Recyclable benzyl-type fluorous tags: Preparation and application in oligosaccharide synthesis

We herein described the design, synthesis and application of two recyclable benzyl-type fluorous tags with double fluorous chains. The benzyl-type fluorous tags were prepared in 3 steps from a commercially available fluorous alcohol. The glycosylation of the benzyl-type tags with imidate donors proceeded smoothly to provide the corresponding fluorous-tagged carbohydrates in good to excellent yields, which were readily purified by fluorous solid-phase extraction(FSPE). Efficient removal of the tags from tagtethered carbohydrates were conducted under the common catalytic hydrogenation condition and the initial benzyl-type fluorous tags could be regenerated [5_TD$IF]via a 2-step simple procedure in 69%–93% yields.The utility of the new benzyl-fluorous tag was demonstrated [7_TD$IF]via the FSPE-assisted synthesis of oligosaccharides Gb3.     

p-Alkoxyphenyl-type heavy fluorous tag for the preparation of carbohydrate units

Carbohydrate glycosyl acceptor and donor moieties were synthesized efficiently by using the fluorous tag method. The p-alkoxyphenyl-type heavy fluorous tag was stable under all the reaction conditions used in the preparation of the various carbohydrate units. Each synthetic intermediate carrying the fluorous tag could be obtained in a simple straightforward manner by partition between fluorous and organic solvents.     

Microwave synthesis and fluorous purification of 4-(tetrathienyl)butyric acid for self-assembled monolayer semiconductor applications

Microwave-promoted synthesis and fluorous purification procedures have been employed successfully to generate 4-(tetrathienyl)butyric acid rapidly. Initially, a fluorous tag 1H,1H-perfluorooctylamine was tethered to 4-(thienyl)butyric acid via an amide traceless linkage. Subsequent, sequential α-bromination and Stille cross-coupling reactions with 2-(tributylstannyl)thiophene grew the fluorous-tagged 4-(oligothienyl)butyric acid efficiently. Each synthetic transformation was followed by a fluorous-solid phase extraction procedure to isolate the fluorous-tagged compound intermediate in excellent yield. Finally, the fluorous tag was cleaved by microwave-promoted saponification of the amide bond to liberate the desired 4-(tetrathienyl)butyric acid.     

Fluorous (trimethylsilyl)ethanol: a new reagent for carboxylic acid tagging and protection in peptide synthesis

Starting with a fluorous analogue of 2-(trimethylsilyl)ethanol, we have designed an easy method for preparing a new fluorous tag ((F)TMSE) for the protection of carboxylic acids. Because mild conditions are employed in the tag cleavage (TBAF in the presence of 4 A molecular sieves, which prevent racemization), this tag can be advantageously used in the synthesis of peptides and modified peptides, as we have demonstrated with several examples, including the fluorous synthesis of short alpha- and beta-peptides as well as of modified fluorinated retropeptides.     

Probing the limitations of the fluorous content for tag-mediated microarray formation

The synthesis of a di-perfluorohexyl tag is reported for use in a fluorous-based carbohydrate microarray. A comparative microarray study with this di-perfluorohexyl tag and a mono-perfluorooctyl and mono-perfluorohexyl tag found the increased fluorous content conducive to better spot morphology and easier washing protocols without precluding reuse of the fluorous slide.     

Pronounced rate enhancements in condensation reactions attributed to the fluorous tag in modified Mukaiyama reagents

The observed rate enhancement for the condensation reaction between 2-phenyl benzoic acid and isopropanol mediated by fluorous Mukaiyama reagents is described. It is shown that Mukaiyama reagents bearing a fluorous tag increase the reaction rate considerably when compared to their non-fluorous tagged counterpart. Furthermore, it is observed that the longer the fluorous chain, the higher the activity of the Mukaiyama reagent.     

Microwave-assisted fluorous synthesis of 2-aryl-substituted 4-thiazolidinone and 4-thiazinanone libraries

A straightforward two-step protocol for the synthesis of 2-aryl-substituted 4-thiazolidinone and 4-thiazinanone libraries has been developed. The one-pot, three-component reactions of fluorous benzaldehydes with amines and mercaptoacetic acid or mecaptopropanoic acid produce the heterocyclic systems. Intermediates purified by fluorous solid-phase extraction are subject to microwave-assisted palladium-catalyzed coupling reactions to simultaneously cleave the fluorous tag and introduce the biaryl and thioaryl functional groups to the 2-position of 4-thiazolidinones and 4-thiazinanones.     

