In the first proven SN2' fullerene reaction,both C3 and C1 C60F36 hydrolyse to C1 isomers of C60F35OH that eliminate HF to give epoxides C60F34O; C60F36O oxides are shown to be ethers,and a fourth isomer of C60F36 exists

On standing in organic solvents containing traces of water, C3 and C1 isomers of C60F36 slowly convert to C1 isomers of C60F35OH. Both fluorofullerenols eliminate HF during EI mass spectrometry to give C60F34O epoxides, one fullerenol being much less stable than the other to the extent that the mass spectrum shows only the epoxide. Both C60F35OH isomers have C1 symmetry, one being identified by the remarkable linear relationship between chemical shifts in its 19F NMR spectrum and those in the spectrum of C1 C60F36; the spectrum of the other shows the pattern of C3 C60F36 rendered asymmetrical by the replacement of one F by OH. The reactions are facilitated by the presence of isolated double bonds, and provide the first proven examples of an SN2' reaction of a fullerene derivative. Our observation explains why only a limited number of fluorines are readily replaced in C60F36 and why C60F18 is by contrast much more resistant to hydrolysis. We have isolated also a pure isomer of C60F36O, which is shown to be an oxahomofullerene (ether) apparently derived from C1 C60F36, and an impure fraction comprising a fourth isomer of C60F36, a trifluoromethyl derivative of C60F36, a second isomer of C60F36O, and an unknown species of 1392 u.     

Thermal stability and degradation kinetic study of white and colored cotton fibers by thermogravimetric analysis

Complexation of neptunium(V) with fluoride in aqueous solutions at elevated temperatures was studied by spectrophotometry and microcalorimetry. Two successive complexes, NpO₂F(aq) and NpO₂F₂⁻, were identified by spectrophotometry in the temperature range of 10–70°C. Thermodynamic parameters, including the equilibrium constants and enthalpy of complexation between Np(V) and fluoride at 10–70°C were determined. Results show that the complexation of Np(V) with fluoride is endothermic and that the complexation is enhanced by the increase in temperature — a two-fold increase in the stability constants of NpO₂F(aq) and more than five-fold increase in the stability constants of NpO₂F₂⁻ as the temperature is increased from 10 to 70°C.     

Thermodynamic origin of the increased rate of hydrolysis of phosphate and phosphorothioate esters in DMSO/water mixtures

The hydrolysis rates of the dianions of phosphate and phosphorothioate esters are substantially accelerated by the addition of polar aprotic solvents such as DMSO and acetonitrile. The activation barrier DeltaG is smaller due to a lower enthalpy of activation. The enthalpy of transfer of p-nitrophenyl phosphate (pNPP) and p-nitrophenyl phosphorothioate (pNPPT), from water to 0.6 (mol) aq DMSO (60 mol % water in DMSO) were measured calorimetrically. The enthalpies of activation for the hydrolysis reactions in the two solvents permitted the calculation of the enthalpy of transfer of the transition states. This transfer is thermodynamically favorable for both the reactants and the transition states but is more favorable for the transition states. In the case of pNPP, the enthalpy of transfer of the reactant is -23.9 kcal/mol, compared to -28.3 for the transition state. The difference is greater for pNPPT, where the enthalpy of transfer of the reactant is -23.2 kcal/mol and that for the transition state is -35.3. The results show that the reduced enthalpies of activation in both hydrolysis reactions arise not from a destabilization of the reactants in the mixed solvent, but from the fact that the enthalpy of transfer of the transition states to the mixed solvent is significantly more negative than the enthalpy of transfer of the reactants.     

