Synthesis and photoluminescence properties of the high-brightness Eu3+-doped Sr3Bi(PO4)3 phosphors

A series of orange reddish emitting phosphors Eu³⁺-doped Sr₃Bi(PO₄)₃ have been successfully synthesized by conventional solid-state reaction, and its photoluminescence (PL) properties have been investigated. The excitation spectra reveal strong excitation bands at 392 nm, which match well with the popular emissions from near-UV light-emitting diode chips. The emission spectra of Sr₃Bi(PO₄)₃:Eu³⁺ phosphors invariably exhibit five peaks assigned to the ⁵D₀→⁷F_J (J=0, 1, 2, 3, 4) transitions of Eu³⁺ and have dominating emission peak at 612 nm under 392 nm excitation. The luminescence intensity was enhanced with increasing Eu³⁺ content and the emission reached the maximum intensity at x=0.05 in Sr₃Bi(PO₄)₃:xEu³⁺. The energy transfer behavior in the phosphors was discussed. The Commission Internationale de lEclairage (CIE) chromaticity coordinates, the quantum efficiencies, and the decay curves of the entitled phosphors excited under 392 nm are also investigated. The experimental results indicate that the Eu³⁺-doped Sr₃Bi(PO₄)₃ phosphors are promising orange reddish-emitting phosphors pumped by near-UV light.     

Preparation and photoluminescence properties of the Sr1.56Ba0.4SiO4:0.04Eu2+ phosphor

The Sr_1.56Ba_0.4SiO₄:0.04Eu²⁺ phosphors were prepared via a combustion reaction and following the calcination method at low temperature. The influences of the amount of the uncommonly used SrCl₂ flux, different calcination temperatures and time on the structure and the photoluminescence (PL) properties of the phosphors were investigated. Under the excitation of 450 nm blue light, the phosphor shows the intense broad emission band from 490 nm to 650 nm, and the emission peak is centered at 553 nm. The luminescence intensity of Sr_1.56Ba_0.4SiO₄:0.04Eu²⁺ was very sensitive to the crystallinity and morphology characteristics of the phosphor. The phosphor calcined at 950 °C for 3 h in 20%H₂/80%Ar atmosphere exhibits improved PL properties due to its high crystallinity and excellent morphology characteristics. The use of the SrCl₂ flux provides a novel way to improve the crystallinity of the silicates phosphors at low preparation temperature.     

Photoluminescence properties of Eu2+–Mn2+ codoped Ca-α-SiAlON phosphors

Eu²⁺–Mn²⁺ codoped Ca-α-SiAlON phosphors, Ca_0.736?ySi_9.6Al_2.4O_0.8N_15.2:0.064 Eu²⁺, yMn²⁺, were firstly synthesized by the high temperature solid state reaction method. The effects of doped Eu²⁺ and Eu²⁺–Mn²⁺ concentrations on the photoluminescence properties of the as-prepared phosphors were investigated systematically. Powder X-ray diffraction shows that pure Ca-α-SiAlON phase is synthesized after sintering at 1700 °C for 2 h under 0.5 MPa N₂ atmosphere. The excitation spectra of Eu²⁺-doped Ca-α-SiAlON phosphors are characterized by two dominant bands centered at 286 nm and 395 nm, respectively. The photoluminescent spectrum of Eu²⁺-doped Ca-α-SiAlON phosphor exhibits an intense emission band centered at 580 nm due to the allowed 4f ⁶5d→4f ⁷ transition of Eu²⁺, showing that the phosphor is a good candidate for creating white light when coupled to a blue LED chip. The intensities of both excitation and emission spectra monotonously decrease with the increment of codoped Mn²⁺ content (i.e. y value), indicating that energy transfer between Eu²⁺ and Mn²⁺ is inefficient in the case of Eu²⁺–Mn²⁺ codoped Ca-α-SiAlON phosphors.     

