Microrough cobalt-chromium alloy surfaces for Paclitaxel delivery: preparation, characterization, and in vitro drug release studies

Cobalt-chromium (Co-Cr) alloys have extensive biomedical applications including drug-eluting stents (DES). This study investigates the use of eight different microrough Co-Cr alloy surfaces for delivering paclitaxel (PAT) for potential use in DES. The eight different surfaces include four bare microrough and four self-assembled monolayer (SAM) coated microrough surfaces. The bare microrough surfaces were prepared by grit blasting Co-Cr with glass beads (50 and 100 μm in size) and Al(2)O(3) (50 and 110 μm). The SAM coated surfaces were prepared by depositing a -COOH terminated phosphonic acid monolayer on the different microrough surfaces. PAT was then deposited on all the bare and SAM coated microrough surfaces. The surfaces were characterized using scanning electron microscopy (SEM), 3D optical profilometry, and Fourier transform infrared spectroscopy (FTIR). SEM showed the different morphologies of microrough surfaces without and with PAT coating. An optical profiler showed the 3D topography of the different surfaces and the changes in surface roughness and surface area after SAM and PAT deposition. FTIR showed ordered SAMs were formed on glass bead grit blasted surfaces, while the molecules were disordered on Al(2)O(3) grit blasted surfaces. Also, FTIR showed the successful deposition of PAT on these surfaces. The PAT release was investigated for up to two weeks using high performance liquid chromatography. Al(2)O(3) grit blasted bare microrough surfaces showed sustained release profiles, while the glass bead grit blasted surfaces showed burst release profiles. All SAM coated surfaces showed biphasic drug release profiles, which is an initial burst release followed by a slow and sustained release. SAM coated Al(2)O(3) grit blasted surfaces prolonged the sustained release of PAT in a significant amount during the second week of drug elution studies, while this behavior was not observed for any other surfaces used in this study. Thus, this study demonstrates the use of different microrough Co-Cr alloy surfaces for delivering PAT for potential applications in DES and other medical devices.     

Orientational behavior of thermotropic liquid crystals on surfaces presenting electrostatically bound vesicular stomatitis virus

We report the orientational behavior of nematic phases of 4-cyano-4'-pentylbiphenyl (5CB) on cationic, anionic, and nonionic surfaces before and after contact of these surfaces with solutions containing the negatively charged vesicular stomatitis virus (VSV). The surfaces were prepared on evaporated films of gold by either adsorption of poly-L-lysine (cationic) or formation of self-assembled monolayers (SAMs) from HS(CH2)2SO3- (anionic) or HS(CH2)11(OCH2CH2)4OH (nonionic). Prior to treatment with virus, we measured the initial orientation of 5CB (delta epsilon = epsilon(parallel) - epsilon(perpendicular) > 0) to be parallel to the cationic surfaces (planar anchoring) but perpendicular (homeotropic) after equilibration for 5 days. A similar transition from planar to homeotropic orientation of 5CB was observed on the anionic surfaces. Only planar orientations of 5CB were observed on the nonionic surfaces. Because N-(4-methoxybenzylidene)-4-butylaniline (MBBA, delta epsilon = epsilon(parallel) - epsilon(perpendicular) < 0) exhibited planar alignment on all surfaces, the time-dependent alignment of 5CB on the ionic surfaces is consistent with a dipolar coupling between the 5CB and electrical double layers formed at the ionic interfaces. Treatment ofpoly-L-lysine-coated gold films (cationic) with purified solutions of VSV containing 10(8)-10(10) plaque-forming units per milliliter (pfu/mL) led to the homeotropic alignment of 5CB immediately after contact of 5CB with the surface. In contrast, treatment of anionic surfaces and nonionic surfaces with solutions of VSV containing approximately 10(10) pfu/mL did not cause immediate homeotropic alignment of 5CB. These results and others suggest that homeotropic alignment of 5CB on cationic surfaces treated with VSV of titer > or = 10(8) pfu/mL reflects the presence of virus electrostatically bound to these surfaces.     

