Identification of Silymarin Constituents: An Improved HPLC–MS Method

A high-performance liquid chromatographic/tandem mass spectrometric method was developed for the determination of the major bioactive flavonolignans in silymarin, a herbal remedy extracted from the milk thistle Silybum marianum. In this study, eight active components of silymarin with the same elemental composition, including silychristins A and B, silydianin, silybin A and B, isosilybin A and B and an unknown compound were completely separated. Furthermore, three additional components were detected and partly separated; presumably two silybin stereoisomers and one isosilybin stereoisomer. The collision-induced dissociation (CID) MS/MS spectra of these silymarin constituents were studied: the spectral similarity values of the component pairs were determined, and simple criteria were found for distinguishing the components.

     

Electrochemical investigation of flavonolignans and study of their interactions with DNA in the presence of Cu(II)

Flavonolignans, silybin and its derivatives (2,3-dehydrosilybin, 7-O-methylsilybin, 20-O-methylsilybin) and isosilybin were studied using ex situ (adsorptive transfer, AdT) cyclic and square wave voltammetry (SWV). The two oxidation steps were described for flavonolignans at potentials E_p1 + 0.5 V and E_p2 + 0.85 V depending on experimental conditions. An additional oxidation peak at E_p3 + 0.35 V was observed only for 2,3-dehydrosilybin. The anodic currents of flavonolignans are related to their electron transfer processes (oxidation of hydroxyl groups), which was supported by density functional theory (DFT) and B3P86 theory level. Our electrochemical results confirmed that 2,3-dehydrosilybin is a relatively strong antioxidant, which is strictly associated with oxidation at E_p3. The oxidation processes and antioxidant parameters of flavonolignans can be affected by transition metal complexation via hydroxyl groups. We found that silybin and 2,3-dehydrosilybin are able to chelate transition metals, especially Cu²⁺. The formation of silybin/Cu complexes was studied by AdT SWV and the observation was also confirmed using fluorescence spectroscopy. The electrochemical investigation of DNA interactions and damage caused in the presence of silybin/Cu complex and hydrogen peroxide is described. We present evidence that flavonolignans are involved not only in antioxidant abilities but also in the prooxidation effects under in vitro conditions.     

Isolation and purification of diastereoisomeric flavonolignans from silymarin by binary‐column recycling preparative high‐performance liquid chromatography

Silymarin extracted from Silybum marianum (L.) Gaertn consists of a large number of flavonolignans, of which diastereoisomeric flavonolignans including silybin A and silybin B, and isosilybin A and isosilybin B are the main bioactive components, whose preparation from the crude extracts is still a difficult task. In this work, binary‐column recycling preparative high‐performance liquid chromatography systems without sample loop trapping, where two columns were switched alternately via one or two six‐port switching valves, were established and successfully applied to the isolation and purification of the four diastereoisomeric flavonolignans from silymarin. The proposed system showed significant advantages over conventional preparative high‐performance liquid chromatography with a single column in increasing efficiency and reducing the cost. To obtain the same amounts of products, the proposed system spends only one tenth of the time that the conventional system spends, and needs only one eleventh of the solvent that the conventional system consumes. Using the proposed system, the four diastereoisomers were successfully isolated from silymarin with purities over 98%.     

Validated Optimized Method for Simultaneous Analysis of Active Silymarin Components and Dimethyl-4,4′-dimethoxy-5,6,5′,6′-dimethylene Dioxybiphenyl-2,2′-dicarboxylate in a Pharmaceutical Preparation by Use of a Monolithic Silica C18 Column

A simple, rapid, and sensitive isocratic reversed-phase LC method using a monolithic column has been developed and validated for simultaneous analysis of the active components of silymarin [taxifolin, silydianin, silychristin, diastereomers of silybin (silybin A and B), and diastereomers of isosilybin (isosilybin A and B)] and dimethyl-4,4′-dimethoxy-5,6,5′,6′-dimethylene dioxybiphenyl-2,2′-dicarboxylate in a commercial formulation. The mobile phase was a 45:55 (v/v) mixture of methanol and 5 mM NaH₂PO₄ (adjusted to pH 2.75 with phosphoric acid) at a flow rate of 1.5 mL min^?1. UV detection was performed at 288 nm and quantification was based on peak area. The method was validated for linearity, accuracy, precision, selectivity, and robustness.     

