Amphiphilic ionic liquid stabilizing palladium nanoparticles for highly efficient catalytic hydrogenation

The highly water-soluble palladium nanoparticles (NPs) were synthesized by using the amphiphilic poly(ethylene glycol)-functionalized dicationic imidazolium-based ionic liquid (C(12)Im-PEG IL) as a stabilizing agent. The aqueous dispersed palladium NPs in the range of 1.9 ± 0.3 nm were observed by transmission electron microscopy (TEM). The physicochemical properties of C(12)Im-PEG IL in aqueous phase have been characterized by electrical conductivity, surface tension and dynamic light scattering (DLS) measurements. It was demonstrated that the amphiphilic ionic liquid can form micelles above its critical micelle concentration (CMC) in aqueous solution and the micelles played a crucial role in stabilizing the palladium NPs and thus promoted catalytic hydrogenation. Furthermore, the dicationic ionic liquid can also act as a gemini surfactant and generated emulsion between hydrophobic substrates and the catalytic aqueous phase during the reaction. The aqueous dispersed palladium NPs showed efficient activity for the catalytic hydrogenation of various substrates under very mild conditions and the stabilizing Pd(0) nanoparticles (NPs) can be reused at least eight times with complete conservation of activity.     

Cu Nanoparticles Electrodeposited at Liquid–Liquid Interfaces: A Highly Efficient Catalyst for the Hydrogen Evolution Reaction

The electrochemical deposition of Cu nanoparticles with an average diameter of approximately 25–35 nm has been reported at liquid–liquid interfaces by using the organic‐phase electron‐donor decamethylferrocene (DMFc). The electrodeposited Cu nanoparticles display excellent catalytic activity for the hydrogen evolution reaction (HER); this is the first reported catalytic effect of Cu nanoparticles at liquid–liquid interfaces.     

Nanoscale Pt(0) particles prepared in imidazolium room temperature ionic liquids: synthesis from an organometallic precursor,characterization, and catalytic properties in hydrogenation reactions

The reaction of Pt(2)(dba)(3) (dba = bis-dibenzylidene acetone) dispersed in room temperature 1-n-butyl-3-methylimidazolium (BMI) hexafluorophosphate ionic liquid with molecular hydrogen (4 atm) at 75 degrees C leads to stable and isolable nanometric Pt(0) particles. The X-ray diffraction analysis (XRD) of the material indicated that it is constituted of Pt(0). Transmission electron microscopy (TEM) analysis of the particles dispersed in the ionic liquid shows the formation of [Pt(0)](n) nanoparticles of 2.0-2.5 nm in diameter. A detailed examination of the nanoparticles imbibed in the ionic liquid and their environment shows an interaction of the BMI.PF(6) ionic liquid with the Pt(0) nanoparticles. The isolated [Pt(0)](n) nanoparticles can be redispersed in the ionic liquid or in acetone or used in solventless conditions for liquid-liquid biphasic, homogeneous, or heterogeneous hydrogenation of alkenes and arenes under mild reaction conditions (75 degrees C and 4 atm). The recovered platinum nanoparticles can be reused as a solid or redispersed in the ionic liquid several times without any significant loss in catalytic activity.     

Recycling nanoparticles stabilized in water-in-CO2 microemulsions for catalytic hydrogenations

Catalytic hydrogenations of olefins took place effectively in supercritical CO2 with Pd0 nanoparticles dispersed in the fluid phase using a water-in-CO2 microemulsion consisting of water, sodium bis(2-ethylhexyl) sulfosuccinate (AOT) as a surfactant, and 1-octanol as a cosolvent. The hydrogenated products dissolved in supercritical CO2 can be separated from the octanol solution containing AOT microemulsions with Pd0 nanoparticles by phase separation (upper phase, supercritical CO2 with hydrogenated products; lower phase, 1-octanol containing AOT microemulsions with Pd0 nanoparticles) accompanied by reduction of CO2 pressure. After collecting the hydrogenated products by flowing the upper CO2 phase to a collection vessel, the Pd0 nanoparticles remaining in the lower phase can be redispersed into supercritical CO2 by pressurizing the system to a pressure where a homogeneous phase is attained. The redispersed nanoparticles can be reused as catalysts for the next runs of the hydrogenations. Triphenylethylene was hydrogenated to 1,1,2-triphenylethane at conversions of 100% (1st-3rd runs), >99% (4th run), and >96% (5th run) using the recycled Pd0 nanoparticles. The feasibility of using other organic solvents as cosolvents is also studied in the present paper.     

