New synthetic route for selectively substituted 1,n-diamines. Synthesis of N-aryl tetra- and pentamethylenediamines

A general procedure for the synthesis of N-aryltetra- and pentamethylenediamines 1 by acid hydrolysis of N-aryl-N’-acylalkylenediamines 2 under microwave irradiation is described. The precursors 2 are obtained by amination of the corresponding N-(ω-haloalkyl)benzamides with aromatic amines 3.     

An efficient microwave assisted synthesis of novel class of Rhodanine derivatives as potential HIV-1 and JSP-1 inhibitors

(Z)-5-(2-(1H-Indol-3-yl)-2-oxoethylidene)-3-phenyl-2-thioxothiazolidin-4-one (7a-q) derivatives have been synthesized by the condensation reaction of 3-phenyl-2-thioxothiazolidin-4-ones (3a-h) with suitably substituted 2-(1H-indol-3-yl)-2-oxoacetaldehyde (6a-d) under microwave condition. The thioxothiazolidine-4-ones were prepared from the corresponding aromatic amines (1a-e) and di-(carboxymethyl)-trithiocarbonyl (2). The aldehydes (6a-h) were synthesized from the corresponding acid chlorides (5a-d) using HSnBu₃.     

Synthesis of polyfunctional phosphorodithioates and structural analogues mediated by azetidinium ions and epoxides

The nucleophilic ring opening reactions of N,N-dialkyl-3-hydroxy(benzyloxy)azetidinium salts 1 and N,N-dibenzyl-2,3-epoxypropylamine 10 with anions of mono- and dithioacids of phosphorus 2 affords phosphorodithioates (and structural analogues) 3 and 11 possessing S-propyl substituents incorporating 2-hydroxy and 3-dialkylamino functionalities. A strong dependence of the stability of these compounds on structural factors is discussed.     

Molecular structures and ab initio molecular orbital calculations of the optically active derivatives of 1-aminocyclopropane-1-carboxylic acid

The novel optically active derivatives of 2,2′-disubstituted-1-aminocyclopropane-1-carboxylic acid (−)-2 and (+)-3 were synthesised from the spiro-azlactone (+)-1. Oxidation of the diol moiety of (+)-3 gave by ring enlargement the racemic mixture of 2,3-dihydrofuran derivative (±)-6. This conversion is explained by stepwise rearrangement of the initially formed tetrasubstituted cyclopropanecarbaldehyde 4 through zwitterionic's reactive intermediate 5. The formation of (±)-6 is preferred energetically as established by ab initio calculations of the ground states and possible intermediates for that rearrangement. The crystal structure and absolute configuration of the compounds (+)-1, (−)-2, (+)-3 and (−)-7 were determined by single-crystal X-ray diffraction method. All four compounds possess Z-configuration of the cyclopropane ring. The dioxolane ring in the structures (+)-1 and (−)-2 adopts half-chair conformation, while the cyclopropane ring and geminally substituted groups in the structures (−)-2, (+)-3 and (−)-7 possess the anticlinal conformation. The molecules of the compound (+)-1 are connected by very weak intermolecular hydrogen bond of C-H?O type. In the compounds (−)-2, (+)-3 and (−)-7inter- and intramolecular hydrogen bonds of N-H?O type were observed. The spiro-compound (+)-1 exhibited a more pronounced inhibitory activity against the proliferation of murine leukemia and human T-lymphocytes cells than other type of tumor cell lines and normal human fibroblast cells.     

