White-light generation through Ce3+/Mn2+-codoped and Eu2+-doped Ba1.2Ca0.8SiO4 T-phase phosphors

Hexagonal Ba_1.20Ca_0.8?2x?ySiO₄:xCe³⁺,xLi⁺,yMn²⁺ phosphors exhibit two emission bands peaking near 400 and 600 nm from the allowed f–d transition of Ce³⁺ ions and the forbidden ⁴T₁–⁶A₁ transition of Mn²⁺ ions, respectively. The strong interaction between Ce³⁺/Mn²⁺ ions is investigated in terms of energy transfer, crystal field effect, and microstructure by varying their concentrations. They show a higher quenching temperature of 250 °C than that of a commercially used (Ba,Sr)₂SiO₄:Eu²⁺ phosphor (150 °C). Finally, mixtures of these phosphors with green-emissive Ba_1.20Ca_0.70SiO₄:0.10Eu²⁺ are tested and yielded correlated color temperatures from 3500 to 7000 K, and color rendering indices up to 95%.     

White light emitting from single phased K2Ca1−x−yP2O7: xEu, yMn phosphors under UV excitation

A single phased white light emitting phosphors K₂Ca_1−x−yP₂O₇: xEu²⁺, yMn²⁺ were synthesized by solid state reaction method. The Effective energy transfer occurs in this phosphor due to the large spectral overlap between the emission of Eu²⁺ and the excitation of Mn²⁺. The emission hue of K₂Ca_1−x−yP₂O₇: xEu²⁺, yMn²⁺ from blue to white light can be obtained by tuning the Eu²⁺/Mn²⁺ content ratio. The energy transfer mechanism from Eu²⁺ to Mn²⁺ in this phosphor was carefully investigated and demonstrated to be via the dipole–quadrupole interaction.     

Photoluminescence properties of color-tunable SrMgAl10O17:Eu2+,Mn2+ phosphors for UV LEDs

Aluminate phosphors SrMgAl₁₀O₁₇ codoped with Eu²⁺ and Mn²⁺ ions were prepared by solid-state reaction. The phase structure and photoluminescence properties of the as-prepared phosphors were characterized by powder X-ray diffraction, photoluminescence excitation and emission spectra. Upon excitation of UV light, two broad emission bands centered at 470 and 515 nm were observed, and they were assigned to Eu²⁺ and Mn²⁺ emissions, respectively. The emission color of the phosphors can be tuned from blue to cyan and finally to green by adjusting the concentration ratios of Eu²⁺ and Mn²⁺. Effective energy transfer occurs from Eu²⁺ to Mn²⁺ in the host due to the spectral overlap between the emission band of Eu²⁺ and the excitation bands of Mn²⁺. The energy transfer mechanism was demonstrated to be electric dipole–quadrupole interaction. The energy transfer efficiency and critical distance were also calculated. The phosphors exhibit strong absorption in near UV spectral region and therefore they are potentially useful as UV-convertible phosphors for white LEDs.     

Phase dependent photoluminescence and energy transfer in Ca2P2O7: Eu2+, Mn2+ phosphors for white LEDs

α- and β-Ca₂P₂O₇: Eu²⁺, Mn²⁺ phosphors were prepared by solid-state reaction. Phase transition from tetragonal (β-phase) to monoclinic (α-phase) is performed. A strong orange emission of Mn²⁺ is observed in both α-and β-Ca₂P₂O₇: Eu²⁺, Mn²⁺ upon near ultraviolet (UV) excitation through energy transfer from Eu²⁺ to Mn²⁺. The transfer efficiencies for various Mn²⁺ concentrations are estimated based on lifetime measurements of the fluorescence of Eu²⁺ in the two phases. The photoluminescence excitation spectra of α-Ca₂P₂O₇: Eu²⁺, Mn²⁺ can cover 400 nm of the near-UV range, denoting its potential use as a phosphor with intense orange component for white light emitting diodes (LEDs).     