Simultaneous determination of anti‐diabetes/anti‐obesity drugs by LC/PDA,and targeted analysis of sibutramine analog in dietary supplements by LC/MS/MS

The safety of dietary supplements is questionable as there have been occasional reports of products contaminated with illegal adulterants. The present study was carried out to develop trustworthy methodologies to screen for six anti‐diabetic drugs (phenformin, rosiglitazone, glipizide, glimepiride, glybenclamide and gliclazide) and six anti‐obesity drugs (ephedrine, fenfluramine, T3, T4, fluoxetine and sibutramine) in dietary supplements. A simultaneous determination method of the 12 drugs by liquid chromatography coupled with a photodiode array (LC/PDA) was established and was validated for linearity (r² > 0.99), precision (RSD <13.3%), recoveries (88.8–115.9%) and reproducibility. Sibutramine and its analogs, N‐desmethylsibutramine, were subject to further investigation by LC/MS/MS because they were one of the major illegal adulterants. Our proposed method to monitor illegal drug adulterations in dietary supplements using LC/PDA is a simple and reliable, and therefore applicable to routine drug‐adulteration screening. Copyright © 2009 John Wiley & Sons, Ltd.     

固相萃取法纯化制备水飞蓟宾和异水飞蓟宾

水飞蓟宾和异水飞蓟宾是水飞蓟素中的主要有效成分,其纯化制备主要借助柱色谱法,制备量大,纯化效果好,但过程非常费时。该研究的主要目的是利用更为快速高效的固相萃取(SPE)法从水飞蓟粗提物中分离纯化水飞蓟宾和异水飞蓟宾。建立了用于分析水飞蓟宾和异水飞蓟宾的高相液相色谱法,通过优化洗脱梯度,实现了水飞蓟宾、异水飞蓟宾与其他组分的分离。试用了3种保留机理不同的SPE填料,包括亲水亲脂(HLB)填料、亲水色谱(HILIC)填料及反相C18硅胶填料。通过对比发现C18硅胶对目标化合物的选择性最佳。进一步控制SPE的淋洗及洗脱条件,收集相应的洗脱液,经氮吹干燥后得到纯化的样品。提纯后的水飞蓟宾和异水飞蓟宾混合物的纯度可达94%以上。水飞蓟宾和异水飞蓟宾的平均回收率分别为70.5%~81.7%和66.7%~81.8%,相对标准偏差分别为2.7%~9.4%和1.5%~6.1%。该方法简单、高效,免去传统分离纯化过程中长时间的柱色谱分离过程,适合制备纯度较高的水飞蓟宾和异水飞蓟宾的二元混合标准样品。     

Detection of S‐adenosylhomocysteine and methylation index in blood by capillary electrophoresis

This work proposes an approach to the direct analysis of S‐adenosylhomocysteine (SAH) and the methylation index in blood using CE with UV detection (CE‐UV). After application of meglumine postinjection, we achieved SAH in‐capillary preconcentration in the HClO₄ extracts of erythrocytes, which improved the detection limit (S/N = 3) of SAH up to 3 fmol or 180 nmol/L at the injection volume of 50 nL, taking into account the sample dilution rate. CE‐UV was carried out in 30 mM glycine and 45 mmol/L HCl (pH ～1.8) at 17 kV in a capillary 48 cm in length and 50 μm id. Accuracy of the technique was 101% and reproducibility was about 12%.     

