Comparative study of the spectroscopic properties of Yb3+/Er3+ codoped tellurite glasses modified with R2O (R=Li,Na and K)

Spectroscopic characterization of Yb³⁺/Er³⁺ codoped TeO₂–R₂O–ZnO–Ln₂O₃ glasses as a function of network modifiers (R=Li, Na and K) has been investigated. The Judd–Ofelt parameters (Ω_t), quantum efficiency in near infrared (1.55 μm) and visible up-conversion (546 and 660 nm) and quality factor spectroscopy (χ) were calculated. Three up-conversion emission bands centered at 525, 546 and 660 nm were observed as maxima for glasses containing potassium. The measured lifetime of ⁴I_13/2, ⁴F_9/2 and ⁴S_3/2 from Er³⁺ and ⁴F_5/2 from Yb³⁺ levels increased when potassium (K) replaced lithium (Li) and Na. The maximum emission cross-section (ECS) for ⁴I_13/2→⁴I_15/2 transition of Er³⁺ was calculated to be 1.02×10^?20 cm² for TeO₂–Li₂O–ZnO–Ln₂O₃ glasses. The energy transfer efficiency (ET) from Yb³⁺ to Er³⁺, (⁴F_5/2)+(⁴I_15/2)→(⁴F_7/2)+(⁴I_13/2), was calculated using the measured lifetimes of Yb³⁺ with and without the presence of acceptor (Er³⁺). The maximum calculated ET was 58% for 0.25 mol% of Er³⁺ and 3 mol% of Yb³⁺ for TeO₂–K₂O–ZnO–Ln₂O₃ glass composition.     

Enhanced infrared to visible upconversion emission in Er3+ doped phosphate glass: Role of silver nanoparticles

Phosphate glasses with compositions (59.5–x)P₂O₅–MgO–xAgCl–0.5Er₂O₃ (0.0≤x≤1.5 mol%) containing fixed concentration of Er³⁺ ion with and without silver nanoparticles (NPs) are prepared using melt quenching technique. The amorphous nature of the glass is confirmed using the X-ray diffraction method. The homogeneous distribution of spherical Ag NPs (average size ～37 nm) in the glassy matrix is evidenced from the transmission electron microscopy (TEM) analyses. The UV–vis–NIR absorption spectra shows 10 bands corresponding to ⁴I_13/2, ⁴I_11/2, ⁴I_9/2, ⁴F_9/2, ⁴S_3/2, ²H_11/2, ⁴F_7/2, ⁴F_5/2, ²G_9/2, ⁴G_11/2 transitions in which the most intense bands are ²H_11/2 and ⁴G_11/2. The absorption spectrum of Er³⁺ ions free glass sample containing Ag NPs displays a prominent surface Plasmon resonance (SPR) band located at 528 nm. The infrared to visible frequency upconversion (UC) emission under 797 nm excitation shows two emission bands green (⁴S_3/2–⁴I_15/2) and red (⁴F_9/2–⁴I_15/2) centered at 540 nm and 634 nm, respectively, corresponding to Er³⁺ transitions. An enhancement in UC emission intensity of green band (⁴S_3/2–⁴I_15/2) is observed in the presence of silver NPs and the maximum enhancement occurred for 1.5 mol% AgCl. However, the enhancement of emission intensity of the red band (⁴F_9/2–⁴I_15/2) is smaller. The enhancement of UC emission is understood in terms of the intensified local field effect due to silver NPs.     

Trapping of metastable high-spin species and weak cooperativity in a mononuclear Fe(II) spin-crossover system

The magnetic and structural properties of three gradual spin transition monomeric compounds based on the cation [Fe(Hpt)₃]²⁺ (Hpt=3-(pyrid-2-yl)-1,2,4-triazole) are presented. The non-cooperative character of the spin-crossover in [Fe(Hpt)₃](BF₄)₂·2H₂O (I) is evaluated in light of its calorimetric properties, which yielded the thermodynamic values Δ_trsH=5.81 kJ mol⁻¹ and Δ_trsS=39.5 J mol⁻¹ K⁻¹. The light-induced excited spin-state trapping effect is performed on [Fe(Hpt)₃](BF₄)₂·2H₂O (I) and [Fe(Hpt)₃](SO₄)_0.4(BF₄)_1.2·3H₂O (II), and the subsequent HS→LS relaxations are studied. Their merely first-order kinetics are affected by disorder in the structure of both complexes, which appears in the presence of a distribution of activation energies. HS species can also be frozen-in in I by rapid cooling. Continuous irradiation is shown to induce only apparent light-induced thermal hysteresis effect in I and II, stemming from slow kinetics of relaxation with respect to the kinetics of measurement.     