Effect of Na+ co-dopant and activator concentration on luminescent properties of CaGa4O7:Eu3+

Two series of calcium gallate phosphors: Ca_1?xEu_xGa₄O₇ and Ca_1?2xEu_xNa_xGa₄O₇ (x=0, 0.002, 0.01, 0.02, 0.03, 0.05) were synthesized by a modified Pechini method and their optical properties at 298 and 77 K were investigated. In undoped CaGa₄O₇ upon 255 nm excitation a bluish white emission (λ_max=500 nm) followed by an afterglow of the same color lasting for 10–20 s was observed. Eu³⁺-doping quenched the host-related luminescence and the characteristic red emission of the dopant with maximum at 613 nm appeared. Its excitation spectrum consisted of a broad band assigned to ligand to metal, O^2?→Eu³⁺, charge transfer absorption and narrow lines arising from intraconfigurational transitions within the 4f⁶ states of Eu³⁺ ion. The effects of Eu³⁺ concentration and Na⁺ co-doping on the luminescence properties and decay kinetics were studied. Low temperature emission spectra showed that Eu³⁺ ions are positioned in environments of different symmetries. Their relative populations changed with the activator content. Co-doping with Na⁺ ions led to a remarkable reduction of the number of Eu³⁺ sites as well as to noticeable improvement of the luminescence brightness though it did not affect the decay time of the emission. The quantum efficiencies of singly doped CaGa₄O₇:Eu³⁺ were very low (in the range of 1–3.7%). Na⁺ co-doping improved this parameter leading to the highest efficiency of 11% for CaGa₄O₇:3%Eu³⁺,3%Na⁺.     

Emission-tunable phosphors Ca9MgM′ (PO4)7: Eu2+,Mn2+ (M′=Li,Na, K) for white light-emitting diodes

A series of single-composition phosphors Ca₉MgM′(PO₄)₇:xEu²⁺, yMn²⁺ (CMM′ P:Eu²⁺, Mn²⁺; M′=Li, Na, K; 0.003≤x≤0.03; 0 ≤y≤0.1) were synthesized by solid state reactions. Upon excitation at 337 nm, phosphors Ca₉MgM′ (PO₄)₇: Eu²⁺ exhibit strong blue emissions centered at 417 (Ca₉MgLi(PO₄)₇:Eu²⁺), 457 (Ca₉MgNa(PO₄)₇:Eu²⁺), and 453 (Ca₉MgK(PO₄)₇:Eu²⁺) nm respectively, which correspond to the 4f⁶5d¹→4f⁷ transitions of Eu²⁺ ions, Through an effective resonance-type energy transfer, CMM′P:Eu²⁺,Mn²⁺ phosphors exhibit a series of colors by adjusting the concentration of Mn²⁺. The result indicates that CMM′P:Eu²⁺,Mn²⁺ can be potentially used as a UV excited phosphor for white light-emitting diodes (LEDs).     

Photoluminescence properties of Eu2+–Mn2+ codoped Ca-α-SiAlON phosphors

Eu²⁺–Mn²⁺ codoped Ca-α-SiAlON phosphors, Ca_0.736?ySi_9.6Al_2.4O_0.8N_15.2:0.064 Eu²⁺, yMn²⁺, were firstly synthesized by the high temperature solid state reaction method. The effects of doped Eu²⁺ and Eu²⁺–Mn²⁺ concentrations on the photoluminescence properties of the as-prepared phosphors were investigated systematically. Powder X-ray diffraction shows that pure Ca-α-SiAlON phase is synthesized after sintering at 1700 °C for 2 h under 0.5 MPa N₂ atmosphere. The excitation spectra of Eu²⁺-doped Ca-α-SiAlON phosphors are characterized by two dominant bands centered at 286 nm and 395 nm, respectively. The photoluminescent spectrum of Eu²⁺-doped Ca-α-SiAlON phosphor exhibits an intense emission band centered at 580 nm due to the allowed 4f ⁶5d→4f ⁷ transition of Eu²⁺, showing that the phosphor is a good candidate for creating white light when coupled to a blue LED chip. The intensities of both excitation and emission spectra monotonously decrease with the increment of codoped Mn²⁺ content (i.e. y value), indicating that energy transfer between Eu²⁺ and Mn²⁺ is inefficient in the case of Eu²⁺–Mn²⁺ codoped Ca-α-SiAlON phosphors.     

Eu3+ emission in SrAl2B2O7 based phosphors

Eu³⁺ doped SrAl₂B₂O₇ phosphors were fabricated by the wet method. The structures of the phosphors were characterized by XRD. The doping content of Eu³⁺ ions in SrAl₂B₂O₇:Eu³⁺ phosphors are 1%, 4%, 6%, 8%, 10% (molar fraction), respectively. Luminescence properties were analyzed by measuring the excitation and photoluminescence spectra. The luminescent properties of SrAl₂B₂O₇:Eu³⁺ phosphors are discussed. It is shown that from 4% to 6% of doping content of Eu³⁺ ions under 392 nm excitation in SrAl₂B₂O₇:Eu³⁺ phosphors is optimum.     