Atomic and electronic structure of unreduced and reduced CeO2 surfaces: a first-principles study

The atomic and electronic structure of (111), (110), and (100) surfaces of ceria (CeO2) were studied using density-functional theory within the generalized gradient approximation. Both stoichiometric surfaces and surfaces with oxygen vacancies (unreduced and reduced surfaces, respectively) have been examined. It is found that the (111) surface is the most stable among the considered surfaces, followed by (110) and (100) surfaces, in agreement with experimental observations and previous theoretical results. Different features of relaxation are found for the three surfaces. While the (111) surface undergoes very small relaxation, considerably larger relaxations are found for the (110) and (100) surfaces. The formation of an oxygen vacancy is closely related to the surface structure and occurs more easily for the (110) surface than for (111). The preferred vacancy location is in the surface layer for CeO2(110) and in the subsurface layer (the second O-atomic layer) for CeO2(111). For both surfaces, the O vacancy forms more readily than in the bulk. An interesting oscillatory behavior is found for the vacancy formation energy in the upper three layers of CeO2(111). Analysis of the reduced surfaces suggests that the additional charge resulting from the formation of the oxygen vacancies is localized in the first three layers of the surface. Furthermore, they are not only trapped in the 4f states of cerium.     

Influence of solution chemistry on the deposition and detachment kinetics of RNA on silica surfaces

The deposition kinetics of RNA extracted from both virus and bacteria on silica surfaces were examined in both monovalent (NaCl) and divalent (CaCl(2)) solutions under a wide range of environmentally relevant ionic strength and pH conditions by utilizing a quartz crystal microbalance with dissipation (QCM-D). To better understand the RNA deposition mechanisms, QCM-D data were complemented by diffusion coefficients and zeta potentials of RNA as a function of examined solution chemistry conditions. Favorable deposition of RNA on poly-l-lysine-coated (positively charged) silica surfaces was governed by the convective-diffusive transport of RNA to the surfaces. The deposition kinetics of RNA on bare silica surfaces were controlled by classic Derjaguin-Landau-Verwey-Overbeek (DLVO) interactions. The presence of divalent cations (Ca(2+)) in solutions greatly enhanced the deposition kinetics of RNA on silica surfaces. Solution pH also affected the deposition behavior of RNA on silica surfaces. Release experiments showed that detachment of RNA from silica surfaces was significant in NaCl solutions, whereas, the deposited RNA on silica surfaces in CaCl(2) solutions was more likely to be irreversible.     

Poly(N-isopropylacrylamide)-based thermo-responsive surfaces with controllable cell adhesion

Poly(N-isopropylacrylamide) (PNIPAAm)-based thermo-responsive surfaces can switch their wettability (from wettable to non-wettable) and adhesion (from sticky to non-sticky) according to external temperature changes. These smart surfaces with switchable interfacial properties are playing increasingly important roles in a diverse range of biomedical applications; these controlling cell-adhesion behavior has shown great potential for tissue engineering and disease diagnostics. Herein we reviewed the recent progress of research on PNIPAAm-based thermo-responsive surfaces that can dynamically control cell adhesion behavior. The underlying response mechanisms and influencing factors for PNIPAAm-based surfaces to control cell adhesion are described first. Then, PNIPAAm-modified two-dimensional flat surfaces for cell-sheet engineering and PNIPAAm-modified three-dimensional nanostructured surfaces for diagnostics are summarized. We also provide a future perspective for the development of stimuli-responsive surfaces.     

Effect of oxidized silicon (SiOx) surfaces functionalization on real‐time PCR by Lab‐on‐a‐chip microdevices

There is a great need to improve the biocompatibility of silicon‐based lab‐on‐chip substrate materials for reliable quantitative analysis of biological solutions. These advanced microdevice surfaces need not only be biocompatible but also have surfaces of defined wettability characteristics. The inhibition of biomolecular activity due to microdevice surface interaction is common and can result in inaccurate results or decreased reaction yields. In this work we investigate different techniques for the chemical functionalization of oxidized silicon (SiO_x) surfaces in order to: (i) obtain defined hydrophobic/hydrophilic surfaces; and (ii) increase the efficiency of performing Real‐Time Polymerase Chain Reaction (PCR) on a silicon‐based lab‐on‐chip. Silicon oxide surfaces are functionalized by grafting alkylic chain silanes and poly(ethylene glycol) (PEG) chains to the surfaces, rendering them hydrophobic or hydrophilic. Functionalized surfaces are characterized through contact angle and atomic force microscopy (AFM) measurements, showing stable hydrophobic surfaces with contact angles of 69–78° and layer thicknesses of 11–15 Å and hydrophilic surfaces displaying contact angles of 5–6° and thicknesses of 22–52 Å. PCR experiments carried out directly on bare silicon oxide lab‐on‐chip surfaces show low yields of DNA amplification. Hydrophobic surfaces decrease the inhibition of PCR. Hydrophilic surfaces are a major improvement on the bare silicon oxide exhibiting the same maximum reaction yield as obtained with a standard thermocycler. We have found that the best results are associated with PEG modified surfaces, which prove very suitable for the fabrication of reliable PCR silicon lab‐on‐chips. Copyright © 2011 John Wiley & Sons, Ltd.     

