侧基甲壳效应和甲壳型液晶高分子

侧链液晶高分子体系里,液晶基元可以通过尾接或腰接的方式与主链相连.一般认为,在液晶基元与主链间插入一段长度合适的＂柔性间隔基＂可有效实现主、侧链间的动力学去偶合,从而有利于侧基液晶基元之间的有序排列.作为一类特殊的腰接型侧链液晶高分子,甲壳型液晶高分子中体积较大的侧基（如棒状液晶基元）通过非常短的间隔基或仅通过一个碳-碳键直接横挂至主链上,这导致了强烈的甲壳效应,使得主链被迫伸展.因此,可从与＂柔性间隔基＂完全不同的角度出发,充分利用主链和侧基间的偶合作用,设计甲壳型液晶高分子.本文综述了腰接型侧链液晶高分子中的侧基甲壳效应、甲壳型液晶高分子中由主链与侧基相互作用所导致的特殊构象以及液晶相结构.研究表明,侧基甲壳效应在调控甲壳型液晶高分子的形状、尺寸以及螺旋结构等方面有重要作用.甲壳型液晶高分子可作为刚-柔嵌段共聚物的刚性链段,也可作为主/侧链结合型液晶高分子的主链部分参与到多层次分级超分子有序结构的构筑之中.     

一类新的刚性链侧链型液晶高分子的合成

以自由基聚合方法，合成了一系列含有三个苯环通过酯键相联的液晶性单体及其聚合物．在这类新的液晶高分子中，刚性液晶基元不通过柔性间隔基而直接竖挂在聚甲基丙烯酸酯大分子主链上．这些高分子有很高的玻璃化转变温度，表明其分子链刚性较大，因而代表了一类新的刚性链侧链型液晶高分子．它们的液晶行为用ＤＳＣ、偏光显微镜和Ｘ－光衍射进行了表征．发现所有单体和聚合物均为向列型热致性液晶．     

不同主链"甲壳型"高分子的合成及其液晶性研究

"甲壳型"液晶高分子(MJLCP)的概念是周其凤等[1]在1987年首次提出的,随后分别被文献[2～8]所证实.由于液晶基元对空间的要求,液晶高分子主链采取尽可能伸展的构象.虽然它们在化学结构上属于侧链型,但在分子形态上更接近于主链型液晶高分子,但至今尚不清楚其产生液晶性的原因.     

新型侧链液晶聚甲基丙烯酸酯研究

以横向取代的液晶基元为侧基合成了聚甲基丙烯酸酯,并对此聚合物进行初步表征.在玻璃化温度(170℃)以上样品进入液晶态.样品较高的玻璃化温度以及能形成液晶态的特性被认为是棒状液晶基元使聚合物分子链刚性化的结果.     

刚性链侧链型液晶高分子合成与研究

以自由基聚合方法，合成了一系列含有３个苯环通过酯键相联的液晶性单体及其聚合物，这类刚性液晶基元不通过柔性间隔基而直接竖挂在聚丙烯酸酯大分子主链上，具有很高的Ｔｇ·ＤＳＣ及偏光显微镜结果表明，所有的单体和聚合物均为向列型热致性液晶。     

甲壳型液晶高分子的化学结构及其与性能间关系的研究

设计并合成了7种新型甲壳型液晶高分子,研究了液晶基元的化学结构和立体效应对单体及其聚合物液晶性的影响.发现在液晶基元的末端引入极性或可极化的原子基团提高了单体的熔点和液晶相的热稳定性;液晶基元的长径比越大,单体的熔点和清亮点越高;聚合使单体的液晶稳定性增加、液晶相温度范围变宽;侧链液晶基元的极性、刚性和空阻越大,聚合物的玻璃化温度越高;酰胺基团无论是在分子的末端还是在连接部位,都使单体的熔点和聚合物的玻璃化温度提高,但在分子末端时液晶相较稳定,作为中心桥键时不利于液晶相的稳定形成.     