Nanoscale Ru(0) particles: arene hydrogenation catalysts in imidazolium ionic liquids

The reduction of [Ru(COD)(2-methylallyl) 2] (COD = 1,5-cyclooctadiene) dispersed in various room-temperature ionic liquids (ILs), namely, 1- n-butyl-3-methylimidazolium (BMI) and 1- n-decyl-3-methylimidazolium (DMI), associated with the N-bis(trifluoromethanesulfonyl)imidates (NTf 2) and the corresponding tetrafluoroborates (BF 4) with hydrogen gas (4 bar) at 50 degrees C leads to well-dispersed immobilized nanoparticles. Transmission electron microscopy (TEM) analysis of the particles dispersed in the ionic liquid shows the presence of [Ru(0)] n nanoparticles (Ru-NPs) of 2.1-3.5 nm in diameter. Nanoparticles with a smaller mean diameter were obtained in the ILs containing the less coordinating anion (NTf 2) than that in the tetrafluoroborate analogues. The ruthenium nanoparticles in ionic liquids were used for liquid-liquid biphasic hydrogenation of arenes under mild reaction conditions (50-90 degrees C and 4 bar). The apparent activation energy of E A = 42.0 kJ mol (-1) was estimated for the hydrogenation of toluene in the biphasic liquid-liquid system with Ru-NPs/BMI.NTf 2. TEM analysis of the ionic liquid material after the hydrogenation reactions shows no significant agglomeration of the [Ru(0)] n nanoparticles. The catalyst ionic liquid phase can be reused several times without a significant loss in catalytic activity.     

Surface catalysed Suzuki-Miyaura cross-coupling by Pd nanoparticles: an operando XAS study

Size-controlled, catalytically active PVP-stabilised Pd nanoparticles have been studied by operando liquid phase XAS during the Suzuki cross-coupling of iodonanisole and phenylboronic acid in MeOH-toluene using KOMe base. XAS reveals nanoparticles are stable to metal leaching throughout the reaction, with surface density Pd defect sites directly implicated in the catalytic cycle. The efficacy of popular selective chemical and structural poisons for distinguishing heterogeneous and homogeneous contributions in Pd catalysed cross-couplings is also explored.     

The use of imidazolium ionic liquids for the formation and stabilization of ir0 and rh0 nanoparticles: efficient catalysts for the hydrogenation of arenes

Stable transition-metal nanoparticles of the type [M(0)](n) are easily accessible through the reduction of Ir(I) or Rh(III) compounds dissolved in "dry" 1-n-butyl-3-methylimidazolium hexafluorophosphate ionic liquid by molecular hydrogen. The formation of these [M(0)](n) nanoparticles is straightforward; they are prepared in dry ionic liquid whereas the presence of the water causes the partial decomposition of ionic liquid with the formation of phosphates, HF and transition-metal fluorides. Transmission electron microscopy (TEM) observations and X-ray diffraction analysis (XRD) show the formation of [Ir(0)](n) and [Rh(0)](n) nanoparticles with 2.0-2.5 nm in diameter. The isolated [M(0)](n) nanoparticles can be redispersed in the ionic liquid, in acetone or used in solventless conditions for the liquid-liquid biphasic, homogeneous or heterogeneous hydrogenation of arenes under mild reaction conditions (75 degrees C and 4 atm). The recovered iridium nanoparticles can be reused several times without any significant loss in catalytic activity. Unprecedented total turnover numbers (TTO) of 3509 in 32 h, for arene hydrogenation by nanoparticles catalysts, have been achieved in the reduction of benzene by the [Ir(0)](n) in solventless conditions. Contrarily, the recovered Rh(0) nanoparticles show significant agglomeration into large particles with a loss of catalytic activity. The hydrogenation of arenes containing functional groups, such as anisole, by the [Ir(0)](n) nanoparticles occurs with concomitant hydrogenolysis of the C-O bond, suggesting that these nanoparticles behave as "heterogeneous catalysts" rather than "homogeneous catalysts".     