Synthesis, structure, and catalytic activity of organolanthanides with chiral biphenyl-based tridentate amidate ligands

Four new chiral organolanthanide amidate complexes have been readily prepared in good yields via silylamine elimination reaction between Ln[N(SiMe₃)₂]₃ (Ln = Sm, Y, Yb) and chiral amidate ligands, (R)-2-(mesitoylamino)-2′-methoxy-6,6′-dimethyl-1,1′-biphenyl (1H) and (R)-2-(mesitoylamino)-2′-dimethylamino-6,6′-dimethyl-1,1′-biphenyl (2H). The steric effect of the ligand coupled with the size effect of the lanthanide ion plays an important role in complex formation. For example, treatment of 1H with half equiv of Sm[N(SiMe₃)₂]₃ gives the C₂-symmetric bis-ligated amidate complex (σOMe:κO:κN-1)₂SmN(SiMe₃)₂ (3) in 75% yield, while reaction of 1H or 2H with half equiv of Ln[N(SiMe₃)₂]₃ (Ln = Y, Yb) affords the C₁-symmetric bis-ligated amidate complexes [(κO:κN-1)(σOMe:κO:κN-1)]LnN(SiMe₃)₂ (Ln = Y (4), Yb (5) and the C₁-symmetric mono-ligated amidate complex (σNMe₂:κO:κN-2)Y[N(SiMe₃)₂]₂ (6), respectively, in good yields. These organolanthanide amidate complexes have been characterized by various spectroscopic techniques, elemental analyses, and X-ray diffraction analyses. They are active catalysts for asymmetric hydroamination/cyclization of aminoalkenes and ring-opening polymerization of rac-lactide, affording cyclic amines in excellent conversions with good ee values and isotactic-rich polylactides, respectively.     

Synthesis and thermal behavior of cis- and trans-1-tert-butyl-4,5-dimethyl-2-phenyl-2-(trimethylsiloxy)-1-(trimethylsilyl)-1-silacyclohex-4-ene

The cothermolysis of benzoyl(tert-butyl)bis(trimethylsilyl)silane with 2,3-dimethylbutadiene in a sealed tube at 140 °C for 24 h afforded cis- and trans-1-tert-butyl-4,5-dimethyl-2-phenyl-2-(trimethylsiloxy)-1-(trimethylsilyl)-1-silacyclohex-4-ene (2 and 3) in a ratio of approximately 1:1 in 66% combined yield. When cis-silacyclohex-4-ene 2 was heated in a sealed tube at 250 °C for 24 h, dyotropic ring contraction took place to give 1-[(tert-butyl)(trimethylsiloxy)(trimethylsilyl)silyl]-3,4-dimethyl-1-phenylcyclopent-3-ene (4), but not trans-2-tert-butyl-4,5-dimethyl-2-phenyl-1-(trimethylsiloxy)-1-(trimethylsilyl)-1-silacyclohex-4-ene (6). The thermolysis of trans-silacyclohex-4-ene 3 under the same conditions, however, afforded two products, 1-silyl-1-phenylcyclopent-3-ene 4 and trans-1-tert-butyl-4,5-dimethyl-2-phenyl-1-(trimethylsiloxy)-2-(trimethylsilyl)-1-silacyclohex-4-ene (5). The theoretical calculations were carried out to characterize the transition states and other local minima, and to evaluate the activation energies for the dyotropic rearrangement of 2 to 4 and 6, and 3 to 4 and 5. The energy barriers between 2 and 4, between 3 and 4, and between 3 and 5 were evaluated to be 188, 191, 192 kJ mol⁻¹, respectively. The energy barrier between 2 and 6, however, was calculated to be 201 kJ mol⁻¹ or higher. These results are consistent with the experimental finding that the thermal isomerization of 2 affords only 4, but 3 produces both 4 and 5.     

