Electrolytic conductivity of poly(1,3-propylene phosphate) solutions containing mono- and divalent-counterions

The results of conductivity measurements for aqueous solutions of poly(1,3-propylene phosphate) (PPP), which can be considered as a synthetic analogue of naturally occurring teichoic acids, are reported. Experiments were carried out with oligomeric fractions of a polymer in acidic, sodium, potassium, magnesium and calcium forms. The concentration and molecular weight dependence of the equivalent conductivity of PPP was analysed and the limiting equivalent conductivity determined. From the conductivity data, the polyion-counterion interaction parameter F and the equivalent conductivity of a polyion _p were calculated. It was shown that both F and _p depend on polyelectrolyte solution concentration and molecular weight of PPP. Conclusions concerning mono- and divalent metal ions binding to PPP are drawn.     

Pecularities of the thermomechanical behaviour of ultra-high molecular weight linear polyethylene and its blends with linear polyethylene of normal molecular weight

Ultra-high molecular weight polyethylene UHMWPE (M _w=4 · 10⁶,I _s=O g/ 10 min), high density polyethylene of normal molecular weight NMWPE (I _s= 4.8 g/10 min) and their blends have been investigated by means of thermomechanical loading in constant and impulse regime. It has been established that after melting, NMWPE passes to a viscous-liquid state. After melting at 138 °C UHMWPE passes to a high-elastic state. The transition of UHMWPE to a viscous-liquid state takes place at temperatures higher than 180 °C and is accompanied by a high-elastic reversible deformation. The blends of UHMWPE with 10 and 20 mass % of NMWPE show a plateau on the thermomechanical curves, corresponding to a high-elastic state, in a shorter temperature range where the deformation is greater. The blends containing the higher percent of NMWPE show thermomechanical curves lacking such a plateau. All blends are characterized by a singular thermomechanically defined temperature of melting, which increases with increase of UHMWPE content. The existence of the high-elastic state in the curves of UHMWPE and its blends containing NMWPE less than 30 mass % above their melting temperatures is explained by the high degree of physical crosslinking of UHMWPE.     

Structure-property relationship of polyurethane ionomer

Polyurethane (PU) ionomers were prepared using various types of polyol (PTAd, PCL, PTMG, and PPG) and isocyanate (MDI, HDI, and IPDI), together with different extender (DMPA) contents, degree of neutralization, and number average molecular weight (M _n) of polyol. Modulus (E), strength (_b), and glass transition temperature (T _g) significantly increased with the increased amount of extender and extender neutralization. Among three of the iocyanate used, PU from MDI gave the highest modulus, strength, andT _g. With regard to theM _n of PTAd (600, 1000, 2000), PU from PTAd 600M _n gave the highest modulus, strength, andT _g, due probably to the highest hard segment content and phase mixing. On the other hand, PU from PTAd 2000M _n gave significantly improved strength over PTAd 1000M _n, and the highest elongation. The results were interpreted in terms of soft-segment crystallization, and soft-hard phase separation, which was concluded from the lowered softT _g.     

Poly(styrene-b-2-vinylpyridine-1-oxide) and poly(dimethylsiloxane-b-2 vinylpyridine-1-oxide) diblock copolymers. 1. Preparation and characterisation

Sequential anionic polymerisation routes have been used to prepare AB diblock copolymers, where A is either polystyrene or polydimethylsiloxane, and B is poly(2-vinylpyridine-1-oxide). The latter block, which is water-soluble, was obtained from the oxidation of poly(2-vinylpyridine) using peroxyacetic acid (giving 100% yield).The resultant diblock copolymers were characterised by gel-permeation chromatography, proton nuclear magnetic resonance and gravimetric microanalysis to give relative block lengths and polydispersity indices. For both types of block copolymersM _w /M _n values <1.25 could be readily obtained under carefully controlled conditions.     