Synthesis and photoluminescence properties of the high-brightness Eu3+-doped Sr3Bi(PO4)3 phosphors

A series of orange reddish emitting phosphors Eu³⁺-doped Sr₃Bi(PO₄)₃ have been successfully synthesized by conventional solid-state reaction, and its photoluminescence (PL) properties have been investigated. The excitation spectra reveal strong excitation bands at 392 nm, which match well with the popular emissions from near-UV light-emitting diode chips. The emission spectra of Sr₃Bi(PO₄)₃:Eu³⁺ phosphors invariably exhibit five peaks assigned to the ⁵D₀→⁷F_J (J=0, 1, 2, 3, 4) transitions of Eu³⁺ and have dominating emission peak at 612 nm under 392 nm excitation. The luminescence intensity was enhanced with increasing Eu³⁺ content and the emission reached the maximum intensity at x=0.05 in Sr₃Bi(PO₄)₃:xEu³⁺. The energy transfer behavior in the phosphors was discussed. The Commission Internationale de lEclairage (CIE) chromaticity coordinates, the quantum efficiencies, and the decay curves of the entitled phosphors excited under 392 nm are also investigated. The experimental results indicate that the Eu³⁺-doped Sr₃Bi(PO₄)₃ phosphors are promising orange reddish-emitting phosphors pumped by near-UV light.     

Synthesis and luminescence properties of a broad-band red phosphor Ca3Si2O7:Eu2+ for warm white light-emitting diodes

Single-phase broad-band red-emitting Ca₃Si₂O₇:Eu²⁺ phosphors, with photoluminescence features that qualify them as candidates for white light-emitting diodes applications, were successfully synthesized via a modified solid-state reaction method that employed H₃BO₃ as a flux. The phosphors produced have an intense broad red emission band, with a peak at 603 nm, a full width at half maximum of 110 nm, and color coordinates of (0.550, 0.438). Concentration quenching occurred at 0.01 mol Eu²⁺. The discussion of the results shows that Eu²⁺ ions should be accommodated at the Ca-sites of the lattice, dipole–dipole interactions should predominantly govern the energy transfer mechanism among them, and the critical distance between them is ～31 Å.     

Enhanced photoluminescence intensity of Y2O3: Eu3+ Sheets by codoping Pr3+ and involved energy transfer mechanisms

Y₂O₃: Eu³⁺ has been widely applied as red phosphors in the fields of displaying and illumination. Here, we report the enhanced luminescence intensity of Y₂O₃: Eu³⁺ by codoping Pr³⁺ ion. The Pr³⁺ and Eu³⁺ doped Y₂O₃ microsheets with high aspect ratio were synthesized by a simple route combining chemical precipitation and pyrolysis, which could emit intense red light centered at 610 nm under the 254 and 365 nm UV excitation. The fluorescence measurement indicated that the luminescence intensity of Y₂O₃: Eu³⁺, Pr³⁺ did not increase monotonously with increasing Pr³⁺ concentration. The highest improvement of the photoluminescence intensity of Y₂O₃:Eu³⁺ was realized in the sample doped with 2 mol% Pr³⁺, which was of 17.8% higher than the whole intensity of only Eu³⁺ doped Y₂O₃.The mechanism analysis based on SEM, XRD, fluorescence spectra, and simplified energy level diagram indicated that (1) energy transfer process between Pr³⁺ and Eu³⁺, (2) crystallinity, and (3) symmetry should respond for this nonmonotonous variation phenomenon by competition with each other. For energy transfer process between Pr³⁺ and Eu³⁺, it was suggested that the cross relaxation of ⁵D₀ + ⁷F₁(Eu³⁺)?³P₀ + ³H₆(Pr³⁺) and the efficient energy transfer from ³P₀ state of Pr³⁺ to ⁵D₁ energy level of Eu³⁺ lead to the improvement of the population of the ⁵D₀ state of Eu³⁺ so that the 610 red emission of Eu³⁺ ion was accordingly enhanced.     

