Luminescence properties and energy transfer investigations of BaAl2B2O7:Ce3+,Tb3+ phosphors

Ce³⁺ and Tb³⁺ co-doped BaAl₂B₂O₇ phosphors were synthesized by the solid-state method. X-ray diffraction (XRD) was used to characterize the phase structure. The photoluminescent properties of Ce³⁺ and Tb³⁺ co-doped BaAl₂B₂O₇ phosphors were investigated by using the photoluminescence emission and excitation spectra. Under the excitation of near ultraviolet (n-UV) light, BaAl₂B₂O₇:Ce³⁺,Tb³⁺ phosphors exhibited blue emission corresponding to the f–d transition of Ce³⁺ ions and green emission bands corresponding to the f–f transition of Tb³⁺ ions, respectively. Effective energy transfer occurred from Ce³⁺ to Tb³⁺ in BaAl₂B₂O₇ host due to the observed spectra overlap between the emission spectrum of Ce³⁺ ion and the excitation spectrum of Tb³⁺ ion. The energy transfer efficiency from Ce³⁺ ion to Tb³⁺ ion was also calculated to be 71%. Furthermore, the concentration quenching and critical distance of BaAl₂B₂O₇:Ce³⁺,Tb³⁺ phosphors were also discussed. The energy transfer from Ce³⁺ to Tb³⁺ in BaAl₂B₂O₇ host was demonstrated to be resonant type via a dipole–dipole interaction mechanism with the energy transfer critical distance of 16.13 Å.     

White LED based on nano-YAG:Ce3+/YAG:Ce3+,Gd3+ hybrid phosphors

Nano-YAG:Ce³⁺ and YAG:Ce³⁺,Gd³⁺ phosphors were synthesized by glycothermal method. The X-ray diffraction (XRD) measurements showed that the samples can be well-crystallized at 600 °C. The transition electron microscope (TEM) showed that the particles have sizes mostly in the range between 35 and 100 nm. The YAG:Ce nano-phosphor had a wide emission band ranging from blue to yellow peaking at 532 nm, due to the transition from the lowest 5d band to ²F_7/2, ²F_5/2 states of the Ce³⁺ ion. Red-shift of emission peak wavelength from 532 nm to 568 nm has been achieved as doping Gd³⁺ ions into the YAG:Ce³⁺ to substitute some Y³⁺ ions. White LEDs were fabricated by combining GaN (460 nm) chip with the YAG:Ce³⁺ and YAG:Ce³⁺,Gd³⁺. Color rendering index of the white LED as a function of the ratios of theses two kinds of phosphors was studied. As the ratio of YAG:Ce³⁺,Gd³⁺ phosphor increased, the color rendering index of the LED improved significantly under the forward bias of 20 mA. As the ratio of YAG:Ce³⁺ and YAG:Ce³⁺,Gd³⁺ was 11:9, the white LED had a color rendering index, CIE chromaticity coordinates and color temperature T_c of 85, (0.3116, 0.3202) and 6564 K, respectively.     

Luminescence study of cerium-doped La2Hf2O7: Effects due to trivalent and tetravalent cerium and oxygen vacancies

X-ray excited emission spectra, photoluminescence excitation and emission spectra, optical reflectivity spectra, and pulsed X-ray and optical excited luminescence decay measurements are reported for cerium-doped La₂Hf₂O₇ powders prepared by solid state synthesis. A broad luminescence associated with oxygen vacancies is observed in the region 350–750 nm with a peak around 460 nm. The photoluminescence spectra and the number of oxygen vacancies vary for samples annealed in oxidizing or reducing atmospheres and with the temperature of the synthesis process. Increasing the cerium concentration reduces the oxygen-vacancy-related emission due to the presence of Ce⁴⁺. First principles calculations predict that Ce⁴⁺ can substitute in Hf sites; this is confirmed from the optical reflectivity spectrum of cerium-doped La₂Hf₂O₇. Photoluminescence excitation and emission spectra characteristic of Ce⁴⁺ charge transfer transitions and possibly Ce³⁺ are also observed. Although trivalent cerium may be present, no emission observed from cerium-doped La₂Hf₂O₇ can be attributed to Ce³⁺ in La sites.     