Luminescence enhancement by the reduction–oxidation synthesis in monoclinic RE2O3 (RE=Eu,Gd) phosphors containing Eu3+ activator

A novel synthesis was developed for enhanced luminescence in sesquioxide phosphors containing Eu³⁺ activator. It consisted of two annealing steps: reduction under vacuum with gaseous H₂ at 10 Torr and 1300 °C and re-oxidation at 300–1500 °C in air. The integrated luminescence intensity of the monoclinic Eu₂O₃ phosphor was enhanced ca. 21 times by this method compared with conventional processing. The photoluminescence (PL) intensity was maximized at re-oxidation temperatures of 500–1100 °C. The PL characteristics of monoclinic Eu₂O₃ and Gd₂O₃:0.06Eu samples were compared with a commercial cubic Y₂O₃:Eu phosphor. The evolution of physical characteristics during the two-step annealing was studied by Raman spectroscopy, XPS, XRD, PL decay analysis, and SEM. PL decay lifetime increased proportionally to the PL intensity over the range 0.5–100 μs. Additional vibrational modes appeared at 490, 497, and 512 cm^?1 after the two-step annealing. The increase in PL intensity was ascribed to the formation of excess oxygen vacancies and their redistribution during annealing. Resonance crossovers between the charge transfer state and the emitting ⁵D_J states are discussed in relation to reported luminescence saturation mechanisms for oxysulfides Ln₂O₂S:Eu³⁺ (Ln=Y, La).     

UV-induced photoluminescence and thermally stimulated luminescence of CaSO4:Eu and CaF2:Tb3+ phosphors

Ultraviolet radiation induced changes in photoluminescence (PL) and thermally stimulated luminescence (TSL) of europium activated calcium sulphate (CaSO₄:Eu³⁺, Eu²⁺) and terbium doped calcium fluoride (CaF₂:Tb³⁺) phosphors have been studied. PL measurements suggest conversion of Eu³⁺ to Eu²⁺ on 254 nm irradiation corresponding to charge transfer band of Eu³⁺ ions and reduction of Eu²⁺ ions with 365 nm illumination representing a f–d transition of Eu²⁺ ions. Similar studies carried out on CaF₂:Tb³⁺ phosphor, however, do not show any significant wavelength specific changes. The integrated TSL output appears to be rate-dependent for both phosphors. The wavelength dependent changes in TSL output observed for CaSO₄:Eu phosphor have been correlated with those obtained in PL studies. The changes in TSL and PL characteristics of CaF₂:Tb³⁺ phosphor have been explained on the basis of stabilisation of traps based on matrix specific charge similarities.     

Luminescence and evaluation of trapping parameters in NaMgSO4Cl: X (X=Cu or Ce) phosphor

Thermoluminescence (TL) characteristics of recently developed high sensitive mixed halosulphate phosphors, NaMgSO₄Cl: Cu and NaMgSO₄Cl: Ce were studied in comparison with CaSO₄: Dy in order to assess the possibility of their use in personal monitoring and TLD phosphors at very low dose of 5 Gy. It was found that NaMgSO₄Cl: Cu is 5.59 times and NaMgSO₄Cl: Ce is 6.18 times more sensitive as compared to standard CaSO₄: Dy. UV photo-excited luminescence from Cu to Ce doped NaMgSO₄Cl halosulphate phosphors has been investigated. The intense emission of the spectrum is assigned to electronic transitions 3d⁹4s¹→3d¹⁰ in monovalent copper ion and 5d→4f in Ce³⁺ ions. Increase in PL peak intensity suggesting that Cu and Ce play an important role in PL emission in the present matrix. These phosphors were synthesized by the wet chemical method. XRD, photoluminescence (PL) and thermoluminescence (TL) characterization of phosphors has been reported in this paper. The preparation of an inexpensive and high sensitive NaMgSO₄Cl: Cu and NaMgSO₄Cl: Ce with TL glow peaks for different concentrations are observed between 160 and 195 °C and between 200 and 225 °C, respectively, exposed to gamma-rays of ⁶⁰Co for their thermoluminescence (TL) properties. The glow curves have been recorded at a heating rate of 2 K s^?1 and irradiated at a dose rate of 0.995 kGy h^?1 for 5 Gy. In present study the trapping parameters such as order of kinetics (b), activation energy (E) and frequency factors (s) have been calculated for the 195 and 200 °C glow peaks of NaMgSO₄Cl: Cu and NaMgSO₄Cl: Ce, respectively by using Chen's method. The paper discusses the luminescence of Cu⁺ and Ce³⁺ by simple method of incorporation in NaMgSO₄Cl host.     

