Reversed-flow gas chromatographic study of interaction between the components of a salt-modified adsorbent

Summary The new Technique of reversed-flow gas chromatography was used to study the possible interactions between the two components of salt-modified adsorbents. The inert volatile solutes weren-hexane and benzene. Partition ratios of these solutes on the modified adsorbents, at various temperatures, were measured, followed by the determination of the differential enthalpies of adsorption. The plots of these enthalpies versus mole fraction of the modifier show a minimum for benzene and a maximum forn-hexane. These are taken as indications of an interaction between the components of the modified adsorbent.     

Liquid chromatography of benzene derivatives on a porous methacrylate copolymer containing epoxy groups

Summary The retention of benzene derivatives with nonpolar and polar substituents on a porous methacrylate copolymer containing epoxy groups using both nonpolar and polar eluents was investigated. When n-hexane is used as the eluent, the retention of n-alkylbenzenes and polymethylbenzenes is weaker than that of benzene. In the case of benzene derivatives containing polar functional groups their capacity ratios (k) on this porous polymer increases approximately linearly with the increase of the adsorbate molecules dipole moment. The retention characteristics of the methacrylate copolymer were compared with that of a styrene-divinylbenzene copolymer and silica gels with a hydroxylated surface and with a surface modified by chemically bonded alkylsilyl groups.     

Selectivity of liquid-adsorption chromatography on hydroxylated silica gel with nonpolar and polar eluents

Summary The effect of nonpolar (hexane, decane, benzene) and polar (water, isopropanol, water+isopropanol) eluents on separation of aromatic hydrocarbons and their derivatives in liquid-adsorption chromatography on hydroxylated silica gel columns has been studied. The work has revealed that the traditional application areas of hydroxylated silica gel in liquid chromatography may be extended. In particular it has been shown that, first, polar compounds may be separated on hydroxylated silica gel with nonpolar eluents at high temperatures (100–150°C) and that polar and nonpolar compounds may be separated using pure water as eluent. The effect of adsorbed moisture on retention behaviour of silica gel with nonpolar eluents has also been investigated.Presented at the 14th International Symposium on Chromatography London, September, 1982     

Study of retention of isomeric aromatic hydrocarbons on GTCB and cyclodextrins

Summary A study has been made of the interaction between graphitized thermal carbon-black and cyclodextrins and a series of 28 derivatives of benzene (benzene, alkyl-, isoalkyl-, dialkyl-, trialkylbenzenes, vinyl-, and allyl-benzene). The specificretention volumes form the basis for a discussion of the mechanism of interaction and drawing conclusions for the practical separation of isomeric compounds.     

Simultaneous analysis of highly polar pharmaceutical adulterants in slimming products by hydrophilic interaction liquid chromatography

A chromatographic method utilizing hydrophilic interaction liquid chromatography was developed for the estimation of highly polar pharmaceutical adulterants in commercial slimming products. Five adulterants, phenylpropanolamine, salbutamol, phenformin, buformin, and metformin, were successfully separated on an XBridge^? amide column (3.5 µm, 4.6?×?250 mm) using a mobile phase composed of acetonitrile/26.5 mM ammonium formate containing 0.1% formic acid (85:15) flowing at the rate of 0.8?mL/min. Wavelengths for monitoring the elution of these compounds were determined based on the wavelength of their absorption maxima (λ_max?=?208, 226, and 236 nm). The developed method was validated for specificity, linearity, accuracy, precision, and robustness. Interassay comparison showed that the performance of the hydrophilic interaction liquid chromatography-based method was superior to that of the traditional reversed-phase liquid chromatography-based method. Therefore, the proposed method is useful to analyze highly polar pharmaceutical adulterants in slimming products.     

