Cluster phase chemistry: collisions of vibrationally excited cationic dicarboxylic acid clusters with water molecules initiate dissociation of cluster components

A homologous series of cationic gas-phase clusters of dicarboxylic acids (oxalic acid, malonic acid, succinic acid, glutaric acid, and adipic acid) generated via electrospray ionization (ESI) are investigated using collision-induced dissociation (CID). Singly charged cationic clusters with the composition (Na(+))(2n+1)(dicarboxylate(2-))(n), where n = 1-5, are observed as major gas-phase species. Significant abundances of singly charged sodiated hydrogen dicarboxylate clusters with the composition (Na(+))(2n)(dicarboxylate(2-))(n)(H+), where n = 1-6, are observed with oxalic acid, malonic acid, and succinic acid. Isolation of the clusters followed by CID results mainly in sequential loss of disodium dicarboxylate moieties for the clusters of succinic acid, glutaric acid, and adipic acid. However, the dimer of sodiated hydrogen succinate, all malonate clusters, and all oxalate clusters, with the exception of the dimer, exhibit complex chemical reactions initiated by the collision of vibrationally excited clusters with water molecules. Generally, water molecules serve as proton donors for reacting dicarboxylate anions in the cluster, initiating dissociation pathways such as the decomposition of the malonate ion to yield an acetate ion and CO(2). The reactivity of several mixed dicarboxylate clusters is also reported. For example, malonate anion is shown to be more reactive than oxalate anion for decarboxylation when both are present in a cluster. The energetics of several representative cluster phase reactions are evaluated using computational modeling. The present results for cationic clusters are compared and contrasted to earlier studies of anionic sodiated dicarboxylic acid clusters.     

4-Cyanopyridine and amide-N and amide-O linkage isomers of 4-pyridinecarboxamide on trans-chloro(1,4,8,11-tetraazacyclotetradecane)ruthenium(II/III)

The synthesis, UV-vis spectra, and electrochemical behavior of the nitrile-bonded trans-[Ru(II)Cl(cyclam)(4-NCpyH(+))](BF(4))(2) (4-Ncpy = 4-cyanopyridine; cyclam = 1,4,8,11-tetraazacyclotetradecane) and of trans-[Ru(III)Cl(cyclam)(NHC(O)-4-pyH(+))](2+) are described. The UV-vis spectrum of the Ru(II) nitrile complex shows a MLCT band at 548 nm at pH 1, which is shifted to 440 nm at pH approximately 6, for the unprotonated species. trans-[Ru(II)Cl(cyclam)(4-NCpyH(+))](2+) was electrolytically oxidized (+600 mV vs Ag/AgCl) at pH 1 to Ru(III), followed by hydrolysis (k = 0.25 s(-1)) of the coordinated nitrile to give trans-[Ru(III)Cl(cyclam)(NHC(O)-4-pyH(+))](2+), in which the amide is deprotonated and coordinated through nitrogen. The identity of the species is pH dependent, the nitrogen-bonded amide prevailing at low pH (< 7), but the oxygen-bonded amide is formed through linkage isomerization at higher pH (>8). Reduction of trans-[Ru(III)Cl(cyclam)(NHC(O)-4-pyH)](2+) in acidic media does not result in fast aquation (k = approximately 2.4 x 10(-5) s(-1)) as for other amides on ruthenium(II) pentaammine, but instead linkage isomerization occurs, resulting in the oxygen-bonded species, with an estimated rate constant of approximately 2 x 10(-2) s(-1), smaller than in the pentaammine analogues.     