Development of zeolite-derived novel aluminosilicate phosphors

In this research, zeolite-derived aluminosilicate phosphors were synthesized through the ion exchange route. Red light-emitting property of Eu³⁺-doped aluminosilicate phosphors were discussed from a view point of the Eu content, heat-treatment condition and the oxidation state of Eu ions. The crystalline phase of the host aluminosilicates could be successfully controlled as designed based on the published NaAlO₂–SiO₂ binary phase diagram. Orange-red emission peaks derived from the ⁵D₀→⁷F_j (j=0, 1, 2, 3, 4) transition of Eu³⁺ were observed around 590–700 nm, and 4f⁶5d→4f⁷ transition of Eu²⁺ was observed at around 400–500 nm. The relative intensity I(⁵D₀→⁷F₂) of the dominant emission peak at 612 nm increased consistently with the Eu content. The results of the XANES spectroscopy analysis revealed that Eu²⁺ ion in the 1400 °C as heat-treated host aluminosilicate were successfully converted to Eu³⁺ by the additional annealing at 1100 °C. The Eu contents and heat-treatment conditions were determined to exhibit the best performance as a red phosphor, which were 10 wt% and 1500 °C, respectively     

Luminescent properties of red-emitting LiSr4B3O(9−3x/2)Nx:Eu2+ phosphor for white-LEDs

An Eu²⁺-activated oxynitride LiSr_(4?y)B₃O_(9?3x/2)N_x:yEu²⁺ red-emitting phosphor was synthesized by solid-state reactions. The synthesized phosphor crystallized in a cubic system with space group Ia–3d. The LiSr₄B₃O_(9?3x/2)N_x:Eu²⁺ phosphors exhibited a broad red emission band with a peak at 610 nm and a full width at half maximum of 106 nm under 410 nm excitation, which is ascribed to the 4f⁶5d¹→4f⁷ transition of Eu²⁺. The optimal doped nitrogen concentration was observed to be x=0.75. The average decay times of two different emission centers were estimated to be 568 and 489 ns in the LiSr_3.99B₃O_8.25N_0.5:0.01Eu²⁺ phosphors, respectively. Concentration quenching of Eu²⁺ ions occurred at y=0.07, and the critical distance was determined as 17.86 Å. The non-radiative transitions via dipole–dipole interactions resulted in the concentration quenching of Eu²⁺-site emission centers in the LiSr₄B₃O₉ host. These results indicate LiSr₄B₃O_(9?3x/2)N_x:Eu²⁺ phosphor is promising for application in white near-UV LEDs.     

Synthesis and photoluminescent behavior of Eu3+-doped alkaline-earth tungstates

Eu³⁺-doped alkaline-earth tungstates MWO₄ (M=Ca²⁺, Sr²⁺, Ba²⁺) were prepared by a polymeric precursor method based on the Pechini process. The polymeric precursors were calcined at 700 °C for 2 h in order to obtain well-crystallized powders and then characterized by X-ray diffraction (XRD), thermogravimetric analysis (TG), scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy and photoluminescence spectroscopy (PL). All prepared samples showed a pure crystalline phase with scheelite-type structure confirmed by XRD. It was noted that the charge-transfer band shifted from 260 to 283 nm when calcium is replaced by strontium. However, this band was not observed for Eu³⁺-doped barium tungstate. Upon excitation at 260 nm, the emission spectra are dominated by the red ⁵D₀→⁷F₂ transition at 618 nm. By analyzing of the emission lines, it was inferred that Eu³⁺ ions occupy low symmetry sites in the host lattice. It was also found that Eu³⁺-doped SrWO₄ displays better chromaticity coordinates and greater luminescence intensity than the other samples.     