Simultaneous analysis of 35 specific antihypertensive adulterants in dietary supplements using LC/MS/MS

A sensitive and specific LC/MS/MS method was developed for the simultaneous analysis of 35 compounds used for treating hypertension as adulterants in dietary supplements. The method was validated for specificity, linearity, accuracy, precision, limit of detection, limit of quantitation, stability and recovery. The limit of detection and limit of quantitation ranged from 0.20 to 20.0 and 0.50 to 60.0 ng/g, respectively. The linearity was good (r ² > 0.999), with intra‐ and interday precision levels of 0.43–7.87% and 0.65–9.95% and the intra‐ and interday accuracies of 84.36–115.82% and 83.78–118.69%, respectively. The stability (relative standard deviation) was <14.75%. The mean recovery was 80.81–117.86% (relative standard deviation <10.00%). Ninety‐seven commercial dietary supplements available in South Korea were analyzed. While none contained detectable amounts of the 35 antihypertensive compounds, the developed LC/MS/MS procedure can be used for routine analysis to monitor illegal adulteration in various forms of dietary supplements.     

Stability study of α-bromophenylacetic acid: Does it represent an appropriate model analyte for chiral separations?

The stability of α-bromophenylacetic acid (BPAA) in 50% aqueous methanol solution has been tested. CE in different running buffers was used to separate BPAA from the decomposition reaction products α-hydroxyphenylacetic (mandelic) acid and α-methoxyphenylacetic acid. Suitable CE separation of all three compounds and other product, bromide, was achieved in 60 mmol/L formate buffer (pH 3.0) at −30 kV in 50 μm (i.d.) poly(vinyl alcohol)-coated fused silica capillary (30 cm/24.5 cm) with UV detection at 200 nm. The CE method was applied to determine the reaction order of the decomposition of BPAA (0.47 mmol/L) via nucleophilic substitution in 50% aqueous methanol. The first-order reaction kinetics was confirmed by linear and non-linear regression, giving the rate constants 1.52 × 10⁻⁴ ± 2.76 × 10⁻⁵ s⁻¹ and 7.89 × 10⁻⁵ ± 5.02 × 10⁻⁶ s⁻¹, respectively. Additionally, the degradation products were identified by CE coupled to mass spectrometric (MS) detection. The CE–MS experiments carried out in 60 mmol/L formate buffer (pH 3.0) and in 60 mmol/L acetate buffer (pH 5.0) confirmed the results obtained by CE–UV. Furthermore, the stability of BPAA in polar solvents was tested by ¹H NMR experiments. Our results provide strong evidence of the instability and fast degradation of BPAA in 50% aqueous methanol indicating that BPAA is not suitable as the model analyte for chiral separations.     

Quality by design-assisted development of a capillary electrophoresis method for the enantiomeric purity determination of tenofovir

A CE method was developed and validated for the assessment of the chiral purity of the drug tenofovir applying a quality by design approach. Following selection of a quaternary ammonium β-CD as chiral selector, a fractional factorial resolution V+ design was employed for identification of the critical process parameters, while a central composite design served for method optimization. The final method used a 40/50.2 cm, 50 μm id fused-silica capillary, a BGE composed of a 100 mM sodium phosphate buffer, pH 6.4, containing 45 mg/mL quaternary ammonium β-CD, an applied voltage of 18 kV, and a capillary temperature of 22°C. Robustness was assessed by a Plackett–Burman design. The method was validated according to guideline Q2(R1) of the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use and enabled the determination of the (S)-enantiomer of tenofovir at the 0.1% level.     