Conformations, energies, and intramolecular hydrogen bonds in dicarboxylic acids: implications for the design of synthetic dicarboxylic acid receptors

The various conformers of the dicarboxylic acids HO2C--(CH2)n--CO2H, n = 1-4, were obtained using density functional methods (DFT), both in the gas phase and in the aqueous phase using a polarized continuum model (PCM). Several new conformers were identified, particularly for the two larger molecules glutaric (n = 3) and adipic acid (n =4). The PCM results show that the stability of most conformers were affected, many becoming unstable in the aqueous phase; and the energy ordering of conformers is also different. The results suggest that conformational preferences could be important in determining the design and stability of appropriate synthetic receptors for glutaric and adipic acid. Geometry changes between gas and aqueous phases were most marked in those conformers containing an intramolecular hydrogen bond. Additional calculations have probed the strength of intramolecular hydrogen bonds in these dicarboxylic acids. In the cases of glutaric and adipic acid, the strength of the intramolecular hydrogen bond were estimated to be around 28-29 kJ/mol, without any vibrational energy correction. The intramolecular hydrogen bond energies in malonic and succinic acid were also estimated from the calculated H-bond distances using an empirical relationship. Intramolecular H-bond redshifts of 170-250 cm(-1) have been estimated from the results of the harmonic frequency analyses.     

Solvolysis of 1,1-dimethyl-4-alkenyl chlorides: evidence for pi-participation

Tertiary 1,1-dimethyl-4-alkenyl chloride (1) solvolyzes with significantly reduced secondary beta-deuterium kinetic isotope effect (substrate with two trideuteromethyl groups) and has a lower entropy and enthalpy of activation than the referent saturated analogue 4 (k(H)/k(D) = 1.30 +/- 0.03 vs k(H)/k(D) = 1.79 +/- 0.01; Delta Delta H(++) = -9 kJ mol(-1), Delta Delta S(++) = -36 J mol(-1) K(-1), in 80% v/v aqueous ethanol), indicating participation of the double bond in the rate-determining step. Transition structure 1-TS computed at the MP2(fc)/6-31G(d) level of theory revealed that the reaction proceeds through a late transition state with considerably pronounced double bond participation and a substantially cleaved C-Cl bond. The doubly unsaturated compound 3 (1,1-dimethyl-4,8-alkadienyl chloride) solvolyzes with further reduction of the isotope effect, and a drastically lower entropy of activation (k(H)/k(D) = 1.14 +/- 0.01; DeltaS(++) = -152 +/- 12 J mol(-1) K(-1), in 80% v/v aqueous ethanol), suggesting that the solvolysis of 3 proceeds by way of extended pi-participation, i.e., the assistance of both double bonds in the rate-determining step.     

Organic-acid effect on the structures of a series of lead(II) complexes

An investigation into the dependence of coordination polymer architectures on organic-acid ligands is reported on the basis of the reaction of Pb(NO3)2 and eight structurally related organic-acid ligands in the presence or absence of N-donor chelating ligands. Eight novel lead(II)-organic architectures, [Pb(adip)(dpdp)]2 1, [Pb(glu)(dpdp)] 2, [Pb(suc)(dpdp)] 3, [Pb(fum)(dpdp)] . H2O 4, [Pb2(oba)(dpdp)2] . 2(dpdp).2(NO3).2H2O 5, [Pb2(1,4-bdc)2(dpdp)2] . H2O 6, [Pb(dpdc)(dpdp)] 7, and [Pb(1,3-bdc)(dpdp)] . H2O 8, where dpdp = dipyrido[3,2-a:2',3'-c]-phenazine, H2adip = adipic acid, H2glu = glutaric acid, H2suc = succinic acid, H2fum = fumaric acid, H2oba = 4,4'-oxybis(benzoic acid), 1,4-H2bdc = benzene-1,4-dicarboxylic acid, H2dpdc = 2,2'-diphenyldicarboxylic acid, and 1,3-H2bdc = benzene-1,3-dicarboxylic acid, were successfully synthesized under hydrothermal conditions through varying the organic-acid linkers and structurally characterized by X-ray crystallography. Compounds 1-8 crystallize in the presence of organic-acid linkers as well as secondary N-donor chelating ligands. Diverse structures were observed for these complexes. 1 and 5 have dinuclear structures, which are further stacked via strong pi-pi interactions to form 2D layers. 2-3 and 6-8 feature chain structures, which are connected by strong pi-pi interactions to result in 2D and 3D supramolecular architectures. Compound 4 contains 2D layers, which are further extended to a 3D structure by pi-pi interactions. A systematic structural comparison of these 8 complexes indicates that the organic-acid structures have essential roles in the framework formation of the Pb(II) complexes.     