Fluorescent properties of a blue-to green-emitting Ce3+, Tb3+ codoped amorphous calcium silicate phosphors

Ce³⁺, Tb³⁺ codoped amorphous calcium silicate phosphor was prepared by heating (830 °C for 30 min) Ce³⁺, Tb³⁺ codoped calcium silicate hydrate phosphor formed by liquid-phase reaction. The excitation peak wavelength of the resulting phosphor was 330 nm and the emission peak wavelengths were at 544 nm, attributed to the ⁵D₄→⁷F₅ transition of Tb³⁺, and at 430–470 mm, attributed to Ce³⁺. The intensity ratio of the two peaks could be freely controlled by varying the Tb/Ca atomic ratio of the Ce³⁺, Tb³⁺ codoped amorphous calcium silicate phosphor, allowing light to be emitted over a wide range from blue to green. It was clarified that energy transfer exists from Ce³⁺ to Tb³⁺.     

Effect of Sr2+-doping on structure and luminescence properties of BaAl2Si2O8:Eu2+ phosphors

Sr²⁺ doped BaAl₂Si₂O₈:Eu²⁺ phosphor was synthesized by chemical co-precipitation method. With the increase of Sr²⁺ concentration, the phase structure of (Ba_0.965 ? xSr_xEu_0.035)Al₂Si₂O₈ changes from hexagonal phase to monoclinic phase owing to large activation energy in SrAl₂Si₂O₈ system. (Ba_0.965 ? xSr_xEu_0.035)Al₂Si₂O₈ phosphor exhibits a broad blue band peaking at 425 nm due to the 4f⁶5d–4f⁷(⁸S_7/2) transition of Eu²⁺ ions. The emission intensity increases, accompanied by the blue shift of emission maximum from 459 to 417 nm with the Sr²⁺ doping concentration increasing. The optimal concentration of Sr²⁺ ion is 40%, and the phosphor shows high color stability in CIE chromaticity diagram. The result indicates that Sr²⁺ doped phosphor not only can enhance the relative intensity but also can adjust the chromaticity coordinate.     

Luminescence and Scintillation Characterization of Cs2NaGdBr6: Ce3+ Single Crystal

Luminescence and scintillation properties of newly discovered bromo-elpasolites Cs₂NaGdBr₆: Ce³⁺ (CNGB: Ce³⁺) are presented. Single crystals of CNGB: Ce³⁺ with dimensions up to Ø7×10 mm³ are successfully grown by the Bridgman technique. X-ray excited luminescence measurements of the grown samples showed a broad emission band in the wavelength range from 365 to 470 nm. It offered an energy resolution of 5.1% (FWHM) at 662 keV for 10% Ce sample. The light output of the investigated samples increases along with cerium concentration. A maximum light yield of ～36,800 ph/MeV is measured for the 10% Ce sample crystal. Under γ-ray excitation, CNGB: Ce³⁺ crystals showed three exponential decay time components. The scintillation mechanism in the sample crystal is presented.     

Infrared broadband emission of bismuth–thulium co-doped lanthanum–aluminum–silica glasses

The Bi–Tm co-doped SiO₂–Al₂O₃–La₂O₃ (SAL) glasses, which exhibited a broadband near-infrared (NIR) emission was investigated by the optical absorption and photoluminescence spectra. The super broadband near-infrared emission from 1000 to 2100 nm, which covered the whole O, E, S, C and L bands, was observed in the Bi–Tm co-doped samples, as a result of the overlap of the Bi-related emission band (centered at 1270 nm) and the emission from Tm^{3+ 3}H₄→³F₄ transition (1440 nm) as well as Tm^{3+ 3}F₄→³H₆ transition (1800 nm). Relative luminescence intensity at 1270, 1440 and 1800 nm wavelength varied depending on the mixing ratio of Bi and Tm and the full-width at half-maximum (FWHM) extending from 1000 to 1600 nm could be 400 nm. These results indicated that Bi–Tm co-doped SiO₂–Al₂O₃–La₂O₃ glasses could provide potential applications in tunable lasers as well as the broadband optical amplifiers in WDM system.     

Infrared-to-visible up-conversion luminescence and energy transfer of RE3+/Yb3+(RE = Ho,Tm) co-doped SrIn2O4

Near-infrared excited up-conversion phosphors of RE³⁺/Yb³⁺(RE = Ho, Tm) co-doped SrIn₂O₄ were synthesized by a solid-state reaction method. X-ray diffraction analysis revealed the phase composition of those samples, and the up-conversion spectroscopic properties were studied in terms of up-conversion emission spectra. Under 980 nm near-infrared laser excitation, strong green emission with the peak at 546 nm was observed in SrIn₂O₄: Ho³⁺/Yb³⁺, which can be assigned to the characteristic ⁵S₂(⁵F₄) → ⁵I₈ transition of Ho³⁺. Furthermore, SrIn₂O₄: Tm³⁺/Yb³⁺ showed bright blue emission with the peak at 486 nm, which is associated with the ¹G₄ → ³H₆ transition of Tm³⁺. The UC power studies indicated that the luminescence of SrIn₂O₄: Ho³⁺/Yb³⁺ and SrIn₂O₄: Tm³⁺/Yb³⁺ are attributed to two-photon and three-photon process, respectively. The possible UC luminescence mechanism and energy transfer in SrIn₂O₄: RE³⁺/Yb³⁺ were discussed.     