Cyclopalladation of 3-methoxyimino-2-phenyl-3H-indoles

The direct cyclopalladation of 3-methoxyimino-2-(4-chlorophenyl)-3H-indole (1a) and 3-methoxyimino-2-phenyl-3H-indole (1b) results in the regioselective activation of the ortho σ[C(sp², phenyl)-H] bond affording (μ-OAc)₂[Pd{κ²-C,N-C₆H₃-4R-1-(C₈H₄N-3′-NOMe)}]₂ (2) {R = Cl (2a) or H (2b)} that contain a central “Pd(μ-OAc)₂Pd” core. Compounds 2a and 2b reacted with triphenylphosphine (in a molar ratio PPh₃:2 = 2) giving [Pd{κ²-C,N-C₆H₃-4R-1-(C₈H₄N-3′-NOMe)}(OAc)(PPh₃)] (3) {R = Cl (3a) or H (3b)}. Treatment of 2a or 2b with a slight excess of LiCl in acetone produced the metathesis of the bridging ligands and the formation of (μ-Cl)₂[Pd{κ²-C,N-C₆H₃-4R-1-(C₈H₄N-3′-NOMe)}]₂ (4) {R = Cl (4a) or H (4b)} with a central “Pd(μ-Cl)₂Pd” moiety. The reactions of 4a or 4b with deuterated pyridine (py-d₅) or triphenylphosphine gave the monomeric derivatives [Pd{κ²-C,N-C₆H₃-4R-1-(C₈H₄N-3′-NOMe)}Cl(L)] with R = Cl or H and L = py-d₅ (5) or PPh₃ (6). The crystal structure of 6b·1/2CH₂Cl₂ confirmed the mode of binding of the ligand, the nature of the metallated carbon atom and a trans-arrangement of the phosphine ligand and the heterocyclic nitrogen. Theoretical calculations on the free ligands are also reported and have allowed the rationalization of the regioselectivity of the cyclopalladation process.     

Highly selective synthesis of 4(5)-aryl-, 2,4(5)-diaryl-, and 4,5-diaryl-1H-imidazoles via Pd-catalyzed direct C-5 arylation of 1-benzyl-1H-imidazole

Highly selective, practical, and efficient protocols for the preparation of 4(5)-aryl-1H-imidazoles 2, 2,4(5)-diaryl-1H-imidazoles 3, and 4,5-diaryl-1H-imidazoles 1 are described. A key step of these protocols is the regioselective synthesis of 5-aryl-1-benzyl-1H-imidazoles 9 by Pd-catalyzed direct C-5 arylation of commercially available 1-benzyl-1H-imidazole (8) with aryl halides. The three-step synthesis of compounds 3 from 8 also involves the Pd-catalyzed and Cu-mediated direct C-2 arylation of imidazoles 9 with aryl halides under base-free and ligandless conditions. On the other hand, the four-step synthesis of imidazoles 1 from 8 also involves the regioselective bromination of compounds 9 and a Suzuki reaction of the resulting 5-aryl-1-benzyl-4-bromo-1H-imidazoles 11 with arylboronic acids 5 under phase-transfer conditions, followed by N-debenzylation.     

Mono and bimetallic nickel bromide complexes bearing azolate-imine ligands: Synthesis, structural characterization and ethylene polymerization studies

The synthesis of N-(1-(3,5-dimethylpyrazol-1-yl)ethylidene)-2,6-diisopropylaniline (1) and N-(1-(indazol-2-yl)ethylidene)-2,6-diisopropylaniline (2) allowed access to new transition metal complexes. When reacted with dibromo(2,2′-dimethoxyethylether)nickel(II) the complexes [NiBr₂{N-(1-(3,5-dimethylpyrazol-1-yl)ethylidene)-2,6-diisopropylaniline}] (3) and [Ni₂Br₂(μ-Br)₂{N-(1-(indazol-1-yl)ethylidene)-2,6-diisopropylaniline}₂] (4) are yielded, respectively. The addition of MAO generates catalytically active species for the homopolymerization of ethylene. The polymer products were low molecular weight (3-6 K) and a monomodal molecular weight distribution, consistent with the presence of a single active site. In addition, the catalyst was found to efficiently oligomerize higher olefins to high molecular weights with narrow PDIs.     