The partial hydrogenation of benzene to cyclohexene by nanoscale ruthenium catalysts in imidazolium ionic liquids

The controlled decomposition of an Ru(0) organometallic precursor dispersed in 1-n-butyl-3-methylimidazolium hexafluorophosphate (BMI.PF(6)), tetrafluoroborate (BMI.BF(4)) or trifluoromethane sulfonate (BMI.CF(3)SO(3)) ionic liquids with H(2) represents a simple and efficient method for the generation of Ru(0) nanoparticles. TEM analysis of these nanoparticles shows the formation of superstructures with diameters of approximately 57 nm that contain dispersed Ru(0) nanoparticles with diameters of 2.6+/-0.4 nm. These nanoparticles dispersed in the ionic liquids are efficient multiphase catalysts for the hydrogenation of alkenes and benzene under mild reaction conditions (4 atm, 75 degrees C). The ternary diagram (benzene/cyclohexene/BMI.PF(6)) indicated a maximum of 1 % cyclohexene concentration in BMI.PF(6), which is attained with 4 % benzene in the ionic phase. This solubility difference in the ionic liquid can be used for the extraction of cyclohexene during benzene hydrogenation by Ru catalysts suspended in BMI.PF(6). Selectivities of up to 39 % in cyclohexene can be attained at very low benzene conversion. Although the maximum yield of 2 % in cyclohexene is too low for technical applications, it represents a rare example of partial hydrogenation of benzene by soluble transition-metal nanoparticles.     

Transition-metal nanoparticles in imidazolium ionic liquids: recyclable catalysts for biphasic hydrogenation reactions

1-n-Butyl-3-methylimidazolium hexafluorophosphate room-temperature ionic liquid is not only suitable as a medium for the preparation and stabilization of iridium nanoparticles but also ideal for the generation of recyclable biphasic catalytic systems for hydrogenation reactions. Thus, Ir(0) nanoparticles with a mean diameter of 2 nm have been prepared by reduction of Ir(I) dissolved in the ionic liquid with H2. This catalytic solution can be reused several times for the biphasic hydrogenation of olefins under mild reaction conditions.     

Polysugar-stabilized Pd nanoparticles exhibiting high catalytic activities for hydrodechlorination of environmentally deleterious trichloroethylene

In this paper, we present a straightforward and environmentally friendly aqueous-phase synthesis of small Pd nanoparticles (approximately 2.4 nm under the best stabilization) by employing a "green", inexpensive, and biodegradable/biocompatible polysugar, sodium carboxymethylcellulose (CMC), as a capping agent. The Pd nanoparticles exhibited rather high catalytic activity (observed pseudo-first-order reaction kinetic rate constant, k(obs), is up to 828 L g(-1) min(-1)) for the hydrodechlorination of environmentally deleterious trichloroethene (TCE) in water. Fourier transform IR (FT-IR) spectra indicate that CMC molecules interact with the Pd nanoparticles via both carboxyl (-COO-) and hydroxyl (-OH) groups, thereby functioning to passivate the surface and suppress the growth of the Pd nanoparticles. Hydrodechlorination of TCE using differently sized CMC-capped Pd nanoparticles as catalyst was systematically investigated in this work. Both the catalytic activity (k(obs)) and the surface catalytic activity (turnover frequency, TOF) of these CMC-capped Pd nanoparticles for TCE degradation are highly size-dependent. This point was further verified by a comparison of the catalytic activities and surface catalytic activities of CMC-capped Pd nanoparticles with those of beta-D-glucose-capped Pd and neat Pd nanoparticles for TCE degradation.     