Sorption of U(VI) onto granite surfaces: A kinetic approach

Surface sorption experiments of U(VI) onto the surfaces of a Korean granite rock are carried out in order to investigate the kinetics and reversibility of U(VI) sorption as a function of pH and surface types such as fresh intact surfaces and natural fracture surfaces. It was shown that the effect of pH is significant in the sorption of U(VI) onto both types of the granite surfaces. However the sorption rates do not greatly depend upon the pH regardless of the surface types. A two-step first order kinetic behavior dominates onto both the intact surfaces and natural fracture surfaces of granite and that the linearization approach of the kinetic model agrees well with experimental sorption data. The desorption results showed that the sorption process of U(VI) was a little irreversible for the two types of granite surfaces regardless of pH and surface types. This kinetic approach could give a better understanding of U(VI) sorption onto granite surfaces depending on pH and surface types. This revised version was published online in July 2006 with corrections to the Cover Date.     

Fabrication and hemocompatibility of cell outer membrane mimetic surfaces on chitosan by layer by layer assembly with polyanion bearing phosphorylcholine groups

Three random copolymers poly(2-methacryloyloxyethyl phosphorylcholine-co-methacrylic acid) (PMAs) were synthesized by free radical polymerization of 2-methacryloyloxyethyl phosphorylcholine (MPC) and methacrylic acid (MA) with different monomer ratios under monomer-starved conditions. The synthesized PMA polyanions were assembled on chitosan (CS) film surfaces via electrostatic interactions. Using layer by layer (LbL) assembly with PMA polyanion and chitosan polycation, PMA/CS multilayer thin films with phosphorylcholine groups on the outer surfaces were fabricated. The modified surfaces were characterized by dynamic contact angle (DCA), X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Hemocompatibility of the surfaces was estimated by protein adsorption and platelet adhesion measurements. The results indicated that cell outer membrane mimetic structures were formed on the modified surfaces with PMA as the outermost layer, and the hemocompatibility of the modified surfaces was significantly improved. This facile method of fabricating cell outer membrane mimetic surfaces may have potential applications in the fields of hemocompatible coatings, drug delivery, and tissue engineering.     

How TiO(2) crystallographic surfaces influence charge injection rates from a chemisorbed dye sensitiser

High-energy metal oxide surfaces are considered to be promising for applications involving surface-adsorbate electron transfer, such as photocatalysis and dye-sensitised solar cells. Here, we compare the efficiency of electron injection into different TiO(2) anatase surfaces. We model the adsorption of a carboxylic acid (formic acid) on anatase (101), (001), (100), (110) and (103) surfaces using density functional theory calculations, and calculate electron injection times from a model dye into these surfaces. We find that the different positions of the conduction band edge of these surfaces determine the rate of electron injection (which is faster for the surfaces with lower-lying conduction band, among them the most stable (101) surface). However, if the dye's injection energy is enforced to be at a fixed energy deep inside each surface's conduction band, then several anatase surfaces, such as the synthetically achievable (001) surface, show rates of injection comparable or faster than the (101) surface. Moreover, because of their higher-lying conduction bands, these minority surfaces are likely to offer higher open-circuit voltages in dye-sensitised solar cells. Therefore, synthetically accessible high-energy anatase surfaces, such as (001)-oriented nanostructures, may be promising candidates for use in dye-sensitised solar cells.     