[4+2] Cycloaddition of 1-aminodienes and 2-substituted vinylphosphonates: application to asymmetric synthesis of 3-amino-5-phosphono-1-cyclohexene derivatives

N-Butadienylsuccinimide (1), iso-propyl N-butadienyl-(S)-pyroglutamate (5) and N-butadienyl-(R)-4-phenyloxazolidin-2-one (6) reacted with vinylphosphonates, vicinally-substituted (2) by electronwithdrawing groups (CO₂Me, CN, COMe), to furnish [4+2] cycloadducts (3-4,7-10, and 11-14) in moderate to good yields (40-88%). The reactions were highly selective: regioselectivity of 95-100%, endoselectivity of 75-92% and facial selectivity of 80-95%. The major diastereoisomers were fully characterized by ¹H and ¹³C NMR spectroscopy.     

A simple synthesis of 4-(2-aminoethyl)-5-hydroxy-1H-pyrazoles

A simple four-step synthesis of 4-(2-aminoethyl)-5-hydroxy-1H-pyrazoles 8 (or their 1H-pyrazol-3(2H)-one tautomers 8′) as the pyrazole analogues of histamine was developed. First, enamino lactam 3 was prepared as the key intermediate in two steps from 2-pyrrolidinone (1). Next, acid-catalysed ‘ring switching’ transformations of 3 with monosubstituted hydrazines 4 gave N-[(1-substituted 5-hydroxy-1H-pyrazol-4-yl)ethyl]benzamides 7a-k and N-[2-(2-heteroaryl-3-oxo-2,3-dihydro-1H-pyrazol-4-yl)ethyl]benzamides 7′l-o. Benzamides 7a-k and 7′l-o were finally hydrolysed by heating in 6 M hydrochloric acid to furnish 1-substituted 4-(2-aminoethyl)-5-hydroxy-1H-pyrazoles 8a-k and 4-(2-aminoethyl)-2-heteroaryl-1H-pyrazol-3(2H)-ones 8′l-o in good overall yields.     

Preparation, structural characterisation and electrochemical properties of iron(0) and tungsten(0) carbonyl complexes with 1-(diphenylphosphanyl)-1′-vinylferrocene and 1-(diphenylphosphanyl)-1′-(dimethylvinylsilyl)ferrocene as P-monodentate ligands

A new organometallic phosphanylalkene, 1-(diphenylphosphanyl)-1′-(dimethylvinylsilyl)ferrocene (2) was prepared and—together with 1-(diphenylphosphanyl)-1′-vinylferrocene (1)—studied as a ligand in iron- and tungsten-carbonyl complexes. The following complexes featuring the mentioned phosphanylalkenes as P-monodentate donors were isolated and characterised by spectral methods: [Fe(CO)₄(L-κP)] (4, L = 1; 5, L = 2) and trans-[W(CO)₄(L-κP)₂] (6, L = 1; 7, L = 2). In addition, the solid-state structures of 4 and 6 have been determined by single-crystal X-ray diffraction and the electrochemical properties of compounds 1, 2, 4 and 6 were studied by cyclic voltammetry at platinum electrode.     

First synthesis of nitro-substituted 2,2-diphenyl-2H-1-benzopyrans via the ipso-nitration reaction

The first synthesis of a series of nitro-substituted 2,2-diphenyl-2H-1-benzopyrans is reported. Our synthetic approach is based on a linear synthesis in two steps from appropriate brominated 2,2-diphenyl-2H-1-benzopyrans 12-17, which requires the preliminary preparation of bromophenols 7-11. These latter were easily obtained by the reaction of phenols 1-5 with a mild and selective brominating agent tetrabutylammonium tribromide (TBA·Br₃). The key intermediates 12-17 were efficiently elaborated through an univocal classic chromenization between the commercially available 1,1-diphenyl-2-yn-1-ol and the brominated phenols 6-11. The compounds 12-17 so obtained were converted into arylboronic acids 18-23 by a metalation/boronylation sequence, followed by acid hydrolysis. From advanced building blocks 18-23, the introduction of nitro group, which constitutes the ultimate step of our strategy, was achieved by an ipso-nitration reaction using the Crivello's reagent. This highly selective method provides only the ipso-nitrated products 24-29 in moderate to high yield.     