Speciation studies in aqueous HCO3(-)-CO3(2-) solutions. A combined Raman spectroscopic and thermodynamic study

Raman (and a few additional FT-IR) spectroscopic measurements of sodium and potassium carbonate and hydrogencarbonate in aqueous solution have been carried out over wide concentration ranges at room temperature and at elevated temperatures. The bands of the CO3(2-)(aq) and HCO3(-)(aq) species, which possess pseudo D3h and C1 symmetry respectively, have been assigned and discussed. Quantitative Raman measurements and thermodynamic calculations on KHCO3 solutions show that the salt does not dissolve congruently in aqueous solutions but forms small amounts of CO3(2-). Quantitative Raman spectroscopic measurements have also been carried out on K2CO3 solutions and the hydrolysis of the carbonate ion has been determined as a function of concentration at room temperature and as a function of temperature up to 219 degrees C. The pK2 value of carbonic acid at 23 degrees C has been established as 10.35 by Raman spectroscopy, a value that compares favourably with published thermodynamic values.     

19F NMR study of the equilibria and dynamics of the Al3+/F- system

A careful reinvestigation by high-field 19F NMR (470 MHz) spectroscopy has been made of the Al3+/F- system in aqueous solution under carefully controlled conditions of pH, concentration, ionic strength (I), and temperature. The 19F NMR spectra show five distinct signals at 278 K and I = 0.6 M (TMACl) which have been attributed to the complexes AlFi(3-i)+(aq) with i < or = 5. There was no need to invoke AlFi(OH)j(3-i-j)+ mixed complexes in the model under our experimental conditions (pH < or = 6.5), nor was any evidence obtained for the formation of AlF6(3-)(aq) at very high ratios of F-/Al3+. The stepwise equilibrium constants obtained for the complexes by integration of the 19F signals are in good agreement with literature data given the differences in medium and temperature. In I = 0.6 M TMACl at 278 K and in I = 3 M KCl at 298 K the log Ki values are 6.42, 5.41, 3.99, 2.50, and 0.84 (for species i = 1-5) and 6.35, 5.25, and 4.11 (for species i = 1-3), respectively. Disappearance of the 19F NMR signals under certain conditions was shown to be due to precipitation. Certain 19F NMR signals exhibit temperature- and concentration-dependent exchange broadening. Detailed line shape analysis of the spectra and magnetization transfer measurements indicate that the kinetics are dominated by F- exchange rather than complex formation. The detected reactions and their rate constants are AlF2(2+) + *F- reversible AlF*F2+ + F- (k02 = (1.8 +/- 0.3) x 10(6) M-1 s-1), AlF3(0) + *F- reversible AlF2*F0 + F- (k03 = (3.9 +/- 0.9) x 10(6) M-1 s-1), and AlF3(0) + H*F reversible AlF2*F0 + HF (kH03 = (6.6 +/- 0.5) x 10(4) M-1 s-1). The rates of these exchange reactions increase markedly with increasing F- substitution. Thus, the reactions of AlF2+(aq) were too inert to be detected even on the T1 NMR time scale, while some of the reactions of AlF3(0)(aq) were fast, causing large line broadening. The ligand exchange appears to follow an associative interchange mechanism. The cis-trans isomerization of AlF2+(aq), consistent with octahedral geometry for that complex, is slowed sufficiently to be observed at temperatures around 270 K. Difference between the Al3+/F- system and the much studied Al3+/OH- system are briefly commented on.     

Copper(II) complexes of novel N-alkylated derivatives of cis,cis-1,3,5-triaminocyclohexane. 2. Metal-promoted phosphate diester hydrolysis