Cluster phase chemistry: gas-phase reactions of anionic sodium salts of dicarboxylic acid clusters with water molecules

A homologous series of anionic gas-phase clusters of dicarboxylic acids (oxalic acid, malonic acid, succinic acid, glutaric acid, and adipic acid) generated via electrospray ionization (ESI) are investigated using collision-induced dissociation (CID). Sodiated clusters with the composition (Na(+))(2)(n+1)(dicarboxylate(2-)(n+1) for singly charged anionic clusters, where n = 1-4, are observed as major gas-phase species. Isolation of the clusters followed by CID results mainly in sequential loss of disodium dicarboxylate moieties for the clusters of succinic acid, glutaric acid, and adipic acid (C4-C6). However, all oxalate (C2) and malonate (C3) clusters and dimers (n = 1) of succinate (C4) and glutarate (C5) exhibit more complex chemistry initiated by collision of the activated cluster with water molecules. For example, with water addition, malonate clusters dissociate to yield sodium acetate, carbon dioxide, and sodium hydroxide. More generally, water molecules serve as proton donors for reacting dicarboxylate anions in the cluster and introduce energetically favorable dissociation pathways not otherwise available. Density functional theory (DFT) calculations of the binding energy of the cluster correlate well with the cluster phase reactions of oxalate and malonate clusters. Clusters of larger dicarboxylate ions (C4-C6) are more weakly bound, facilitating the sequential loss of disodium dicarboxylate moieties. The more strongly bound small dicarboxylate anions (oxalate and malonate) preferentially react with water molecules rather than dissociate to lose disodium dicarboxylate monomers when collisionally activated. Implications of these results for the atmospheric aerosol chemistry of dicarboxylic acids are discussed.     

Thermodynamics, kinetics, and mechanism of the stepwise dissociation and formation of Tris(L-lysinehydroxamato)iron(III) in aqueous acid

pK(a) values for the hydroxamic acid, alpha-NH(3)(+), and epsilon-NH(3)(+) groups of L-lysinehydroxamic acid (LyHA, H(3)L(2+)) were found to be 6.87, 8.89, and 10.76, respectively, in aqueous solution (I = 0.1 M, NaClO(4)) at 25 degrees C. O,O coordination to Fe(III) by LyHA is supported by H(+) stoichiometry, UV-vis spectral shifts, and a shift in nu(CO) from 1648 to 1592 cm(-1) upon formation of mono(L-lysinehydroxamato)tetra(aquo)iron(III) (Fe(H(2)L)(H(2)O)(4)(4+)). The stepwise formation of tris(L-lysinehydroxamato)iron(III) from Fe(H(2)O)(6)(3+) and H(3)L(2+) was characterized by spectrophotometric titration, and the values for log beta(1), log beta(2), and log beta(3) are 6.80(9), 12.4(2), and 16.1(2), respectively, at 25 degrees C and I = 2.0 M (NaClO(4)). Stopped-flow spectrophotometry was used to study the proton-driven stepwise ligand dissociation kinetics of tris(L-lysinehydroxamato)iron(III) at 25 degrees C and I = 2.0 M (HClO(4)/NaClO(4)). Defining k(n) and k(-n) as the stepwise ligand dissociation and association rate constants and n as the number of bound LyHA ligands, k(3), k(-3), k(2), k(-2), k(1), and k(-1) are 3.0 x 10(4), 2.4 x 10(1), 3.9 x 10(2), 1.9 x 10(1), 1.4 x 10(-1), and 1.2 x 10(-1) M(-1) s(-1), respectively. These rate and equilibrium constants are compared with corresponding constants for Fe(III) complexes of acetohydroxamic acid (AHA) and N-methylacetohydroxamic acid (NMAHA) in the form of a linear free energy relationship. The role of electrostatics in these complexation reactions to form the highly charged Fe(LyHA)(3)(6+) species is discussed, and an interchange mechanism mediated by charge repulsion is presented. The reduction potential for tris(L-lysinehydroxamato)iron(III) is -214 mV (vs. NHE), and a comparison to other hydroxamic acid complexes of Fe(III) is made through a correlation between E(1/2) and pFe.     