Fully automated method based on on-line molecularly imprinted polymer solid-phase extraction for determination of lovastatin in dietary supplements containing red yeast rice

A fully automated method for the determination of lovastatin in dietary supplements containing red yeast rice has been developed. It uses a sequential injection analysis system combined with solid-phase extraction applying highly selective molecularly imprinted polymer sorbent. A miniaturized column for on-line extraction was prepared by packing 4.5 mg of the sorbent in a 5.0 × 2.5-mm-i.d. cartridge, which was used in the flow manifold. Sequential injection analysis manifold enabled all steps of lovastatin extraction and continuous spectrophotometric detection at 240 nm. A limit of detection of 60 μg g⁻¹, a limit of quantitation of 200 μg g⁻¹, and a linear calibration range of 200–2000 μg g⁻¹ were achieved. Intra-day and inter-day precision values (RSD) were ≤ 6.7% and ≤ 4.9%, respectively, and method recovery values of spiked red yeast rice extracts at 200, 1000, and 2000 μg g⁻¹ concentration levels were 82.9, 95.2, and 87.7%. Our method was used for determination of lovastatin lactone in four dietary supplements containing red yeast rice as a natural source of lovastatin, also known as monacolin K. The extracted samples were subsequently analyzed by the reference UHPLC-MS/MS method. Statistical comparison of results (F test, t test, α = 0.05) obtained by both methods did not reveal significant difference. A substantial advantage of the new automated approach is high sample throughput thanks to the analysis time of 7.5 min, miniaturization via down-scaling the extraction column, and smaller sample and solvent consumption, as well as reduced generation of waste.

ᅟ

     

Dispersive liquid–liquid microextraction of five chlorophenols in water samples followed by determination using capillary electrophoresis

Dispersive liquid–liquid microextraction (DLLME) coupled with CE was developed for simultaneous determination of five types of chlorophenols (CPs), namely 2‐chlorophenol (2‐CP), 4‐chlorophenol (4‐CP), 2,4‐dichlorophenol (2,4‐DCP), 2,6‐dichlorophenol (2,6‐DCP), and 2,4,6‐trichlorophenol (2,4,6‐TCP) in water samples. Several parameters affecting DLLME and CE conditions were systematically investigated. Under the optimized DLLME‐CE conditions, the five CPs were separated completely within 7.5 min and good enrichment factors were obtained of 40, 193, 102, 15, and 107 for 4‐CP, 2,4,6‐TCP, 2,4‐DCP, 2‐CP, and 2,6‐DCP, respectively. Good linearity was attained in the range of 1–200 μg/L for 2,4,6‐TCP, 2,4‐DCP, 2−300 μg/L for 4‐CP and 2‐CP, and 1−300 μg/L for 2,6‐DCP, with correlation coefficients (r) over 0.99. The LOD (S/N = 3) and the LOQ (S/N = 10) were 0.31−0.75 μg/L and 1.01−2.43 μg/L, respectively. Recoveries ranging from 60.85 to 112.36% were obtained with tap, lake, and river water spiked at three concentration levels and the RSDs (for n = 3) were 1.31–11.38%. With the characteristics of simplicity, cost‐saving, and environmental friendliness, the developed DLLME‐CE method proved to be potentially applicable for the rapid, sensitive, and simultaneous determination of trace CPs in complicated water samples.     

Capillary electrophoretic determination of ammonia using headspace single-drop microextraction

A new method involving headspace single-drop microextraction (SDME) and capillary electrophoresis (CE) is developed for the preconcentration and determination of ammonia (as dissolved NH₃ and ammonium ion). An aqueous microdrop (5 μL) containing 1 mmol/L H₃PO₄ and 0.5 mmol/L KH₂PO₄ (as internal standard) was used as the acceptor phase. Common experimental parameters (sample and acceptor phase pH, extraction temperature, extraction time) affecting the extraction efficiency were investigated. Proposed SDME-CE method provided about 14-fold enrichment in about 20 min. The calibration curve was linear for concentrations of NH₄⁺ in the range from 5 to 100 μmol/L (R² = 0.996). The LOD (S / N = 3) was estimated to be 1.5 μmol/L of NH₄⁺. Such detection sensitivity is high enough for ammonia determination in common environmental and biological samples. Finally, headspace SDME was applied to determine ammonia in human blood, seawater and milk samples with spiked recoveries in the range of 96-107%.     