Determination of rifampicin based on fluorescence quenching of GSH capped CdTe/ZnS QDs

Aqueous glutathione (GSH)-capped CdTe/ZnS QDs with the diameter of 3–4 nm were synthesized. The fluorescence of CdTe/ZnS QDs at 577 nm was quenched in the presence of rifampicin (Rfp), with excitation wavelength at 350 nm. The mechanism of the interaction of CdTe/ZnS QDs with Rfp was investigated. Under the optimal conditions, the calibration plot of ln(F₀/F) was linear in the range 0.83–56 μg mL^?1 with concentration of Rfp, and the detection limit was 0.25 μg mL^?1. The proposed method was successfully applied to the determination of Rfp in its commercial capsules, and satisfactory results were obtained. The recovery of the method was in the range 98.6–103.2%.     

Synthesis and near-infrared luminescence properties of LaOCl:Nd3+/Yb3+

Near-infrared emitting phosphors LaOCl:Nd³⁺/Yb³⁺ were prepared by the solid-state method, and their structures and luminescent properties were investigated by using X-ray diffraction and photoluminescence analysis, respectively. The studies shows that tetragonal LaOCl:Nd³⁺/Yb³⁺ can be synthesized by the solid-state reaction at 600 °C for 3 h. Upon 353 nm UV excitation, LaOCl:Nd³⁺/Yb³⁺ sample shows strong near-infrared emission lines in the region of 1060–1150 nm (corresponding to ⁴F_3/2 → ⁴I_J′ transition of Nd³⁺, J′ = 9/2, 11/2, 13/2, 15/2) and 980–1050 nm (corresponding to ²F_5/2 → ²F_7/2 transition of Yb³⁺). The decreasing emission intensity of Nd³⁺ with increasing doping concentration of Yb³⁺ proved the energy transfer in LaOCl:Nd³⁺/Yb³⁺. The possible near-infrared emission and energy transfer mechanism between Nd³⁺ and Yb³⁺, as well as the energy transfer efficiency of LaOCl:Nd³⁺/Yb³⁺ were discussed.     

Characterization of Sr2.7Ln0.3Fe1.4Co0.6O7 (Ln = La,Nd, Sm,Gd) intergrowth oxides as cathodes for solid oxide fuel cells

Perovskite-related intergrowth oxides Sr_2.7Ln_0.3Fe_1.4Co_0.6O_7 ? δ (Ln = La, Nd, Sm, and Gd) have been investigated as cathode materials for solid oxide fuel cells (SOFC). With decreasing size of the Ln³⁺ ions, the unit cell volume, oxygen content, thermal expansion coefficient (TEC), and total electrical conductivity decrease from Ln = La to Gd. The decreasing unit cell volume and oxygen content is attributed to the decreasing size of Ln³⁺ ions from Ln = La to Gd and a consequent preference for lower coordination numbers. While the decrease in the ionicity of the Ln–O bonds from Ln = La to Gd causes a decrease in the TEC, the increasing amount of oxygen vacancies leads to a decrease in electrical conductivity arising from a thermally activated semiconducting behavior. The cathode polarization conductance (R_p^? 1) measured using the ac-impedance spectroscopy and the catalytic activity for the oxygen reduction reaction in SOFC decrease from Ln = La to Gd partly due to the decrease in electrical conductivity.     

