Biostimulation-enhanced Biodegradation of Nitrobenzene in Contaminated Groundwater

In this study, biostimulation technology was used for bioremediation of nitrobenzene-contaminated groundwater by adding a mixture of lactose and phosphate, peptone, and beef extract. During the process of biostimulation, the remediation effectiveness, microbial dehydrogenase activities and microbial densities were investigated; the varieties of microbial community structure and composition were analyzed by polymerase chain reaction-denaturing gradient gel electrophoresis(PCR-DGGE) technique and the relative abundances of nitrobenzene-degrading gene(nbzA) were determined by fluorescence quantitative real-time PCR(RT-PCR). Findings show that the removal rate of nitrobenzene in groundwater could reach about 60% by biostimulation with lactose and phosphate, 70% with peptone and 68% with beef extract. The microbial dehydrogenase activities and microbial densities were all improved obviously via biostimulation. The results of PCR-DGGE show that the microbial diversities were improved, and more than ten kinds of dominant microorganisms were detected after biostimulation. RT-PCR results show that the relative abundances of nbzA gene of microbes in groundwater were increased significantly, which indicated that biostimulation actually enhanced the growth of nitrobenzene-degrading bacteria. Therefore, biostimulation is a cost-effective and feasible bioremediation technique for nitrobenzene-contaminated groundwater.     

Determination of sulphur in uranium matrix by total reflection X-ray fluorescence spectrometry

The possibility of sulphur determination in uranium matrix by total reflection x-ray fluorescence spectrometry (TXRF) has been studied. Calibration solutions and samples of sulphur in uranium matrix were prepared by mixing uranium in form of a standard uranyl nitrate solution and sulphur in the form of Na₂SO₄ standard solution, prepared by dissolving Na₂SO₄ in Milli-Q water. For major element analysis of sulphur, it was determined without separation of uranium whereas for the trace level determinations, uranium was first separated by solvent extraction using 30% tri-n-butyl phosphate (TBP) in dodecane as an extractant. In order to countercheck the TXRF results, a few samples of Rb₂U(SO₄)₃, a chemical assay standard for uranium, were diluted to different dilutions and sulphur content in these solutions were determined. The TXRF determined results for trace determinations of sulphur in these diluted solutions were counterchecked after addition of another uranium solution, so that sulphur is at trace level compared to uranium, separating uranium from these solution mixtures using TBP extraction and determining sulphur in aqueous phase by TXRF. For such TXRF determinations, Co was used as internal standard and W Lα was used as excitation source. The precision and accuracy of the method was assessed for trace and major element determinations and was found to be better than 8% (1σ RSD) and 15% at a concentration level of 1 μg/mL of sulphur measured in solutions whereas for Rb₂U(SO₄)₃, these values were found to be better than 4 and 13%, respectively.     

Substoichiometric isotope-dilution determination of sulphur after conversion to methylene blue and ion-pair extraction with dodecyl sulphate

The proposed substoichiometric determination of sulphur includes two key steps: conversion of sulphur to methylene blue and ion-pair extraction of methylene blue into chloroform with a substoichiometric amount of dodecyl sulphate. The method, combined with isotope dilution is applied to the determination of total sulphur in NBS SRM Citrus Leaves and in a seaweed sample (Laminaria religiosa Miyabe). The mean values obtained were 0.401±0.008% S (RSD 2%; n=9; certified value 0.407±0.009%) for the SRM, and 0.756±0.012% S (RSD 1.6%; n=5) for the seaweed. A sample of 0.5–1 g containing ca. 100 μg of sulphur can be analysed.     

Biological Removal of Phosphate at Low Concentrations Using Recombinant Escherichia coli Expressing Phosphate-Binding Protein in Periplasmic Space

During wastewater treatment, phosphate removal is an important and challenging process; thus, diverse technologies, including those derived from biological means, have been devised for efficient phosphate removal. Although conventional biological methods are effective in decreasing wastewater phosphate levels to ~1 mg/L, long periods of microbial adaptation are required for effective phosphate removal, and the removal efficiency of these methods is relatively poor at lower phosphate concentrations. In the present work, we constructed a recombinant Escherichia coli with periplasmic-expressed phosphate-binding protein (PBP) and investigated its biological removal ability for low phosphate levels. We found that the PBP-expressing recombinant E. coli cells showed efficient (> 94 %) removal of phosphate at low concentrations (0.2–1.0 mg/L) in a treated cell mass-dependent manner. Collectively, we propose that our PBP-expressing recombinant whole-cell system could be successfully used during wastewater treatment for the biological removal of low concentrations of phosphate.     