Field-assisted sustainable O− ion emission from fluorine-substituted 12CaO·7Al2O3 with improved thermal stability

We examined the electric field-assisted thermionic emission of atomic oxygen radical anion (O^?) in a vacuum from fluorine-substituted derivatives of 12CaO·7Al₂O₃ (C12A7) with a composition of (12 ? x)CaO·7Al₂O₃·xCaF₂ (0 ≤ x ≤ 0.8). Unsubstituted C12A7 easily decomposed into 5CaO?3Al₂O₃ (C5A3) and 3CaO?Al₂O₃ (C3A) above 830 °C during the emission experiment in a vacuum. The decomposition temperature range became narrower as the amount of F^? ion substitution increased, e.g. the sample with x = 0.4 kept a single phase after the emission experiment at 900 °C. The emitted anionic species from the x = 0.4 sample were dominated by O^? ions (～ 92%) together with a small amount of O₂^? ions (～ 4%) and F^? ions (～ 4%). The absence of an O₂ gas supply to the opposite side of the emission surface led to a nearly steady co-emission of O^? ions and electrons with a ratio of < 1/1. The O₂ gas supply markedly enhanced the O^? ion emission, and suppressed the electron emission. A sustainable and high-purity O^? ion emission with a current density of 11 nA cm^? 2 was achieved at 830 °C with the supply of 40 Pa O₂ gas. The similarity in these emission features to the unsubstituted C12A7, together with the improved thermal stability demonstrates that the F^? ion-substituted C12A7 is a promising material for higher intensity O^? ion emission at higher temperatures.     

Near-infrared broadband luminescence and energy transfer in Bi–Tm–Er co-doped lanthanum aluminosilicate glasses

The Bi–Tm–Er co-doped SiO₂–Al₂O₃–La₂O₃ (SAL) glasses, which exhibited a broadband near-infrared (NIR) emission, were investigated by the optical absorption and photoluminescence spectra. A super broadband NIR emission extending from 0.95 to 1.6 μm with a full-width at half-maximum (FWHM) of 430 nm which covered the whole O, E, S, C and L bands, was observed in Bi–Tm–Er co-doped samples under 808 nm excitation, as a result of the overlap of the Bi-related emission band (centered at 1270 nm) and the emission from Tm^{3+ 3}H₄→³F₄ transition (1450 nm) as well as Er^{3+ 4}I_13/2→⁴I_15/2 transition (1545 nm). In addition, a super broadband emission with amplitude relatively flat from 0.95 to 2.1 μm has been observed. The possible energy transfer between Bi-related centers, Tm³⁺ ions and Er³⁺ ions was proposed.     

White-light generation through Ce3+/Mn2+-codoped and Eu2+-doped Ba1.2Ca0.8SiO4 T-phase phosphors

Hexagonal Ba_1.20Ca_0.8?2x?ySiO₄:xCe³⁺,xLi⁺,yMn²⁺ phosphors exhibit two emission bands peaking near 400 and 600 nm from the allowed f–d transition of Ce³⁺ ions and the forbidden ⁴T₁–⁶A₁ transition of Mn²⁺ ions, respectively. The strong interaction between Ce³⁺/Mn²⁺ ions is investigated in terms of energy transfer, crystal field effect, and microstructure by varying their concentrations. They show a higher quenching temperature of 250 °C than that of a commercially used (Ba,Sr)₂SiO₄:Eu²⁺ phosphor (150 °C). Finally, mixtures of these phosphors with green-emissive Ba_1.20Ca_0.70SiO₄:0.10Eu²⁺ are tested and yielded correlated color temperatures from 3500 to 7000 K, and color rendering indices up to 95%.     