Palladium nanoparticles‐decorated triethanolammonium chloride ionic liquid‐modified TiO2 nanoparticles (TiO2/IL‐Pd): A highly active and recoverable catalyst for Suzuki–Miyaura cross‐coupling reaction in aqueous medium

In this work, an easily obtained procedure was successfully implemented to prepare novel palladium nanoparticles decorated on triethanolammonium chloride ionic liquid‐functionalized TiO₂ nanoparticles [TiO₂/IL‐Pd]. Different methods were carried out for characterizations of the synthesized nanocatalyst (HR‐TEM, XPS, XRD, FE‐SEM, EDX, FT‐IR and ICP). TiO₂/IL‐Pd indicated good catalytic activity for the Suzuki–Miyaura cross‐coupling reaction of arylboronic acid with different aryl halides in aqueous media at ambient temperature. The recycled catalyst was investigated with ICP to amount of Pd leaching after 6 times that had diminished slightly, Thus, was confirmed that the nanocatalyst has a good sustainability for C–C Suzuki–Miyaura coupling reaction. The catalyst can be conveniently separated by filtration of the reaction mixture and reused for 6 times without significant loss of its activity. It supplies an environmentally benign alternative path to the existing protocols for the Suzuki–Miyaura reaction.     

Pd‐Cu alloy nanoparticle supported on amine‐terminated ionic liquid functional 3D graphene and its application on Suzuki cross‐coupling reaction

Well distributed Pd‐Cu bimetallic alloy nanoparticles supported on amine‐terminated ionic liquid functional three‐dimensional graphene (3D IL‐rGO/Pd‐Cu) as an efficient catalyst for Suzuki cross‐coupling reaction has been prepared via a facile synthetic method. The introduction of IL‐NH₂ cations on the surface of graphene sheets can effectively avoid the re‐deposition of graphene sheets, allowing the catalyst to be reused up to 10 cycles. The addition of Cu not only saves cost but also ensures high catalytic efficiency. It is worthy to note that the catalyst 3D IL‐rGO/Pd_2.5Cu_2.5 can efficiently catalyze the Suzuki cross‐coupling reaction with the yield up to 100% in 0.25 h, almost one‐fold higher than that by the pristine IL‐rGO/Pd_2.5 catalyst (52%). The Powder X‐Ray Diffraction (XRD), combining energy dispersive X‐ray spectroscopy (EDS) mapping results confirm the existence and distribution of Pd and Cu in the bimetallic nanoparticles. The transmission electron microscopy (TEM) reveals the nanoparticle size with an average diameter of 3.0 ± 0.5 nm. X‐ray photoelectron spectroscopy (XPS) analysis proved the presence of electron transfer from Cu to Pd upon alloying. Such alloying‐induced electronic modification of Pd‐Cu alloy and 3D ionic liquid functional graphene with large specific surface area both accounted for the catalytic enhancement.     

Stabilized well-dispersed Pd(0) nanoparticles for aminocarbonylation of aryl halides

Well-dispersed palladium (0) nanoparticles stabilized with phosphonium based ionic liquid were synthesized conveniently and fully characterized. A catalyst system comprising of the Pd(0) nanoparticles and a base was found to be recyclable and efficient for the aminocarbonylation reaction of aryl iodide in ionic liquid media. In the presence of potassium tert-butyloxide, for the relatively stable aryl chloride and bromide substrates, medium activities were achieved for the catalyst. The catalyst composites can be recycled at least five times with sustained activity.     