Mechanism of oxidation of benzaldehyde by polypyridyl oxo complexes of Ru(IV)

The oxidation of benzaldehyde and several of its derivatives to their carboxylic acids by cis-[Ru(IV)(bpy)2(py)(O)]2+ (Ru(IV)=O2+; bpy is 2,2'-bipyridine, py is pyridine), cis-[Ru(III)(bpy)2(py)(OH)]2+ (Ru(III)-OH2+), and [Ru(IV)(tpy)(bpy)(O)]2+ (tpy is 2,2':6',2'-terpyridine) in acetonitrile and water has been investigated using a variety of techniques. Several lines of evidence support a one-electron hydrogen-atom transfer (HAT) mechanism for the redox step in the oxidation of benzaldehyde. They include (i) moderate k(C-H)/k(C-D) kinetic isotope effects of 8.1 +/- 0.3 in CH3CN, 9.4 +/- 0.4 in H2O, and 7.2 +/- 0.8 in D2O; (ii) a low k(H2O/D2O) kinetic isotope effect of 1.2 +/- 0.1; (iii) a decrease in rate constant by a factor of only approximately 5 in CH3CN and approximately 8 in H2O for the oxidation of benzaldehyde by cis-[Ru(III)(bpy)2(py)(OH)]2+ compared to cis-[Ru(IV)(bpy)2(py)(O)]2+; (iv) the appearance of cis-[Ru(III)(bpy)2(py)(OH)]2+ rather than cis-[Ru(II)(bpy)2(py)(OH2)]2+ as the initial product; and (v) the small rho value of -0.65 +/- 0.03 in a Hammett plot of log k vs sigma in the oxidation of a series of aldehydes. A mechanism is proposed for the process occurring in the absence of O2 involving (i) preassociation of the reactants, (ii) H-atom transfer to Ru(IV)=O2+ to give Ru(III)-OH2+ and PhCO, (iii) capture of PhCO by Ru(III)-OH2+ to give Ru(II)-OC(O)Ph+ and H+, and (iv) solvolysis to give cis-[Ru(II)(bpy)2(py)(NCCH3)]2+ or the aqua complex and the carboxylic acid as products.     

Kinetics and mechanism of the reduction of a macrocyclic Rh(III) complex by chromium(II) ions: pH-controlled selectivity to rhodium(II) vs. rhodium(III) hydride

Aqueous chromium(II) ions reduce a macrocyclic Rh(III) complex L(1)(H(2)O)(2)Rh(3+) (L(1) = 1,4,8,11-tetraazacyclotetradecane) to the hydride L(1)(H(2)O)RhH(2+) in two discrete, one-electron steps. The first step generates L(1)(H(2)O)Rh(2+) with kinetics that are first order in each rhodium(III) complex and Cr(H(2)O)(6)(2+), and inverse in [H(+)], k/M(-1) s(-1) = 0.065/(0.0031 + [H(+)]). Further reduction of L(1)(H(2)O)Rh(2+) to L(1)(H(2)O)RhH(2+) is kinetically independent of [H(+)], k/M(-1) s(-1) = 0.30. The difference in [H(+)] dependence allows relative rates of the two steps to be manipulated to generate either L(1)(H(2)O)Rh(2+) or L(1)(H(2)O)RhH(2+) as the final product.     