Aqueous copper(II) N,N',N' '-trimethyl-cis,cis-1,3,5-triaminocyclohexane (Cu(tach-Me(3))(2+)(aq)) promotes the hydrolysis of activated phosphate diesters in aqueous medium at pH 7.2. This complex is selective for cleavage of the phosphate diester sodium bis(p-nitrophenyl) phosphate (BNPP), the rate of hydrolysis of the monoester disodium p-nitrophenyl phosphate being 1000 times slower. The observed rate acceleration of BNPP hydrolysis is slightly greater than that observed for other Cu(II) complexes, such as [Cu([9]aneN(3))Cl(2)] ([9]aneN(3) identical with 1,4,7-triazacyclononane). The rate of hydrolysis is first-order in phosphate ester at low ester concentration and second-order in [Cu(tach-Me(3))](2+)(aq), suggesting the involvement of two metal complexes in the mechanism of substrate hydrolysis. The reaction exhibits saturation kinetics with respect to BNPP concentration according to a modified Michaelis-Menten mechanism: 2CuL + S <==> LCu-S-CuL --> 2CuL + products (K(M) = 12.3 +/- 1.8 mM(2), k(cat) = (4.0 +/- 0.4) x 10(-)(4) s(-1), 50 degrees C) where CuL (triple bond) [Cu(tach-Me(3))](2+), S (triple bond) BNPP, and LCu-S-CuL is a substrate-bridged dinuclear complex. EPR data indicate that the dicopper complex is formed only in the presence of BNPP; the active LCu-S-CuL intermediate species then slowly decays to products, regenerating monomeric CuL.     

Density functional theory studies on the external OH−‐induced barrierless proton dissociation mechanism for the forced hydrolysis reaction of Al3+(aq)

The forced hydrolysis reaction of aqueous aluminum ion (Al³⁺) is of critical importance in Al chemistry, but its microscopic mechanism has long been neglected. Herein, density functional calculations reveal an external OH⁻‐induced barrierless proton dissociation mechanism for the forced hydrolysis of Al³⁺(aq). Dynamic reaction pathway modeling results show that the barrierless deprotonations induced by the second‐ or third‐shell external OH⁻ proceed via the concerted proton transfer through H‐bond wires connected to the coordinated waters, and the inducing ability of the external OH⁻ decreases with increasing hydration layers between Al(H₂O)₆³⁺ and the external OH⁻. The OH⁻‐induced forced hydrolysis mechanism of Al³⁺(aq) is quite different from its self‐hydrolysis mechanism without OH⁻. The inducing ability is a unique characteristic of OH⁻, rather than other anions such as F⁻ or Cl⁻.     

Carbon-fluorine bond cleavage in the preparation of Osmium(III) and Osmium(IV) fluorothiolate complexes. Fluorine by fluorine NMR-assignment and fluxional processes

Reactions of OsO4 with HSR (R=C6F5, C6F4H-4,) in refluxing ethanol afford [Os(SC6F5)3(SC6F4(SC6F5)-2)] (1) and [Os(SC6F4H-4)3(SC6F3H-4-(SC6F4H-4)-2)] (2), which involve the rupture of C-F bonds. At room temperature, the compound [Os(SC6F5)3(PMe2Ph)2] or [Os(SC6F5)4(PMe2Ph)] reacts with KOH(aq) in acetone, giving rise to [ Os(SC6F5)(SC6F4(SC6F4O-2)-2)(PMe2Ph)2] (3), through a process involving the rupture of two C-F bonds, while the compound [Os(SC6F4H)4(PPh3)] reacts with KOH(aq) in acetone to afford [Os(SC6F4H-4)2(SC6F3H-4-O-2)(PPh3)] (4), which also implies a C-F bond cleavage. Single-crystal X-ray diffraction studies of 1, 2, and 4 indicate that these compounds include five-coordinated metal ions in essentially trigonal-bipyramidal geometries, whereas these studies on the paramagnetic compound 3 show a six-coordinated osmium center in a distorted octahedral geometry. 19F, 1H, 31P{1H}, and COSY 19F-19F NMR studies for the diamagnetic 1, 2, and 4 compounds, including variable-temperature 19F NMR experiments, showed that these molecules are fluxional. Some of the activation parameters for these dynamic processes have been determined.     