Dependence of the activity of a rhizopus lipase on microemulsion composition

Enzymatic hydrolysis of a model triglyceride, palm oil, was carried out with lipase fromRhizopus sp. in microemulsions with varying water content. The microemulsions were based on a nonionic surfactant, pentaethylene glycol monododecyl ether (C12 EO5), buffered water solution and an oil component consisting of isooctane and palm oil at a weight ratio of 20:1. The structure of the microemulsions was characterized using Fourier transform pulsed-gradient spin-echo¹H NMR. The rate of reaction decreased as the water content of the reaction medium was increased. The self-diffusion coefficient of water, D_w was found to be constant within the interval 1–20% water. The difference in reactivity is believed to be due to a difference in structure of the palisade layer between water and hydrocarbon microdomains. The nonionic surfactant was demonstrated to be unsuitable for enzymatic reactions since only partial hydrolysis was obtained in all experiments. The surfactant, however, did not cause enzyme deactivation, even at very high concentrations.     

Phase transition of polycarbonate in blends with liquid crystal

Phase transition temperatures of polycarbonate film consisting of micron-sized liquid crystalline droplets were investigated using differential scanning calorimetry (DSC) and thermo-optical analysis (TOA) methods. Both a decrease in (T _g ) and (T _m ) of the polycarbonate with an increase of liquid crystal (LC) content in the sample were observed. The decrease ofT _g is related to the plastifying effect of a low molecular weight LC substance remaining soluble in the polycarbonate matrix. A fraction of the liquid crystal contained in the droplets was estimated on the basis of theT _g decrease.     

Polymer adsorption on fine particles; the effects of particle size and its stability

The effects of particle size on polyacrylamide (PAAm,M _w =59×10⁴, 500×10⁴) adsorption were investigated using a series of well-characterized hematite (-Fe₂O₃) dispersions. The -Fe₂O₃ particles with highly monodisperse and nearly spherical shape ranged in radius from 23 nm to 300 nm. the maximum amount of PAAm adsorption (M _m ) in each system, showed a steady increase with decreasing particle radius and was influenced strongly by particle concentrations in the medium. Furthermore, it was realized that the diameter of -Fe₂O₃ particles after treatment with PAAm under different particle concentrations decreased with increasing particle concentration. The relation between particle concentration in the medium and particle size after treatment was also influenced by the medium pH, i.e., at the medium pH close to the isoelectric point of -Fe₂O₃ particles (pH^o=9.2), the particle size after treatment increased with increasing particle concentration. All these results suggest that in the system of ultra-fine particles, the mixing process between particle-particle and polymerparticle will play an important role on the conformation of adsorbed polymer layer.     

The effect of carrier solution on the particle size distribution of inorganic colloids measured by steric field-flow fractionation

The number average and the weight average particle diameters for suspended inorganic colloids found by the new technique of steric field-flow fractionation may be successfully used provided that the most suitable carrier solution is selected, in order to minimize the coagulation and adhesion phenomena.In the present work polydisperse, irregular colloidal particles of FePO₄·2H₂O (strengite) were studied. The average particle diameters were found to vary with the electrolyte concentration in the suspending medium. A strong variation of the number and weight average particle diameters was also observed with the quantity of the surfactant added to aquatic medium in order to increase colloidal stability. The influence of the electrokinetic charge of the FePO₄·2H₂O particles in relation to the surface charge of the material of the column employed, on the particle size measured was investigated. The proper carrier solution for minimizing coagulation and adhesion phenomena in the FePO₄·2H₂O colloidal particles was found to contain either 1.5% (v/v) detergent FL-70 and 0.1 MKNO₃ or 0.5% (v/v) detergent FL-70 and 0.033 MNa₂SO₄.     

Infrared and raman studies on the phase structure of barium ethyl(octyl)phosphate-water system

Barium ethyl(alkyl)phosphates, as new simple surfactants ((C₂H₅O)(RO)-PO ₂ ^– )₂Ba²⁺ with various chain length ofR, were synthesized. The infrared spectra in the CH stretching region were measured for these surfactants in the solid state and in aqueous solution, and assignments were made. In particular, the ordering and environment of octyl chains in the different phases of the barium ethyl(octyl)phosphate-water system were studied by the Fourier-transform-infrared and Raman spectra. The CH stretching bands in the infrared spectra reflected the ordering and environment of octyl chains in each phase. The Raman band connected to the PO ₂ ^– symmetric stretching mode was sensitively shifted. This was caused by the change of aggregation structures with different Ba²⁺...PO ₂ ^– interaction. The infrared band arising from the PO ₂ ^– antisymmetric stretching mode was insensitive to the phase structures. The C–C stretching region in the infrared spectra was used to discuss the ordering of each phase.     

