenoethionine and selenocystine). Detection limits of 0.8 μg l⁻¹ of Se can be achieved by AAS with precisions better than 5%. This continuous flow system for selenium determination allows a high sample throughput (about 30 samples h⁻¹ can be analyzed) in which high automation can be achieved and constitutes a convenient real-time continuous detector for the different selenocompounds tested. Direct non-chromatographic speciation of inorganic selenium (selenite and selenate in their mixtures) is demonstrated by simple on-off operation of the focused microwaves connected in the flow system.

Validation of this simple on-line FIA system has been carried out by analyzing total Se recovered from spiked tap waters and by speciating mixtures of Se(IV) and Se(VI) spiked to the same samples. The fast conversion of Se compounds into volatile selenium could be considered as a sort of specific “general” detector for Se compounds which can be extremely useful for Se speciation by hybrid chromatographic techniques.     

Preparative separation of immunoglobulins from bovine colostrum by continuous divergent-flow electrophoresis

Immunoglobulins in bovine colostrum were separated and fractionated from other proteins using the method and instrumentation developed in our laboratory. The proposed separation was based on bidirectional isotachophoresis/moving boundary electrophoresis with electrofocusing of the analytes in a pH gradient from 3.9 to 10.1. The preparative instrumentation included the trapezoidal non-woven fabric that served as separation space with divergent continuous flow. The defatted and casein precipitate-free colostrum supernatant was loaded directly into the instrument without any additional colostrum pre-preparation. Immunoglobulin G was fractionated from other immune proteins such as bovine serum albumin, β-lactoglobulin, and α-lactalbumin, and was continuously collected in separated fractions over 3 h. The fractions were further processed, and isolated immunoglobulin G in the liquid fractions was confirmed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and by re-focusing in gel isoelectric focusing. Separated immunoglobulin G was detected in seven fractions by sodium dodecyl sulfate-polyacrylamide gel electrophoresis with a gradually decreased concentration in the fractions. Re-focusing of the proteins in the fractions by gel isoelectric focusing revealed multiple separated zones of immunoglobulin G with the isoelectric point values covering the range from 5.4 to 7.2. Each fraction contained distinct zones with gradually increased isoelectric point values and decreased concentrations from fraction to fraction.     

A metallomics approach discovers selenium-containing proteins in selenium-enriched soybean

Our previous study found that high-molecular-weight selenium (Se) species make up 82% of the total Se in the bean of Se-enriched soybean plants (Chan et al. 2010, Metallomics, 2(2): p. 147–153). The Se species have been commonly seen in other plants in addition to soybean, but their identities remain unresolved. The present study employs a multi-technique metallomics approach to characterize the proteins containing Se in the beans of Se-enriched soybean plants. Two main categories of proteins, maturation proteins and protease inhibitors, were found in Se-containing high-performance liquid chromatography (HPLC) fractions. The proteins were screened by two-dimensional HPLC-inductively coupled plasma mass spectrometry, size-exclusion chromatography, and anion-exchange chromatography, and the Se-containing fractions were then identified by peptide mapping using HPLC-Chip-electrospray ion trap mass spectrometry. Based on the belief that Se goes into proteins through non-specific incorporation, a new method was designed and applied for the Se-containing peptide identification. The Se-containing peptide KSDQSSSYDDDEYSKPCCDLCMCTRS, part of the sequence of protein Bowman–Birk proteinase isoinhibitor (Glycine max), was found in one of the Se-containing fractions. The nutritional value of the Se-containing proteins in Se-enriched soybeans will be an interesting topic for the future studies.     

Separation of proteins with a molecular mass difference of 2 kDa utilizing preparative double-inverted gradient polyacrylamide gel electrophoresis under nonreducing conditions: application to the isolation of 24 kDa human growth hormone

A method for separating proteins with a molecular mass difference of 2 kDa using SDS-PAGE under nonreducing conditions is presented. A sample mixture containing several human growth hormone (hGH) isoforms was initially separated on a weak anion-exchange column. Fractions rich in 24 kDa hGH as determined by analytical SDS-PAGE were pooled and further separated by cation-exchange chromatography. The fractions pooled from the cation-exchange chromatography contained two hGH isoforms with a 2 kDa molecular mass difference according to SDS-PAGE analysis, 22 and 24 kDa hGH. The 22 and 24 kDa hGH were separated using continuous-elution preparative double-inverted gradient PAGE (PDG-PAGE) under nonreducing conditions. The preparative electrophoresis gel was composed of three stacked tubular polyacrylamide matrices, a 4% stacking gel, a 13-18% linear gradient gel, and a 15-10% linear inverted gradient gel. Fractions containing purified 24 kDa hGH were pooled and Western blot analysis displayed immunoreactivity to antihGH antibodies. PDG-PAGE provides researchers with an electrophoretic technique to preparatively purify proteins under nonreducing conditions with molecular mass differences of 2 kDa.     