Microwave sol–gel derived NaCaGd(MoO4)3:Er3+/Yb3+ phosphors and their upconversion photoluminescence properties

Ternary molybdate NaCaGd_1−x(MoO₄)₃:Er³⁺/Yb³⁺ phosphors with the proper doping concentrations of Er³⁺ and Yb³⁺ (x = Er³⁺ + Yb³⁺, Er³⁺ = 0, 0.05, 0.1, 0.2 and Yb³⁺ = 0, 0.2, 0.45) were successfully synthesized by microwave sol–gel method for the first time. Well-crystallized particles formed after heat-treatment at 900 °C for 16 h showed a fine and homogeneous morphology with particle sizes of 3–5 μm. The optical properties were examined comparatively using photoluminescence emission and Raman spectroscopy. Under excitation at 980 nm, the doped particles exhibited a strong 525-nm emission band, a weak 550-nm emission band in the green region, which correspond to the ²H_11/2 → ⁴I_15/2 and ⁴S_3/2 → ⁴I_15/2 transitions, and a very weak 655-nm emission band in the red region, which corresponds to the ⁴F_9/2 → ⁴I_15/2 transition. The optimal Yb³⁺:Er³⁺ ratio was obtained to be 9:1, as indicated by the composition-dependent quenching effect of Er³⁺ ions. The pump power dependence of upconversion emission intensity and Commission Internationale de L’Eclairage chromaticity coordinates of the phosphors were evaluated in detail.     

Giant magneto-impedance effect in CoMnSiB amorphous microwires

The giant magneto-impedance (GMI) ratio, ΔZ/Z=[(Z(H)−Z(H_max)]/Z(H_max), in a nearly zero magnetostrictive Co_68.5Mn_6.5Si₁₀B₁₅ amorphous microwire has been investigated for the frequency range 0.5–10 MHz, driving current amplitude of 0.5–2.5 mA, bias DC magnetic field up to 2400 A/m and under applied tensile stress up to 132 MPa. A maximum relative change in the GMI ratio up to around 130% is observed at a frequency of 10 MHz, magnetic DC field of about 180 A/m, driving current amplitude of 1 mA and under tension of 60 MPa. The tensile stress dependence of the magnetic field, H_m, corresponding to the maximum ΔZ/Z ratio allows to estimate the magnetostriction constant (λ_s≈−2×10⁻⁷) to be in good agreement with λ_s values estimated by different methods and in amorphous alloys with similar compositions.     

Self-assembled 3D sphere-like SrMoO4 and SrMoO4:Ln3+ (Ln = Eu,Sm, Tb,Dy) microarchitectures: Facile sonochemical synthesis and optical properties

Three-dimensional (3D) well-defined SrMoO₄ and SrMoO₄:Ln³⁺ (Ln = Eu, Sm, Tb, Dy) hierarchical structures of obvious sphere-like shape have been successfully synthesized using a large-scale and facile sonochemical route without using any catalysts or templates. X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDS), and photoluminescence (PL) spectra were used to characterize the samples. The intrinsic structural feature of SrMoO₄ and external factor, namely the ultrasonic time and the pH value, are responsible for the ultimate shape evolutions of the product. The possible formation mechanism for the product is presented. Additionally, the PL properties of SrMoO₄ and SrMoO₄:Ln³⁺ (Ln = Eu, Sm, Tb, Dy) hierarchical structures were investigated in detail. The Ln³⁺ ions doped SrMoO₄ samples exhibit respective bright red–orange, yellow, green and white light of Eu³⁺, Sm³⁺, Tb³⁺ and Dy³⁺ under ultraviolet excitation, and have potential application in the field of color display. Simultaneously, this novel and efficient pathway could open new opportunities for further investigating about the properties of molybdate materials.     