Unusual addition patterns in trifluoromethylation of [60]fullerene

From pyrolytic trifluoromethylation of [60]fullerene with CF3CO2Ag at 300 degrees C we have isolated ca. sixty C60(CF3)n isomers (numbers in parentheses) as follows: n = 2(1), 4(8), 6(13), 8(21), 10(11), 12(5), 14(4), twenty-one of which have been characterised by 19F NMR. Compounds with addition levels up to n = 20 have also been identified. With increasing value of n, yields decrease and the separation of compounds of similar HPLC retention time but different addend levels becomes more difficult. Many of the 19F NMR spectra show combinations of quartets and septets (the latter tending to be more downfield) due to 'linear' addend arrays. The spectra are consistent with addition across both 6:6- and 5:6-ring junctions [double (1.2) and single (1.6) bonds, respectively], giving corresponding coupling constants for adjacent addends of ca. 14.5 and 12.0 Hz respectively, the differences being attributable to the different 1.2- and 1.6-bond lengths. The 13C NMR spectrum of C60(CF3)2 shows the CF3 groups are in either a 1.4- or 1.6-relationship; the UV-vis band appears at 442 nm. Other unsymmetrical tetra-adducts are comprised of isolated pairs of CF3 groups. The exceptionally large number of derivatives and isomers, (much greater than in any other fullerene reaction), no dominant product, and unusual addition pattern indicates that thermodynamic stability is not of primary importance in governing product formation. EI mass spectrometry of trifluoromethylfullerenes is characterised by loss of CF3 groups, the more highly addended compounds also showing fragmentation by CF2 loss, attributable to steric compression. The CF3 group shows strong IR bands at ca. 1260 and 1190 cm-1. The compounds are stable to aq. acetone, which contrasts to the behaviour of fluorofullerenes. Trifluoromethylation by the Scherer radical (C9F19.) gave addition of up to eight CF3 groups, together with hydrogen in some products. During EI mass spectrometry of some of these, loss of HF attributable to CF3 and H adjacency can occur, giving CF2-containing derivatives.     

Synthesis, structure and theoretical study of mixed fluoro-trifluoromethyl derivatives of C60. Molecular structures of C60F18(CF3)6 and C60F16(CF3)6

A series of novel mixed C60Fn(CF3)m compounds has been produced by trifluoromethylation of C60F18 with CF3I in ampoules at 380-420 degrees C. Two of these compounds, C60F18(CF3)6 and C60F16(CF3)6, have been characterized by X-ray crystallography, which has revealed addition of six CF3 groups to the C3v-C60F18 for the former and replacement/elimination of two outermost F atoms in the latter. Quantum chemical calculations have been employed to predict the most stable possible isomers of C60F16/18(CF3)6 in order to rationalize the experimental results.     

Fused five-membered rings determine the stability of C60F60

The structure and stability of a set of (CF)60 isomers have been computed at the B3LYP/6-31G(d) density functional theory level. The most stable isomer (6, F4@C60F56) has tube-like structure with four endo C-F bonds and fused five-membered rings at the end of the tube, while the reported most stable cage structure (2, F8@C60F52) with eight endo C-F bonds is higher in energy by 22.6 kcal/mol. This is in contrast to the isolated pentagon rule for the stability of fullerenes. The mean bond dissociation energy of 6 is larger than those of the experimental known C60F36, C60F48, and graphite fluoride. The relative energy per CF unit of 6 to graphite fluoride (CF)n is 3.7 kcal/mol, which is smaller than that of C60 fullerene per carbon to graphite (about 9-10 kcal/mol).     

Equilibrium and Kinetics of Bromine Hydrolysis

Equilibrium constants for bromine hydrolysis, K(1) = [HOBr][H(+)][Br(-)]/[Br(2)(aq)], are determined as a function of ionic strength (&mgr;) at 25.0 degrees C and as a function of temperature at &mgr; approximately 0 M. At &mgr; approximately 0 M and 25.0 degrees C, K(1) = (3.5 +/- 0.1) x 10(-)(9) M(2) and DeltaH degrees = 62 +/- 1 kJ mol(-)(1). At &mgr; = 0.50 M and 25.0 degrees C, K(1) = (6.1 +/- 0.1) x 10(-)(9) M(2) and the rate constant (k(-)(1)) for the reverse reaction of HOBr + H(+) + Br(-) equals (1.6 +/- 0.2) x 10(10) M(-)(2) s(-)(1). This reaction is general-acid-assisted with a Br?nsted alpha value of 0.2. The corresponding Br(2)(aq) hydrolysis rate constant, k(1), equals 97 s(-)(1), and the reaction is general-base-assisted (beta = 0.8).     