Luminescence spectroscopy and energy transfer in Eu2+/Mn2+-doped KCaPO4 phosphors

Eu²⁺/Mn²⁺-doped KCaPO₄ phosphors were prepared by conventional solid-state reaction. X-ray powder diffraction (XRD), SEM, photoluminescence excitation, and emission spectra, and the luminescence decay curves were measured. Mn²⁺ singly doped KCaPO₄ shows the weak origin-red luminescence band peaked at about 590 nm. The Eu²⁺/Mn²⁺ co-doped phosphors emit two distinctive luminescence bands: a blue one centered at 480 nm originating from Eu²⁺ ions and a broad red-emitting one peaked at 590 nm from Mn²⁺ ions. The luminescence intensity from Mn²⁺ ions can be greatly enhanced with the co-doping of Eu²⁺ ions. The efficient energy transfer from Eu²⁺ to Mn²⁺ was verified by the photoluminescence spectra together with the luminescence decay curves. The resonance-type energy transfer via a dipole–quadrupole interaction mechanism was supported by the decay lifetimes. The emission colors could be tuned by changing the Mn²⁺-doping concentration.     

A reddish orange-emitting stoichiometric phosphor K3Eu(PO4)2 for white light-emitting diodes

A series of Eu³⁺ activated K₃Y_1?xEu_x(PO₄)₂ phosphors were synthesized by the solid-state reaction method. The structures and photoluminescent properties of these phosphors were investigated at room temperature. The results of XRD patterns indicate that these phosphors are isotypic to the monoclinic K₃Y(PO₄)₂ or K₃Eu(PO₄)₂. The excitation spectra indicate that these phosphors can be effectively excited by near UV (370–410 nm) light. The orange emission from transition ⁵D₀–⁷F₁ is dominant, and the peak value ratio of ⁵D₀–⁷F₁/⁵D₀–⁷F₂ is 1.44. The emission spectra exhibit strong reddish orange performance (CIE chromaticity coordinates: x=0.63, y=0.36), which is due to the ⁵D₀–⁷F_J transitions of Eu³⁺ ions. The relationship between the structure and the photoluminescent properties of the phosphors was studied. The absence of concentration quenching of Eu³⁺ was observed in K₃Y_1?xEu_x(PO₄)₂. K₃Eu(PO₄)₂ has potential application as a phosphor for white light-emitting diodes.     

Luminescence and energy transfer in Eu2+,Mn2+ codoped Na2BaMgP2O8 phosphor

Eu²⁺ single-doped and Eu²⁺/Mn²⁺-codoped Na₂BaMgP₂O₈ phosphors were prepared by a combustion-assisted synthesis method. The phase formation was confirmed by X-ray powder diffraction measurement. Na₂BaMgP₂O₈:Eu²⁺,Mn²⁺ shows a broad blue emission band and a red emission band, which originate from Eu²⁺ occupying the Ba²⁺ sites and Mn²⁺ occupying the Mg²⁺ sites, respectively. The efficient energy transfer from Eu²⁺ to Mn²⁺ is verified by the excitation and emission spectra together with the luminescence decay curves. Based on the principle of energy transfer, the relative intensities of blue and red emissions could be tuned by adjusting the contents of Eu²⁺ and Mn²⁺.     

Photoluminescence properties of Ca9Lu(PO4)7:Ce3+, Mn2+ prepared by conventional solid-state reaction

A new red-emitting phosphor Ca₉Lu(PO₄)₇:Ce³⁺, Mn²⁺ has been synthesized by solid-state reaction, and its luminescence properties have been investigated. The broad red emission peaked at 645 nm of Mn²⁺ is greatly enhanced by the sensitizer Ce³⁺ due to efficient energy transfer from Ce³⁺ to Mn²⁺. The energy transfer was demonstrated to belong to a resonant type via a dipole–quadrupole mechanism. The critical distance for Ce³⁺→Mn²⁺ energy transfer was calculated to be 15.04 Å by concentration quenching method. Preliminary results indicate that the phosphor might be a promising red phosphor for UV-based white LEDs.     

Luminescent properties of Eu2+and Dy3+ ions in Ba4Al2O7 phosphor for solid state lighting

In this paper we report the combustion synthesis of rare earth (RE=Eu, Dy) doped Ba₄Al₂O₇ phosphors. Prepared phosphors were characterized by X-ray powder diffraction (XRD), scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), CIE color co-ordinates and their photoluminescence (PL) properties were also investigated. In case of Ba₄Al₂O₇: Eu²⁺, the emission spectra show unique band centered at 495 nm, which corresponds to the 4f⁶5d¹→4f⁷ transition of Eu²⁺, and PL emission spectra of Dy³⁺ ion under 348 nm excitation give two bands centered at 478 nm (blue) and 575 nm (yellow), which originate from the transitions of ⁴F_9/2→⁶H_15/2 and ⁴F_9/2→⁶H_13/2 of Dy³⁺, respectively. The results indicate that the Eu²⁺ and Dy³⁺ activated Ba₄Al₂O₇ phosphor could find application in solid state lighting.     