Ultracentrifuge studies on the interaction of some basic polypeptides with water-structure influencing anions

The aim of this work is to investigate the dependence of the molecular weight and the 2. virial coefficient of poly-L-lysine and N -methylated poly-L-lysine in solutions of water-structure-influencing anions.In the case of poly-L-lysine, the ultracentrifugal and CD-spectroscopic measurements show an increasing molecular weight and a complex between poly-L-lysine and the strong-water-structure-breaking anion ClO ₄ ^– . In solutions of structure-forming anions, an independence of the molecular weight from the anion-concentration can be recognized.The 2. virial coefficient of structure-breaking anions is generally higher than for structure-forming anions.At a pH of 10.6, the molecular weight and the 2. virial coefficient is independent of the structure-breaking anion.In NaCH₃ SO₄ solutions, the tendency of the anion concentration and the molecular weight are parallel.Compared to this behavior, N -methylated poly-L-lysine was likewise investigated; it shows a similar trend of the molecular weight in dependence of the NaCH₃ SO₄ concentration.     

Solvent-induced phase separation in polycarbonate blends PC/TMPC

Compatibility of the polycarbonates of bisphenol A (PC) and tetramethyl bisphenol A (TMPC) was studied in glassy films cast from CH₂Cl₂ at room temperature, and above the glass-transition temperature. Blends with different compositions and of different molecular weights were analyzed by DSC and small-angle neutron scattering (SANS). Solution studies were made with light scattering and microscopy. Some of the blend films were two-phased when cast at room temperature, but all films were one-phased in equilibrium above the glass transition. The SANS data demonstrated that phase separation in the cast films was not caused by inherent incompatibility of PC and TMPC, but was induced by the solvent CH₂Cl₂. The effect is caused by a closed miscibility gap in the ternary solution system PC/TMPC/CH₂Cl₂.     

Effect of protein content on the surface activity and viscosity of emulsan

Emulsan, produced byAcinetobacter calcoaceticus RAG-1, consists of a lipoheteropolysaccharide-protein complex. The amount of protein in the complex depends on the purification procedure. Maximum hexadecane-in-water emulsifying activity of emulsan was obtained with preparations containing 8–16 % protein. Neither deproteinized preparations (apoemulsan) nor protein-rich preparations emulsified hexadecane-in-water; however, mixtures of these preparations (containing 10–15 % total protein) were potent emulsifiers.Emulsifying activity was also obtained with a mixture of apoemulsan and polysaccharide-free emulsan protein. The stimulatory role of protein in the activity of emulsan was also demonstrated by pronase treatment of the complex. The presence of protein in the complex was important for lowering interfacial tension between hexadecane and water. Apoemulsan solutions showed _i values of 30 mN/m whereas, emulsan containing more than 6% protein showed values of 13–15 mN/m. Viscosity studies showed that: (i) The higher the protein content in the complex, the lower its intrinsic viscosity, indicating that association of protein with the polysaccharide backbone results in less extended conformation; (ii) the complex appears to be stable between 30 ° and 80 °C; and (iii) mixtures of apoemulsan and emulsan had intrinsic viscosities close to the value predicted from addition of the weight-fraction contribution of the individual components. The synergistic emulsifying activity of emulsan mixtures is explained in terms of surface tension lowering by the protein component and formation of stable interfacial films by the high molecular weight polysaccharide component.Preliminary results of this work were presented at the 5th International Conference on Surface and Colloid Science, Potsdam, N.Y., June 1985.     

