正负离子表面活性剂与两性表面活性剂的相互作用

本文研究正负离子表面活性剂与两性表面活性剂混合水溶液的表面性质, 以及两性表面活性剂对正负离子裘面活性剂溶解度的影响。结果表明: (1) 两性表面活性剂的加溶作用,有助于正负离子表面活性剂的溶解; (2) 加入两性表面活性剂的量适当, 混合溶液基本保持原正负离子表面活性剂的表面活性; (3) 正负离子表面活性剂与两性表面活性剂在表面层和胶团中分子间的相互作用比正负离子表面活性剂与非离子表面活性剂分子间的相互作用稍强HC-FC正负; 离子表面活性剂与两性表面活性剂混合体系在表面层中有可能形成双分子或多分子层结构。     

C16mimBr／Triton X-100混合体系的表面性质和胶团化行为

通过测定表面张力,研究了离子液体型表面活性剂溴化1-十六烷基-3-甲基咪唑（C16mimBr）和非离子表面活性剂TritonX-100（TX100）混合体系分别在水溶液和20％乙二醇（体积分数）水溶液中的表面性质和胶团化行为．结果表明,混合体系在水溶液和20％乙二醇水溶液中都存在协同效应,乙二醇的加入降低了协同作用,混...     

阴、阳离子表面活性剂混合体系在硅胶/水及硅胶/矿化水界面上的吸附

研究阴、阳离子表面活性剂混合体系(十二烷基氯代吡啶,辛基磺酸钠,辛基三乙基溴化铵/十二烷基苯磺酸钠)在硅胶,纯水和硅胶,矿化水界面上的吸附作用,探讨阴(阳)离子表面活性剂的存在对阳(阴)离子表面活性剂吸附作用的影响．结果表明,阴离子表面活性剂的存在基本不影响阳离子表面活性剂在带负电固体表面的吸附;而阳离子表面活性剂的存在却使本来吸附量就不大的阴离子表面活性剂在带负电的固体表面上不再吸附．在矿化水中阳离子表面活性剂的吸附量比在纯水中明显降低．从硅胶表面吸附机制解释了所得结果．     

Triton X-100/CTAB在乙二醇/水混合溶剂中的热力学性质和胶团化行为

利用表面张力法, 研究了非离子表面活性剂Triton X-100和离子表面活性剂十六烷基三甲基溴化铵(CTAB)混合体系在混合极性溶剂乙二醇/水(乙二醇的体积分数分别为5%、10%和20%)中的热力学性质和胶团化行为. 结果表明, 混合体系在乙二醇水溶液中存在协同效应, 临界胶束浓度随乙二醇含量的增加而增大. 利用Rubingh和Maeda模型计算了混合物中各组分在胶团相中的组成、相互作用参数以及自由能的贡献. 在实验研究的乙二醇浓度范围内, 发现该非离子/离子混合体系在离子组分摩尔分数约为0.3时, 协同效应最强.     

两亲嵌段共聚物聚D-亮氨酸-聚乙二醇与非离子表面活性剂C_(12)Glu的相互作用

采用表面张力法和圆二色谱技术研究了两亲嵌段共聚物聚D-亮氨酸-聚乙二醇单甲醚/非离子表面活性剂n-十二烷基β-D-葡萄糖苷(C12Glu)混合体系在水溶液中的相互作用.结果表明二者之间的疏水缔合作用较弱;聚合物中α-螺旋结构的含量随着体系中表面活性剂浓度的增大而增加.     

混合表面活性剂水溶液的浊点性质

正负离子表面活性剂混合体系在水溶液中很容易形成沉淀,这曾在很大程度上限制了该体系理论性质的研究及其应用。近年来的研究发现,该体系在吸附和胶团形成等方面存在很强的协同效应,对其相关性质的研究越来越多。与单一离子性表面活性剂性质不同,后者的溶解     

环境因素对正负表面活性剂体系相行为的影响

在1:1正负离子表面活性剂混合体系(十二烷基硫酸钠/辛基三甲基溴化铵 SDS-C8NM3Br; 十二烷基硫酸钠/十二烷基三甲基溴化铵,SDS-C12NM3Br)中加入短链脂肪醇 (乙醇,正丙醇,正丁醇),正负离子表面活性剂沉淀溶解,出现表面活性剂双水相.上相有液晶存在,下相有囊泡自发形成.折光率数据和电镜结果表明:上相为表面活性剂富集相,下相表面活性剂浓度较低.混合体系中,出现表面活性剂双水相所需短链脂肪醇的体积百分数,随短链脂肪醇的链长增加而降低.温度升高,出现表面活性剂双水相所需短链脂肪醇的体积百分数降低.对SDS/C8NM3Br/H2O体系的研究结果表明:超声处理,可使混合体系中沉淀向囊泡转化,与短链脂肪醇的加入后的作用类似.     