Characterization of enantiospecific chemisorption on chiral Cu surfaces vicinal to Cu(111) and Cu(100) using density functional theory

Surfaces of simple fcc metals such as Cu with nonzero and unequal Miller indices are intrinsically chiral. Density functional theory (DFT) calculations are a useful way to study the enantiospecific adsorption of small chiral molecules on these chiral metal surfaces. We report DFT calculations of seven chiral molecules on several structurally distinct chiral Cu surfaces. These surfaces include two surfaces with (111)-oriented terraces and one with (100)-oriented terraces. Calculations are also described on a surface that was modified to mimic the surface structures that typically appear on real metal surfaces following thermally driven fluctuations in step edges. Our results provide initial information on how variation in the surface structure of intrinsically chiral metal surfaces can affect the enantiospecific adsorption of small molecules on these surfaces.     

氢原子在Pt及Pt系双金属催化表面吸附的密度泛函理论研究

采用密度泛函理论(dFT)考察了Pt(100)、(110)、(111)三种表面氢原子的吸附行为, 计算了覆盖度为0.25 ML时氢原子在Pt 三种表面和M-Pt(111)双金属(M=Al, Fe, Co, Ni, Cu, Pd)上的最稳定吸附位、表面能以及吸附前后金属表面原子层间弛豫情况. 分析了氢原子在不同双金属表面吸附前后的局域态密度变化以及双金属表面d 带中心偏离费米能级的程度并与氢吸附能进行了关联. 计算结果表明, 在Pt(100), Pt(110)和Pt(111)表面, 氢原子的稳定吸附位分别为桥位、短桥位和fcc 穴位. 三种表面中以Pt(111)的表面能最低, 结构最稳定. 氢原子在不同M-Pt(111)双金属表面上的最稳定吸附位均为fcc 穴位, 其中在Ni-Pt 双金属表面的吸附能最低, Co-Pt 次之. 表明氢原子在Ni-Pt 和Co-Pt 双金属表面的吸附最稳定. 通过对氢原子在M-Pt(111)双金属表面吸附前后的局域态密度变化的分析, 验证了氢原子吸附能计算结果的准确性. 掺杂金属Ni、Co、Fe 的3d-Pt(111)双金属表面在吸附氢原子后发生弛豫, 第一层和第二层金属原子均不同程度地向外膨胀. 此外, 3d金属的掺入使得其对应的M-Pt(111)双金属表面d带中心与Pt 相比更靠近费米能级, 吸附氢原子能力增强, 表明3d-Pt系双金属表面有可能比Pt具有更好的脱氢活性.     

Renewable and optically transparent electroactive indium tin oxide surfaces for chemoselective ligand immobilization and biospecific cell adhesion

In this report, we show the successful transfer of a sophisticated electroactive immobilization and release strategy to an indium tin oxide (ITO) surface to generate (1) optically transparent, robust, and renewable surfaces, (2) inert surfaces that resist nonspecific protein adsorption and cell attachment, and (3) tailored biospecific surfaces for live-cell high-resolution fluorescence microscopy of cell culture. By comparing the surface chemistry properties on both ITO and gold surfaces, we demonstrate the ITO surfaces are superior to gold as a renewable surface, in robustness (durability), and as an optically transparent material for live-cell fluorescence microscopy studies of cell behavior. These advantages will make ITO surfaces a desired platform for numerous biosensor and microarray applications and as model substrates for various cell biological studies.     

Properties of the CdSe(0001), (0001), and (1120) single crystal surfaces: Relaxation, reconstruction, and adatom and admolecule adsorption

Details of the chemical mechanism underlying the growth of colloidal semiconductor nanocrystals remain poorly understood. To provide insight into the subject, we have preformed a comprehensive study of the polar (0001) and (0001) and nonpolar (1120) wurtzite CdSe surfaces that are exposed during crystal growth using first-principles density functional theory (DFT-GGA) calculations. Stabilization of these surfaces by relaxation and reconstruction was considered. Two particular reconstructions of the polar surfaces were examined: vacancy formation on a 2 x 2 unit cell and addition of Se and Cd atoms on the (0001) and (0001) surfaces, respectively. Calculation results indicate that the (1120) is the most stable surface when compared to the two polar surfaces. Furthermore, reconstructions of the (0001) surface are energetically favored when compared to reconstructions of the (0001) facet. Adsorption of Cd and Se atoms and the CdSe molecule on the three relaxed surfaces and two reconstructed (0001) surfaces were also investigated. Several binding sites were considered to determine the most stable binding geometries and energetics. Atomic species preferentially bind in either 2-fold or 3-fold sites, while the CdSe molecule binds parallel to the surface on all of the considered surfaces. Vibrational frequencies of the adspecies were calculated for the most stable binding configurations and were included in the zero point energy correction. Diffusion barriers for the atomic and molecular species were estimated where possible to be between 0.2 and 0.4 eV on the three relaxed surfaces. Thermochemistry of the CdSe molecule binding and dissociation was also investigated. On all considered surfaces, dissociation is preferred to desorption with dissociation only exothermic on the (0001) surface. Comparison of the three relaxed and two reconstructed surfaces indicates that CdSe molecule binding and dissociation is thermodynamically favored on the (0001) surface. This implies that under a reaction-controlled regime, the rate of homoepitaxy would be faster on the (0001) Se terminated surface than on the (0001) and (1120) surfaces, making the (0001) surface of a nanocrystal the primary direction of growth.     