Determination of lipoic acid in human urine by capillary zone electrophoresis

Fast, simple, and accurate CE method enabling determination of lipoic acid (LA) in human urine has been developed and validated. LA is a disulfide‐containing natural compound absorbed from the organism's diet. Due to powerful antioxidant activity, LA has been used for prevention and treatment of various diseases and disorders, e.g. cardiovascular diseases, neurodegenerative disorders, and cancer. The proposed analytical procedure consists of liquid–liquid sample extraction, reduction of LA with tris(2‐carboxyethyl)phosphine, derivatization with 1‐benzyl‐2‐chloropyridinium bromide (BCPB) followed by field amplified sample injection stacking, capillary zone electrophoresis separation, and ultraviolet‐absorbance detection of LA‐BCPB derivative at 322 nm. Effective baseline electrophoretic separation was achieved within 6 min under the separation voltage of 20 kV (∼80 μA) using a standard fused‐silica capillary (effective length 51.5 cm, 75 μm id) and BGE consisted of 0.05 mol/L borate buffer adjusted to pH 9. The experimentally determined limit of detection for LA in urine was 1.2 μmol/L. The calibration curve obtained for LA in urine showed linearity in the range 2.5–80 μmol/L, with R ² 0.9998. The relative standard deviation of the points of the calibration curve was lower than 10%. The analytical procedure was successfully applied to analysis of real urine samples from seven healthy volunteers who received single 100 mg dose of LA.     

Development of a stability-indicating capillary electrophoresis method for norfloxacin and its inactive decarboxylated degradant

A simple, accurate, precise, rapid and sensitive stability-indicating capillary electrophoresis (CE) method was optimized and validated for the simultaneous determination of norfloxacin and its inactive decarboxylated degradant in pharmaceuticals. The univariant method was used to optimize electrophoretic factors including injection time, separation voltage and column temperature. Electrolyte concentration and pH were optimized using the factorial design and response surface methods. The optimum conditions obtained were: 10 mmol l^− 1 phosphate at pH 2.5, hydrodynamic injection time of 8 s at pressure 0.5 p.s.i., separation voltage 25 kV and column temperature 25 °C. The separation was carried out into a fused-silica capillary column (31.2 cm length × 50 μm i.d.) with detection at 301 and 285 nm for the intact drug and the degradant, respectively using a diode array detector. For both analytes, the method enjoys wide dynamic range (1-50 μg ml^− 1) with good detectability (limits of detection 0.11 μg ml^− 1). In addition, acceptable accuracy (recovery > 95%); and good repeatability and intermediate precision (RSD < 3.5%) were obtained.     

Simultaneous determination of diclofenac and its common counter‐ions in less than 1 minute using capillary electrophoresis with contactless conductivity detection

This paper presents a method for fast and simultaneous determination of diclofenac (DCF) and its common counter‐ions (potassium, sodium, and diethylammonium) using CE with capacitively coupled contactless conductivity detection (CE‐C⁴D). On the basis of a single electropherogram (about 50 s), the proposed method allows the determination of the stoichiometry, absolute quantification and evaluation of the degradation degree of the active pharmaceutical ingredient (DCF). A linear working range from 100 to 500 μmol/L was obtained for all analytes in an equimolar TRIS/TAPS (10 mmol/L) solution as the background electrolyte as well as adequate LOD (7, 6, 7, and 10 μmol/L for K⁺, Na⁺, diethylammonium, and DCF, respectively). The proposed method was applied to the analysis of pharmaceutical formulations (tablets and spray form) with similar results to those achieved by HPLC (DCF) or flame photometry (K and Na) at a 95% confidence level.     

Diffuse-reflectance Fourier transform-infrared spectroscopic microanalysis of the flavonolignans

Diffuse-reflectance Fourier transform-infrared spectroscopic (DRIFT) microanalysis (10 g samples) of a selected series of flavonoids was studied, comparing to transmission FT-IR spectroscopic analysis of the same samples at the mg level. DRIFT was shown to be a useful, sample-saving and reliable IR technique for the structural analysis and compound identification of the mainSilybum genus 3-OH-flavonolignans (silybin, isosilybin, silydianin, silychristin and isosilychristin) and the dihydroflavonol taxifolin.     