Isopiestic measurements at high temperatures: I. Aqueous solutions of LiCl,CsCl, and CaCl2 at 155°C

Isopiestic measurements have been made for LiCl (aq) and CsCl (aq) at a temperature of 155°C. Equilibrium molalities ranged up to 21 mol-kg^–1. MgCl₂(aq) was chosen as the reference electrolyte. The apparatus used for the isopiestic experiments is an enhanced version of that developed by Grjotheim and co-workers. To test its precision osmotic coefficients of CaCl₂ (aq) have also been determined and compared with previously reported vapor pressure measurements at high concentrations. The results show a very good coincidence. The data can be described by the ion interaction model of Pitzer. The resulting set of parameters allows a fit of the experimental osmotic coefficients with a standard error of 0.0078 and 0.0114 for LiCl(aq) and CsCl (aq), respectively. The osmotic coefficients of LiCl are consistent with data at lower molalities, but there are discrepancies for the CsCl solutions.     

Structural variation in organically templated uranium sulfate fluorides

The ability of templated uranium sulfate fluorides to adopt diverse inorganic architectures is demonstrated in six novel materials. The inorganic structures present in [N2C6H16][UO2F2(SO4)](USFO-2), [N2C6H16][UO2F(SO4)]2(USFO-3), [N2C3H12][UO2F(SO4)]2.H2O (USFO-4), [N2C5H14][UO2F(H2O)(SO4]2(USFO-5), [N2C6H18]2[UO2F(SO4)]4.H2O (USFO-6) and [N2C3H12][UO2F(SO4)]2.H2O (USFO-7) range from infinite chains to five different layer topologies. The chain, and two of the five layers, have unprecedented structure types. These compounds illustrate the structural diversity within this new family of materials, arising from the varied coordination of the U6+ centres. Each material was synthesised under hydrothermal conditions, through reaction of uranyl acetate, sulfuric acid, HF(aq), water, and the respective organic template.     

Variable-temperature 19F NMR and theoretical study of 1,9- and 1,7-C60F(CF3) and C(s-) and C1-C60F17(CF3): hindered CF3 rotation and through-space J(FF) coupling

Milligram amounts of the new compounds 1,9- and 1,7-C60F(CF3) (ca. 85:15 mixture of isomers) and C60F3(CF3) were isolated from a high-temperature C60/K2PtF6 reaction mixture and purified to 98 mol % compositional purity by two-dimensional high-performance liquid chromatography using Buckyprep and Buckyclutcher columns. The previously observed compounds C60F5(CF3) and C60F7(CF3) were also purified to 90+ mol % for the first time. Variable-temperature 19F NMR spectra of the mixture of C60F(CF3) isomers and the previously reported mixture of C(s)- and C1-C60F17(CF3) isomers demonstrate for the first time that fullerene(F)n(CF3)m derivatives with adjacent F and CF3 substituents exhibit slow-exchange limit hindered CF3 rotation spectra at -40 +/- 10 degrees C. The experimental and density functional theory (DFT) predicted deltaH++ values for CF3 rotation in 1,9-C60F(CF3) are 46.8(7) and 46 kJ mol(-1), respectively. The DFT-predicted deltaH++ values for 1,7-C60F(CF3), C(s)-C60F17(CF3), and C1-C60F17(CF3) are 20, 44, and 54 kJ mol(-1), respectively. The (> or = 4)J(FF) values from the slow-exchange-limit 19F spectra, which vary from ca. 0 to 48(1) Hz, show that the dominant nuclear spin-spin coupling mechanism is through-space coupling (i.e., direct overlap of fluorine atom lone-pair orbitals) rather than coupling through the sigma-bond framework. The 2J(FF) values within the CF3 groups vary from 107(1) to 126(1) Hz. Collectively, the NMR data provide an unambiguous set of (> or = 4)J(FF) values for three different compounds that can be correlated with DFT-predicted or X-ray diffraction derived distances and angles and an unambiguous set of 2J(FF) values that can serve as an internal standard for all future J(FF) calculations.     