Adsorption and reaction of CO and CO2 on oxidized and reduced SrTiO3(100) surfaces

The adsorption and reaction of CO and CO(2) on oxidized and reduced SrTiO(3)(100) surfaces have been studied with temperature programmed desorption (TPD) and X-ray photoelectron spectroscopy (XPS). XPS results indicate that the oxidized SrTiO(3)(100) surfaces are nearly defect-free with predominantly Ti(4+) ions whereas the sputter-reduced surfaces contain substantial amounts of defects. Both CO and CO(2) are found to adsorb weakly on the oxidized SrTiO(3)(100) surfaces. On sputter-reduced surfaces, enhanced reactivity of CO and CO(2) is observed due to the presence of oxygen vacancy sites, which are responsible for dissociative adsorption of these molecules. Our studies indicate that the CO and CO(2) molecules exhibit relatively weaker interactions with SrTiO(3)(100) compared to those with TiO(2)(110) and TiO(2)(100) surfaces. This is most likely an influence of the Sr cations on the electronic structure of the Ti cations in the mixed oxide of SrTiO(3).     

Using Chemoattractants to Lure Bacteria to Contact‐Killing Surfaces

Antimicrobial surfaces with covalently attached biocidal functionalities only kill microbes that come into direct contact with the surfaces (contact‐killing surfaces). Herein, the activity of contact‐killing surfaces is shown to be enhanced by using gradients in the concentration of soluble chemoattractants (CAs) to attract bacteria to the surfaces. Two natural and nonbiocidal CAs (aspartate and glucose) were used to attract bacteria to model surfaces decorated with quaternary ammonium groups (known to kill bacteria that come into contact with them). These results demonstrate the killing of Escherichia coli and Salmonella typhimurium, two common pathogens, at levels 10‐ to 20‐times greater than that of the native surfaces alone. This approach is general and provides new strategies for the design of active or dynamic contact‐killing surfaces with enhanced antimicrobial activities.     

Electronic and structural properties of the (1010) and (1120) ZnO surfaces

The structural and electronic properties of ZnO (1010) and (1120) surfaces were investigated by means of density functional theory applied to periodic calculations at B3LYP level. The stability and relaxation effects for both surfaces were analyzed. The electronic and energy band properties were discussed on the basis of band structure as well as density of states. There is a significant relaxation in the (1010) as compared to the (1120) terminated surfaces. The calculated direct gap is 3.09, 2.85, and 3.09 eV for bulk, (1010), and (1120) surfaces, respectively. The band structures for both surfaces are very similar.     

Surface and bulk sorption of uranium(VI) onto granite rock

Surface and bulk sorption of U(VI) onto granite rock with different types of surfaces were carried out and the results were compared for the different surfaces such as crushed granite, machined core granite, and core granite with fractured surface. The sorption behavior of U(VI) dependent on surface types was investigated and discussed for contacting time, pH, constituent minerals, and surface area. Results from the sorption experiments were also compared each other in order to analyze the differences in sorption behaviors of U(VI) and to correlate the surface sorption coefficient K_a and the bulk sorption coefficient K_d. The effect of contact time and pH on the sorption of U(VI) onto fractured surfaces was larger than that onto the machined fresh surfaces but smaller than that onto the crushed surfaces. As expected, it was noticed that the surface sorption coefficients of U(VI) for the natural fracture surfaces were greater than those of the machined fresh surfaces due to the higher content of secondary minerals such as calcite and chlorite which acted as stronger sorbents. It is presumed that there are many micro-fractures or micro-pores available for the uranium sorption on the granite surfaces, even on the machined fresh surfaces, and there can be an intrinsic difference between the surface and the bulk sorption due to the different types of surfaces.     