Population Analysis of Mesophilic Microbial Fuel Cells Fed with Carbon Monoxide

Electricity generation in a microbial fuel cell (MFC) fed with carbon monoxide (CO) has been recently demonstrated; however, the microbial ecology of this system has not yet been described. In this work the diversity of the microbial community present at the anode of CO-fed MFCs was studied by performing denaturing gradient gel electrophoresis (DGGE) and high-throughput sequencing (HTS) analyses. HTS indicated a significant increase of the archaeal genus Methanobacterium and of the bacterial order Clostridiales, notably including Clostridium species, while in both MFCs DGGE identified members of the bacterial genera Geobacter, Desulfovibrio, and Clostridium, and of the archaeal genera Methanobacterium, Methanofollis, and Methanosaeta. In particular, the presence of Geobacter sulfurreducens was identified. Tolerance of G. sulfurreducens to CO was confirmed by growing G. sulfurreducens with acetate under a 100 % CO atmosphere. This observation, along with the identification of acetogens, supports the hypothesis of the two-step process in which CO is converted to acetate by the carboxidotrophic Bacteria and acetate is then oxidized by CO-tolerant electricigenic Bacteria to produce electricity.     

Screening and Comparison of Lignin Degradation Microbial Consortia from Wooden Antiques

Lignin, which is a component of wood, is difficult to degrade in nature. However, serious decay caused by microbial consortia can happen to wooden antiques during the preservation process. This study successfully screened four microbial consortia with lignin degradation capabilities (J-1, J-6, J-8 and J-15) from decayed wooden antiques. Their compositions were identified by genomic sequencing, while the degradation products were analyzed by GC-MS. The lignin degradation efficiency of J-6 reached 54% after 48 h with an initial lignin concentration of 0.5 g/L at pH 4 and rotation speed of 200 rpm. The fungal consortium of J-6 contained Saccharomycetales (98.92%) and Ascomycota (0.56%), which accounted for 31% of the total biomass. The main bacteria in J-6 were Shinella sp. (47.38%), Cupriavidus sp. (29.84%), and Bosea sp. (7.96%). The strongest degradation performance of J-6 corresponded to its composition, where Saccharomycetales likely adapted to the system and improved lignin degradation enzymes activities, and the abundant bacterial consortium accelerated lignin decomposition. Our work demonstrated the potential utilization of microbial consortia via the synergy of microbial consortia, which may overcome the shortcomings of traditional lignin biodegradation when using a single strain, and the potential use of J-6 for lignin degradation/removal applications.     

Bioconversion of Corncob Acid Hydrolysate into Microbial Oil by the Oleaginous Yeast Lipomyces starkeyi

For the first time, corncob acid hydrolysate was used for microbial oil production by the oleaginous yeast Lipomyces starkeyi. After hydrolysis by dilute sulfuric acid, corncob could turn into an acid hydrolysate with a sugar concentration of about 42.3 g/L. Detoxified by overliming and absorption with activated carbon, the corncob hydrolysate could be used by L. starkeyi efficiently that a total biomass of 17.2 g/L with a lipid content of 47.0 % (corresponding to a lipid yield of 8.1 g/L) and a lipid coefficient of 20.9 could be obtained after cultivation on the corncob hydrolysate for 8 days. Therefore, L. starkeyi is a promising strain for microbial oil production from lignocellulosic biomass. Glucose and xylose were used by L. starkeyi simultaneously during lipid fermentation while arabinose could not be utilized by it. Besides, the lipid composition of L. starkeyi was similar to that of vegetable oils; thus, it is a promising feedstock for biodiesel production.     

Identification des allotropes S6 et S7 du soufre dans le trophosome du vestimentifère Riftia pachyptila

The two sulphur allotropes S₆ and S₇ were characterised by gas chromatography/mass spectrometry coupling experiments in trophosomes of Riftia pachyptila (Vestimentifera), which inhabit hydrothermal vents. Both allotropes (approximately 3% for both) are associated with the usual form S₈ that represents about 97% of the total sulphur fraction. These new natural varieties of sulphur could be due to bacterial oxidation of hydrogen sulphide in extreme conditions (about 300 kg cm^–2). However, the occurrence of the same allotropes in mineral sulphur from different origin, terrestrial and extraterrestrial as well, could indicate that natural sulphur is a mixture of these three allotropes, with proportions depending on its geographical origin.     

