Separation and Migration Behavior of Dichlorophenols in β‐Cyclodextrin‐Modified Capillary Zone Electrophoresis

The separation and migration behavior of six isomeric dichlorophenols (DCPs) in cyclodextrin‐modified capillary zone electrophoresis (CD‐CZE) using a phosphate‐borate buffer at alkaline pH with β‐CD and hydroxypropyl‐β‐CD (HP‐β‐CD) as electrolyte modifiers were investigated. The influence of buffer pH and the concentration of β‐cyclodextrins were examined. The results indicate that baseline separation of six isomeric DCPs can be achieved with addition of β‐CD concentration in the range of 2.0‐10 mM or HP‐β‐CD concentration in the range of 4.0‐10 mM at pH 10.0. Binding constants of DCPs to β‐CDs were evaluated for a better understanding of the interaction of DCPs with β‐CDs.     

Development of a CZE method for the determination of mizolastine and its impurities in pharmaceutical preparations using response surface methodology

A fast and selective CZE method for the determination of mizolastine and related impurities is described. Response surface methodology was applied to study the influence of phosphate/triethanolamine (TEA) buffer concentration, heptakis(2,3,6-tri-O-methyl)-beta-CD (TMbetaCD) concentration, voltage and temperature. The optimum conditions were: 105 mM phosphate/TEA buffer (pH 3.0) containing 10 mM TMbetaCD, temperature 19 degrees C and voltage 30 kV. Validation of the method was performed in drug substance and drug product. Robustness was evaluated using a Plackett-Burman design, including pH among the considered factors. Applying the optimal conditions, the nine peaks were baseline separated in about 10 min. The method was applied to the quality control of mizolastine in controlled-release tablets.     

Cyclodextrin-assisted capillary electrophoretic resolution of 1,1'-bi-2-naphthol atropisomers.

Native beta- and gamma-cyclodextrin (CD), neutral beta-CD derivatives and ethylcarbonate derivatives of beta- and gamma-CD were used as stereoselective additives for CD-capillary zone electrophoresis (CZE) resolution of atropisomers of 1,1'-bi-(2-naphthol) (BN). CZE experiments at variable CD concentration allowed calculating binding constants from electrophoretic mobility data, corrected for electroosmotic flow (EOF) and running buffer viscosity variations. The CDs were chosen on the basis of geometric examination of molecular models of BN and CDs that suggested the possibility of inclusion complexes formation. Optimum concentrations, with aqueous 25 mM phosphate running buffer at pH 10.5, 36 cm x 50 microm capillary and 10 kV applied potential, were 3.6, 3.9, 2.1, 2.2, 1.9 mM for beta-CD, gamma-CD, ethylcarbonate-beta-CD, methyl-beta-CD and hydroxypropyl-beta-CD, respectively.     

Simultaneous determination of inorganic anions, carboxylic and aromatic carboxylic acids by capillary zone electrophoresis with direct UV detection

Co-electroosmotic capillary zone electrophoresis (CZE) with direct UV detection was developed for simultaneous determination of inorganic anions, carboxylic and aromatic carboxylic acids. These solutes were separated using a 30 mM phosphate buffer containing 1.0 mM tetradecyltrimethylammonium bromide (TTAB) and 20% (v/v) acetonitrile at pH of 6.5 and directly detected by UV at 190 nm. Calibration curves were linear in the range 0.01-2.0 mM, depending of the solutes. The detection limits ranged from 1.0 to 8.0 microM and the relative standards deviations (n=5) in range from 1.9 to 3.6% for the peak area. The proposed method was used to determine inorganic anions and carboxylic and aromatic acids in soil and plant tissue extracts.     