表面活性剂双水相的性质及其应用 Ⅰ. 表面活性剂双水相的微环境性质

阴、阳离子表面活性剂混合体系, 在一定浓度及混合比范围内, 可以形成两个互不相溶、平衡共存的水相, 称为表面活性剂双水相。其中阳离子表面活性剂过量的双水相体系, 称为阳离子双水相。本文分别以芘和罗丹明B作为探针, 用荧光探针法研究了摩尔比为1.6:1的C12NE和SDS混合体系成形成的阳离子双水相,测定其上层和下层的胶束微环境的极性和微粘度, 取得了有意义的结果。     

阴阳离子表面活性剂混合体系在克拉玛依油田中获得超低界面张力

利用阴阳离子表面活性剂复配技术,在克拉玛依油田实际油水体系中获得了超低界面张力.通过添加非离子保护剂的第三组分,阴阳离子表面活性剂混合体系在克拉玛依油田回注水体系中的溶解度大大提高.确定了相关体系能够获得超低界面张力的表面活性剂的浓度和混合的比例范围,在克拉玛依油田的多个实际油水体系中获得了具有较大复配比例和较低表面活性剂浓度的实际配方,其中部分体系油水界面张力可接近10-4mN·m-1.同时,这类阴阳离子表面活性剂混合体系具有很好的抗吸附能力,在石英砂吸附72 h后体系依然呈现优良的超低界面张力.     

正负离子表面活性剂在短链脂肪醇/水中沉淀-囊泡转化和双水相的形成

首次报道在短链脂肪醇/水溶剂中十二烷基硫酸钠和辛基三甲基溴化铵混合体系由沉淀转化为囊泡，并出现表面活性剂双水相的新现象，以期探索正负离子表面活性剂混合体系研究的新途径。     

The role of the surfactant head group in the emulsification process: binary (nonionic-ionic) surfactant mixtures

Dilute emulsions of dodecane in water were prepared under constant flow rate conditions with binary surfactant systems. The droplet size distribution was measured as a function of the mixed surfactant composition in solution. The systems studied were (a) the mixture of anionic sodium dodecyl sulfate (SDS) with nonionic hexa(ethyleneglycol) mono n-dodecylether (C12E6) and (b) the mixture of cationic dodecyl pyridinium chloride (DPC) with C12E6. At a constant concentration of SDS or DPC surfactant in solution (below the CMC) the mean emulsion droplet size decreases with the increase in the amount of C12E6 added to the solution. However, a sharp break of this droplet size occurs at a critical concentration and beyond this point the mean droplet size did not significantly change upon further increase of the C12E6. This point was found to corresponded to the CMC of the mixed surfactant systems (as previously determined from microcalorimetry measurements) and this result suggested the mixed adsorption layer on the emulsion droplet was similar to the surfactant composition on the mixed micelles. The emulsion droplet size as a function of composition at the interface was also studied. The mean emulsion droplet size in SDS-C12E6 solution was found to be lower than that in DPC-C12E6 system at the equivalent mole fraction of ionic surfactant at interface. This was explained by the stronger interactions between sulphate and polyoxyethylene head groups at the interface, which facilitate the droplet break-up. Counterion binding parameter (beta) was also determined from zeta-potential of dodecane droplets under the same conditions and it was found that (beta) was independent of the type of the head group and the mole fraction of ionic surfactant at interface.     

A 13C CP/MAS and 31P NMR study of the interactions of dipalmitoylphosphatidylcholine with respirable silica and kaolin

The interaction of silica and kaolin with dipalmitoylphosphatidylcholine (DPPC) has been studied using 13C and 31P solid state nuclear magnetic resonance spectroscopy. These studies explore the molecular interactions of these respirable dusts with a model lung surfactant species to characterize silica toxicity in mixed systems. The choline head group of DPPC was found to remain mobile when adsorbed on kaolin, in contrast to an immobile head group on silica. Further, glycerol carbon intensities were greatly diminished relative to that of choline carbons, a result attributed to broadening effects. These preliminary findings suggest that silica toxicity may not be related to choline mobility as previously noted.     