Development of new rat monoclonal antibodies with different selectivities and sensitivities for 2,4,6-trinitrotoluene (TNT) and other nitroaromatic compounds

Five new rat monoclonal antibodies (mAbs) for 2,4,6-trinitrotoluene (TNT) and other nitroaromatic compounds, including, especially, the metabolite 2-amino-4,6-dinitrotoluene (2-ADNT), are described. Five heterogeneous, competitive enzyme-linked immunosorbent assays (ELISAs) were developed. Assay 1 uses mAb DNT4 3F6 as recognition element and gives a standard curve for TNT in 40 mmol L^–1 phosphate buffered saline (PBS) with a test midpoint (IC₅₀) of 0.26±0.08 g L^–1 (n=20). Assay 2 (mAb DNT4 4G4) has an IC₅₀ of 0.35±0.07 g L^–1 (n=18), assay 3 (mAb DNT4 1A3) has an IC₅₀ of 0.73±0.14 g L^–1 (n=15), and assay 4 (mAb DNT4 1A7) has an IC₅₀ of 2.32±0.70 g L^–1 (n=15). Assay 5 (mAb DNT2 4B4) is very selective for 2-ADNT and has an IC₅₀ of 8.5±1.7 g L^–1 (n=15) in PBS. These antibodies for nitroaromatic compounds differ not only in their sensitivity but also in their selectivity. Major cross-reactants are 1,3,5-trinitrobenzene, 2-ADNT, 4-amino-2,6-dinitrotoluene (4-ADNT), 2,4-dinitroaniline, 3,5-dinitroaniline, and 2,6-dinitroaniline. Although assay 5 is not highly sensitive, the mAb DNT2 4B4 in this assay is highly selective for 2-ADNT. Of all the compounds tested, only 2,4-dinitroaniline and 3,5-dinitroaniline had relevant cross reactivities, 18% and about 26%, respectively. Two ELISAs, using mAbs DNT4 3F6 and DNT2 4B4, were used to analyze different concentrations of TNT and 2-ADNT, respectively, in three different surface water matrices (river and lake water). Both assays were affected by the matrix, but usually performed well (recovery within the range 70–120%). In addition, these ELISAs were used to analyze mixtures of TNT, 2-ADNT, and 4-ADNT, at three different concentrations, in the same water matrices. A different recognition pattern was clearly visible with both assays and depended on the cross reactivities of the corresponding mAb.Dedicated to the memory of Wilhelm Fresenius     

Production of Microbial Surfactants from Oily Sludge-Contaminated Soil by Bacillus subtilis DSVP23

The indigenous microbial community utilizing aliphatic, aromatic, and polar components from the oily sludge as sole source of carbon and energy was selected from the soil samples of Ankleshwar, India for biosurfactant production. Evaluation of biosurfactant production was done using screening assays such as surface tension reduction, hemolytic activity, emulsification activity, drop-collapse assay, and cell surface hydrophobicity studies. Maximum biosurfactant (6.9?g/l) production was achieved after 5?days of growth from Bacillus subtilis DSVP23 which was identified by 16S RNA technique (NCBI GenBank accession no. EU679368). Composition of biosurfactant showed it to be lipopeptide in nature with 15.2% protein content and 18.0% lipid content. Functional group analysis was also done by using Fourier transform infrared spectroscopy which showed it to be a protein-bound lipid thereby imparting them special properties. Analysis by matrix-assisted laser desorption/ionization time-of-flight mass spectrometric and nuclear magnetic resonance revealed that the major constituents of lipopeptide are leucine and isoleucine. Gas chromatographic analysis data indicated that oily sludge components of chain length C₁₂?CC₃₀ and aromatic hydrocarbons were degraded effectively by B. subtilis DSVP23 after 5?days of incubation. These results collectively points toward the importance of B. subtilis DSVP23 as a potential candidate for bioremediation studies.     