A capillary zone electrophoresis for determination of thiolic peptides in biological samples

A new method to improve the analyses of thiolic peptides (cysteine, γGlu-Cys, glutathione, phytochelatins and desglycyl-phytochelatins) derivatized with monobromobimane (mBrB) in complex biological samples by CZE is described. The method involves a SPE using Sep-Pak Light C18 Cartridges after derivatization and a later CZE analysis. Elution of mBrB-thiols was achieved with 10 mM HCl + 70% methanol v/v in deionised water. Electrophoretic parameters, such as BGE pH and concentration, different organic additives (methanol and trifluoroethanol), applied voltage and capillary length were studied in order to establish suitable analytical conditions. Optimum separation of the mBrB-thiolic peptides was obtained with 100 mM sodium borate buffer at pH 7.60. The electrophoretic conditions were +15 kV, capillary length of 90 cm from inlet to detector (98 cm total length, 50 μm ID), samples were loaded into the capillary by hydrodynamic injection (50 mbar, 20 s) and detection was performed at 390 nm. The improved method showed good reproducibility, linearity and sensitivity. The LODs and LOQs estimated using a standard of GSH were 1.41 and 4.69 μM respectively.     

Characterization of the stereoselective metabolism of thiopental and its metabolite pentobarbital via analysis of their enantiomers in human plasma by capillary electrophoresis.

Using capillary zone electrophoresis (CZE) with a 75 mM phosphate buffer at pH 8.5 containing 5 mM hydroxypropyl-gamma-cyclodextrin (OHP-gamma-CD) as chiral selector, the separation of the enantiomers of thiopental and its oxybarbiturate metabolite, pentobarbital, is reported. Enantiomer assignment was performed via preparation of enantiomerically enriched fractions using chiral recycling isotachophoresis (rITP) processing of racemic barbiturates and analysis of rITP fractions by chiral CZE and circular dichroism spectroscopy. Thiopental and pentobarbital enantiomers in plasma were extracted at low pH using dichloromethane and extracts were reconstituted in acetonitrile or 10-fold diluted, achiral running buffer. The stereoselectivity of the thiopental and pentobarbital metabolism was assessed via analysis of 12 plasma samples that stemmed from patients undergoing prolonged or having completed long-term racemic thiopental infusion. The data obtained revealed a modest stereoselectivity with R-(+)-thiopental/S-(-)-thiopental and R-(+)-pentobarbital/S-(-)-pentobarbital plasma ratios being < 1 (P < 0.05 compared to data obtained with racemic controls) and > 1 (P < 0.001), respectively. The total S-(-)-thiopental plasma concentration was found to be on average about 24% higher compared to the concentration of R-(+)-thiopental, whereas the total R-(+)-pentobarbital plasma level was observed to be on average 29% higher compared to the S-(-)-pentobarbital concentration.     

Determination of berberine and strychnine in medicinal plants and herbal preparations by pressurized liquid extraction with capillary zone electrophoresis.

A simple and rapid method for the determination of berberine and strychnine in medicinal plants and herbal preparations for regulatory purposes using a home-made pressurized liquid extraction (PLE) system with capillary zone electrophoresis (CZE) using ultraviolet detection at 254 nm was developed. The effects of pH, concentration of buffer, and organic modifiers in the electrophoretic separation were investigated. The buffer used for CZE contained 50 mM ammonium acetate, pH 3.1. The effect of temperature on the extraction efficiency of strychnine in medicinal plants by PLE was demonstrated. Comparable or higher extraction efficiency was achieved with PLE for strychnine in medicinal plants and berberine in herbal preparations compared to soxhlet extraction. The effect of matrix interference in medicinal plants and herbal preparations containing a number of medicinal plants samples using CZE was investigated by standard additional experiments. The reproducibility of the method using PLE with CZE was found to vary between 2.4 and 10.7% (n = 5/6) for different types of samples on different days.     