Synthesis and characterization of Pt0 nanoparticles in imidazolium ionic liquids

The controlled decomposition of Pt2(dba)3 (dba = dibenzylideneacetone) dispersed in 1-n-butyl-3-methylimidazolium tetrafluoroborate (BMI.BF4) and hexafluorophosphate (BMI.PF6) ionic liquids in the presence of cyclohexene by molecular hydrogen produces Pt0 nanoparticles. The formation of these nanoparticles follows the two-step [A --> B, A + B --> 2B (k1, k2)] autocatalytic mechanism. The catalytic activity in the hydrogenation of cyclohexene is influenced by the nature of the anion rather than the mean-diameter of the nanoparticles. Thus, higher catalytic activity was obtained with Pt0 dispersed in BMI.BF4 containing the less coordinating anion although these nanoparticles possess a larger mean diameter (3.4 nm) than those obtained in BMI.PF6 (2.3 nm). Similar mean diameter values were estimated from in situ XRD and SAXS. XPS analyses clearly show the interactions of the ionic liquid with the metal surface demonstrating the formation of an ionic liquid protective layer surrounding the platinum nanoparticles. SAXS analysis indicated the formation of a semi-organized ionic liquid layer surrounding the metal particles with an extended molecular length of around 2.8 nm in BMI.BF4 and 3.3 nm in BMI.PF6.     

In Situ Formation of Au–Pd Bimetallic Active Sites Promoting the Physically Mixed Monometallic Catalysts in the Liquid‐Phase Oxidation of Alcohols

The catalytic oxidation of alcohols with molecular oxygen on supported nanometallic catalysts represents one of the green methods in a crucial process for the synthesis of fine chemicals. We have designed an experiment using physically mixed Au/AC and Pd/AC (AC=activated carbon) as the catalyst in the liquid‐phase oxidation of benzyl alcohol by aerobic oxygen. The evolution of the physically mixed catalyst structures at different stages in the catalytic reaction was investigated by aberration‐corrected high‐resolution transmission electron microscopy and spatially resolved element mapping techniques at the nanometre scale, and they were also compared with the structure of the bimetallic alloy. For the first time we show the formation of surface Au–Pd bimetallic sites by reprecipitation of Pd onto Au nanoparticles. Negligible Au leaching was observed. The in situ structural evolution can be directly correlated to the great enhancement of the catalyst activity. Moreover, we distinguish the different behaviours of Au and Pd, thus suggesting an oxygen differentiating mechanism for Au and Pd sites. The findings are of great importance to both the understanding of the structure–activity correlation and the design of highly active catalysts in green chemistry.     

Ionic‐Liquid‐Grafted Rigid Poly(p‐Phenylene) Microspheres: Efficient Heterogeneous Media for Metal Scavenging and Catalysis

Novel guanidinium ionic liquid‐grafted rigid poly(p‐phenylene) (PPPIL) microspheres have been developed for metal scavenging and catalysis. The noble‐metal nanoparticles supported on the microspheres surface can be used as efficient heterogeneous catalysts. The combination of nanoparticles and ionic liquid fragments on the microsphere surfaces enhance the activity and durability of the catalyst. The PPPIL ? Pd⁰ catalyst has been tested in the Suzuki cross‐coupling reaction, and exhibits much higher catalytic activity than Pd catalysts supported on porous polymer matrices. The PPPIL ? Pd⁰ catalyst can be recycled at least for nine runs without any significant loss of activity. The present approach may, therefore, have potential applications in transition‐metal‐nanocatalyzed reactions.     

Immobilization of a Pd(II) complex on hydrophilic graphite oxide and its catalytic investigation in the Heck coupling reaction