Fluorous-enhanced multicomponent reactions for making drug-like library scaffolds

Multicomponent reactions (MCRs) generate multiple bonds in a single reaction process, which is highly efficient to construct relatively complex molecules. Conducting post-MCR modification reactions further increases the molecular complexity and diversity. MCR has become a powerful approach to make drug-like molecules in lead generation chemistry. In fluorous MCR (F-MCR), one of the starting materials is attached to a fluorous tag and used as the limiting agent. After the MCR, the fluorous component is fished out from the reaction mixture and used for post-MCR modifications. The fluorous tag can be finally removed in traceless fashion by displacement or cyclization reactions. Unique fluorous technology such as fluorous solid-phase extraction (F-SPE) facilitates the separation process. Other techniques such as microwave irradiation and plate-to-plate SPE can also be used to make the F-MCR even more efficient. Syntheses of unique heterocyclic and natural product-like library scaffolds using Ugi/de-Boc/cyclization, MCR/Suzuki coupling, and [3+2] cycloaddition/de-tag/cyclization protocols are described in this paper.     

Synthesis of aminoglycoside derivatives on a Cbz-type heavy fluorous tag

Four aminoglycoside derivatives containing a 2,6-diamino-2,6-dideoxy-d-glucopyranose disaccharide structure were successfully prepared by using a Cbz-type heavy fluorous tag in a fluorous synthesis. A Cbz-type heavy fluorous tag was prepared using the hexakis(fluorous chain)-type alcohol 11, and the fluorous alcohol 11 was recovered in good yield after the synthesis of aminoglycoside derivatives.     

Towards oligosaccharide library synthesis by fluorous mixture method

The synthesis of an oligosaccharide library by a fluorous tag method is reported here. Several acceptors and donors were mixed and glycosylated. The reaction mixture was purified by chromatography over fluorous HPLC to provide disaccharides in order of increasing fluorine content of the tag. This method could be applied to oligosaccharide libraries consisting of two sets of structural isomers.     

Design, synthesis and photoactivation studies of fluorous photolabels

Two fluorous diazirine photolabels were designed, synthesized and subjected to photoactivation studies. The photoactivation studies revealed an unexpected photoreaction when the fluorous tag was directly connected to the diazirine ring, leading to the formation of a fluorous alkene. The more efficient photolabel of the two was identified as a flexible precursor for target specific photoaffinity labels for fluorous proteomics by adding appropriate ligands depending on the target protein subset. As a proof of feasibility, mannose residues were added to the photolabel making it a potential photoaffinity label to tag proteins that bind mannose.     

Synthesis and properties of a novel family of fluorous triphenylphosphine derivatives

A novel approach to the preparation of perfluorotail-functionalized triarylphosphines using a p-silyl substituent as the branching point has been developed. This approach enabled the attachment of between three and nine perfluorotails per phosphorus atom, resulting in the production of highly fluorous tris[p-(1H,1H,2H, 2H-perfluoroalkylsilyl)aryl]phosphines, P[C(6)H(4)-p-SiMe(3)(-)(n)()(CH(2)CH(2)C(x)()F(2)(x)()(+1))(n)()](3) (n = 1, 2, 3; x = 6, 8), containing between 50 and 67 wt % fluorine. (31)P NMR studies indicate that the phosphorus atoms, and consequently the sigma-donor and pi-acceptor properties of these phosphines, are not influenced by the electron-withdrawing perfluoroalkyltails. The fluorous triarylphosphines are readily soluble in fluorous solvents and display fluorous phase preference in several fluorous biphasic systems. The phase partitioning of these fluorous ligands, as well as their donor properties, is discussed in relation to their potential for fluorous biphasic catalyst separation.     