Interaction of cationic surfactants with carboxymethylcellulose in aqueous media

We have examined the polymer-surfactant interaction in mixed solutions of the cationic surfactants, i.e., dodecyltrimethylammonium chloride, dodecyltrimethylammonium bromide, tetradecyltrimethylammonium bromide, hexadecyltrimethylammonium bromide, tetradecyltriphenylphosphonium bromide, and tetradecylpyridinium bromide and a semiflexible anionic polyelectrolyte carboxymethylcellulose in water and aqueous salt solutions by various techniques: tensiometry, viscosimetry or ion-selective electrode method, and dynamic light scattering. We have investigated the effect of varying surfactant chain length, head group size, counterion, and ionic strength on the critical aggregation concentration (CAC) of mixed polymer surfactant systems and the collapse of the polymer molecule under different solution conditions. The CAC decreases with increasing alkyl chain length. Above a certain surfactant concentration, mixed aggregates start growing until their macroscopic phase separation. The growth is more rapid with greater surfactant tail length and with increasing head group size. This is attributed in both cases to the increasing hydrophobic interaction between polymer and surfactant. Among surfactants with monovalent halide counterions, iodide induces the strongest binding, reflected by the onset of growth of the mixed aggregates at low surfactant concentration. This is perhaps related to the decreasing hydration of the counterion from chloride to iodide. The surfactant concentration at which the viscosity of the solution starts to decrease sharply is smaller than the CAC, and probably reflects polymer chain shrinkage due to noncooperative binding.     

Effect of the Head Group of Surfactant on the Miscibility of Sodium Chloride and Surfactant in an Adsorbed Film and Micelle

The thermodynamic treatment of a surfactant mixture was applied to the mixture of sodium chloride, NaCl, with octyl methyl sulfoxide (OMS) and that with decyldimethylphosphine oxide (DePO). The surface tension of aqueous solutions of the mixtures was measured as a function of the total concentration and the composition of the mixtures at 298.15 K. The total surface densities of the mixtures and the composition of the adsorbed films and micelles were evaluated by applying thermodynamic equations to the expeimental results. It was found that the adsorbed film and micelle are almost composed of the surfactant and there is slight attractive interaction between the ions of NaCl and the head groups of OMS and DePO molecules in the adsorbed films and micelles. A difference in the miscibility of NaCl and surfactant was observed between the OMS and DePO systems and attributed to the difference in the hydration of the head group between OMS and DePO molecules. The comparison of these results with those of the mixtures of NaCl with tetraethylene glycol monooctyl ether (C(8)E(4)) and dodecylammonium chloride (DAC) indicated that the small difference in the miscibility in an adsorbed film and micelle among these nonionic surfactant systems arises from the difference in hydration and structure of the head groups and the large one between the nonionic surfactant and DAC systems results from electrostatic interactions between dodecylammonium and sodium ions. Copyright 2001 Academic Press.     

Conductometric and fluorometric investigations on the mixed micellar systems of cationic surfactants in aqueous media

Micellar properties of binary mixtures of hexadecyldiethylethanolammonium bromide surfactant with tetradecyldimethylammonium, trimethylammonium, triphenylphosphonium, diethylethanolammonium, and pyridinium bromide surfactants have been characterized employing conductometric and fluorescence techniques. The critical micelle concentration (cmc*) and the degree of counter-ion binding values (delta) of the binary systems were determined from the conductivity measurements. The results were analyzed in light of various existing theories to calculate micellar composition, activity coefficients, and the interaction parameter (beta). Partial contribution of each surfactant, cmc1*, cmc2*, to the overall cmc* value was also evaluated. Aggregation numbers and micropolarity of the mixed micelles were determined from fluorescence measurements. The results were discussed in terms of synergetic interactions in these systems on the basis of the head group/head group and tail/tail interactions and the counter-ion binding.     