Detection of metals in proteins by means of polyacrylamide gel electrophoresis and laser ablation-inductively coupled plasma-mass spectrometry: application to selenium

The capabilities of laser ablation-inductively coupled plasma-mass spectrometry for the detection of trace elements in a gel after gel electrophoresis were systematically studied. Figures of merit, such as limit of detection, linearity, and repeatability, were evaluated for various elements (Li, V, Cr, Mn, Ni, Cu, Zn, As, Se, Mo, Pd, Ag, Cd, Pt, Tl, Pb). Two ablation strategies were followed: single hole drilling, relevant for ablation of spots after two-dimensional (2-D) separations, and ablation with translation, i.e., on a line, relevant for one-dimensional (1-D) separations. This technique was applied to the detection of selenoproteins in red blood cells extracts after a 1-D separation (sodium dodecyl sulfate-polyacrylamide gel electrophoresis) and the detection of selenium-containing proteins in yeast after 2-D electrophoresis (2-DE). The detection procedure was further improved by using the dynamic reaction cell technology, which allowed the removal of the Ar_2(+) interference and hence the use of the most abundant Se isotope, (80)Se. Reaction gases were compared (methane, carbon monoxide, ammonia, oxygen and the combination of argon (collision gas) and hydrogen (reaction gas)). In each instance, the reaction cell parameters were optimized in order to obtain the lowest detection limit for Se (as (80)Se(+), (82)Se(+) or (77)Se(+); and as (80)Se(16)O(+), (82)Se(16)O(+) or (77)Se(16)O(+) with O(2) as the reaction gas). Carbon monoxide was found to offer the best performance. The detection limit with the use of DRC and He as transport gas was 0.07 microg Se g(-1) gel with single hole drilling and 0.15 microg Se g(-1) gel for ablation with translation.     

HPLC-ICP-MS speciation of selenium in Se-cultivated Flammulina velutipes

Selenium is an essential micronutrient required at trace levels for human health, and dietary intake is the only source of selenium, which appears mainly in the form of selenocompounds. In this study, Flammulina velutipes was grown for 80 days in standard medium containing selenite, and the level of total selenium in the organism was then determined by inductively-coupled plasma mass spectrometry (ICP-MS). In Se-cultivated F. velutipes, selenium was mainly distributed in the water-soluble form and the content of soluble selenium-containing species in Se-cultivated F. velutipes was 47.10 mg kg⁻¹, accounted for 72.5% of the total selenium content. The water-soluble proteins in F. velutipes were extracted and precipitated by different ammonium sulfate saturation concentrations. Size-exclusion high performance liquid chromatography (SEC-HPLC) analysis of these proteins revealed the presence of at least six selenium-containing protein species, with molecular weights ranging from 9000 to 74,000 Da, Selenium-containing proteins represented about 7.0% of the total soluble selenium. The result of this study suggested that Se-cultivated F. velutipes could potentially be considered as a selenium supplement for human.     

Studies on the selenoproteome in the cultured cells of lung and trachea by gel electrophoretic techniques

In the present studies radiotracer techniques have been combined with biochemical separation procedures to investigate the selenium-containing proteins in the culture cells of the lung, trachea and their subcellular fractions. Subcellular separation of the lung and trachea tissues has been achieved by differential ultracentrifugation. The selenium-containing proteins in these compartments have been investigated by labeling of lung and trachea cultured cells in vitro with Se-75, gel electrophoretic separation of the proteins and autoradiographic detection of the tracer. The protein separation by gel electrophoresis using mono-dimensional (1D)- and two-dimensional (2D)-SDS-PAGE has been successfully applied for the selenium research. It has resulted in the detection of a large number of selenium-containing proteins. Two-dimensional gel electrophoresis (2-DE) was also helpful in the identification of the proteins of interest according to their molecular mass and isoelectric point. In this way more than 30 selenium-containing proteins could be distinguished in the lung and trachea samples. Some of them such as Gpx1, Trx1, SelP, SelT and Sel15 could be identified by means of immunoassays, their molecular weight and pI values and localized in the cellular compartments.     