Use of phosphorus ligand NMR probes to investigate electronic and second-sphere solvent effects in ligand substitution reactions at manganese(II) and manganese(III)

Manganese/ligand association dynamics were studied using a series of structurally related anionic phosphorus ester ligand probes [CH(3)OP(O)(X)(Y)(-), where X = CH(3)O, CH(3)CH(2), or H and Y = O, S, or BH(3)]. Reactions of the probe ions with Mn(H(2)O)(6)(2+) and a manganese(III) porphyrin (Mn(III)TMPyP(5+)) were studied in aqueous solution by paramagnetic (31)P NMR line-broadening techniques. A satisfactory linear free energy relationship for reactions of the probe ions with Mn(H(2)O)(6)(2+) and Mn(III)TMPyP(5+) required consideration of both the basicity and solvent affinity of the probe ligands: log(k(app)) = log(k(0)) + alpha pK(a) + beta log(K(ext)), where k(0), alpha, and beta are metal complex dependent parameters and pK(a) and K(ext) represent the measured Bronsted acidity and water/n-butanol extraction constant for the probe anions, respectively. Reactions of Mn(H(2)O)(6)(2+) were relatively insensitive to changes in ligand basicity (alpha = -0.04) and favored the more hydrophilic anions (beta = -0.54). These observations are consistent with a dissociative ligand exchange mechanism wherein the outer-sphere complex is stabilized by hydrogen bonding between Mn(H(2)O)(6)(2+) and the incoming ligand. In contrast, reactions with Mn(III)TMPyP(5+) are accelerated by decreases in both the basicity (alpha = -0.43) and the hydrophilicity (beta = +0.97) of the probe. We conclude that reactions of Mn(III)TMPyP(5+) are also dissociative but that the aromatic groups of the porphyrin provide a hydrophobic environment surrounding the ligand binding site in Mn(III)TMPyP(5+). Thus, the probe/water solvent interactions must be significantly weakened in order to form the outer-sphere complex that leads to ligand substitution. This work demonstrates the utility of phosphorus relaxation enhancement (PhoRE) techniques for characterizing the second coordination sphere environment of metal complexes leading to ligation and will allow comparison of the second coordination spheres of Mn(H(2)O)(6)(2+) and Mn(III)TMPyP(5+) to those of other metal complexes.     

Bis(amido)ruthenium(IV) Complexes with 2,3-Diamino-2,3-dimethylbutane. Crystal Structure and Reversible Ru(IV)-Amide/Ru(III)-Amine and Ru(IV)-Amide/Ru(II)- Amine Redox Couples in Aqueous Solution

Two bis(amido)ruthenium(IV) complexes, [Ru(IV)(bpy)(L-H)(2)](2+) and [Ru(IV)(L)(L-H)(2)](2+) (bpy = 2,2'-bipyridine, L = 2,3-diamino-2,3-dimethylbutane, L-H = (H(2)NCMe(2)CMe(2)NH)(-)), were prepared by chemical oxidation of [Ru(II)(bpy)(L)(2)](2+) and the reaction of [(n-Bu)(4)N][Ru(VI)NCl(4)] with L, respectively. The structures of [Ru(bpy)(L-H)(2)][ZnBr(4)].CH(3)CN and [Ru(L)(L-H)(2)]Cl(2).2H(2)O were determined by X-ray crystal analysis. [Ru(bpy)(L-H)(2)][ZnBr(4)].CH(3)CN crystallizes in the monoclinic space group P2(1)/n with a = 12.597(2) ?, b = 15.909(2) ?, c = 16.785(2) ?, beta = 91.74(1) degrees, and Z = 4. [Ru(L)(L-H)(2)]Cl(2).2H(2)O crystallizes in the tetragonal space group I4(1)/a with a = 31.892(6) ?, c = 10.819(3) ?, and Z = 16. In both complexes, the two Ru-N(amide) bonds are cis to each other with bond distances ranging from 1.835(7) to 1.856(7) ?. The N(amide)-Ru-N(amide) angles are about 110 degrees. The two Ru(IV) complexes are diamagnetic, and the chemical shifts of the amide protons occur at around 13 ppm. Both complexes display reversible metal-amide/metal-amine redox couples in aqueous solution with a pyrolytic graphite electrode. Depending on the pH of the media, reversible/quasireversible 1e(-)-2H(+) Ru(IV)-amide/Ru(III)-amine and 2e(-)-2H(+) Ru(IV)-amide/Ru(II)-amine redox couples have been observed. At pH = 1.0, the E degrees is 0.46 V for [Ru(IV)(bpy)(L-H)(2)](2+)/[Ru(III)(bpy)(L)(2)](3+) and 0.29 V vs SCE for [Ru(IV)(L)(L-H)(2)](2+)/[Ru(III)(L)(3)](3+). The difference in the E degrees values for the two Ru(IV)-amide complexes has been attributed to the fact that the chelating saturated diamine ligand is a better sigma-donor than 2,2'-bipyridine.     