一种新型侧链液晶聚合物的喇曼光谱研究

根据传统的侧链型液晶聚合物理论,在液晶基元和主链之间必须有柔性链相连。最近我们设计并合成了单体为2,3-双(对烷氧基苯甲酰氧基)苯乙烯的侧链液晶聚合物,该聚合物突破了文献[1]的理论,把液晶基元从重心位置横挂于主链之上,其间无柔性链段,只以单键相接。我们用喇曼光谱研究了该新型侧链液晶聚合物,表明它存在上述结构特点。     

主链具有X-型液晶基元的液晶高分子系列的合成与研究

以低温溶液缩聚方法,合成了一系列主链上具有X-型液晶基元的液晶高分子。所有聚合物样品均具有明显的热致液晶性。不同柔性链段长度和取代基对聚合物的液晶性呈规律性的影响。并用IR、H-NMR、WAXD和热台偏光显微镜等方法对聚合物进行了表征。     

刚性链侧链型液晶高分子（甲壳型液晶高分子）研究进展

普通的侧链型液晶高分子属柔性链高分子,而“甲壳型液晶高分子”虽从化学结构着属于侧链型液晶高分子,其性质却和典型的眩链型液晶高分子相似,具有很大的分子链刚性。本文介绍了“甲型液晶高分子”这一科学概念及其研究进展,并对尚待解决的问题进行了探讨。     

含联苯结构侧链液晶聚合物的合成及相行为的研究

液晶聚合物从结构上可分为3种:侧链型、主链型和主侧链型。侧链型液晶聚合物主要是聚丙烯酸酯类、聚硅氧烷类以及磷腈聚合物类。Gray等对聚丙烯酸酯类含不同取代基的联苯结构液晶聚合物进行了研究,结果表明无间隔基且取代基为氰基和饱和脂肪基时,该聚合物呈现近晶型液晶行为。为了增加介晶单元的长径比及刚性,本文在聚甲基丙烯酸酯侧链     

Poly(1,3,4-oxadiazole-ether-imide)s and their polydimethylsiloxane-containing copolymers

Poly(1,3,4-oxadiazole-ether-imide)s were prepared by thermal imidization of poly(amic-acid) intermediates resulting from the solution polycondensation reaction of a bis(ether-anhydride), namely 2,2′-bis-[(3,4-dicarboxyphenoxy)phenyl]-1,4-phenylenediisopropylidene dianhydride, with different aromatic diamines containing 1,3,4-oxadiazole ring, such as 2,5-bis(p-aminophenyl)-1,3,4-oxadiazole, 2,5-bis[p-(4-aminophenoxy)phenyl]-1,3,4-oxadiazole, 2-(4-dimethylaminophenyl)-5-(3,5-diaminophenyl)-1,3,4-oxadiazole. Poly(1,3,4-oxadiazole-ether-imide)-polydimethylsiloxane copolymers were prepared by polycondensation reaction of the same bis(ether-anhydride) with equimolar quantities of an aromatic diamine having 1,3,4-oxadiazole ring and a bis(aminopropyl)polydimethylsiloxane oligomer of controlled molecular weight. A solution imidization procedure was used to convert quantitatively the poly(amic-acid) intermediates to the corresponding polyimides. All the polymers were easily soluble in polar organic solvents such as N-methylpyrrolidone and N,N-dimethylacetamide. The polymers showed good thermal stability with decomposition temperature being above 400 °C. Solutions of some polymers in N-methylpyrrolidone exhibited blue fluorescence, having maximum emission wavelength in the range of 370-412 nm.     

Thermal stability and degradation behavior of novel wholly aromatic azopolyamide-hydrazides

Thermal stability and degradation behavior of a series of novel wholly aromatic polyamide-hydrazides containing azo groups in their main chains have been investigated in nitrogen and in air atmospheres using differential scanning calorimetry (DSC), thermogravimetry (TG), infrared spectroscopy (IR) and elemental analysis. The influences of controlled structural variations and molecular weight on the thermal stability and degradation behavior of this series of polymers have also been studied. The structural differences were achieved by varying the content of para- and meta-substituted phenylene rings incorporated within this series. Azopolyamide-hydrazides having different molecular weights of all para-substituted phenylene type units were also examined. The polymers were prepared by a low temperature solution polycondensation reaction of p-aminosalicylic acid hydrazide [PASH] and an equimolar amount of 4,4′-azodibenzoyl chloride [4,4′ADBC] or 3,3′-azodibenzoyl chloride [3,3′ADBC] or mixtures of various molar ratios of 4,4′ADBC and 3,3′ADBC in anhydrous N,N-dimethyl acetamide [DMAc] containing lithium chloride as a solvent at −10 °C. All the polymers have the same structural formula except the mode of linking phenylene units in the polymer chain. The results clearly reveal that these polymers are characterized by high thermal stability. Their weight loss occurred in three distinctive steps. The first was small and assigned to the evaporation of absorbed moisture. The second was appreciable and was attributed to the cyclodehydration reaction of the hydrazide groups into 1,3,4-oxadiazole rings by losing water, combined with elimination of azo groups by losing molecular nitrogen. This is not a true degradation but rather a thermo-chemical transformation reaction of the azopolyamide-hydrazides into the corresponding polyamide-1,3,4-oxadiazoles. The third was relatively severe and sharp, particularly in air, and corresponded to the decomposition of the resulting polyamide-1,3,4-oxadizoles. In both degradation atmospheres, the improved resistance to high temperatures was always associated with increased content of para-phenylene moieties of the investigated polymer. The better thermal stability of the wholly para-oriented type of polymer relative to the other polymers is attributed to its greater chain symmetry which is responsible for its greater close packing, rod-like structure and consequently stronger intermolecular bonds which would be more difficult to break and therefore more resistance to high temperatures. Further, with exception of 160-200 °C temperature range, where the lower molecular weight samples showed considerable weight losses which were most probably due to hydrogen bonded DMAc, all the wholly para-oriented phenylene type of polymer samples behaved similarly regardless of their respective molecular weight. This seems to indicate that the structural building units responsible for high thermal stability of the polymers are their characteristic groups, such as aromatic moieties, amide and hydrazide linkages in case of azopolyamide-hydrazides, and 1,3,4-oxadiazole rings, aromatic nuclei and amide linking bonds in case of polyamide-1,3,4-oxadiazoles, rather than the longer chain segments.     