Preparation and TSL studies in Tb activated LiMgPO4 phosphor

LiMgPO₄:Tb³⁺ phosphor was synthesized by solid state reaction. The thermally stimulated luminescence (TSL) glow curve of Tb doped LiMgPO₄ exhibits a main TSL peak at 170 °C with shoulders at 100 and 260 °C on either side of this peak. The TSL sensitivity of the phosphor was found to be about 2.5 times that of CaSO₄:Dy phosphor. TSL emission and photoluminescence (PL) studies show that Tb³⁺ ion acts as luminescence centre in this phosphor. The kinetic parameters, namely activation energy (E) and frequency factor (s) associated with the main glow peak have been determined using peak shape method. The activation energy and frequency factor obtained are 1.35 ± 0.03 eV and (6.53 ± 0.43) × 10¹⁴ s^?1 respectively. The paper discusses the dosimetric characteristics like dose response, fading, energy response and minimum detectable dose and results thereof.     

Novel EGCG assisted ultrasound synthesis of self-assembled Ca2SiO4:Eu3+ hierarchical superstructures: Photometric characteristics and LED applications

This paper reports for the first time ultrasound, EGCG assisted synthesis of pure and Eu³⁺ (1–5 mol%) activated Ca₂SiO₄ nanophosphors having self-assembled superstructures with high purity. The shape, size and morphology of the product were tuned by controlling influential parameters. It was found that morphology was highly dependent on EGCG concentration, sonication time, pH and sonication power. The probable formation mechanism for various hierarchical superstructures was proposed. The PL studies of Ca₂SiO₄:Eu³⁺ phosphors can be effectively excited by the near ultraviolet (UV) (396 nm) light and exhibited strong red emission around 613 nm, which was attributed to the Eu³⁺ (⁵D₀ → ⁷F₂) transition. The concentration quenching phenomenon was explained based on energy transfer between defect and Eu³⁺ ions, electron–phonon coupling and Eu³⁺–Eu³⁺ interaction. The Judd–Ofelt intensity parameters and radiative properties were estimated by using PL emission spectra. The photometric studies indicate that the obtained phosphors could be a promising red component for possible applications in the field of white light emitting diodes.     

Optical properties,luminescence quenching mechanism and radiation hardness of Eu-doped GaN red powder phosphor

We report on the luminescence quenching mechanism of Eu-doped GaN powder phosphor produced with a low-cost, high yield rapid-ammonothermal method. We have studied as-synthesized and acid rinsed Eu-doped GaN powders with the Eu concentration of ～0.5 at.%. The Eu-doped GaN photoluminescence (PL) was investigated with 325 nm excitation wavelength at hydrostatic pressures up to 7.7 GPa in temperature range between 12 K and 300 K. The room temperature integrated Eu³⁺ ion PL intensity from acid rinsed material is a few times stronger than from the as-synthesized material. The temperature dependent PL studies revealed that the thermal quenching of the dominant Eu³⁺ ion transition (⁵D₀ → ⁷F₂) at 622 nm is stronger in the chemically modified phosphor indicating more efficient coupling between the Eu³⁺ ion and passivated GaN powder grains. Furthermore, it was found that thermal quenching of Eu³⁺ ion emission intensity can be completely suppressed in studied materials by applied pressure. This is due to stronger localization of bound exciton on Eu³⁺ ion trap induced by hydrostatic pressure. Furthermore, the effect of 2 MeV oxygen irradiation on the PL properties has been investigated for highly efficient Eu-doped GaN phosphor embedded in KBr–GaN:Eu³⁺ composite. Fairly good radiation damage resistance was obtained for 1.7 × 10¹² to 5 × 10¹³ cm^?2 oxygen fluence. Preliminary data indicate that Eu-doped GaN powder phosphor can be considered for devices in a radiation environment.     