Extraction chromatography of common anions in liquid-liquid anion exchange systems. Part. III. Monobasic aliphatic organic acids and their sodium salts as eluants

Summary The chromatographic behaviour of anions on paper strips treated with tri-n-octylamine (TOA) salts or Aliquat 336 and developed with aqueous solutions of acetic, formic, monochloroacetic or trifluoroacetic acids and their sodium salts was investigated. Liquid-liquid extraction of organic acids by 0.1 M solution of TOA in benzene as well as the anion exchange between benzene solutions of TOA salts or Aliquat 336 (in acetate form) in benzene and aqueous solutions of sodium halides was also studied. It was found that extraction increases in the following order of the acids: CH₃COOOH<HCOOH<CH₂CICOOH<CF₃COOH; the relative affinity of organic anions to the quaternary alkyl-ammonium cation also increase in a similar order. The extraction of acid in excess over the amount necessary to neutralize the amine was observed for all four acids. The R_F values of anions investigated depend markedly on the type of organic acids or their salts and their concentration in the mobile phase. Halide ions are more strongly retained on paper treated with Aliquat 336 as compared with TOA salts. The chromatographic systems investigated offer many possibilities to separate various anion mixtures.Parts and II: refs. [1, 2].     

新型咪唑嵌合氨基亲水作用色谱固定相的制备及其色谱性能

发展新型高效的亲水作用色谱分离材料对于极性化合物的分离分析具有重要的意义。本文设计合成了一种新型咪唑嵌合的氨基亲水作用色谱固定相（Sil-IEASP）,并分别采用傅里叶变换红外光谱仪、热重分析仪和元素分析仪对该固定相进行了表征,结果表明该固定相制备成功。以核苷和核酸碱基为样品,分别考察了流动相中的水含量、盐浓度和pH对其保留的影响,结果表明所发展的固定相具有良好的亲水作用特性;此外,缓冲盐浓度和pH几乎不影响上述物质的保留。进一步将该固定相应用于分离尿嘧啶、腺嘌呤、胞嘧啶、尿苷和3种位置异构体（邻三联苯、间三联苯和苯并菲）,与常用的氨基固定相相比,本文所发展的固定相具有更好的分离效果,有望在亲水作用色谱分离领域发挥潜在的应用价值。     

Determination of the micelle-solute association constants of some benzene and naphthalene derivatives by micellar high performance liquid chromatograph

Summary The interaction of some benzene and naphthalene derivatives with sodium dodecyl sulphate, hexadecyltrimethylmmonium bromide and polyoxyethylene [23] dodecanol micelles has been evaluated by high operformance liquid chromatography using micellar mobile phases. The micelle-solute association constants have been obtained for the compounds investigated. Good correlation between free energy of transfer for water-micelles and for octanol-water has been observed.     

四元系溶液中溶质间的Gibbs自由能相互作用参数的研究

用气液色谱法测定２９８．１５Ｋ下，有机溶质在尿素＋高氯酸钠＋甲酰胺固定液中的保留参数，用ＭｃＭｉｌｌａｎ－Ｍａｙｅｒ理论，将溶液的势力学过量性质与溶液中粒子间的对相互作用、三相互作用参数相联系，用热力学方法求得该四元体系中溶质的气液色谱保留参数与Ｇｉｂｂｓ自由能相互作用参数的联系，并就溶质间的相互作用及混合溶剂性质的影响进行了讨论。     

Gas chromatographic-mass spectroscopic determination of benzene in indoor air during the use of biomass fuels in cooking time

A gas chromatography-mass spectroscopic method in electron ionization (EI) mode with MS/MS ion preparation using helium at flow rate 1 ml min(-1) as carrier gas on DB-5 capillary column (30 m x 0.25 mm i.d. film thickness 0.25 microm) has been developed for the determination of benzene in indoor air. The detection limit for benzene was 0.002 microg ml(-1) with S/N: 4 (S: 66, N: 14). The benzene concentration for cooks during cooking time in indoor kitchen using dung fuel was 114.1 microg m(-3) while it was 6.6 microg m(-3) for open type kitchen. The benzene concentration was significantly higher (p < 0.01) in indoor kitchen with respect to open type kitchen using dung fuels. The wood fuel produces 36.5 microg m(-3) of benzene in indoor kitchen. The concentration of benzene in indoor kitchen using wood fuel was significantly (p < 0.01) lower in comparison to dung fuel. This method may be helpful for environmental analytical chemist dealing with GC-MS in confirmation and quantification of benzene in environmental samples with health risk exposure assessment.     