Enantiomeric separation of citalopram and its metabolites by capillary electrophoresis

A simple and fast capillary electrophoretic method has been developed for the enantioselective separation of citalopram and its main metabolites, namely N-desmethylcitalopram and N,N-didesmethylcitalopram, using beta-cyclodextrin (beta-CD) sulfate as the chiral selector. For method optimisation several parameters were investigated, such as CD and buffer concentration, buffer pH, and capillary temperature. Baseline enantioseparation of the racemic compounds was achieved in less than 6 min using a fused-silica capillary, filled with a background electrolyte consisting of a 35 mM phosphate buffer at pH 2.5 supplemented with 1% w/v beta-CD sulfate and 0.05% w/v beta-CD at 25 degrees C and applying a voltage of -20 kV. A fast separation method for citalopram was also optimized and applied to the analysis of pharmaceutical formulations. Racemic citalopram was resolved in its enantiomers in less than 1.5 min using short-end injection (8.5 cm, effective length) running the experiments in a background electrolyte composed of a 25 mM citrate buffer at pH 5.5 and 0.04% w/v beta-CD sulfate at a temperature of 10 degrees C.     

Investigation of folic acid stability in fortified instant noodles by use of capillary electrophoresis and reversed-phase high performance liquid chromatography

A single enzyme treatment with alpha-amylase, prior to the quantification of added folic acid (FA) in fortified instant fried Asian noodles with analysis performed by capillary zone electrophoresis (CZE) and reversed-phase high performance liquid chromatography (RP-HPLC) with UV detection, is described. The method was validated and optimized for capillary electrophoresis (CE) with separation achieved using a 8 mM phosphate-12 mM borate run buffer with 5% MeOH at pH 9.5. FA was well separated from matrix components with nicotinic acid (NA) employed as an internal standard. In a comparative study, separation of FA was performed using HPLC with a mobile phase consisting of 27% MeOH (v/v) in aqueous potassium phosphate buffer (3.5 mM KH(2)PO(4) and 3.2 mM K(2)HPO(4)), pH 8.5, and containing 5 mM tetrabutylammonium dihydrogen phosphate as an ion-pairing agent. For both methods, excellent results were obtained for various analytical parameters including linearity, accuracy and precision. The limit of detection was calculated to be 2.2 mg/L for CE without sample stacking and 0.10 mg/L with high performance liquid chromatography (HPLC). Sample extraction involved homogenization and enzymatic extraction with alpha-amylase. Results indicated that FA was stable during four main stages of instant fried noodle manufacturing (dough crumbs, cut sheets, steaming and frying).     

Chiral separation of four fluoroquinolone compounds using capillary electrophoresis with hydroxypropyl-beta-cyclodextrin as chiral selector

A capillary zone electrophoresis (CZE) investigation on the enantiomeric separation of lomefloxacin, gatifloxacin, pazufloxacin and ofloxacin was undertaken. Resolution of the enantiomers was achieved using hydroxypropyl-beta-cyclodextrin (HP-beta-CD) as the chiral selector. Parameters influencing separation include cyclodextrin concentration, separational potential, pH and organic additive are discussed. A buffer consisting of 70 mM phosphate and 40 mM HP-beta-CD at pH 3.96 was found to be highly efficient for the separation of lomefloxacin, at pH 3.90 for gatifloxacin, at pH 5.04 for pazufloxacin and at pH 2.16 for ofloxacin. To the best of our knowledge, this is the first report on the enantiomeric resolution of lomefloxacin and gatifloxacin applying CE.     

Comparative study for separation of aquatic humic substances by capillary zone electrophoresis using uncoated, polymer coated and gel-filled capillaries