Miscibility behavior of ternary lipidphospholipid/water systems

Differential-scanning-calorimetry was applied to study the lyotropic and thermotropic properties of the two ternary systems dimyristoylcephaline (di-(C14:0)-PE)/Palmitic acid (C₁₅COOH)/water (H₂O) and dimyristoylcephaline (di-(C14:0)-PE)/palmitic acid methyl ester (C₁₅COOMe)/water (H₂O) in dispersions with excess water (50 wt.%).The phase diagrams of both systems showed that the two systems differ in their miscibility behavior. The system di-(C14:0)-PE/C₁₅COOH/H₂O is completely miscible in its high-temperature phase. In the low-temperature phase the mixing gap was found within the concentration range of C₁₅COOH and was also indicated by a maximum value of the transition enthalpy of the pseudo-binary mixtures.In the pseudo-binary system di-(C14:0)-PC/C₁₅COOMe/H₂O, the tendency towards demixing is much more pronounced. It was observed that the incorporated C₁₅COOMe melted above its normal melting point, but below the transition temperature of di(C14:0)-PE/H₂O system; therefore, the phase transition started at lower temperature. In the low-temperature phase, both lipids are partially miscible. The demixing range of the phase diagram lies within the concentration region of C₁₅COOMe. Up to the mole fraction ofXC₁₅COOMe=0.43, C₁₅COOMe can be incorporated into theL-phase of the system di-(C14:0)-PE/H₂O.     

Grafting onto ultrafine ferrite particles: Reaction of isocyanate-capped polypropylene glycol with hydroxyl groups on the surface

The grafting of polypropylene glycol (PPG) onto an ultrafine ferrite by the reaction of hydroxyl groups on the surface with isocyanate-capped PPG (PPG-NCO), prepared by the reaction of an equimolecular amount of PPG with tolylene 2,4-diisocyanate, was investigated. When PPG-NCO (M _n=2.5×10³) was heated with the ferrite in bulk, the percentage of grafting onto the ferrite at 120 °C was increased up to 18.5%. On the contrary, the grafting by the reaction of PPG with hydroxyl groups on the ferrite at 120°C was scarcely observed. The grafted PPG onto the ferrite was removed by hydrolysis with a dilute methanol solution of potassium hydroxide. Therefore, it was considered that PPG was grafted onto the ferrite surface with urethane bond. The grafting of PPG onto the surface was also confirmed by infrared spectra. The reaction of PPG-NCO with the ferrite was accelerated by the addition of-picoline as a catalyst. PPG-grafted ferrite was found to produce a stable colloidal dispersion in organic solvents. Furthermore, the effect of molecular weight of PPG-NCO on the grafting onto the ferrite was discussed.     

The effect of segment length and concentration on dielectric properties of polypropyleneoxide-based polyurethanes

Three series of segmented polyurethanes based on MDI, variable chain extender, and polypropylene oxide of MW=1000, 2000, and 3000 were synthesized and their dielectric behavior examined.Dielectric relaxations in the segmented polyurethanes were investigated between –150°C and +150°C in the 100 Hz to 10 kHz range. In general, three transitions, designated as, , and were observed, and ascribed in accordance with calorimetric relaxations to glass transitions of the hard and soft segments, and Shatzki-type motions, respectively. The effect of structure variables such as soft segment size, type of chain extender (ethylene glycol, butane diol, and hexane diol) and soft segment concentration, as well as the effect of interaction of the phases on dielectric properties was discussed. It was found that a certain degree of phase mixing exists in all series, detected by the variation of theT _g of the soft segment with soft segment concentration, contrary to DSC results, which was ascribed to thermal treatment prior to the dielectric measurements. It appears that interfacial polarization becomes important only above the transition temperature.     

The preparation of monodisperse polyacrylonitrile particles in the presence of AB block co-polymers of poly-2-vinylpyridine/poly tertbutylstyrene

Radical dispersion polymerisation of acrylonitrile in cyclohexane was performed in the presence of the diblock copolymer poly-2-vinylpyridine/poly tertbutylstyrene, giving polymer latex particles stabilised by surface layers of chains of poly tertbutylstyrene. A seeded polymerisation route was employed and the addition of up to a further seven feeds of reactants resulted in the particle growth and the total volume fraction of particles increased to 0.2. The effect of varying the molecular weight of the stabiliser and stabiliser concentration was also investigated. Particle diameter in the range 40–150 nm were obtained depending on the condition of the polymerisation.     