Enantioselective synthesis of (1S,2S)-1,2-di-tert-butyl and (1R,2R)-1,2-di-(1-adamantyl)ethylenediamines

An enantioselective synthesis of sterically congested 1,2-di-tert-butyl and 1,2-di-(1-adamantyl)ethylenediamines has been developed. Thus, diastereomerically pure trans-1-apocamphanecarbonyl-4,5-dimethoxy-2-imidazolidinones 6 and 7 were successfully prepared by optical resolution of (±)-trans-4,5-dimethoxy-2-imidazolidinone using apocamphanecarbonyl chloride (MAC-Cl) followed by stereospecific and stepwise substitution of the dimethoxyl groups using tert-butyl or 1-adamantyl cuprates to provide (4S,5S)-4,5-di-tert-butyl and (4R,5R)-4,5-di-(1-adamantyl)-2-imidazolidinones 12 and 15, respectively. Furthermore, N-acetyl 4,5-di-tert-butyl and 4,5-di-(1-adamantyl)-2-imidazolidinones 16a,b were enantioselectively deacetylated using a catalytic oxazaborolidine system to provide enantiopure 1-p-tolylsulfonyl-4,5-di-tert-butyl-2-imidazolidinones 12 and 19 and 1-p-tolylsulfonyl-4,5-di-(1-adamantyl)-2-imidazolidinones 18 and 20, respectively. Finally, N-p-tolylsulfonyl-2-imidazolidinones 12 and 15 were treated with 30 equiv of Ba(OH)₂·8H₂O to achieve ring cleavage and to provide (1S,2S)-1,2-di-tert-butylethylenediamine 3 and (1R,2R)-1,2-di-(1-adamantyl)ethylenediamine 4.     

Enantioselective synthesis of axially chiral 1-(1-naphthyl)isoquinolines and 2-(1-naphthyl)pyridines through sulfoxide ligand coupling reactions

Racemic 1-(1′-isoquinolinyl)-2-naphthalenemethanol rac-12 was prepared through a ligand coupling reaction of racemic 1-(tert-butylsulfinyl)isoquinoline rac-7 with the 1-naphthyl Grignard reagent 10. Resolution of rac-12 was achieved through chromatographic separation of the Noe-lactol derivatives 14 and 15, providing (R)-(−)-12 of >99% ee and (S)-(+)-12 of 90% ee. The ligand coupling reaction of optically enriched sulfoxide (S)-(−)-7 (62% ee) with Grignard reagent 10 furnished rac-12, with the absence of stereoinduction resulting from competing rapid racemisation of the sulfoxide 7. Reaction of optically enriched (S)-(−)-7 with 2-methoxy-1-naphthylmagnesium bromide was also accompanied by racemisation of the sulfoxide 7, and furnished optically active (+)-1-(2′-methoxy-1′-naphthyl)isoquinoline (+)-3b in low enantiomeric purity (14% ee). The absolute configuration of (+)-3b was assigned as R using circular dichroism spectroscopy, correcting an earlier assignment based on the Bijvoet method, but in the absence of heavy atoms. Optically active 2-pyridyl sulfoxides were found not to undergo racemisation analogous to the 1-isoquinolinyl sulfoxide 7, with the ligand coupling reactions of (R)-(+)- and (S)-(−)-2-[(4′-methylphenyl)sulfinyl]-3-methylpyridines, (R)-(+)-17 and (S)-(−)-17, with 2-methoxy-1-naphthylmagnesium bromide providing (−)- and (+)-2-(2′-methoxy-1′-naphthyl)-3-methylpyridines, (−)-18 and (+)-18, in 53 and 60% ee, respectively. The free energy barriers to internal rotation in 3b and 18 have been determined, and the isoquinoline (R)-(−)-12 examined as a ligand in the enantioselectively catalysed addition of diethylzinc to benzaldehyde; (R)-(−)-12 was also converted to (R)-(−)-N,N-dimethyl-1-(1′-isoquinolinyl)-2-naphthalenemethanamine (R)-(−)-19, and this examined as a ligand in the enantioselective Pd-catalysed allylic substitution of 1,3-diphenylprop-2-enyl acetate with dimethyl malonate.     