Several comparative capillary zone electrophoresis (CZE) experiments were carried out by means of uncoated, polyvinyl alcohol (PVA) and polyacrylamide (PAA) coated silica open tubular capillaries and gel-filled capillaries (linear non-cross-linked polyacrylamide, PAGE, by a pre-coated PAA capillary) using different kinds of background electrolytes (BGEs) and organic modifiers for characterization of aquatic dissolved humic matter (DHM). Organic compounds, such as acetic acid, acetate buffer, methanol, ethylene glycol, acetonitrile, dimethylsulphoxide, 5 M urea and sodium dodecyl sulphate (SDS) were tested as sample modifiers to improve the separative power. The fractionation mode by a PVA coated open tubular capillary using 40 mM phosphate buffer at pH 6.8 and 5 M urea-water as the sample modifier turned out to be fairly practical as well as its PAA homologue. Linear non-cross-linked PAGE with 10% gel concentration and 5 M urea-water as the sample modifier using 40 mM phosphate buffer at pH 6.8 produced the most reliable results as to the adaptation of physical gels, especially if the interactions of humic solutes with the gel matrix are not critical. The addition of SDS in the linear PAGE gel increased the interaction of humic solutes with the gel matrix but also improved the separative power and strengthened the chaotropic effect of the urea modifier.     

On-line coupling of capillary isotachophoresis and capillary zone electrophoresis for the determination of flavonoids in methanolic extracts of Hypericum perforatum leaves or flowers

Five flavonoids (hyperoside, isoquercitrin, quercitrin, quercetin and rutin) were separated and determined in extracts of Hypericum perforatum leaves or flowers by capillary zone electrophoresis (CZE) with isotachophoretic (ITP) sample pre-treatment using on-line column coupling configuration. The background electrolyte (BGE) used in the CZE step was different from the leading and terminating ITP electrolytes but all the electrolytes contained 20% (v/v) of methanol. The optimal leading electrolyte was 10 mM HCl of pH* approximately 7.2 (adjusted with Tris) and the terminating electrolyte was 50 mM H3BO3 of pH* approximately 8.2 (adjusted with barium hydroxide). This operational system allowed to concentrate and pre-separate selectively the flavonoid fraction from other plant constituents before the introduction of the flavonoids into the CZE capillary. The BGE for the CZE step was 50 mM Tris buffer of pH* approximately 8.75 containing 25 mM N-[tris(hydroxymethyl)methyl]-3-aminopropanesulfonic acid as co-ion and 55 mM H3BO3 as complex-forming agent. The ITP-CZE method with spectrophotometric detection at 254 nm was suitable for the quantitation of the flavonoids in real natural samples; kaempferol was used as internal standard. The limit of detection for quercetin-3-O-glycosides was 100 ng ml(-1) and calibration curves were rectilinear in the range 1-10 microg ml (-1) for most of the analytes. The RSD values ranged between 0.9 and 2.7% (n=3) when determining approximately 0.07-1.2% of the individual flavonoids in dried medicinal plants.     

Capillary zone electrophoresis of soil humic acid fractions obtained by coupling size-exclusion chromatography and polyacrylamide gel electrophoresis

Capillary zone electrophoresis (CZE) was used for characterisation of soil humic acid (HA) fractions obtained by coupling size-exclusion chromatography with polyacrylamide gel electrophoresis, on the basis of their molecular size and electrophoretic mobility. CZE was conducted using several low alkaline buffers as background electrolyte (BGE): 50 mM carbonate, pH 9.0; 50 mM phosphate, pH 8.5; 50 mM borate, pH 8.3; 50 mM Tris-borate+1 mM EDTA+7 M urea+0.1% sodium dodecyl sulphate (SDS), pH 8.3. Independently of BGE conditions, the effective electrophoretic mobility of HA fractions were in good agreement with their molecular size. The better resolution of HA were obtained in Tris-borate-EDTA buffer with urea and SDS. This results indicated that CZE, mostly with BGE-contained disaggregating agents, is useful for separating HAs in fractions with different molecular sizes.     

Simultaneous determination of cimetidine, famotidine, nizatidine, and ranitidine in tablets by capillary zone electrophoresis.