Thermal modulated interaction of aqueous steroids using polymer-grafted capillaries

Poly(N-isopropylacrylamide) (PIPAAm) of controlled molecular weight was densely grafted onto glass capillary lumenal surfaces using surface-initiated atom transfer radical polymerization (ATRP). Temperature-dependent changes of these thermoresponsive brush surfaces with hydrophobic steroids were investigated by exploiting thermoresponsive aqueous wettability changes of the polymer-modified surfaces in microfluidic systems. IPAAm was polymerized on ATRP initiator-immobilized glass surfaces using CuCl/CuCl(2)/tris(dimethylaminoethyl)amine (Me(6)TREN) as an ATRP catalyst in water at 25 degrees C. PIPAAm graft layer thickness and its homogeneity on glass surfaces are controlled by changing ATRP reaction time. Aqueous wettability changes of PIPAAm-grafted surfaces responses drastically changed to both grafted polymer layer thickness and temperature, especially at lower temperatures. Temperature-responsive surface properties of these PIPAAm brushes within capillary inner wall surfaces were then investigated using capillary chromatography. Effective interaction of hydrophobic steroids with dehydrated, hydrophobized PIPAAm-grafted capillary surfaces was observed above 30 degrees C without any column packing materials. Steroid elution behavior from PIPAAm-grafted capillaries contrasted sharply with that from PIPAAm hydrogel-grafted porous monolithic silica capillaries prepared by electron beam (EB) irradiation wherein significant peak broadening was observed at high-temperature regardless of sample hydrophobicity factors (log P values), indicating multistep separation modes in coated monolithic silica capillaries. In conclusion, thermoresponsive polymer-grafted capillary inner wall surfaces prepared by ATRP exhibit useful temperature-dependent surface property alterations effective to regulate interactions with biomolecules without requirements for separation bed packing materials within the capillary lumen.     

Covalently modified silicon and diamond surfaces: resistance to nonspecific protein adsorption and optimization for biosensing

We report the direct covalent functionalization of silicon and diamond surfaces with short ethylene glycol (EG) oligomers via photochemical reaction of the hydrogen-terminated surfaces with terminal vinyl groups of the oligomers, and the use of these monolayers to control protein binding at surfaces. Photochemical modification of Si(111) and polycrystalline diamond surfaces produces EG monolayers linked via Si-C bond formation (silicon) or C-C bond formation (diamond). X-ray photoelectron spectroscopy was used to characterize the monolayer composition. Measurements using fluorescently labeled proteins show that the EG-functionalized surfaces effectively resist nonspecific adsorption of proteins. Additionally, we demonstrate the use of mixed monolayers on silicon and diamond and apply these surfaces to control specific versus nonspecific binding to optimize a model protein sensing assay.     

Adsorption versus covalent, statistically oriented and covalent, site-specific IgG immobilization on poly(vinyl alcohol)-based surfaces

Plain poly(vinyl alcohol) (PVA) surfaces, PVA surfaces tailored with additives (chitosan, chitosan-oligo) and PVA surfaces crosslinked with homo- or hetero-bifunctional amino-linkers (ethylenediamine, hexamethylenediamine, adipic acid dihydrazide, 3-aminophenylboronic acid) were evaluated for their ability to immobilize IgG. Immobilization strategies tested were adsorption as well as covalent, statistically oriented and covalent, site-specific binding of antibodies. The PVA surfaces were optimized with respect to the type of PVA, to PVA concentration and to glass substrate type. The resulting hydrogel surface of choice consists of 4% PVA coated onto adhesive glass. Comparison of modified and unmodified PVA surfaces revealed six surfaces which showed significantly higher loading capacity than plain PVA:PVA surfaces tailored with 2% chitosan resulted in twice greater fluorescence, whereas PVA surfaces oxidized using HIO₄ with and without further crosslinking using adipic acid dihydrazide revealed 2.6-2.8 times greater fluorescence. Yet the greatest fluorescence compared with plain PVA (up to 3.5 times as much) was achieved on PVA surfaces coupled with 3-aminophenylboronic acid activated by means of either 1% or 2.5% glutaraldehyde. Meanwhile, fluorescence signals were similar for statistically oriented IgG and IgG bound site-specifically using IgG activated with sodium meta-periodate.