The Raw Milk Microbiota from Semi-Subsistence Farms Characteristics by NGS Analysis Method

The aim of this study was to analyze the microbiome of raw milk obtained from three semi-subsistence farms (A, B, and C) located in the Kuyavian-Pomeranian Voivodeship in Poland. The composition of drinking milk was assessed on the basis of 16S rRNA gene sequencing using the Ion Torrent platform. Based on the conducted research, significant changes in the composition of the milk microbiome were found depending on its place of origin. Bacteria belonging to the Bacillus (17.0%), Corynebacterium (12.0%) and Escherichia-Shigella (11.0%) genera were dominant in the milk collected from farm A. In the case of the milk from farm B, the dominant bacteria belonged to the Acinetobacter genus (21.0%), whereas in the sample from farm C, Escherichia-Shigella (24.8%) and Bacillus (10.3%) dominated the microbiome. An analysis was performed using the PICRUSt tool (Phylogenetic Investigation of Communities by Reconstruction of Unobserved States) in order to generate a profile of genes responsible for bacterial metabolism. The conducted analysis confirmed the diversity of the profile of genes responsible for bacterial metabolism in all the tested samples. On the other hand, simultaneous analysis of six KEGG Orthologs (KO), which participated in beta-lactam resistance responsible for antibiotic resistance of bacteria, demonstrated that there is no significant relationship between the predicted occurrence of these orthologs and the place of existence of microorganisms. Therefore, it can be supposed that bacterial resistance to beta-lactam antibiotics occurs regardless of the environmental niche, and that the antibiotic resistance maintained in the population is a factor that shapes the functional structure of the microbial consortia.     

Effects of Nitrate Injection on Microbial Enhanced Oil Recovery and Oilfield Reservoir Souring

Column experiments were utilized to investigate the effects of nitrate injection on sulfate-reducing bacteria (SRB) inhibition and microbial enhanced oil recovery (MEOR). An indigenous microbial consortium collected from the produced water of a Brazilian offshore field was used as inoculum. The presence of 150 mg/L volatile fatty acids (VFA´s) in the injection water contributed to a high biological electron acceptors demand and the establishment of anaerobic sulfate-reducing conditions. Continuous injection of nitrate (up to 25 mg/L) for 90 days did not inhibit souring. Contrariwise, in nitrogen-limiting conditions, the addition of nitrate stimulated the proliferation of δ-Proteobacteria (including SRB) and the associated sulfide concentration. Denitrification-specific nirK or nirS genes were not detected. A sharp decrease in water interfacial tension (from 20.8 to 14.5 mN/m) observed concomitantly with nitrate consumption and increased oil recovery (4.3 % v/v) demonstrated the benefits of nitrate injection on MEOR. Overall, the results support the notion that the addition of nitrate, at this particular oil reservoir, can benefit MEOR by stimulating the proliferation of fortuitous biosurfactant-producing bacteria. Higher nitrate concentrations exceeding the stoichiometric volatile fatty acid (VFA) biodegradation demands and/or the use of alternative biogenic souring control strategies may be necessary to warrant effective SRB inhibition down gradient from the injection wells.     

Effects of Turning Frequency on Ammonia Emission during the Composting of Chicken Manure and Soybean Straw

Here, we investigated the impact of different turning frequency (TF) on dynamic changes of N fractions, NH₃ emission and bacterial/archaeal community during chicken manure composting. Compared to higher TF (i.e., turning every 1 or 3 days in CMS1 or CMS3 treatments, respectively), lower TF (i.e., turning every 5 or 7 days in CMS5 or CMS7 treatments, respectively) decreased NH₃ emission by 11.42–18.95%. Compared with CMS1, CMS3 and CMS7 treatments, the total nitrogen loss of CMS5 decreased by 38.03%, 17.06% and 24.76%, respectively. Ammonia oxidizing bacterial/archaeal (AOB/AOA) communities analysis revealed that the relative abundance of Nitrosospira and Nitrososphaera was higher in lower TF treatment during the thermophilic and cooling stages, which could contribute to the reduction of NH₃ emission. Thus, different TF had a great influence on NH₃ emission and microbial community during composting. It is practically feasible to increase the abundance of AOB/AOA through adjusting TF and reduce NH₃ emission the loss of nitrogen during chicken manure composting.     