A simple capillary zone electrophoresis (CZE) method is described for the simultaneous determination of cimetidine (CIM), famotidine (FAM), nizatidine (NIZ), and ranitidine (RAN). The analysis of these drugs was performed in a 100 mM phosphate buffer, pH 3.5. Several parameters were studied, including wavelength for detection, concentration and pH of phosphate buffer, and separation voltage. The quantitative ranges were 100-1,000 microM for each analyte. The intra- and interday relative standard deviations (n = 5) were all less than 4%. The detection limits were found to be about 10 microM for CIM, 20 microM for RAN, 20 microM for NIZ, and 10 microM for FAM (S/N = 3, injection 1 s) at 214 nm. All recoveries were greater than 92%. Applications of the method to the assay of these drugs in tablets proved to be feasible.     

Iron protoporphyrin-modified monolithic support for on-line preconcentration of angiotensin prior to CE analysis

An on-line preconcentration method using a polymeric monolithic support is proposed for the retention of the decapeptide angiotensin I and its subsequent analysis by CZE. Monolithic capillary columns were prepared in fused-silica (FS) capillaries of 150 microm id by ionizing radiation-initiated in situ polymerization and cross-linking of diethylene glycol dimethacrylate and glycidyl methacrylate, and chemically modified with iron protoporphyrin IX (Fe-ProP). Monolithic microcolumns (8 mm long) were coupled on-line to the inlet of the separation capillary (FS capillary, 75 microm id x10 cm from the inlet to the microcolumn and 27 cm from the microcolumn to the detector). Angiotensin I was released from the sorbent by a 50 mM sodium phosphate, pH 2.5/ACN, 75:25 v/v solution and then analyzed by CZE with UV absorption detection at 214 nm. The concentration LOQ (CLOQ) was 0.5 ng/mL. The Fe-ProP-derivatized monolithic microcolumn coupled to the separation capillary exhibited a high retention capacity for peptide angiotensin I, and showed as much as 10,000-fold improvement in concentration sensitivity.     

A capillary zone electrophoresis method for determining N-acetylneuraminic acid in glycoproteins and blood sera

A simple capillary zone electrophoresis (CZE) method for the determination of the content of the major sialic acid form N-acetylneuraminic acid (Neu5Ac) in glycoproteins was established. The present method utilizes a simplified hydrolysis-purification procedure consisting of mild acid hydrolysis (25 mM trifluoroacetic acid for 2h at 80 degrees C) to release Neu5Ac and ultrafiltration on Centricon-3 membrane to remove the obtained asialoglycoproteins and other macromolecules present in biologic samples. Derivatization with benzoic anhydride at 80 degrees C for 20 min resulted in complete conversion of Neu5Ac to per-O-benzoylated Neu5Ac. CZE analysis was performed using the operating buffer 25mM phosphate, pH 3.5, containing 50% (v/v) acetonitrile as organic modifier at 30 kV, and detection of the per-O-benzoylated Neu5Ac at 231 nm. The method showed excellent repeatability (RDS<1.98%) and a linearity range from 5 microg/mL to 5mg/mL with a detection limit of 2 microM. Application of the method to microanalysis of human alpha(1)-acid glycoprotein and blood serum samples showed excellent agreement with previously published values, suggesting a high precision for the developed CZE method.     

The use of a highly sulfated cyclodextrin for the simultaneous chiral separation of amphetamine-type stimulants by capillary electrophoresis

We investigated the simultaneous chiral separation of nine amphetamine type stimulants (dl-norephedrine, dl-norpseudoephedrine, dl-ephedrine, dl-pseudoephedrine, dl-amphetamine, dl-methamphetamine, dl-methylenedioxyamphetamine (MDA), dl-methylenedioxymethamphetamine (MDMA), and dl-methylenedioxyethylamphetamine (MDEA)) by capillary electrophoresis using highly sulfated gamma-cyclodextrin (SU(XIII)-gamma-CD) as a chiral selector. Three different approaches using SU(XIII)-gamma-CD with 50 mM phosphate background electrolyte were designed; (I) high CD concentration (10 mM SU(XIII)-gamma-CD) at neutral pH (pH 7.0) in the normal polarity mode, (II) low CD concentration (1.0 mM) at low pH (pH 2.6) in the normal polarity mode and (III) high CD concentration at low pH (pH 2.6) in the reversed-polarity mode. In mode (II), the effects of adding three neutral CDs (beta-CD, dimethyl-beta-CD and hydroxypropyl-beta-CD) were also investigated. The best separation was obtained after optimizing mode (III) as follows: run buffer of 10 mM SU(XIII)-gamma-CD with 50 mM phosphate background electrolyte at pH 2.6, applied voltage of -12 kV and capillary temperature of 15 degrees C.     