Synthesis and photoluminescence properties of YVO4:Eu3+, Al3+ phosphor

The Y_0.95?xAl_xVO₄:5%Eu³⁺ (0≤x≤0.1) phosphors were successfully synthesized by solid state reaction at 900 °C for 6 h, and their luminescence properties were investigated under UV and VUV excitation. Monitoring at 619 nm, a strong broad absorption was enhanced by co-doping of Al³⁺ into the YVO₄:Eu³⁺ lattices at 256 nm under UV excitation. The VUV excitation spectra also showed the enhanced excitation bands at about 156 and 200 nm. Under 254 or 147 nm excitation, it was found that Y_0.95?xAl_xVO₄:Eu³⁺(0≤x≤0.1) phosphors showed strong red emission at about 619 nm corresponding to the electric dipole ⁵D₀^–7F₂ transition of Eu³⁺. The improvement of luminescence intensity of YVO₄:Eu³⁺ was also observed after partial substituting Y³⁺ by Al³⁺ and the optimal luminescence intensity appeared with incorporation of 2.5 mol% Al³⁺.     

5D0→7F1 and 5D0→7F2 transition in europium doped halosulphates for mercury-free lamps

Polycrystalline Na₃SO₄F:Eu and NaMgSO₄F:Eu halosulphate phosphors prepared by a wet chemical method have been studied for its photoluminescence (PL) and thermoluminescence (TL) characteristics. Two well resolved peaks are observed at 593 nm and 614 nm, which are assigned to due to ⁵D₀→⁷F₁ and ⁵D₀→⁷F₂ transitions of Eu³⁺ ions. TL is observed at temperatures between 100 °C and 300 °C. In this paper, we report PL emission spectra of Eu³⁺ and TL glow curves, which are more sensitive than the standard TLD-CaSO₄:Dy. The presented phosphors are applicable for the mercury free lamps and solid state lighting devices.     

Green and red photoluminescence from ZnAl2O4:Mn phosphors prepared by sol–gel method

Luminescence investigations of Mn-activated ZnAl₂O₄ phosphors prepared by using sol–gel method were described. The phosphor was characterized by X-ray diffraction (XRD) and electronic paramagnetic resonance (EPR). The EPR spectra of the samples suggested that Mn ions possessed homogeneous distribution in ZnAl₂O₄ phosphors. Photoluminescence studies of the prepared phosphors showed green and red emissions. The red emission became weaker, and vanished at last with sintering temperature increasing from 600 to 900 °C in reducing atmosphere, while the intensity of green emission peak increased. Furthermore, when the phosphor was sintered at 900 °C in air, the intensity of red and green emissions decreased, but the value of intensity ratio increased. It suggested that the green emission resulted from Mn²⁺ and the red emission resulted from Mn⁴⁺.     

Effect of Eu and Pb doping on the dosimetric properties of LiCAF

LiCaAlF₆ (LiCAF) crystals doped with two different ions (europium and lead) have been investigated as potential new dosimetric materials. The stability of thermally stimulated luminescence (TSL) glow peaks in LiCAF:Eu was evaluated by means of the initial rise technique. The decay times at room temperature of the traps related to the dosimetric glow peaks were found to range between 40 and 2 × 10⁴ years confirming the good dosimetric characteristics of this crystal. The glow curve of LiCAF:Pb is dominated by a peak at approximately 300 °C emitting in the UV region (³P_0,1–¹S₀ transition of Pb²⁺) superimposed to a very broad structure at lower temperature (20–200 °C) featuring recombination at an intrinsic defect centre. The anomalous behavior of the low temperature structure during thermal cleaning procedures prevented any reliable numerical analysis of the TSL glow peak at 300 °C.     