气相色谱法制备高纯苯

研究了应用气相色谱法制备的高纯苯，并对其制备条件的选择及结果进行了讨论，结果表明：采用此法制备的苯其纯度为９９．９７％，而美国ＥＰＡ苯标准物质纯度为９９．７％《     

强极性中药组分的亲水作用色谱保留行为

采用亲水作用色谱模式,以二醇基硅胶为固定相,水-有机溶剂为流动相,通过改变流动相中有机溶剂种类及浓度、缓冲盐、有机酸种类及其浓度、柱温等条件,研究了强极性中药组分在亲水作用色谱中的保留行为。结果表明:流动相中水的比例在0～100%(V/V)变化时,溶质保留呈U型曲线,属于亲水色谱和反相色谱的混合保留机理。水含量在0～50%(V/V)范围时,亲水作用控制溶质的保留。溶质保留随流动相中缓冲盐浓度的增大而增强。对于酸性溶质,其保留随有机酸三氟乙酸、甲酸、乙酸的酸性降低而增大。     

Theoretical Study of the Benzene Dimer by the Density‐Functional‐Theory Formalism Based on Electron‐Density Partitioning

The density‐functional approach based on the partition into subsystems was applied to study the benzene dimer. For several structures, the calculated interaction energy and intermolecular distance were compared with the previous theoretical results. A good agreement with high level ab initio correlated methods was found. For instance, the interaction energies obtained in this work and the CCSD(T) method agree within 0.1 – 0.6 kcal/mol depending on the structure of the dimer. The structure with the largest interaction energy is T‐shaped, in agreement with CCSD(T) results. The T‐shaped structure of benzene dimer was suggested by several experimental measurements. The calculated interaction energy of 2.09 kcal/mol agrees also well with experimental estimates based on the dissociation energy which ranges from 1.6±0.2 to 2.4±0.4 kcal/mol and the estimated zero‐point vibration energy of 0.3 – 0.5 kcal/mol.     

The anisotropic forces acting on the bonds of benzene in liquid crystals

Abstract

The HH and CH dipolar couplings of benzene measured in five different liquid crystal solvents are subjected to an analysis which allows for the correlation between the molecular reorientational and vibrational motions. The number of adjustable parameters is reduced by treating the CH bonds or both the CH and CC bonds as effectively cylindrically symmetric entities. In this way detailed information on the anisotropic forces acting on the bonds of benzene dissolved in liquid crystals is obtained. The behaviour of the CC bonds, but not that of the CH bonds, may be explained by anisotropic dispersion forces. There is an approximately linear relation between the torques acting on the CH bonds of benzene and methane in the same liquid crystal environment. This suggests that these forces stem from a common interaction mechanism, possibly the van der Waals interaction between the atoms of the solute molecule and the liquid crystal surroundings or the interaction between the molecular quadrupole moment and the electric field gradient due to the surrounding medium. A bond additivity model for the molecular quadrupole moment tensor is developed and discussed.     

Dielectric studies on some mesogenic,non-mesogenic and organic molecules

Two important molecular parameters, namely, the dielectric relaxation time τ and electric dipole moment are highly useful in having insight into the molecular structure, size, shape, apart from the inter- and intra-molecular forces, etc. With these in view dielectric measurements in benzene at room temperature on the pure samples of o-ethyl phenol, 2-n-butylphenol, 4-n-butylphenol, 2,6-dimethoxyphenol and 3,4-difluorophenol were carried out at a frequency of 9.98 GHz by employing concentration variation method. Similar measurements, on a single weight fraction of each of them at 9.98 GHz and also at 8.74 GHz are carried out. Measurements on a single weight fraction in benzene of each of the liquid crystal samples, namely, EPCP.car (Butyl-p-(p-ethoxy phenoxy corbonyl)-phenyl carbonate), PPPB (p-pentylphenyl-p-propyl benzonate), EPAP.Hp (p-(p-ethoxyphenyl azo) phenyl heptenate) and EPAP. Und (p-(p-ethoxyphenyl azo) phenyl undecylenate were also carried out at the said two frequencies. Using the obtained values of ε′, ε′′ relaxation time and dipole moment were determined using different methods. The obtained results are compared with earlier results wherever available.     