Tetraamminepalladium(II) chloride monohydrate was heterogenized on hydrophilic graphite oxide (GO), synthesized by Brodie's method. Two samples, with Pd contents of 2% and 5%, referred to as Pd2 and Pd5, respectively, were prepared by a simple and scalable impregnation method and tested as catalysts in the Heck coupling reaction of styrene and bromobenzene. The reactions were carried out at 423 K for 3 hr by applying Na₂CO₃ as a base and N-methylpirrolidone or dimethylformamide (DMF) as a solvent. The Pd complexes heterogenized on graphene oxide platelets proved to be highly active and selective catalysts, and Pd2 was more efficient than Pd5. The effect of quaternary ammonium salts (tetrabutylammonium bromide and tetrabutylammonium chloride, TBAC) as modifiers and that of an ionic liquid (1-butyl-3-methylimidazolium bromide, bmim) was studied and the highest conversions were obtained when TBAC was employed. The selectivity for the formation of the main product, E-stilbene, was in the range 91–96%. Catalyst recycling was investigated and the extent of leaching was found to depend on the solvent. DMF proved to be a highly feasible reaction medium because both catalysts could be recycled five times in this solvent without any significant loss of activity. A hot filtration test was performed and gave evidence that leaching of the active Pd species did not take place under the above reaction conditions. These results substantiate the fact that simple cationic Pd species can be efficiently immobilized on pristine GO surfaces without the requirement of the functionalization of GO with nitrogen-containing mono or multidentate ligands as binding sites.     

Composition Control Synthesis and Catalytic Properties in the Suzuki Reaction of Bimetallic PdSn Nanoparticles

We have successfully prepared 6.5 nm palladium tin (PdSn) alloy nanoparticles (NPs) with tunable compositions by high‐temperature reduction of tin acetate and palladium bromide in the presence of oleylamine and trioctylphosphine. The catalytic activities of PdSn NPs with different compositions were evaluated through Suzuki reactions. The PdSn nanocatalysts show better catalytic activity on Suzuki reactions than an equal amount of pure Pd NPs, and their catalytic activities are highly composition dependent. Among these NPs, Pd₆₃Sn₃₇/C NPs exhibited the highest catalytic performance with higher reaction activity, lower Pd leaching properties, and higher stability even after eight recycle reactions.     

Kinetics of MTO-catalyzed olefin epoxidation in ambient temperature ionic liquids: UV/Vis and 2H NMR study

The kinetics of oxygen-atom transfer from the peroxo complexes of methyltrioxorhenium (MTO) to alkenes in ionic liquids have been investigated. Noncatalytic conversions of alkenes to epoxide were monitored by UV/Vis at 360 nm, where the monoperoxorhenium (mpRe) and diperoxorhenium (dpRe) complexes absorb. Water- and peroxide-free dpRe was prepared in situ by the reaction of MTO and urea hydrogen peroxide (UHP) in dry THF. The observed biexponential time profiles in conjunction with kinetic modeling allow the assignment of the fast step to the reaction of olefin with dpRe (k4) and the slow step to the analogous reaction with mpRe (k3). In most of the tudied ionic liquids, k4 approximately 5 x k3. 2H NMR experiments conducted with [D3]dpRe under non-steady-state conditions confirm the speciation of the catalytic system in ionic liquids and assert the validity of the UV/Vis kinetics. Deuteriated alkenes were used to study the catalytic epoxidation and dihydroxylation of alkenes by 2H NMR spectroscopy. The values of k4 for alpha-methylstyrene in several ionic liquids exceed what is observed in acetonitrile by an order of magnitude. While the rate of olefin epoxidation is unaffected by the nature of the ionic liquid cation, a discernible kinetic effect is observed with coordinating anions such as nitrate.     

Synthesis of palladium nanoparticles using triazolium based ionic liquids: A reusable catalyst for addition of arylboronic acids to nitrostyrenes

Abstract

Formation of stable and small-sized palladium nanoparticles of diameter 9.4?nm was accomplished by a simple heating of Pd(OAc)₂ in 1-octyl-1,2,4-triazolium trifluoroacetate ionic liquid under standard atmospheric hydrogen pressure. Palladium nanoparticles were characterized by XRD, SEM, TEM, and EDX analysis techniques. The application of an addition reaction of arylboronic acid to nitrostyrenes provided diaryl-substituted products in high yields. This Pd-NPs are capable of being recycled by a simple decantation procedure and reusable up to four times without any effect on its catalytic activity.