Arylidene Polymers. XVII. Cyclization of Aromatic Poly[dibenzylidenecyclopentanone-Hydrazide] as a Route to Polyheterocyclic 1,3,4-Oxadiazole and 1,2,4-Triazole

A new interesting class of thermal stable arylidene polymers containing 1,3,4-oxadiazole and 1,2,4-triazole moieties in the main chain have been synthesized from aromatic polyhydrazide I. Cyclization of I at 250°C in the absence of solvent was found to be the best pathway for the inclusion of the 1,3,4-oxadiazole moiety in the main chain. Heating of I with aniline, cyclohexyl amine, or 3-amino pyridine at 180°C for 30 h gave the corresponding 1,2,4-triazole polymers III. The introducing effect of different aromatic, cycloalkyl, and heterocyclic amines in III_a-c and IV_a-c on thermal stability behavior was studied by TGA analysis. Moreover, all the polymers were characterized by elemental and spectral analyses, solubility, and viscometry measurements. X-ray diffractograms of the synthesized polymers showed they had less crystallinity than the polyhydrazide precursors.     

Poly(1,3,4-oxadiazole-amide)s containing pendent imide groups

A series of new poly(1,3,4-oxadiazole-amide)s containing pendent imide groups has been synthesized by solution polycondensation of aromatic diamines containing preformed 1,3,4-oxadiazole rings with two diacid chlorides containing imide rings. These polymers were also prepared by the reaction of the same diacid chlorides with p-aminobenzhydrazide which were subsequently cyclodehydrated in solid state. The polymers were soluble in polar amidic solvents and some of them gave transparent flexible films by casting from solutions. They showed high thermal stability with decomposition temperatures above 400°C and glass transition temperatures in the range of 245–327°C. They had low dielectric constants, in the range of 3.32–3.94, and good tensile properties.     

Poly(1,3,4-oxadiazole-imide)s containing dimethylsilane groups

New poly(1,3,4-oxadiazole-imide)s containing dimethylsilane units have been prepared by solution polycondensation reaction of an aromatic dianhydride incorporating dimethylsilane group, namely bis(3,4-dicarboxyphenyl)dimethylsilane dianhydride, with different aromatic diamines having preformed 1,3,4-oxadiazole ring, such as 2,5-bis(p-aminophenyl)-1,3,4-oxadiazole, 2,5-bis[p-(4-aminophenoxy)phenyl]-1,3,4-oxadiazole, 2,5-bis[p-(3-aminophenoxy)phenyl]-1,3,4-oxadiazole, 2-(4-fluorophenyl)-5-(3,5-diaminophenyl)-1,3,4-oxadiazole, and 2-(4-dimethylaminophenyl)-5-(3,5-diaminophenyl)-1,3,4-oxadiazole. The polymers were easily soluble in polar organic solvents, such as N-methylpyrrolidinone, N,N-dimethylformamide, and pyridine, as well as in less polar organic solvents, such as tetrahydrofuran and chloroform. Very thin coatings deposited on silicon wafers exhibited smooth, pinhole-free surface in atomic force microscopy investigations. The polymers showed high thermal stability with decomposition temperature being above 415 °C.They exhibited a glass transition in the temperature range of 202-282 °C, with reasonable interval between glass transition and decomposition temperature. Solutions of the polymers in N,N-dimethylformamide exhibited fluorescence, having maximum emission wavelength in the range of 353-428 nm.     