Spectroscopic and catalytic characterization of a functional Fe(III)Fe(II) biomimetic for the active site of uteroferrin and protein cleavage

A mixed-valence complex, [Fe(III)Fe(II)L1(μ-OAc)(2)]BF(4)·H(2)O, where the ligand H(2)L1 = 2-{[[3-[((bis(pyridin-2-ylmethyl)amino)methyl)-2-hydroxy-5-methylbenzyl](pyridin-2-ylmethyl)amino]methyl]phenol}, has been studied with a range of techniques, and, where possible, its properties have been compared to those of the corresponding enzyme system purple acid phosphatase. The Fe(III)Fe(II) and Fe(III)(2) oxidized species were studied spectroelectrochemically. The temperature-dependent population of the S = 3/2 spin states of the heterovalent system, observed using magnetic circular dichroism, confirmed that the dinuclear center is weakly antiferromagnetically coupled (H = -2JS(1)·S(2), where J = -5.6 cm(-1)) in a frozen solution. The ligand-to-metal charge-transfer transitions are correlated with density functional theory calculations. The Fe(III)Fe(II) complex is electron paramagnetic resonance (EPR)-silent, except at very low temperatures (<2 K), because of the broadening caused by the exchange coupling and zero-field-splitting parameters being of comparable magnitude and rapid spin-lattice relaxation. However, a phosphate-bound Fe(III)(2) complex showed an EPR spectrum due to population of the S(tot) = 3 state (J= -3.5 cm(-1)). The phosphatase activity of the Fe(III)Fe(II) complex in hydrolysis of bis(2,4-dinitrophenyl)phosphate (k(cat.) = 1.88 × 10(-3) s(-1); K(m) = 4.63 × 10(-3) mol L(-1)) is similar to that of other bimetallic heterovalent complexes with the same ligand. Analysis of the kinetic data supports a mechanism where the initiating nucleophile in the phosphatase reaction is a hydroxide, terminally bound to Fe(III). It is interesting to note that aqueous solutions of [Fe(III)Fe(II)L1(μ-OAc)(2)](+) are also capable of protein cleavage, at mild temperature and pH conditions, thus further expanding the scope of this complex's catalytic promiscuity.     

Precise investigation of the axial ligand substitution mechanism on a hydrogenphosphato-bridged lantern-type platinum(III) binuclear complex in acidic aqueous solution

Detailed equilibrium and kinetic studies on axial water ligand substitution reactions of the "lantern-type" platinum(III) binuclear complex, [Pt(2)(mu-HPO(4))(4)(H(2)O)(2)](2)(-), with halide and pseudo-halide ions (X(-) = Cl(-), Br(-), and SCN(-)) were carried out in acidic aqueous solution at 25 degrees C with I = 1.0 M. The diaqua Pt(III) dimer complex is in acid dissociation equilibrium in aqueous solution with -log K(h1) = 2.69 +/- 0.04. The consecutive formation constants of the aquahalo complex () and the dihalo complex () were determined spectrophotometrically to be log = 2.36 +/- 0.01 and log = 1.47 +/- 0.01 for the reaction with Cl(-) and log = 2.90 +/- 0.04 and log = 2.28 +/- 0.01 for the reaction with Br(-), respectively. In the kinetic measurements carried out under the pseudo-first-order conditions with a large excess concentration of halide ion compared to that of Pt(III) dimer (C(X)()- > C(Pt)), all of the reactions proceeded via a one-step first-order reaction, which is a contrast to the consecutive two-step reaction for the amidato-bridged platinum(III) binuclear complexes. The conditional first-order rate constant (k(obs)) depended on C(X)()- as well as the acidity of the solution. From kinetic analyses, the rate-limiting step was determined to be the first substitution process that forms the monohalo species, which is in rapid equilibrium with the dihalo complex. The reaction with 4-penten-1-ol was also kinetically investigated to examine the reactivity of the lantern complex with olefin compounds.     