Direct determination of selenoproteins in polyvinylidene difluoride membranes by electrothermal atomic absorption spectrometry

A method for the direct determination of selenoproteins in plastic membranes after protein separation by gel electrophoresis was developed. Quantification was based on the determination of the selenium content of the proteins by electrothermal atomic absorption spectrometry (ET-AAS) after manual introduction of membrane pieces into the graphite furnace. The proteins were separated by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) and subsequently transferred to a polyvinylidene difluoride (PVDF) membrane by semi-dry electroblotting. After staining the membrane, the protein bands were excised and chemical modifier was added on top of the excised membrane prior to atomic absorption measurement. Acceptable linearity was achieved in the range 2-10 ng Se, corresponding to selenium concentrations close to 1 mg/L, when aqueous solutions of selenomethionine standard as well as selenoprotein standard were applied to the membrane. A characteristic mass of 54 +/- 4 pg/0.0044 s was obtained for the selenoprotein standard. Protein transfer from polyacrylamide gel to the membrane was quantitative and no interferences were introduced. The method was used for identification of selenoprotein P after enrichment of the protein from human plasma.     

Selenomethionine content of candidate reference materials.

Selenium has been identified as an antioxidant of importance in the diet. Accurate determination of its chemical forms depends on the availability of suitable reference materials (RMs). Two candidate reference materials for determination of selenomethionine (Semet) in food-related materials, a standard wheat gluten sample (NIST RM 8418 Wheat Gluten) and a commercial selenium enriched yeast, have been examined by use of a gas chromatography-isotope dilution mass spectrometry (IDMS) procedure, after treatment of the matrix with 0.1 mol L(-1) hydrochloric acid containing stannous chloride, addition of CNBr, and extraction with chloroform. This procedure results in cleavage of the CH3Se group to form volatile CH3SeCN. Addition of isotopically enriched 74Semet to an analytical sample enables estimation of the naturally occurring protein-bound 80Semet by IDMS without a protein-digestion process. We found that the Wheat Gluten RM contains a significant amount of Semet as a portion of its assigned value of 2.58 microg Se(total g(-1). Commercial selenium yeast tablets are labeled as containing an elevated level of "organic selenium", usually as Semet. The sample we investigated contained 210 microg Se(total) g(-1) sample as determined separately by IDMS, measuring elemental selenium after digestion. 73% of this total (153 +/- 21 microg Se(semet) g(-1); n = 23) was present as Semet. Thus, these two materials contain significant amounts of their total selenium content as Semet and would be good candidates for further study and characterization as reference materials for determining this important food component. The CNBr reaction used will also enable the determination of Se-(methyl)selenocysteine, the biological role of which is of recent interest. In addition to matrix RMs for Semet, it is important to have standard materials of the pure substance. We have examined a sample of a candidate standard material of selenomethionine being prepared by the USP. It was confirmed that this material is pure selenomethionine.     

Proteomics of rat liver Golgi complex: minor proteins are identified through sequential fractionation

The discovery of novel proteins resident to the Golgi complex will fuel our future studies of Golgi structure/function and provide justification for proteomic analysis of this organelle. Our approach to Golgi proteomics was to first isolate and characterize the intact organelle free of proteins in transit by use of tissue pretreated with cycloheximide. Then the stacked Golgi fraction was fractionated into biochemically defined subfractions: Triton X-114 insoluble, aqueous, and detergent phases. The aqueous and detergent phases were further fractionated by anion-exchange column chromatography. In addition, radiolabeled cytosol was incubated with stacked Golgi fractions containing proteins in transit, and the proteins bound to the Golgi stacks in an energy-dependent manner were characterized. All fractions were analyzed by two-dimensional (2-D) gel electrophoresis and identification numbers were given to 588 unique 2-D spots. Tandem mass spectrometry was used to analyze 93 of the most abundant 2-D spots taken from preparative Triton X-114 insoluble, aqueous and detergent phase 2-D gels. Fifty-one known and 22 unknown proteins were identified. This study represents the first installment in the mammalian Golgi proteome database. Our data suggest that cell fractionation followed by biochemical dissection of specific classes of molecules provides a significant advantage for the identification of low abundance proteins in organelles.     