Formation and coexistence of the micelles and vesicles in mixed solution of cationic and anionic surfactant

In the aqueous mixtures of sodium alkylcarboxylate and alkyltrimethylammonium bromide, large unilamelar vesicles can be formed spontaneously or by sonication as the total carbon number in the HC chains is 19 (or larger). Vesicle formation can be influenced by changes of pH, molar ratio of the two surfactant components, and the polar head group of cationic surfactant. Micelles may coexist with the vesicles in these mixed systems. The larger hydrodynamic radius (200 nm) and aggregation number (800) illustrate that the shape of the micelle in 1:1 C₉H₁₉COONa–C₁₀H₂₁N(CH₃)₃Br is rod-like. In some mixed systems, the micelles can be transformed into stable vesicles by sonication — a phenomenon revealed for the first time. The surface-chemical properties of these catanionic surfactant solutions and the stabilities of vesicle have been studied systematically.     

SDS对SB3-12胶束表面电荷密度的调控作用及对药物增溶的影响

两性离子甜菜碱表面活性剂(SB3-12)胶束具有较好的生物相容性,由于相反电荷的极性头之间具有静电中和作用,胶束表面具有小的负电荷密度。当加入阴离子的十二烷基硫酸钠(SDS)以后,负离子SD-与SB3-12胶束极性区内层季铵正电荷的静电中和作用,能连续地调节胶束表面磺酸基的负电荷密度,这有利于对药物分子的选择性增溶和调节在生理条件下的药物的输送。等温滴定量热(ITC)研究发现SB3-12和SDS有强的协同效应,混合临界胶束浓度(CMC)和胶束化焓明显降低,并得到两者协同效应的弱静电作用机理。当模型药物分子芦丁(Rutin)与SB3-12/SDS混合胶束作用时,芦丁7位羟基的氢解离后的阴离子与SDS共同作用于SB3-12形成混合胶束。UV-Vis吸收光谱和~1H NMR谱研究发现,在SB3-12胶束中,芦丁分子的A环位于季铵阳离子附近,B环位于两个相反电荷之间的弱极性区域。在SDS胶束中,B环位于栅栏层,而A环和二糖暴露于水相侧。在混合胶束中,随着SDS摩尔分数增加,对A环的静电吸引变弱。离子表面活性剂对两性离子表面活性剂胶束表面电荷密度的调节作用,本质上是对胶束极性区域的物理及化学性质的微调,进而实现对药物的可控增溶。     

Surfactant Chain Length Effect on the Structural Parameters of Nonionic Microemulsions

In this study we estimated the structural parameters of (water+propylene glycol)/sucrose esters/(benzaldhyde+ethanol) systems. The weight ratios of water/propylene glycol and that of benzaldhyde/ethanol equal 2 and 1, respectively. The sucrose esters were sucrose laurates (L595, L1695, and SM1200), sucrose myristate (M1695), sucrose palmitate (P1670), sucrose oleate (O1570), and sucrose stearate (S1570). The pseudoternary phase behavior at 37°C was explored to determine the extension of the microemulsion phase regions. A one‐phase microemulsion region extending from the oil rich region to the water rich corner was observed in these systems. It was found that minor changes in the surfactant chain length, structure, and composition suffice to provoke a considerable change in the aggregation number, core radius and interfacial area per surfactant and cosurfactant molecules head groups in the formed microemulsions. The interfacial area per surfactant head group decreases with the increase in the surfactant chain length. For a sucrose ester with a given chain length the interfacial area per surfactant head group decreases with the increase in the surfactant monoester content. The interfacial area per surfactant head group increases with the increase in the surfactant concentration and the water core volume in the formulated microemulsions.     

Mixed micelles of alkylamines and cetyltrimethylammonium chloride

The influence of chain length and the nature of the head group on the composition of micelles of a binary mixture of cetyltrimethylammonium chloride with both unsubstituted and N-substituted n-octyl, n-decyl, and n-lauryl amines was established from the variation of the critical micelle concentration (cmc) as a function of the solution composition. A synergistic effect was observed in all instances that were found to be correlated with chain length and the type of N-substituent on the alkylamine head group. Experimental data were compared with theoretical predictions based on the equilibrium between micelles and monomers in solution. The Motomura treatment was used to determine the composition of each compound in the mixed micelles (Xi(m)). Mixing nonideality was expressed in terms of the molecular interaction parameter (beta12) as determined using the theory of Holland and Rubingh. Finally, the molecular thermodynamic model for mixed surfactant systems developed by Puvvada and Blankschtein was used to estimate the micellization free energy (DeltaGM) and to evaluate the synergistic phenomenon.