Synthesis and luminescence properties of green phosphors Ca6Sr4(Si2O7)3Cl2:Eu2+ for white light emitting diodes

Divalent europium-activated chlorosilicate Ca₆Sr₄(Si₂O₇)₃Cl₂:Eu²⁺ phosphors were synthesized by a conventional solid-state reaction under reductive atmosphere. These phosphors can be efficiently excited by UV–visible light from 320 to 420 nm, which matches that of a near UV-emitting InGaN chip. Under the 360 nm excitation, Ca₆Sr_3.97(Si₂O₇)₃Cl₂:0.03Eu²⁺ phosphor shows a strong and broad emission centering at 515 nm, which is attributed to the 5d→4f transition of Eu²⁺ ion. The mechanism of concentration quenching was determined to be the dipole–dipole interaction and the critical energy-transfer distance of Eu²⁺ was calculated as 3.31 nm. The CIE chromaticity coordinates of Ca₆Sr_3.96(Si₂O₇)₃Cl₂:0.03Eu²⁺ phosphor are (0.127, 0.770) according to the emission spectrum. It can be expected that Ca₆Sr₄(Si₂O₇)₃Cl₂:Eu²⁺ phosphor is a promising candidate as the green component for near-ultraviolet InGaN-based white LED.     

Synthesis and color-tunable luminescence properties of novel calcium aluminate silicate chloride phosphors

Eu²⁺ and Mn²⁺ co-doped calcium aluminate silicate chloride phosphors with the chemical composition of Ca₃Al₂Si₂O₈Cl₄:Eu²⁺, Mn²⁺ have been prepared by a solid-state method, and their luminescence properties have been investigated by tuning the En²⁺/Mn²⁺ ions concentration. The phase formation and microstructure of Ca₃Al₂Si₂O₈Cl₄:Eu²⁺, Mn²⁺ phosphors have been illuminated by XRD and SEM analysis. Photoluminescence (PL) spectrum reveals that Ca₃Al₂Si₂O₈Cl₄:Eu²⁺ exhibits a strong blue emission band centered at 431 nm, while Ca₃Al₂Si₂O₈Cl₄:Eu²⁺, Mn²⁺ can emit bluish-white light by adjusting the Mn²⁺ content appropriately. The energy transfer mechanism involving Eu²⁺–Mn²⁺ have also been investigated.     

Synthesis and photoluminescence properties of YVO4:Eu3+, Al3+ phosphor

The Y_0.95?xAl_xVO₄:5%Eu³⁺ (0≤x≤0.1) phosphors were successfully synthesized by solid state reaction at 900 °C for 6 h, and their luminescence properties were investigated under UV and VUV excitation. Monitoring at 619 nm, a strong broad absorption was enhanced by co-doping of Al³⁺ into the YVO₄:Eu³⁺ lattices at 256 nm under UV excitation. The VUV excitation spectra also showed the enhanced excitation bands at about 156 and 200 nm. Under 254 or 147 nm excitation, it was found that Y_0.95?xAl_xVO₄:Eu³⁺(0≤x≤0.1) phosphors showed strong red emission at about 619 nm corresponding to the electric dipole ⁵D₀^–7F₂ transition of Eu³⁺. The improvement of luminescence intensity of YVO₄:Eu³⁺ was also observed after partial substituting Y³⁺ by Al³⁺ and the optimal luminescence intensity appeared with incorporation of 2.5 mol% Al³⁺.     

Effect of Eu3+ concentration on microstructure and photoluminescence of Sr2SiO4:Eu3+ phosphors prepared by microwave assisted sintering

In this paper, effect of Eu³⁺ doping concentrations on microstructure and photoluminescence of Sr₂SiO₄ phosphors was investigated. The Sr_2?xSiO₄:xEu³⁺ phosphors with x=0.05, 0.1, 0.2, 0.3 were synthesized by microwave assisted sintering at 1200 °C for 60 min in air. X-ray powder diffraction analysis confirmed the formation of pure Sr₂SiO₄ phase without second phase or phases of starting materials irrespective of the adding amount of Eu³⁺. From scanning electron microscopy image, it is found that with more Eu³⁺ ions introduced to Sr₂SiO₄, the shape of the particles is not much different from each other, but the particle size decreases significantly from 1 to 2 μm (when x=0.05) to less than 500 nm (when x=0.3). The emission spectrum was located obviously at 617 nm as the excitation spectrum at λ_ex=395 nm, and it had best emission intensity when x=0.1.