Structural and luminescence properties of Nd3+-doped PbO–B2O3–TiO2–AlF3 glass for 1.07 μm laser applications

Trivalent neodymium doped multi-component lead borate titanate aluminumfluoride (LBTAFNd) glasses were prepared and characterized as a function of Nd³⁺ ions concentration through optical absorption, NIR luminescence and decay measurements. The intensity (Ω_2,4,6) and other radiative parameters were determined within the frame work of Judd–Ofelt theory. The intensities of absorption bands were expressed in terms of experimental oscillator strengths. Reasonably small root mean square deviation of ±0.384×10^?6 obtained between the experimental and calculated oscillator strengths indicates the validity of intensity parameters. Upon 805 nm laser excitation, the NIR emissions at 0.92 μm (⁴F_3/2→⁴I_9/2), 1.07 μm (⁴F_3/2→⁴I_11/2) and 1.35 μm (⁴F_3/2→⁴I_13/2) were observed. The spectroscopic quality factor has been determined from the Ω₄ and Ω₆ intensity parameters as well as the intensities of emission bands centered at 1.07 and 1.35 μm. The decay curves of the ⁴F_3/2 excited state were recorded by monitoring the emission and excitation wavelengths at 1.07 μm and 805 nm, respectively. The decay curves exhibit single exponential behavior for all the glasses. The laser characteristic parameters of ⁴F_3/2→⁴I_11/2 (1.07 μm) transition were determined and compared with other reported glasses.     

Intense 974 nm emission from ErxYb2−xSi2O7 films through efficient energy transfer up-conversion from Er3+ to Yb3+ for Si solar cell

The optical properties of the Er_xYb_2?xSi₂O₇ thin films were investigated by photoluminescence measurements and the intense 974 nm light emission was observed. The 974 nm emission was mainly from the transition ²F_5/2 to ²F_7/2 level of Yb³⁺ upon exploring energy-transfer via up-conversion at Er^{3+ 4}I_13/2 level. Under 972 nm excitation, the lifetime at Er^{3+ 4}I_13/2 level reaches up to 4 ms for film containing 2 at% Er³⁺, while decreases to about 20 μs as the film is pumped by 488 nm. This confirmed that the energy transfer up-conversion process was the dominant transition at Er^{3+ 4}I_13/2 level. This may be of interest to improve the solar cells′ efficiency by placing this film at the rear of cell, converting the near-infrared photons between 1480 nm and 1580 nm to just above the Si bandgap.     

Quasi-one dimensional Er3+–Yb3+ codoped single-crystal MoO3 ribbons: Synthesis,characterization and up-conversion luminescence

The quasi-one dimensional (Q1D) Er³⁺–Yb³⁺ codoped single-crystal MoO₃ ribbons with width range from 1 to 5 μm, and maximum length about 30 μm have been synthesized by the vapor transport method. The samples were characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscope, and luminescence spectra. By a 975 nm laser diode (LD) as excitation source, the blue, green and red emission bands centered at about 408, 532, 553 and 657 nm were detected, which attributed to the ²H_9/2 → ⁴I_15/2, ²H_11/2, ⁴S_3/2 → ⁴I_15/2 and ⁴F_9/2 → ⁴I_15/2 transitions of Er³⁺, respectively. The three-, and two-photon process was responsible for the blue, green and red up-conversion emissions mechanism for the Q1D Er³⁺–Yb³⁺ codoped single-crystal MoO₃ ribbons, respectively. The results suggested that the Q1D Er³⁺–Yb³⁺ codoped single-crystal MoO₃ ribbons will have potential applications in remote bio-imaging and surface enhanced Raman scattering.     

Photoluminescence of AgGaS2 and CuGaS2 doped with rare-earth impurities

Photoluminescence (PL) related to rare-earth (RE) impurities (Ho, Er and Eu) in AgGaS₂ and CuGaS₂ crystals has been studied. In Ho-doped AgGaS₂ and CuGaS₂, two series of PL lines are observed in 1.86–1.92 eV region and 2.24 eV region, and they are assigned to ⁵F₃–⁵I₇ and ⁵S₂–⁵I₈ transitions of the Ho³⁺ ion, respectively. Similarly, in Er-doped AgGaS₂ and CuGaS₂, Er³⁺-related two PL series are observed: 1.83–1.88 eV region (⁴F_9/2–⁴I_15/2) and 2.22–2.26 eV region (⁴S_3/2–⁴I_15/2). For both Ho and Er impurities, the profile of the PL spectrum in AgGaS₂ is complex, and PL exhibited large number of lines compared with that in CuGaS₂. The differences in PL spectra between this two compounds are related to the crystal field at the cation site and the local atomic arrangement of the RE impurities. This work also refers to the PL band at 2.28 eV observed for the Eu-doped AgGaS₂ crystal.     