Production of nisin by Lactococcus lactis in media with skimmed milk

Nisin is a bacteriocin that inhibits the germination and growth of Gram-positive bacteria. With nisin expression related to growth conditions of Lactococcus lactis subsp. lactis, the effects of growth parameters, media components, and incubation time were studied to optimize expression. L. lactis ATCC 11454 was grown (100 rpm at 30°C for 36 h) in both M17 and MRS standard broth media (pH 6.0–7.0) supplemented with sucrose (1.0–12.5 g/L), potassium phosphate (0.13 g/L), asparagine (0.5 g/L), and sucrose (0.24 g/L), and diluted 1:1 with liquid nonfat milk. Liquid nonfat milk, undiluted, was also used as another medium (9% total solids, pH 6.5). Nisin production was assayed by agar diffusion using Lactobacillus sake ATCC 15521 (30°C for 24 h) as the sensitive test organism. The titers of nisin expressed and released in culture media were quantified and expressed in arbitrary units (AU/L of medium) and converted into known concentrations of “standard nisin” (Nisaplin®, g/L). The detection of nisin activity was <0.01 AU/L in M17 and MRS broths, and 7.5 AU/L in M17 with 0.14% sucrose or 0.13% other supplements, and the activity increased to 142.5 AU/L in M17 diluted with liquid nonfat milk (1:1). The 25% milk added to either 25% M17 or 25% MRS provided the highest levels of nisin assayed.     

Intrinsic Characteristics of Cr6+-Resistant Bacteria Isolated from an Electroplating Industry Polluted Soils for Plant Growth-Promoting Activities

The Cr⁶⁺-resistant plant growth-promoting bacteria was isolated from soil samples that were collected from an electroplating industry at Coimbatore, India, that had tolerated chromium concentrations up to 500?mg Cr⁶⁺/L in Luria-Bertani medium. Based on morphology, physiology, and biochemical characteristics, the strain was identified as Bacillus sp. following the Bergey's manual of determinative bacteriology. Evaluation of plant growth-promoting parameters has revealed the intrinsic ability of the strain for the production of indole-3-acetic acid (IAA), siderophore, and solubilization of insoluble phosphate. Bacillus sp. have utilized tryptophan as a precursor for their growth and produced IAA (122???g/mL). Bacillus sp. also exhibited the production of siderophore that was tested qualitatively using Chrome Azurol S (CAS) assay solution and utilized the insoluble tricalcium phosphate as the sole source of phosphate exhibiting higher rate of phosphate solubilization after 72?h of incubation (1.45???g/mL). Extent of Cr⁶⁺ uptake and accumulation of Cr⁶⁺ in the cell wall of Bacillus sp. was investigated using atomic absorption spectrophotometer and scanning electron microscope-energy dispersive spectroscopy, respectively. The congenital capability of this Cr⁶⁺-resistant plant growth-promoting Bacillus sp. could be employed as bacterial inoculum for the improvement of phytoremediation in heavy metal contaminated soils.     

Enhanced Production of Bacterial Cellulose by Using Gluconacetobacter hansenii NCIM 2529 Strain Under Shaking Conditions

Bacterial cellulose (BC), a biopolymer, due to its unique properties is valuable for production of vital products in food, textile, medicine, and agriculture. In the present study, the optimal fermentation conditions for enhanced BC production by Gluconacetobacter hansenii NCIM 2529 were investigated under shaking conditions. The investigation on media components and culture parameters revealed that 2 % (w/v) sucrose as carbon source, 0.5 % (w/v) potassium nitrate as nitrogen source, 0.4 % (w/v) disodium phosphate as phosphate source, 0.04 % (w/v) magnesium sulfate, and 0.8 % (w/v) calcium chloride as trace elements, pH?5.0, temperature 25 °C, and agitation speed 170 rpm with 6 days of fermentation period are optimal for maximum BC production. Production of BC using optimized media components and culture parameters was 1.66 times higher (5.0 g/l) than initial non optimized media (3.0 g/l). Fourier transform infrared spectroscopy spectrum and comparison with the available literature suggests that the produced component by G. hansenii in the present study is pure bacterial cellulose. The specific action of cellulase out of the investigated hydrolytic enzymes (cellulase, amylase, and protease) further confirmed purity of the produced BC. These findings give insight into conditions necessary for enhanced production of bacterial cellulose, which can be used for a variety of applications.     