Kinetics and mechanism of iron(III) dissociation from the dihydroxamate siderophores alcaligin and rhodotorulic acid

The kinetics and mechanism of siderophore ligand dissociation from their fully chelated Fe(III) complexes is described for the highly preorganized cyclic tetradentate alcaligin and random linear tetradentate rhodotorulic acid in aqueous solution at 25 degrees C (Fe2L3 + 6H+ reversible 2 Fe3+ aq + 3 H2L). At siderophore:Fe(III) ratios where Fe(III) is hexacoordinated, kinetic data for the H(+)-driven ligand dissociation from the Fe2L3 species is consistent with a singly ligand bridged structure for both the alcaligin and rhodotorulic acid complexes. Proton-driven ligand dissociation is found to proceed via parallel reaction paths for rhodotorulic acid, in contrast with the single path previously observed for the linear trihydroxamate siderophore ferrioxamine B. Parallel paths are also available for ligand dissociation from Fe2(alcaligin)3, although the efficiency of one path is greatly diminished and dissociation of the bis coordinated complex Fe(alcaligin)(OH2)2+ is extremely slow (k = 10(-5) M-1 s-1) due to the high degree of preorganization in the alcaligin siderophore. Mechanistic interpretations were further confirmed by investigating the kinetics of ligand dissociation from the ternary complexes Fe(alcaligin)(L) in aqueous acid where L = N-methylacetohydroxamic acid and glycine hydroxamic acid. The existence of multiple ligand dissociation paths is discussed in the context of siderophore mediated microbial iron transport.     

The highest water exchange rate ever measured for a Gd(III) chelate

The complex [Gd(L)(H2O)]3- (H(6)L =N,N'-bis(6-carboxy-2-pyridylmethyl)ethylenediamine-N,N'-methylenephosphonic acid) displays the highest water exchange rate ever measured for a Gd(III) chelate (k(298)(ex)= 8.8 x 10(8) s(-1)), which is attributed to the flexibility of the metal coordination environment.     

Electrosynthesis of adipic acid by undivided cell electrolysis

A preparative method for synthesis of adipic acid in 47% yield was developed. The method is based on cyclohexanol oxidation in an undivided cell on the NiOOH electrode in aqueous alkali. A possibility of the step-by-step process was studied: oxidation of cyclohexanol to cyclohexanone (75% yield) and subsequent oxidation of cyclohexanone to adipic acid (52% yield). The electrosynthesis of adipic acid is accompanied by the formation of minor amounts (up to 10%) of glutaric and succinic acids.     

Reductions by titanium(II) as catalyzed by titanium(IV)

The cobalt(III) complexes, [(NH3)5CoBr]2+ and [(NH3)5CoI]2+ are reduced by Ti(II) solutions containing Ti(IV), generating nearly linear (zero-order) profiles that become curved only during the last few percent of reaction. Other Co(III)-Ti(II) systems exhibit the usual exponential traces with rates proportional to [Co(III)]. Observed kinetics of the biphasic catalyzed Ti(II)-Co(III)Br and Ti(II)-Co(III)I reactions support the reaction sequence: [Ti(II)(H20)n]2+ + [Ti(IV)F5]- (k1)<==>(k -1) [Ti(II)(H2O)(n-1)]2+ + [(H2O)Ti(IV)F5]-, [Ti(II)(H2O)(n-1)]2+ + Co(III) (k2)--> Ti(III) + Co(II) with rates determined mainly by the slow Ti(IV)-Ti(II) ligand exchange (k1 = 9 x 10(-3) M(-1) s(-1) at 22 degrees C). Computer simulations of the catalyzed Ti(II)-Co(III) reaction in perchlorate-triflate media yield relative rates for reduction by the proposed active [Ti(II)(H2O)(n-1)]2+ intermediate; k(Br)/k(I) = 8.     