Ho:LaF3 single crystal as potential material for 2 μm and 2.9 μm lasers

Optical properties of a Ho-doped LaF₃ single crystal have been detailed investigated as a promising material for 2 μm and 2.9 μm lasers for the first time. Judd–Ofelt theory was applied to analyze the absorption spectrum to determine the J–O intensity parameters Ω_t(t=2,4,6), based on which the emission probabilities, branching ratio and radiative lifetime for the as-grown crystal were all calculated. The stimulated emission cross-sections of the ⁵I₇ → ⁵I₈ and ⁵I₆ → ⁵I₇ transitions were obtained by using the Fuchtbauer–Ladenburg method. The gain cross-section for 2 μm emission becomes positive once the population inversion level reaches 30%. The Ho:LaF₃ crystal shows long fluorescence lifetime of ⁵I₇ manifold (25.81 ms) as well as ⁵I₆ manifold (10.37 ms) compared with other Ho³⁺-doped crystals. It can be proposed that the Ho:LaF₃ crystal may be a promising material for 2 μm and 2.9 μm laser applications.     

Investigation on the interactions of silymarin to bovine serum albumin and lysozyme by fluorescence and absorbance

The interactions of silymarin with bovine serum albumin (BSA) and lysozyme (LYS) were investigated in physiological buffer (pH = 7.4) by fluorescence spectroscopy and UV–vis absorption spectroscopy. The mechanism study indicated that silymarin could strongly quench the intrinsic fluorescence of BSA and LYS through static quenching procedures. At 291 K, the values of the binding constant K_A were 4.20×10⁴ and 4.71×10⁴ L mol^?1 for silymarin–BSA and silymarin–LYS, respectively. Using thermodynamic equations, the conclusion that hydrophobic and electrostatic forces played an important role in stabilizing complex of silymarin–BSA or silymarin–LYS was obtained. The effects of Cu²⁺, Mg²⁺, Ca²⁺, Fe²⁺, and Fe³⁺ on the binding were also studied at 291 K. According to Förster’s nonradiative energy transfer theory, the distances r₀ between donor and acceptor were calculated to be 3.36 and 2.71 nm for silymarin–BSA and silymarin–LYS, respectively. Synchronous fluorescence spectra showed that the conformation of BSA and LYS were changed by silymarin.     

Synthesis and up-conversion luminescence properties of Ho3+, Yb3+ co-doped BaLa2ZnO5

Up-conversion phosphors BaLa₂ZnO₅ co-doped with Ho³⁺/Yb³⁺ were synthesized by high temperature solid-state reaction method. The phase composition of the phosphors was characterized by X-ray diffraction (XRD). The structure of BaLa₂ZnO₅: 0.75% Ho/15% Yb phosphor was refined by the Rietveld method and results showed the decreased unit cell parameters and cell volume after doping Ho³⁺ and Yb³⁺, indicating Ho³⁺ and Yb³⁺ have successfully replaced La³⁺. Under the excitation of 980 nm diode laser, the strong green and weak red up-conversion emissions centered at 548 nm, 664 nm and 758 nm were observed, which originating from ⁵S₂, ⁵F₂→⁵I₈, ⁵F₄→⁵I₈ and ⁵S₂, ⁵F₂→⁵I₇ transitions of Ho³⁺ ions, respectively. The optimum doping concentrations of Ho³⁺ and Yb³⁺ were determined to be 0.75% and 15%, and the corresponding Commission International de L'Eclairage (CIE) coordinates are calculated to be x=0.298 and y=0.692. The related UC mechanism of Ho³⁺/Yb³⁺ co-doped BaLa₂ZnO₅ depending on pump power was studied in detail. The results indicate that BaLa₂ZnO₅: Ho³⁺/Yb³⁺ can be an effective candidate for up-conversion yellowish-green light emitter.     