Cold and warm white light generation using Zn(PO3)2 glasses activated by Ce3+, Dy3+ and Mn2+

The photoluminescence of zinc metaphosphate glasses activated by Dy³⁺, Ce³⁺/Dy³⁺ and Ce³⁺/Dy³⁺/Mn²⁺ ions was investigated. Non-radiative energy transfers from Ce³⁺ to Dy³⁺ and Ce³⁺ to Mn²⁺ are observed upon 280 nm excitation. The non-radiative nature of these transfers is inferred from the increase in the decay rate of the Ce³⁺ emission when the glass is co-doped with Dy³⁺ or Dy³⁺/Mn²⁺. It is demonstrated that zinc metaphosphate glasses can generate cold or warm white light emission when they are doped with Ce³⁺/Dy³⁺ or Ce³⁺/Dy³⁺/Mn²⁺ and pumped at 280 nm (peak emission wavelength of AlGaN-based LEDs). The CIE1931 chromaticity coordinates and color temperature were (0.34, 0.35) and 5250 K for the cold light, and (0.47, 0.43) and 2700 K for the warm light.     

Intense 974 nm emission from ErxYb2−xSi2O7 films through efficient energy transfer up-conversion from Er3+ to Yb3+ for Si solar cell

The optical properties of the Er_xYb_2?xSi₂O₇ thin films were investigated by photoluminescence measurements and the intense 974 nm light emission was observed. The 974 nm emission was mainly from the transition ²F_5/2 to ²F_7/2 level of Yb³⁺ upon exploring energy-transfer via up-conversion at Er^{3+ 4}I_13/2 level. Under 972 nm excitation, the lifetime at Er^{3+ 4}I_13/2 level reaches up to 4 ms for film containing 2 at% Er³⁺, while decreases to about 20 μs as the film is pumped by 488 nm. This confirmed that the energy transfer up-conversion process was the dominant transition at Er^{3+ 4}I_13/2 level. This may be of interest to improve the solar cells′ efficiency by placing this film at the rear of cell, converting the near-infrared photons between 1480 nm and 1580 nm to just above the Si bandgap.     

Reduction of thin-film ceria on Pt(111) by supported Pd nanoparticles probed with resonant photoemission

Local defects present in CeO_2 ? x films result in a mixture of Ce³⁺ and Ce⁴⁺ oxidation states. Previous studies of the Ce 3d region with XPS have shown that depositing metal nanoparticles on ceria films causes further reduction, with an increase in Ce³⁺ concentration. Here, we compare the use of XPS and resonant photoemission spectroscopy (RESPES) to estimate the concentration of Ce³⁺ and Ce⁴⁺ in CeO_2 ? x films grown on Pt (111), and the variation of this concentration as a function of Pd deposition. Due to the nature of the electronic structure of CeO_2 ? x, resonant peaks are observed for the 4d–4f transitions when the photon energy matches the resonant energy; (hν = 121.0 eV) for Ce³⁺ and (hν = 124.5 eV) for Ce⁴⁺. This results in two discrete resonant photoemission peaks in valence band spectra. The ratio of the difference of these peaks with off-resonance scans gives an indication of the relative contribution of Ce³⁺. Results from RESPES indicate reduction of CeO_2 ? x on deposition of Pd, confirming earlier findings from XPS studies.     

Mechanisms for Ce3+ excitation at energies below the zero-phonon line in YAG crystals and nanocrystals

Excitation of YAG:Ce³⁺ crystals and nanocrystals was performed at λ_exc=473–584 nm over a wide temperature range. It was observed that the luminescence of both nano- and single-crystal YAG:Ce samples is efficiently excited with photon energies well below the Ce³⁺ absorption band and at least 1650 cm^?1 below the ZPL of the 4f¹(²F_5/2)?4f⁰5d¹ transition, located at 489 nm. The studies of Ce³⁺ fluorescence spectra as a function of temperature and excitation wavelength and of their temporal evolution point to the role of phonon-assisted nonradiative energy transfer between different groups of Ce³⁺ centers in the excitation mechanism.     

Synthesis and near-infrared luminescence properties of LaOCl:Nd3+/Yb3+

Near-infrared emitting phosphors LaOCl:Nd³⁺/Yb³⁺ were prepared by the solid-state method, and their structures and luminescent properties were investigated by using X-ray diffraction and photoluminescence analysis, respectively. The studies shows that tetragonal LaOCl:Nd³⁺/Yb³⁺ can be synthesized by the solid-state reaction at 600 °C for 3 h. Upon 353 nm UV excitation, LaOCl:Nd³⁺/Yb³⁺ sample shows strong near-infrared emission lines in the region of 1060–1150 nm (corresponding to ⁴F_3/2 → ⁴I_J′ transition of Nd³⁺, J′ = 9/2, 11/2, 13/2, 15/2) and 980–1050 nm (corresponding to ²F_5/2 → ²F_7/2 transition of Yb³⁺). The decreasing emission intensity of Nd³⁺ with increasing doping concentration of Yb³⁺ proved the energy transfer in LaOCl:Nd³⁺/Yb³⁺. The possible near-infrared emission and energy transfer mechanism between Nd³⁺ and Yb³⁺, as well as the energy transfer efficiency of LaOCl:Nd³⁺/Yb³⁺ were discussed.     