Determination of the enantiomeric and diastereomeric impurities of RS‐glycopyrrolate by capillary electrophoresis using sulfated‐β‐cyclodextrin as chiral selectors

A practical chiral CE method, using sulfated‐β‐CD as chiral selector, was developed for the enantioseparation of glycopyrrolate containing two chiral centers. Several parameters affecting the separation were studied, including the nature and concentration of the chiral selectors, BGE pH, buffer type and concentration, separation voltage, and temperature. The separation was carried out in an uncoated fused‐silica capillary of (effective length 40 cm) × 50 μm id with a separation voltage of 20 kV using 30 mM sodium phosphate buffer (pH 7.0, adjusted with 1 M sodium hydroxide) containing 2.0% w/v sulfated‐β‐CD at 25°C. Finally, the method for determining the enantiomeric impurities of RS‐glycopyrrolate was proposed. The method was further validated with respect to its specificity, linearity range, accuracy and precision, LODs, and quantification in the expected range of occurrence for the isomeric impurities (0.1%).     

Determination of lithium and transition metals in Li1Ni1/3Co1/3Mn1/3O2 (NCM) cathode material for lithium‐ion batteries by capillary electrophoresis

In this work, we present a novel electrophoretic method that was developed for the determination of lithium and transition metals in LiNi_1/3Co_1/3Mn_1/3O₂ cathode material after microwave digestion. The cations in the digested LiNi_1/3Co_1/3Mn_1/3O₂ material were separated by CE and the element content was determined by UV/Vis detection. To characterize the precision of the measurements, the RSDs and concentrations were calculated and compared to those obtained with ICP‐optical emission spectrometry (ICP‐OES). Furthermore, a certified reference material (BCR 176R —fly ash) was investigated for all techniques. For active material components, the LOD and LOQ were determined. The LODs and LOQs for the metals determined by CE were as follows: lithium (LOD/LOQ): 17.41/62.70 μg/L, cobalt (LOD/LOQ): 348.4/1283 μg/L, manganese (LOD/LOQ): 540.2/2095 μg/L, and nickel (LOD/LOQ): 838.0/2982 μg/L. Recovery rates for lithium were in the range of 95–103%. It could be proven that with the new technique, the results for the determination of the lithium content of active material were comparable with those obtained by ICP‐OES and ion chromatography. Furthermore, the recovery rates of the transition metals were determined to be between 96 and 110% by CE and ICP‐OES.     

Development and validation of an ultra‐performance convergence chromatography method for the quality control of Angelica gigas Nakai

Ultra‐performance convergence chromatography, which integrates the advantages of supercritical fluid chromatography and ultra high performance liquid chromatography technologies, is an environmentally friendly analytical method that uses dramatically reduced amounts of organic solvents. An ultra‐performance convergence chromatography method was developed and validated for the quantification of decursinol angelate and decursin in Angelica gigas using a CSH Fluoro‐Phenyl column (2.1 mm × 150 mm, 1.7 μm) with a run time of 4 min. The method had an improved resolution and a shorter analysis time in comparison to the conventional high‐performance liquid chromatography method. This method was validated in terms of linearity, precision, and accuracy. The limits of detection were 0.005 and 0.004 μg/mL for decursinol angelate and decursin, respectively, while the limits of quantitation were 0.014 and 0.012 μg/mL, respectively. The two components showed good regression (correlation coefficient (r²) > 0.999), excellent precision (RSD < 2.28%), and acceptable recoveries (99.75–102.62%). The proposed method can be used to efficiently separate, characterize, and quantify decursinol angelate and decursin in Angelica gigas and its related medicinal materials or preparations, with the advantages of a shorter analysis time, greater sensitivity, and better environmental compatibility.