Luminescent features of sol–gel derived rare-earth multi-doped oxyfluoride nano-structured phosphors for white LED application

Rare-earth doped oxyfluoride 75SiO₂:25PbF₂ nano-structured phosphors for white-light-emitting diodes were synthesized by thermal treatment of precursor sol–gel derived glasses. Room temperature luminescence features of Eu³⁺, Sm³⁺, Tb³⁺, Eu³⁺/Tb³⁺, and Sm³⁺/Tb³⁺ ions incorporated into low-phonon-energy PbF₂ nanocrystals dispersed in the aluminosilicate glass matrix and excited with UV light emitting diode were investigated. The luminescence spectra exhibited strong emission signals in the red (600, 610, 625, and 646 nm), green (548 and 560 nm), and blue (485 nm) wavelength regions. White-light emission was observed in Sm/Tb and Eu/Tb double-doped activated phosphors employing UV-LED excitation at 395 nm. The dependence of the luminescence emission intensities upon annealing temperature and rare-earth concentration was also examined. The results indicated that there exist optimum annealing temperature and activator ion concentration in order to obtain intense visible emission light with high color rendering index. The study suggests that the nanocomposite phosphor based upon 75SiO₂:25PbF₂ host herein reported is a promising contender for white-light LED applications.     

New synthesis of high-quality storage phosphors

We present a single step synthesis method for the photostimulable X-ray storage phosphor BaFBr:Eu²⁺ which results in a highly sensitive powder with a relatively small average grain size of 5.4 μm. The starting chemical reagents are BaCO₃, NH₄F, NH₄Br and EuF₃. The reaction initiated by the decomposition of the ammonium materials leads to highly volatile hydrogen halide gases which react with the BaCO₃ to form BaFBr at temperatures up to 300 °C. Further heating results in the incorporation of Eu²⁺ and the formation of halide vacancies at temperatures in between 390 and 580 °C. The resulting photostimulated luminescence (PSL) efficiency is optimized after sintering at 800 °C. The reaction process is monitored by differential thermal analysis (DTA) and the reaction products are detected by mass-spectroscopy which confirms the proposed chemical reactions. Intermediate and final products are identified using X-ray diffraction. Photoluminescence (PL) and PSL spectra show the incorporation of Eu²⁺ into the lattice, as well as a PL peak at 470 nm which is not present in the PSL spectrum. This peak is shown to originate from O^2? in the lattice and directly affects the PSL sensitivity.     

Thermo,Iono and photoluminescence properties of 100 MeV Si7+ ions bombarded CaSiO3:Eu3+ nanophosphor

This paper reports on the thermo (TL), iono (IL) and photoluminescence (PL) properties of nanocrystalline CaSiO₃:Eu³⁺ (1–5 mol %) bombarded with 100 MeV Si⁷⁺ ions for the first time. The effect of different dopant concentrations and influence of ion fluence has been discussed. The characteristic emission peaks ⁵D₀→⁷F_J (J=0, 1, 2, 3, 4) of Eu³⁺ ions was recorded in both PL (1×10¹¹–1×10¹³ ions cm^?2) and IL (4.16×10¹²–6.77×10¹² ions cm^?2) spectra. It is observed that PL intensity increases with ion fluence, whereas in IL the peaks intensity increases up to fluence 5.20×10¹² ions cm^?2, then it decreases. A well resolved TL glow peak at ～304 °C was recorded in all the ion bombarded samples at a warming rate of 5 °C s^?1. The TL intensity is found to be maximum at 5 mol% Eu³⁺ concentration. Further, TL intensity increases sub linearly with shifting of glow peak towards lower temperature with ion fluence.     

Novel red phosphor of double perovskite compound La2MgTiO6:xEu3+

A novel red phosphor La₂MgTiO₆:xEu³⁺ was successfully synthesized by the conventional solid state method. Excited by ultraviolet (395 nm) and blue (465 nm) light, La₂MgTiO₆:xEu³⁺ exhibits intense red emission. Due to the lack of inversion symmetry at the doping sites, the dominant emission peak is from the transition ⁵D₀→⁷F₂. Non-radiative transitions were demonstrated to be from dipole–dipole interactions and the critical distance was estimated to be ～9.19 Å. When Eu³⁺ ions' concentration reaches 15%, the emission intensity is about three times higher than that of the conventional phosphor Y₂O₃:Eu³⁺. The Commission International de L'Eclairage chromaticity coordinate was calculated to be x=0.657 and y=0.343. All the results indicate that La₂MgTiO₆:xEu³⁺ has superior luminescence properties.