Bacterial Diversity Correlates with Overall Survival in Cancers of the Head and Neck,Liver, and Stomach

One in five cancers is attributed to infectious agents, and the extent of the impact on the initiation, progression, and disease outcomes may be underestimated. Infection-associated cancers are commonly attributed to viral, and to a lesser extent, parasitic and bacterial etiologies. There is growing evidence that microbial community variation rather than a single agent can influence cancer development, progression, response to therapy, and outcome. We evaluated microbial sequences from a subset of infection-associated cancers—namely, head and neck squamous cell carcinoma (HNSC), liver hepatocellular carcinoma (LIHC), and stomach adenocarcinoma (STAD) from The Cancer Genome Atlas (TCGA). A total of 470 paired tumor and adjacent normal samples were analyzed. In STAD, concurrent presence of EBV and Selemonas sputigena with a high diversity index were associated with poorer survival (HR: 2.23, 95% CI 1.26–3.94, p = 0.006 and HR: 2.31, 95% CI 1.1–4.9, p = 0.03, respectively). In LIHC, lower microbial diversity was associated with poorer overall survival (HR: 2.57, 95% CI: 1.2, 5.5, p = 0.14). Bacterial within-sample diversity correlates with overall survival in infection-associated cancers in a subset of TCGA cohorts.     

Simultaneous determination of nitroaromatic compounds in water using capillary electrophoresis with amperometric detection on an electrode modified with a mesoporous nano‐structured carbon material

In this article, a carbon disk electrode modified with mesoporous carbon material (CMK‐3) was used in CE with amperometric detection system for the simultaneous determination of four types of important nitroaromatic compounds, including 2,4,6‐trinitrotoluene (TNT), 1,3,5‐trinitrobenzene (TNB), 2,4‐dinitrotoluene (DNT) and 1,3‐dinitrobenzene (DNB). Compared with the bare carbon electrode, the CMK‐3 modified electrode greatly improved the sensitivity at a relatively positive detection potential due to its excellent electrocatalytic activities, high conductivity and large effective surface area. The four analytes could be well separated and detected within 480 s. A good linear response was obtained for TNB, DNB, TNT and DNT from 8.4 to 5.0×10³ μg/L, with correlation coefficients higher than 0.9992. And the detection limits were established between 3.0 and 4.7 μg/L for the four investigated nitroaromatic compounds (S/N=3). The CMK‐3‐modified electrode was successfully employed to analyze coking wastewater, tap water and river samples with recoveries in the range of 94.8–109.0%, and RSDs less than 5.0%. The presented results demonstrated that the CMK‐3‐modified carbon electrode used in CE with amperometric detection was of convenient preparation, high sensitivity and good repeatability, which could be employed in the rapid determination of practical samples.     

GC–MS analysis and anti–microbial activity of Prunella vulgaris L. extracts

In this study, the chemical composition of the methanol, hexane and ethyl acetate extracts of Prunella vulgaris L. were investigated by gas chromatography–mass spectrometry (GC–MS) method. 2-hydroxy-5-methylbenzaldehyde (15.70%), linolenic acid (45.50%) and icosane (16.24%) were found to be the most abundant in methanol, hexane and ethyl acetate extracts, respectively. Following the determination of chemical components of the Prunella vulgaris L. extracts, their anti–microbial activities against certain human pathogenic bacteria were tested and minimal inhibitory concentrations (MIC) were determined. While some extracts of Prunella vulgaris L. show anti–microbial activity well above the standards (penicillin and tetracycline), it was determined that in general all the extracts showed good anti–microbial activity against these pathogenic bacteria.     

Biosynthesis of Benzoylformic Acid from Benzoyl Cyanide with a New Bacterial Isolate of Brevibacterium sp. CCZU12-1

Brevibacterium sp. CCZU12-1 with high nitrilase activity could effectively hydrolyze benzoyl cyanide into benzoylformic acid. After the culture optimization, the preferred carbon sources, nitrogen sources, and inducer were glucose (10 g/L), a composite of peptone (10 g/L) plus yeast extract (2.5 g/L), and ε-caprolactam (2.0 mM), respectively. After the reaction optimization, the optimum reaction temperature, reaction pH, organic cosolvent, and metal ion were 30 °C, 7.0, ethanol (2 %, v/v), and Ca²⁺ (0.1 mM), respectively. At biotransformation of 120-mM benzoyl cyanide for 24 h, the yield of benzoylformic acid reached 91.8 %. Moreover, the microbial nitrilase from Brevibacterium sp. CCZU12-1 could hydrolyze various nitriles, and it significantly exhibited high nitrilase activity against benzoyl cyanide, 3-cyanopyridine, and α-cyclohexyl-mandelonitrile.