Novel library of selenocompounds as kinase modulators

Although the causes of cancer lie in mutations or epigenic changes at the genetic level, their molecular manifestation is the dysfunction of biochemical pathways at the protein level. The 518 protein kinases encoded by the human genome play a central role in various diseases, a fact that has encouraged extensive investigations on their biological function and three dimensional structures. Selenium (Se) is an important nutritional trace element involved in different physiological functions with antioxidative, antitumoral and chemopreventive properties. The mechanisms of action for selenocompounds as anticancer agents are not fully understood, but kinase modulation seems to be a possible pathway. Various organosulfur compounds have shown antitumoral and kinase inhibition effects but, in many cases, the replacement of sulfur by selenium improves the antitumoral effect of compounds. Although Se atom possesses a larger atomic volume and nucleophilic character than sulfur, Se can also formed interactions with aminoacids of the catalytic centers of proteins. So, we propose a novel chemical library that includes organoselenium compounds as kinase modulators. In this study thirteen selenocompounds have been evaluated at a concentration of 3 or 10 μM in a 24 kinase panel using a Caliper LabChip 3000 Drug Discover Platform. Several receptor (EGFR, IGFR1, FGFR1…) and non-receptor (Abl) kinases have been selected, as well as serine/threonine/lipid kinases (AurA, Akt, CDKs, MAPKs…) implicated in main cancer pathways: cell cycle regulation, signal transduction, angiogenesis regulation among them. The obtained results showed that two compounds presented inhibition values higher than 50% in at least four kinases and seven derivatives selectively inhibited one or two kinases. Furthermore, three compounds selectively activated IGF-1R kinase with values ranging from -98% to -211%. In conclusion, we propose that the replacement of sulfur by selenium seems to be a potential and useful strategy in the search of novel chemical compound libraries against cancer as kinase modulators.     

Speciation of inorganic selenium in environmental water samples by inductively coupled plasma optical emission spectrometry after preconcentration by using a mesoporous zirconia coating on coal cinder

A simple, novel, and selective flow‐injection solid‐phase extraction with inductively coupled plasma optical emission spectrometry method was developed for the speciation of inorganic selenium in environmental water samples. A mesoporous zirconia film was simply introduced to coat coal cinder by means of the sol–gel technique, and the adsorptive performance of the coated material for Se(IV)/Se(VI) was investigated in different media. Both Se(IV) and Se(VI) can be retained quantitatively by the material in HCl/NaOH (pH 1.0–9.0) media, while only Se(IV) was adsorbed quantitatively in sodium acetate buffer (pH 3.5–6.0). Thus, the assay of Se(VI) is based on subtracting Se(IV) from total selenium by controlling different adsorptive media without employing any redox procedure. Under the optimum conditions, the detection limit of Se(IV) is 9.0 ng/L with an enrichment factor of 100, and the relative standard deviation is 3.6% (n = 9, C = 5.0 ng/mL). The developed method was successfully applied to the speciation of inorganic selenium in environmental water samples with satisfactory results. In order to further verify the accuracy of the developed method, it was applied to analysis of total selenium in GSBZ 50031–94 certified reference environmental water, and the determined values coincided with the certified values very well.     

Direct determination of selenoproteins in polyvinylidene difluoride membranes by electrothermal atomic absorption spectrometry

A method for the direct determination of selenoproteins in plastic membranes after protein separation by gel electrophoresis was developed. Quantification was based on the determination of the selenium content of the proteins by electrothermal atomic absorption spectrometry (ET-AAS) after manual introduction of membrane pieces into the graphite furnace. The proteins were separated by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) and subsequently transferred to a polyvinylidene difluoride (PVDF) membrane by semi-dry electroblotting. After staining the membrane, the protein bands were excised and chemical modifier was added on top of the excised membrane prior to atomic absorption measurement. Acceptable linearity was achieved in the range 2– 10 ng Se, corresponding to selenium concentrations close to 1 mg/L, when aqueous solutions of selenomethionine standard as well as selenoprotein standard were applied to the membrane. A characteristic mass of 54 ± 4 pg/0.0044 s was obtained for the selenoprotein standard. Protein transfer from polyacrylamide gel to the membrane was quantitative and no interferences were introduced. The method was used for identification of selenoprotein P after enrichment of the protein from human plasma. Received: 28 June 1999 / Revised: 14 September 1999 / Accepted: 16 September 1999     

Displacement electrophoresis in gel as a technique for separating proteins on a preparative scale.

A preparative displacement electrophoresis apparatus has been developed for the fractionation of proteins and other macromolecules. The separation is carried out down a vertical annular gel which is supported by a cylindrical glass cooler. The gel is protected from evaporation by a heavy inert insulating liquid with the terminating electrolyte floating on it. Very high potential drops and instabilities in the terminating electrolyte are avoided by continuously lowering the level of the inert liquid during the course of the separation. Fluorescent mobility markers have been synthesized, which make it possible to follow the progress of the separation and to divide the gel into fractions, once the separation is complete.