Scintillation properties of Cs2LiGdCl6: Ce3+

In this communication, we investigated the scintillation properties of Cs₂LiGdCl₆:10% Ce³⁺ single crystal. This scintillation crystal is grown by using the vertical Bridgman technique. X-rays induced emission spectra show that, Cs₂LiGdCl₆:10% Ce³⁺ emits into the Ce³⁺ band, spanning from 365 nm to 450 nm wavelengths. Under γ-ray excitation, the sample crystal shows three main decay time components of 129 ns (51%), 573 ns (32%) and 8.9 μs (17%). It offers an energy resolution of 5.0% (FWHM) for the 662 keV full absorption peak at room temperature. We measured an absolute light yield of 20,000 photons/MeV of absorbed γ-ray energy. We found that with a little exposure to the air, the scintillation properties of the Cs₂LiGdCl₆:10% Ce³⁺ crystal deteriorate, which is attributed to the highly hygroscopic nature of this material. We believe that the Cs₂LiGdCl₆:10% Ce³⁺ crystal can be a promising material for medical imaging and radiation detection. Moreover due to the presence of Li and Gd constituents, this scintillation crystal can also be the possible candidate for thermal neutron detection.     

Photoluminescence properties of Ca9Lu(PO4)7:Ce3+, Mn2+ prepared by conventional solid-state reaction

A new red-emitting phosphor Ca₉Lu(PO₄)₇:Ce³⁺, Mn²⁺ has been synthesized by solid-state reaction, and its luminescence properties have been investigated. The broad red emission peaked at 645 nm of Mn²⁺ is greatly enhanced by the sensitizer Ce³⁺ due to efficient energy transfer from Ce³⁺ to Mn²⁺. The energy transfer was demonstrated to belong to a resonant type via a dipole–quadrupole mechanism. The critical distance for Ce³⁺→Mn²⁺ energy transfer was calculated to be 15.04 Å by concentration quenching method. Preliminary results indicate that the phosphor might be a promising red phosphor for UV-based white LEDs.     

Optical characteristics of Tb-doped InBO3 nanocrystals

InBO₃ nanocrystals doped with Tb³⁺ ions are prepared via the sol–gel method. The structure, morphology, and optical properties of the nanocrystals are characterized by X-ray diffraction, high-resolution transmission electron microscopy, field-emission scanning electron microscopy, and photoluminescence analysis. The results show that a hexagonal InBO₃ phase forms at above 650 °C. A second phase of In₂O₃ begins to appear with Tb doping of over 3 mol%. The ⁵D₄→⁷F₅ (553 nm) transitions of Tb³⁺ ions in the InBO₃ host are observed at 2 mol%. The decay time of Tb-doped InBO₃ nanocrystals is about 2.1 ms. For Tb-doped InBO₃ nanocrystals excited at 237 nm and 553 nm wavelengths, the 2 mol% doping level yields the highest saturation of green emission. The emission shifts from green to yellow when the doping concentration is increased from 1 to6 mol%, due to the ⁵D₄→⁷F₅ transition.     

Spectroscopic characteristics of Tm3+ in Tm and Tm,Nd, Yb:Sc2O3 ceramic

The spectroscopic investigation of Tm³⁺ or (Nd, Yb, Tm)-doped Sc₂O₃ transparent ceramics, as laser-active media for visible and IR emission, was performed. The spectra are dominated by Tm³⁺ ions in sites of C₂ symmetry and an energy level scheme and other spectral parameters were determined. The strong concentration quenching of ³H₄ level emission in Tm:Sc₂O₃ at 300 K is discussed by considering the resonant cross-relaxation (³H₄→³F₄)?(³H₆→³F₄) process and multipolar interactions of various orders. The main energy-transfer processes leading to the blue upconversion emission from the ¹G₄ Tm³⁺ level in (Tm, Nd, Yb):Sc₂O₃ ceramic, under pulsed pumping at 808.3 nm were evidenced.