Determination of muscimol and ibotenic acid in mushrooms of Amanitaceae by capillary electrophoresis

In this study, the CZE method for rapid quantitative and qualitative determination of ibotenic acid and muscimol in Amanita mushrooms naturally grown in Poland was developed. The investigations included the species of A. muscaria, A. pantherina, and A. citrina, collected in southern region of Poland. The studied hallucinogenic compounds were effectively extracted with a mixture of methanol and 1 mM sodium phosphate buffer at pH 3 (1:1 v/v) using ultrasound‐assisted procedure. The obtained extracts were separated and determined by CZE utilizing a 25 mM sodium phosphate running buffer adjusted to pH 3 with 5% content of acetonitrile v/v. The calibration curves for both analytes were linear in the range of 2.5–7000 μg/mL. The intraday and interday variations of quantitative data were 1.0 and 2.5% RSD, respectively. The recovery values of analyzed compounds were over 87%. The identities of ibotenic acid and muscimol were confirmed by UV spectra, migration time, and measurements after addition of external standard.     

Validation of capillary zone electrophoresis and capillary isoelectric focusing separations optimized for the characterization of two recombinant products of the birch pollen allergen Bet v 1a

CZE and CIEF separation systems, both developed previously for a quality control of two recombinant products of the major birch pollen allergen Bet v 1a of Betula verrucosa, were validated including aspects of the International Conference on Harmonization. One product contained carbamylated variants as impurities. Linearity of response was confirmed by Mandel's fitting test between 0.028 and 1.90 mg/mL for CZE and between 0.016 and 0.26 mg/mL for CIEF. Repeatability and intermediate precision were evaluated for the effective mobility (mu(eff)) in CZE, for relative mobilization time in CIEF and the peak area ratio of Bet v 1a. LOQ for Bet v 1a was between 10 and 23 microg/mL for both methods. Evaluation of robustness for CZE revealed susceptibility of micro(eff) of Bet v 1a to alterations in of buffer pH and separation temperature. Selectivity was impaired by an increase in temperature, pH, and buffer concentration. In addition, pH variations influenced the separation profile of impurities. For CIEF, the ratio of narrow pH range carrier ampholytes is the critical parameter to retain robustness. Results demonstrate the suitability of both separation systems to discriminate between nonmodified Bet v 1a and carbamylated variants in the selected recombinant allergen products.     

Migration mechanism of bases and nucleosides in oil-in-water microemulsion capillary electrophoresis.

The electrophoretic behaviors of five bases and corresponding nucleosides in the oil in water (o/w) microemulsion capillary electrophoresis, microemulsion electrokinetic chromatography (MEEKC), were examined in comparison with those in normal capillary zone electrophoresis (CZE). The microemulsion systems were composed of heptane, sodium dodecyl sulfate (SDS), 1-butanol and 10 mM phosphate buffer (pH 7.0) or toluene, SDS, 1-butanol and 5 mM carbonate buffer (pH 10.0). CZE was carried out in the range of pH 9.7-10.9, and the dissociation constants, pKa, of the bases and nucleosides and the electrophoretic mobilities of the anionic forms were determined. The electrophoretic behaviors of the solutes in the microemulsion systems were analyzed from their pKa, the electrophoretic mobilities of the anions determined by CZE, and the distribution constants, K(D), of the neutral forms between the microemulsion droplets and the outer aqueous phase. The importance of adsorption mechanism in MEEKC system was suggested from the correlation between log K(D) and log P.