Pelseneeriol-1 and -2: new furanosesquiterpene alcohols from porostome nudibranch Doriopsilla pelseneeri

The paper reports the first chemical study of the porostome nudibranch Doriopsilla pelseneeri collected off the Portuguese coast (Atlantic Ocean). Two new furanosesquiterpene alcohols, pelseneeriol-1 (1) and pelseneeriol-2 (2), have been isolated together with known compounds, 15-acetoxy-ent-pallescensin-A (5), and dendocarbin-A (6), from the mantle of the nudibranch, whereas euryfuran (3) and drimane ester mixture 4 were identified in the extract of the internal glands. The structures of 1 and 2 have been determined by extensive spectroscopic studies as well as by comparison with literature model compounds. In order to assess the relative stereochemistry of 1 and 2, full NMR assignment of related sponge metabolite microcionin-2 (8) and of co-occurring sesquiterpenes 9-11, that have been re-isolated from the Mediterranean sponge Fasciospongia cavernosa, has been also conducted. In particular, the relative stereochemistry of tricyclic sesquiterpene microcionin-1 (9) has now been rigorously assigned by detailed analysis of NOE difference experiments.     

Stabilization of (N-methyleneamino)imidoylketenes: synthesis of dipyrazolo[1,2-a;1′,2′-d][1,2,4,5]tetrazines

Thermolysis of substituted methyl 1-methyleneamino-4,5-dioxo-4,5-dihydro-1H-pyrrole-2-carboxylates 2a,b led to substituted dimethyl 3,9-dioxo-1,5,7,11-tetrahydro-1H,7H-dipyrazolo[1,2-a;1′,2′-d][1,2,4,5]tetrazine-1,7-dicarboxylates 4a,b and methyl 2,5-dihydro-5-oxo-1H-pyrazole-3-carboxylates 5a,b as minor products. The structure of compound 4a was determined by X-ray crystallography. The proposed mechanism of this conversion includes generation of (N-methyleneamino)imidoylketenes 6a,b and its intramolecular transformation to azomethine imines—5-oxo-2,5-dihydropyrazole-1-methylium-2-ides 7a,b, which undergo dimerization in head-to-tail manner yielding products 4a,b and partially hydrolyse to compounds 5a,b.     

Synthesis and characterization of aluminum complexes of 2-pyrazol-1-yl-ethenolate ligands