Practical heavy fluorous tag for carbohydrate synthesis with minimal chromatographic purification

A practical heavy fluorous tag 5 bound to a benzylic linker was prepared and applied to carbohydrate synthesis. The fluorous tag 5 was readily introduced to the desired hydroxyl group and carboxyl group by using various methods. Synthesis of the oligosaccharide, which included the terminal structure of class III mucin, was achieved with single-column chromatographic purification. In addition, because of the symmetrical structure of 5, each fluorous synthetic intermediate could be analyzed much easier by NMR spectroscopy than in the case of the fluorous compounds connecting our previous fluorous tags.     

A fluorous Mukaiyama coupling reagent for a concise condensation reaction: utility of medium-fluorous strategy

The entire study of condensation reactions using various fluorous Mukaiyama reagents, including a novel medium-fluorous strategy, is described. A Mukaiyama reagent bearing a medium-fluorous content tag, between 40 and 60% fluorine by weight, was prepared and examined in ester and amide-forming condensation reactions. At the end of the reactions, the fluorous pyridone by-product was effectively separated from non-fluorous components by increasing the water content of the crude reaction mixture and subsequent filtration of the precipitate. It is also shown that Mukaiyama reagents bearing a fluorous tag increase the reaction rate considerably when compared to their non-fluorous tagged counterpart. Interestingly, it was observed that the longer the fluorous chain, the higher the activity of the Mukaiyama reagent.     

Recyclable cinchona alkaloid catalyzed asymmetric Michael addition reaction

A highly enantioselective and diastereoselective Michael addition reaction of α-fluoro-β-ketoesters with maleimides is catalyzed by fluorous cinchona alkaloid to afford two adjacent chiral centers. The catalyst attached with a perfluroalkyl tag can be recovered by fluorous solid-phase extraction (F-SPE).     

An alternative and facile purification procedure of amidation and esterification reactions using a medium fluorous Mukaiyama reagent

A convenient methodology for the separation of a fluorous by-product using fluorous chemistry is described. A Mukaiyama coupling reagent bearing a medium fluorous tag, between 40% and 60% fluorine by weight, can be effectively separated from non-fluorous components by increasing the water content of the crude reaction mixture and subsequent filtration. Additional fluorous solid phase extraction is not necessary.     

A novel, base-labile fluorous amine protecting group: synthesis and use as a tag in the purification of synthetic peptides

A new, base-labile fluorous tag based on the Msc amine protecting group was synthesized. Its use in the purification of synthetic peptides by fluorous HPLC or fluorous SPE was demonstrated.     

Fluorous synthesis of hydantoins and thiohydantoins

[reaction: see text] A fluorous synthesis of hydantoins is introduced. The reaction of perfluoroalkyl (Rfh)-tagged amino esters with an isocyanate is followed by the cyclization of ureas and simultaneous cleavage of the fluorous tag to afford hydantoins. The product purification is performed by solid-phase extraction over FluoroFlash cartridges, and no fluorous solvent is involved in either the reaction or the separation processes. The same method applies to synthesis of thiohydantoins.     

Fluorous-Assisted One-Pot Oligosaccharide Synthesis

A new method for oligosaccharide assembly that combines the advantages of one-pot synthesis and fluorous separation is described. After one-pot glycosylations are completed, a fluorous tag is introduced into the reaction mixture to selectively "catch" the desired oligosaccharide, which is rapidly separated from non-fluorous impurities by fluorous solid-phase extraction (F-SPE). Subsequent "release" of the fluo rous tag and F-SPE achieved the purification of the desired oligosaccharide without the use of time- and solvent-consuming silica gel chromatography. Linear and branched oligosaccharides have been synthesized with this approach in just a few hours (for the overall oligosaccharide assembly and purification process).     

A highly fluorous room-temperature ionic liquid exhibiting fluorous biphasic behavior and its use in catalyst recycling

[formula: see text] A novel fluorous room-temperature ionic liquid, 1-butyl-3-methyl-imidazolium tetrakis[p-[dimethyl(1H, 1H, 2H, 2H-perfluorooctyl)silyl]phenyl]-borate (1), was used as a solvent for the homogeneous hydrosilylation of 1-octene catalyzed by a fluorous version of Wilkinson's catalyst. The catalyst was recycled by biphasic separation with an average retention of catalyst activity of 94%. As opposed to other ionic liquids, 1 exhibits high miscibility with apolar compounds such as alkenes and resembles fluorous solvents in its phase behavior with organic solvents.