Th-C60F24

The regioselective fluorination of Th-C60Br24 with XeF2 in anhydrous HF at 25 degrees C produced Th-C60F24, which is isostructural with Th-C60Br24. The compound, the first example of a fluorofullerene with a noncontiguous pattern of F-bearing sp3 C atoms, was characterized by EI and ESI mass spectrometry and by 19F NMR (single resonance at delta -144 for all 24 F atoms), 13C NMR (two resonances at delta 145.9 (C=C) and delta 83.5 (C-F; JCF = 212 Hz), and FTIR spectroscopy. DFT calculations revealed that at least two other isomers of C60F24 are more stable than Th-C60F24 by >/=280 kJ mol-1, demonstrating that Th-C60F24 is a kinetically stable fluorofullerene.     

Alteration of nC60 in the presence of environmentally relevant carboxylates

C(60) forms colloidally stable nanoscale particles (nC(60)) when mixed with water for extended periods. Past studies have shown that macromolecules such as natural organic matter (NOM) and proteins accelerate nC(60) formation and stabilize the resulting nanoparticles. To better elucidate the mechanisms underlying this behavior, nC(60) was produced via extended mixing in the presence of sodium citrate and other carboxylates. Carboxyl groups are a predominant functional group in many environmentally relevant macromolecules, thus studies examining carboxyl-C(60) interactions are merited. nC(60) produced in the presence of citrate (cit/nC(60)) and other carboxylates differs from nC(60) produced in water alone (aq/nC(60)), exhibiting enhanced negative surface charge, smaller particle size, and different spectroscopic characteristics. Importantly, the simultaneous detection of irregular nC(60) nanoparticles and small, regularly shaped nC(60) suggests that mixing-mediated "top-down" and carboxyl group-mediated "bottom-up" processes occur concurrently when nC(60) is produced in the presence of carboxylates and, by extension, in the presence of carboxylate-containing macromolecules. The "bottom-up" process is expected to involve molecular C(60) or small clusters of C(60) molecules as an important intermediate.     

High resolution EPR spectroscopy of C(60)F and C(70)F in solid argon: reassignment of C(70)F regioisomers

Free radicals C(60)F and C(70)F were generated in solid argon by means of chemical reaction of photogenerated fluorine atoms with isolated fullerene molecules (C(60) or C(70)). High resolution anisotropic electron paramagnetic resonance (EPR) spectra of C(60)F and C(70)F at low temperature have been obtained for the first time. The spectrum of C(60)F is characterized by an axially symmetric hyperfine interaction on (19)F nucleus. The hyperfine coupling constants A(iso)=202.8 MHz (Fermi contact interaction) and A(dip)=51.8 MHz (electron-nuclear magnetic-dipole interaction) have been measured for C(60)F in solid argon. Quantum chemical calculations using hybrid density-functional models (either PBE0 or B3LYP) with high-quality basis sets give a theoretical estimate of the hyperfine coupling constants in good agreement with the measurements. The electron spin density distribution in C(60)F is theoretically characterized using the Hirshfeld atomic partitioning scheme. Unlike C(60), five isomers of C(70)F can in principle be produced by the attachment of a fluorine atom to one of the five distinct carbon atoms of the C(70) molecule (denoted A, B, C, D, and E, from pole to equator). The measured high resolution EPR spectrum of the C(70)+F reaction products is interpreted to show the presence of only three regioisomers of C(70)F. Based on the comparison of the measured hyperfine constants with those estimated by the quantum chemical calculation, an assignment of the spectra to the isomers (A, C, and D) is made, which differs strongly from the previous one [J. R. Morton, K. F. Preston, and F. Negri, Chem. Phys. Lett. 221, 59 (1994)]. The new assignment would allow the conclusion that the low-temperature attachment of F atom to the asymmetric C=C bonds of C(70) molecule, namely, C(A)[Double Bond]C(B) and C(D)=C(E), shows remarkably high selectivity, producing only one of the two isomers in each case, A and D, respectively. Theoretical investigation of the reaction mechanism is made, and it shows that the attachment reaction should have no barrier in the gas phase. The thermodynamic equilibration of the C(70)F isomers is excluded by the high activation energy ( approximately 30 kcal/mol) for the F atom shifts. The explanation of the high selectivity presents a challenge for theoretical modeling.     