Microwave sol-gel process of KGd(WO4)2:Ho3+/Yb3 phosphors and their upconversion photoluminescence properties

Double tungstate KGd_1−x(WO₄)₂:Ho³⁺/Yb³⁺ phosphors with doping concentrations of Ho³⁺ and Yb³⁺ (x=Ho³⁺+Yb³⁺, Ho³⁺=0.05, 0.1, 0.2 and Yb³⁺=0.2, 0.45) were successfully synthesized by the microwave sol–gel method, and the upconversion mechanisms were investigated in detail. The synthesized particles formed after heat-treatment at 900 °C for 16 h showed a well crystallized morphology with particle sizes of 2–5 μm. Under excitation at 980 nm, the UC intensities of KGd_0.7(WO₄)₂:Ho_0.1Yb_0.2 and KGd_0.5(WO₄)₂Ho_0.05Yb_0.45 particles exhibited yellow emissions based on a strong 550-nm emission band in the green region and a strong 655-nm emission band in the red region, which were assigned to the ⁵S₂/⁵F₄→⁵I₈ and ⁵F₅→⁵I₈ transitions, respectively. The Raman spectra of the doped particles indicated the presence of strong peaks at higher frequencies of 764, 812, 904, 984, 1050, 1106, 1250 and 1340 cm⁻¹ induced by the disorder of the [WO₄]²⁻ groups with the incorporation of the Ho³⁺ and Yb³⁺ elements into the crystal lattice or by a new phase formation.     

Synthesis of TiO2 nanoparticles and spectroscopic upconversion luminescence of Nd3+-doped TiO2–SiO2 composite glass

Nd³⁺-doped TiO₂–SiO₂ composites were prepared by sol–gel method. Optical properties such as radiative life-time (τ), stimulated emission cross-section (σ_p) and branching ratio (β) were calculated using Judd–Ofelt theory. Violet to blue upconversion emissions at 380 nm (⁴D_3/2→⁴I_11/2), 399 nm (²P_3/2→⁴I_11/2), 420 nm (²D_5/2→⁴I_9/2) and 452 nm (²P_3/2→⁴I_13/2) were obtained under 578 nm xenon-lamp excitation. The choice of 578 nm is justified by the absorption spectra of the same samples, which shows a strong absorption peak at 578 nm. This 578 nm excitation pump produces upconversion in Nd³⁺ by a sequential two-photon absorption process.     

1.34 μm fluorescence and laser properties of Nd:La0.11Y0.89VO4 crystal

For Nd:La_xY_1−xVO₄ (x = 0.11) crystal, the ⁴F_3/2 → ⁴I_13/2 transition property was investigated for the first time. The fluorescence peak of Nd:La_0.11Y_0.89VO₄ crystal exhibited obvious inhomogeneous broadening comparing with that of Nd:YVO₄ crystal. With laser diode array as pump source, 1.34 μm continuous-wave (CW) and active Q-switched laser operations based on ⁴F_3/2 → ⁴I_13/2 transition were realized. For CW laser operation, the maximum output power of 2.47, 2.13 W is obtained with slope efficiencies of 29.4%, 27.6%, and optical to optical conversion efficiency of 26.2%, 24.7%, respectively for a, c cut crystal samples. For acousto-optic (AO) Q-switched laser operation, the shortest pulse width, highest peak power and maximum pulse energy came from the a-cut sample, which were 13 ns, 2.69 kW and 35 μJ, respectively.     

Theoretical studies of the dependence of EPR g-factors on local structure for the trigonal Er3+–VK centres in KMgF3 and KZnF3

The dependence of the EPR g-factors on the local structural parameter for a 4f¹¹ configuration ion Er³⁺ in a trigonal crystal-field has been studied by diagonalizing the 364×364 complete energy matrices. Our studies indicate that the EPR spectra of the trigonal Er³⁺–V_K centers in KMgF₃ and KZnF₃ may be attributed to the translation of the cubic Kramers doublet Γ₇. Furthermore, the EPR g-factors of the trigonal Er³⁺–V_K centers may be interpreted reasonably by the shifts ΔZ≈0.340 Å and ΔZ≈0.303 Å of the Er³⁺ ions toward the charge compensator V_K along the C₃ axis for the KMgF₃:Er³⁺ and the KZnF₃:Er³⁺ systems respectively.