Polyhydrazides. IV. Preparation and properties of poly-N-ethyl- and isopropylhydrazide oxadiazoles

High molecular weight poly-N-alkylhydrazide-oxadiazoles have been prepared in poly-phosphoric acid by alkylation of poly-1,3,4-oxadiazole which was synthesized from terephthalic acid and hydrazine sulfate. Various kinds of reagents having an alkoxy group were used as alkylating agent, and N-ethylated and N-propylated polyhydrazides containing oxadiazole units were obtained. The thermal properties of the polymers obtained were investigated by using infrared spectroscopy, viscometry, differential thermometric and thermogravimetric techniques. Soluble poly-N-alkylhydrazide-oxadiazole are thermally cyclized to poly-1,3,4-oxadiazole with elimination of olefins and water at 226–330°C for propylated polydrazide and at 240–360°C for ethylated polyhydrazide. For both, weight loss in polyhydrazides occurs in two distinct stages corresponding, respectively, to cyclization and decomposition of the poly-1,3,4-oxadiazole formed in situ.     

Polyhydrazides. III. N-methylated polyhydrazides by ring-opening of poly-p-phenylene-1,3,4-oxadiazole

A new ring-opening reaction of 1,3,4-oxadiazole by methylating reagents was developed in fuming sulfuric acid or polyphosphoric acid and then, by applying this reaction to poly-p-phenylene-1,3,4-oxadiazole, a high molecular weight poly-N-methylterephthalylhydrazide was obtained. Various methylating reagents were investigated as ring-opening reagents. The degrees of ring-opening in polymers were estimated and related to the properties of the polymers.     

Synthesis and properties of carbon-chain polymers with pendant 1,3,4-oxadiazole rings

Carbon-chain polymers with 1,3,4-oxadiazole rings were prepared by radical polymerization and polymer-analogous transformations. The kinetic relationships of the polymerization of vinyl-1,3,4-oxadiazole monomers and some properties of the resulting polymers were studied. The thermodynamics of interaction of poly-2-vinyl-5-methyl-1,3,4-oxadiazole, a nonionic water-soluble polymer, with water was examined.     

Synthesis of poly(1,3,4-oxadiazole)s by direct polycondensation of dicarboxylic acids with hydrazine sulfate using phosphorus pentoxide/methanesulfonic acid as condensing agent and solvent

A convenient method for the synthesis of poly(1,3,4-oxadiazole)s of high molecular weights has been developed. These polymers were prepared readily by the direct polycondensation of dicarboxylic acids with hydrazine sulfate ( 1 ) using phosphorus pentoxide/methanesulfonic acid (PPMA) as both a condensing agent and solvent. Polycondensation of aliphatic dicarboxylic acids with 1 proceeded even at room temperature and produced poly(1,3,4-oxadiazole)s with inherent viscosities up to 1.4 dL/g. The synthesis of aromatic poly(1,3,4-oxadiazole)s from aromatic dicarboxylic acids containing phenyl ether structures was carried out by a one-pot procedure because the preactivation of dicarboxylic acids was required. The synthesis of 2,5-disubstituted-1,3,4-oxadiazoles by the reaction of carboxylic acids with 1 in PPMA was studied to demonstrate the feasibility of the reaction for polymer formation. The thermogravimetry of the aromatic poly(1,3,4-oxadiazole)s showed 10% weight loss both in air and in nitrogen at 440–490°C.     

Thermally stable polymers containing 1,3,4-oxadiazole units obtained from Huisgen reaction

Thermally stable polymers containing 1,3,4-oxadiazole units have been synthesized through Huisgen reaction of the aromatic/aliphatic bis-tetrazole compounds with the aromatic/aliphatic bis-acid chlorides in pyridine as solvent.The obtained polymers are insoluble or slightly soluble even in polar aprotic solvents such as DMSO and DMF.Relatively high inherent viscosity values（0.61-1.33 dL/g,in 0.125%H₂SO₄ at 25℃） were observed for these compounds.Thermal analyses of the polymers using DSC and TGA techniques showed that the polymers have improved thermal stabilities.The glass transition temperature has not been observed in the fully aromatic polymers,but the polymers obtained from 5-[6-（1H-tetrazol -5-yl）hexyl]-lH-tetrazole（Ⅳ） showed very clear T_g.A model reaction was also investigated and the resulting bis-1,3,4-oxadiazole compound was characterized by conventional spectroscopy methods.