The synthesis and the characterization of some new aluminum complexes with bidentate 2-pyrazol-1-yl-ethenolate ligands are described. 2-(3,5-Disubstituted pyrazol-1-yl)-1-phenylethanones, 1-PhC(O)CH₂-3,5-R₂C₃HN₂ (1a, R = Me; 1b, R = Bu^t), were prepared by solventless reaction of 3,5-dimethyl pyrazole or 3,5-di-tert-butyl pyrazole with PhC(O)CH₂Br. Reaction of 1a or 1b with (R¹ = Me, Et) yielded N,O-chelate alkylaluminum complexes (2a, R = R¹ = Me; 2b, R = Bu^t, R¹ = Me; 2c, R = Me, R¹ = Et). Compound 1a was readily lithiated with LiBuⁿ in thf or toluene to give lithiated species 3. Treatment of 3 with 0.5 equiv of MeAlCl₂ or AlCl₃ yielded five-coordinated aluminum complexes [XAl(OC(Ph)CH{(3,5-Me₂C₃HN₂)-1})₂] (4, X = Me; 5, X = Cl). Reaction of 5 with an equiv of LiHBEt₃ generated [Al(OC(Ph)CH{(3,5-Me₂C₃HN₂)-1})₃] (6). Complex 6 was also obtained by reaction of 3 with 1/3 equiv of AlCl₃. Treatment of 5 with 2 equiv of AlMe₃ yielded complex 2a, whereas with an equiv of AlMe₃ afforded a mixture of 2a and [Me(Cl)AlOC(Ph)CH{(3,5-Me₂C₃HN₂)-1}] (7). Compounds 1a, 1b, 2a-2c and 4-6 were characterized by elemental analyses, NMR and IR (for 1a and 1b) spectroscopy. The structures of complexes 2a and 5 were determined by single crystal X-ray diffraction techniques. Both 2a and 5 are monomeric in the solid state. The coordination geometries of the aluminum atoms are a distorted tetrahedron for 2a or a distorted trigonal bipyramid for 5.     

The synthesis of R-3-alkoxy-1-(1′-hydroxyethyl)-4-methoxy-2-(1″-propenyl)benzenes utilizing Corey-Bakshi-Shibata asymmetric reductions

Pyrolysis of the 3-O-allyl derivative 7 of isovanillin followed by alkylation of the derived allylphenol 8 afforded a series of benzaldehyde derivatives 9-11 each of which was transformed by initial treatment with methylmagnesium bromide followed by oxidation of the corresponding alcohols with activated manganese dioxide into a series of ketones 15-17. Palladium(0) catalysed isomerization of the double bond in the prop-2′-enyl side-chain afforded ketones 36-38 which were subjected to the Corey-Bakshi-Shibata asymmetric reduction protocol to afford the R-3-alkoxy-1-(1′-hydroxyethyl)-4-methoxy-2-(1″-propenyl) benzenes 42-44 in yields of approximately 60% and with ee's of 75%.     

First cross-coupling reactions on halogenated 1H-1,2,4-triazole nucleosides

The halogenated 1H-1,2,4-triazole glycosides 6-10 were synthesized by BF₃-activated glycosylation of 3(5)-chloro-1,2,4-triazole (2), 3,5-dichloro-1,2,4-triazole (3), 3,5-dibromo-1,2,4-triazole (4), and 3(5)-bromo-5(3)-chloro-1,2,4-triazole (5) with 1,2,3,4-tetra-O-pivaloyl-β-d-xylopyranose (1). The β-anomeric major products 3-chloro-1-(2,3,4-tri-O-pivaloyl-β-d-xylopyranosyl)-1,2,4-triazole (6β), 3,5-dichloro-1-(2,3,4-tri-O-pivaloyl-β-d-xylopyranosyl)-1,2,4-triazole (7β), and 3,5-dibromo-1-(2,3,4-tri-O-pivaloyl-β-d-xylopyranosyl)-1,2,4-triazole (8β) were used as starting materials for transition metal catalyzed C-C-coupling reactions. Arylations of the triazole ring of 7β, and 8β were successful in 5-position with phenylboronic acid, 4-vinylphenylboronic acid, and 4-methoxyphenylboronic acid, respectively, under Suzuki cross-coupling conditions (products 11-17). Moreover, a Cu-catalyzed perfluoroalkylation of 8β is reported with 1-iodo-perfluorohexane yielding 3-perfluorohexyl-1-(2,3,4-tri-O-pivaloyl-β-d-xylopyranosyl)-1,2,4-triazole (18). Compound 18 was depivaloylated to the trihydroxy derivative 19. The copper-mediated reaction of 8β with Rupert's reagent gave the bis(3-bromo-1-(2,3,4-tri-O-pivaloyl-β-d-xylopyranosyl)-1,2,4-triazol-5-yl) (20).