Mesoporous Carbons Templated by PEO-PCL Block Copolymers as Electrode Materials for Supercapacitors

In this study, samples of activated mesoporous carbon are fabricated with pore structures with cylinder and gyroid nanostructures through the templating effect of amphiphilic poly(ethylene oxide-block-caprolactone) (PEO-PCL) and by using specific resol/PEO-PCL weight ratios (e.g., 60:40 for cylinders; 55:45 for gyroids). After carbonization and KOH activation, the activated mesoporous carbons were tested as electrode materials for electric double-layer capacitor (EDLC) supercapacitors. The electrochemical properties were examined by using three-electrode (6 m KOH_(aq) as electrolyte) and CR2032 coin-cell (1 m tetraethylammonium tetrafluoroborate (TEABF₄)/CN as the electrolyte) systems. The gyroid carbon samples provided specific capacitances higher than those of the cylinder carbon samples in both aqueous and organic systems: 155 F g⁻¹ compared with 135 F g⁻¹ in 6 m KOH_(aq), and 105.6 compared with 96 F g⁻¹ in 1 m TEABF₄/MeCN, after 100 charge/discharge cycles. It is suspected that the bi-continuous mesochannels of the gyroid-type activated mesoporous carbons provided a relatively higher effective adsorption surface area; in other words, the greater surface area for energy storage originated from a moderate pore size and an interconnected pore structure.     

Recombination of the hydrated electron at high temperature and pressure in hydrogenated alkaline water

Pulse radiolysis experiments were performed on hydrogenated, alkaline water at high temperatures and pressures to obtain rate constants for the reaction of hydrated electrons with hydrogen atoms (H* + e-(aq) --> H(2) + OH-, reaction 1) and the bimolecular reaction of two hydrated electrons (e-(aq) + e-(aq) --> H(2) + 2 OH-, reaction 2). Values for the reaction 1 rate constant, k(1), were obtained from 100 - 325 degrees C, and those for the reaction 2 rate constant, k(2), were obtained from 100 - 250 degrees C, both in increments of 25 degrees C. Both k(1) and k(2) show non-Arrhenius behavior over the entire temperature range studied. k(1) shows a rapid increase with increasing temperature, where k(1) = 9.3 x 10(10) M(-1) s(-1) at 100 degrees C and 1.2 x 10(12) M(-1) s(-1) at 325 degrees C. This behavior is interpreted in terms of a long-range electron-transfer model, and we conclude that e-aq diffusion has a very high activation energy above 150 degrees C. The behavior of k(2) is similar to that previously reported, reaching a maximum value of 5.9 x 10(10) M(-1) s(-1) at 150 degrees C in the presence of 1.5 x 10(-3) m hydroxide. At higher temperatures, the value of k(2) decreases rapidly and above 250 degrees C is too small to measure reliably. We suggest that reaction 2 is a two-step reaction, where the first step is a proton transfer stimulated by the proximity of two hydrated electrons, followed immediately by reaction 1.