XPS analysis (ESCA) of the surface composition of poly(styrene/2-hydroxyethyl methacrylate) microspheres produced by emulsifier-free emulsion polymerization

Polymer microspheres composed of various compositions of styrene and 2-hydroxyethyl methacrylate (HEMA) were produced by batch emulsifier-free emulsion polymerization. The HEMA content at the surface, [HEMA] _s , of the microspheres powdered by freeze-drying was determined by both quantitativeC ^1s /O ^1s analysis andC ^1s peak shape analysis of the x-ray photoelectron spectroscopic spectra. When the HEMA content in the microsphere, [HEMA] _p , was less than about 5 mole%, the [HEMA] _s values determined by the two different methods showed good agreement. At [HEMA]_p above 5 mole %, [HEMA]_s values determined by the first method were about 15 mole % greater than those determined by the second. They both showed a similar tendency with the [HEMA] _s being higher than the [HEMA] _p , e.g., when [HEMA] _p was 1 mole %, [HEMA] _s was 11 mole %. The intensity of the satellite peak due to the ^* transition of the benzene ring of the styrene component decreased with an increase in [HEMA] _p , to zero at 5 mole % of [HEMA] _p . These results indicate that the HEMA component is localized at the surface.Part CVIII of the series Studies on Suspension and Emulsion.     

Structure transfer from a polymeric melt to the solid state. Part II: Dependence on molecular weight

Melt spinning experiments of polyethylene, using a high quenching rate have been carried out. Molecular weight has been varied. From measurements of the mechanical properties of the monofilaments produced it is concluded that melt history influences the solid state behavior. This is reflected in the hypothesis of a transference of knots, preexisting in the melt into the solid state. Measurements of the elastic recovery allow to offer an interpretation, in which this network of knots does not percolate, until a critical value of the molecular weightM _{c knot}10⁵ is surpassed. The possible influence of these knots on the mobile entanglements is discussed.On leave from the Institut für Technische und Makromolekulare Chemie, Universität Hamburg, Hamburg, Germany.     

Conformational change of poly(L-lysine) and poly(L-ornithine) and cooperative binding of sodium alkanesulfonate surfactants with different chain length

Conformations of poly(L-lysine) (PLL) and poly(L-ornithine) (PLO) were examined in aqueous solutions of sodium alkanesulfontates (C_nSO₃Na, n=9, 10, 11, 12) in the presence of 0.02 M NaCl by circular dichroism (CD) spectroscopy. These surfactants induce the-structure for PLL and the-helix for PLO. The binding of surfactants on the polypeptides was measured potentiometrically with a surfactant ion electrode and was found to be highly cooperative. The cooperativity increases with increasing chain length of surfactant. The behavior accompanying the surfactant binding and the conformational change indicated that the conformational change requires a certain amount of bound surfactants in the case of C₉SO₃Na and starts immediately on binding of surfactant in the case of C_{1 2}SO₃Na. The clustering of bound surfactants due to the cooperative binding as well as neutralization of polypeptides contributes to their conformational change. A slow conformational change of PLO was found in the time scale of hours, sometimes days, for C₉- and C₁₀SO₃Na at low concentrations, but the binding process reached the equilibrium quickly. This slow mode might occur due to the slow interaction between surfactant/polypeptide complexes.     

The association of urethane-polyethyleneoxide (HEUR) thickeners,as studied by NMR self-diffusion measurements

The concentration and molecular weight dependence of the self-diffusion coefficient (D _self) of associative polymers of HEUR-type in aqueous solution have been investigated using FT-PGSE-NMR technique. The idea of three-dimensional network formation as a result of aggregation of the hydrophobic end-groups of the polymer in junctions is supported through the observed dramatic lowering ofD _self with increased concentration. The network-formation efficiency depends on the polymer molecular weight as well as the hydrophobicity of the end-groups.A double logarithmic dependence of the self-diffusion coefficient versus concentration (c) has been observed:D _selfc ^–a1,a2 . The first exponent,a ₁, is valid at low concentration, <1% polymer per weight solution, and ranges from 0.5 to 1, whereas the second exponent,a ₂, describing systems of higher concentration, ranges from 2 to 2.7.