Benzene–kaolinite interaction properties

In this work, we present a theoretical study of interaction of benzene with kaolinite and an analysis of the vibrational spectra, electrostatic potential maps, and self consistent field (SCF) orbitals. B3LYP and MP2 benzene–kaolinite results indicate a preferential interaction of benzene on kaolinite octahedral surface. Population analysis indicates that the atoms modified their charges when the monoaromatic molecule and clay mineral are close to tetrahedral and octahedral surface of kaolinite, which suggests that the adsorbed molecule becomes slightly positive. Infrared vibrational data show the reduction in the band frequencies related to the kaolinite external hydroxyls, indicating a weak interaction of benzene with clay mineral. It also was verified, from the potential electrostatic maps, a change in electron density in both benzene and kaolinite. Electron localization function analysis was also carried out for this interaction. © 2011 Wiley Periodicals, Inc.     

The intricacies of the stacking interaction in a pyrrole–pyrrole system

Extensive calculations of potential energy surfaces for parallel-displaced configurations of pyrrole–pyrrole systems have been carried out by the use of a dispersion-corrected density functional. System geometries associated with the energy minima have been found. The minimum interaction energy has been calculated as ?5.38 kcal/mol. However, bonding boundaries appeared to be relatively broad, and stacking interactions can be binding even for ring centroid distances larger than 6 Å. Though the contribution of the correlation energy to intermolecular interaction in pyrrole dimers appeared to be relatively small (around 1.6 smaller than it is in a benzene–benzene system), this system’s minimum interaction energy is lower than those calculated for benzene–benzene, benzene–pyridine and even pyridine–pyridine configurations. The calculation of the charges and energy decomposition analysis revealed that the specific charge distribution in a pyrrole molecule and its relatively high polarization are the significant source of the intermolecular interaction in pyrrole dimer systems.     

Substituent effects in the benzene dimer are due to direct interactions of the substituents with the unsubstituted benzene

The prevailing views of substituent effects in the sandwich configuration of the benzene dimer are flawed. For example, in the polar/pi model of Cozzi and co-workers (J. Am. Chem. Soc. 1992, 114, 5729), electron-withdrawing substituents enhance binding in the benzene dimer by withdrawing electron density from the pi-cloud of the substituted ring, reducing the repulsive electrostatic interaction with the nonsubstituted benzene. Conversely, electron-donating substituents donate excess electrons into the pi-system and diminish the pi-stacking interaction. We present computed interaction energies for the sandwich configuration of the benzene dimer and 24 substituted dimers, as well as sandwich complexes of substituted benzenes with perfluorobenzene. While the computed interaction energies correlate well with sigmam values for the substituents, interaction energies for related model systems demonstrate that this trend is independent of the substituted ring. Instead, the observed trends are consistent with direct electrostatic and dispersive interactions of the substituents with the unsubstituted ring.     

Evaluation of headspace-gas chromatography/mass spectrometry for the analysis of benzene in vitamin C drinks; pitfalls of headspace in benzene detection

Recently, there have been reports regarding the presence of benzene in vitamin C drinks. This is caused by sodium benzoate and ascorbic acid (vitamin C), which can react together to induce benzene formation. While the headspace gas chromatography method is well known for the detection of benzene, there could be pitfalls in the process of benzene extraction. This study was performed to check if benzene could be generated under high-temperature incubation conditions. As a result, the amount of benzene detected by headspace-gas chromatography/mass spectrometry (HSGC/MS) was affected by temperature changes. As the temperature of the sample vial was increased, newly generated benzene from the headspace also increased, causing false-positive determination of benzene. Although 80 degrees C is generally accepted for the temperature of headspace sample vials, lower temperatures, such as 40 degrees C, minimize the false-positive identification of benzene. Considering that this minimization allows benzene to be quantified at around 5 ppb, this lower temperature should definitely be considered since benzene, which is formed in sodium benzoate, can appear in vitamin C drinks under certain circumstances. The proposed analysis method of benzene in vitamin C drinks by HSGC/MS at 40 degrees C is an accurate and universal method for the monitoring of benzene without false-positive identification.