A comparative mechanistic study of the reversible binding of NO to a water-soluble octa-cationic Fe(III) porphyrin complex

The water-soluble, non-mu-oxo dimer-forming porphyrin, [5,10,15,20-tetrakis-4'-t-butylphenyl-2',6'-bis-(N-methylene-(4'-t-butylpyridinium))porphyrinato]iron(III) octabromide, (P(8+))Fe(III), with eight positively charged substituents in the ortho positions of the phenyl rings, was characterized by UV-vis and 1H NMR spectroscopy and 17O NMR water-exchange studies in aqueous solution. Spectrophotometric titrations of (P(8+))Fe(III) indicated a pKa1 value of 5.0 for coordinated water in (P(8+))Fe(III)(H2O)2. The monohydroxo-ligated (P(8+))Fe(III)(OH)(H2O) formed at 5 < pH < 12 has a weakly bound water molecule that undergoes an exchange reaction, k(ex) = 2.4 x 10(6) s(-1), significantly faster than water exchange on (P(8+))Fe(III)(H2O)2, viz. k(ex) = 5.5 x 10(4) s(-1) at 25 degrees C. The porphyrin complex reacts with nitric oxide to yield the nitrosyl adduct, (P(8+))Fe(II)(NO+)(L) (L = H2O or OH-). The diaqua-ligated (P(8+))Fe(III)(H2O)2 binds and releases NO according to a dissociatively activated mechanism, analogous to that reported earlier for other (P)Fe(III)(H2O)2 complexes. Coordination of NO to (P(8+))Fe(III)(OH)(H2O) at high pH follows an associative mode, as evidenced by negative deltaS(double dagger)(on) and deltaV(double dagger)(on) values measured for this reaction. The observed ca. 10-fold decrease in the NO binding rate on going from six-coordinate (P(8+))Fe(III)(H2O)2 (k(on) = 15.1 x 10(3) M(-1) s(-1)) to (P(8+))Fe(III)(OH)(H2O) (k(on) = 1.56 x 10(3) M(-1) s(-1) at 25 degrees C) is ascribed to the different nature of the rate-limiting step for NO binding at low and high pH, respectively. The results are compared with data reported for other water-soluble iron(III) porphyrins with positively and negatively charged meso substituents. Influence of the porphyrin periphery on the dynamics of reversible NO binding to these (P)Fe(III) complexes as a function of pH is discussed on the basis of available experimental data.     

Kinetics of oxidation of nitrosodisulfonate anion radical with a metallo-superoxide

The metal bound superoxide in μ-superoxo-bis[pentaamminecobalt(III)](5+) (1) oxidizes the nitrosodisulfonate anion radical (NDS(2-)) by two electrons. Oxidized NDS(2-) quickly decomposes to SO(4)(2-) and NO. 1 is itself reduced to the corresponding hydroperoxo complex which also decomposes fast to Co(ii), NH(4)(+) ions and oxygen. 1.5 moles of volatile products formed per mole of 1 mixed with excess NDS(2-). In the absence of superoxide in a bridged complex, e.g. the μ-amido-bis[pentaamminecobalt(III)](5+) complex fails to oxidize the nitroxyl radicals, NDS(2-), TEMPO and 4-oxo TEMPO. With excess NDS(2-) over 1, the reaction is first-order with respect to [1], [NDS(2-)] and inverse first order in [H(+)]. The activation entropy, ΔS(≠), is largely negative, increased ionic strength decreased the rate and a Br?nsted plot is fairly linear with a negative slope. Oxidant μ-superoxo-bis[(ethylenediamine)(diethylenetriamine)cobalt(III)](5+) has ligands sterically more crowded though more basic than ammonia in 1. It oxidizes NDS(2-) much more slowly. No solvent kinetic isotope effect (k(H(2)O/D(2)O)≈ 1) could be seen; a spin-adduct formation by the conjugate base of 1 followed by electron transfer is postulated.     

The catenation and isomerisation effects on stability constants of complexes formed by some diprotic acids

Stability constants (K(ijk)) of complexes Na(i)K(j)H(k)L(+i+j+k-2) (0相似文献