聚芳撑乙炔微孔骨架材料的合成及其气体吸附

有机微孔聚合物（MOPs）在气体存储、吸附分离和非均相催化等领域具有优良性质而广受关注.近年来,聚芳撑乙炔微孔骨架材料的研究成为MOPs领域中的热点.分别以三（4-乙炔基）苯胺、甲基三（4-乙炔基苯基）硅烷、苯基三（4-乙炔基苯基）硅烷为基本构筑单元,通过端炔基氧化均聚的方法,制备了三种聚芳撑乙炔微孔骨架材料,研究了结构组成对制备聚合物孔道性能和气体吸附性能的影响.氮气吸附测试结果表明,聚合物的Brunauer-Emmett-Teller （BET）比表面积的范围在602~715 m²·g^-1.由于骨架中含有富氮基团（三苯胺）以及具有较大的比表面积,在1.13 bar/273 K条件下,聚三（4-乙炔基）苯胺（TEPA-MOP）的CO₂吸附能力为1.59 mmol·g^-1.此外,TEPA-MOP和聚苯基三（4-乙炔基苯基）硅烷（TEPP-MOP）具有优良的选择性吸附性能,对CO₂/N₂的选择性吸附分别是69.9和73.2.聚合物TEPA-MOP具有优异的CO₂/N₂的选择吸附性和适中的CO₂吸附能力,因此将在气体吸附与分离方面具有潜在的应用前景.     

碲化锗场效应晶体管的制备及电学性能

采用微机械剥离法得到横向尺寸为10 μm的碲化锗(GeTe)纳米片. 通过电子束曝光和真空溅射镀膜的方法, 以钛金合金为接触电极, 制备基于二维碲化锗(2D-GeTe)纳米材料的场效应晶体管(FET), 并测定了其电学性能. 结果表明, 剥离所得GeTe纳米材料具有良好的结晶性, 光学带隙为1.98 eV, 属于p型半导体; 该场效应晶体管展现出了6.4 cm²·V^?1·s^?1的载流子迁移率和670的开关电流比的良好电学性能.     

一种高迁移率聚合物太阳能电池材料的合成及其器件表征

设计合成了一种中等带隙共轭聚合物,聚[N-(2-己基癸基)-2,2'-二噻吩-3,3'-二甲酰亚胺-交替共聚-5,5-(2,5-双(3-癸氧基噻吩)-2-噻吩基)-噻吩)](PBTI3T-O),其光谱吸收覆盖波长从400 nm到720 nm,具有较宽的吸收范围,同时易溶于氯苯溶剂,利于溶液加工。 PBTI3T-O与[6,6]-苯基-C71-丁酸异甲酯(PC₇₁BM)复合薄膜的空穴迁移率为5.90×10^-3 cm²/(V·s),该迁移率高于其它大部分聚合物电池给体材料。 由于PBTI3T-O较高的空穴迁移率,基于PBTI3T-O/PC₇₁BM的器件在活性层厚度为237 nm时,效率可以达到5.56%。 即使活性层膜厚进一步增加到约300 nm时,器件的效率仍能够保持其最高器件效率的97%,可见其具有在大面积加工工艺中的应用潜力。     

三苯胺亚乙基聚合物的制备及其物理性质的研究

从三苯胺和 1 ,2 -二溴乙烷制备了三苯胺亚乙基低分子量聚合物 (简称三苯胺聚合物 ) ,通过质谱表征 ,最大分子量的聚合物的链节数为 5 ,并对该聚合物进行了热重分析、紫外光谱和荧光光谱的分析 ,以及以此聚合物为载流子传输材料、酞菁氧钛为载流子产生材料制备了光导器件 ,测量了该光电器件的光电性质 ,显示出良好的光电性能 ( E1 / 2 =0 .5 lx.s)。该光电性能与目前激光打印机中所用的传输材料腙的光电性能相当 ,可以作为替代腙在打印机中使用。     

基于多层二硒化钨的高性能场效应晶体管的实验优化和理论模拟

采用微机械剥离法制备了基于不同厚度的高质量WSe₂纳米片的场效应晶体管(WSe₂-FETs), 研究了其性能的影响因素. 通过调控WSe₂纳米片及介电层的厚度、 测试温度及退火处理等, 结合理论模拟分析, 获得了WSe₂-FETs的最佳电学性能. 最终, 基于7层WSe₂纳米片的场效应晶体管表现出最优异的电学性能, 室温下载流子迁移率可达93.17 cm²·V^?1·s^?1; 在78 K低温下, 载流子迁移率高达482.78 cm²·V^?1·s^?1.     

全印刷碳纳米管薄膜晶体管构建及电性能研究

利用纳米压印和电刷镀技术在PET基体上制作出大面积金源、漏电极阵列。分别采用钛酸钡复合材料为介电层,印刷银电极为顶电极,聚芴-二噻吩基吡咯并吡咯二酮(PF8DPP)分离的半导体碳纳米管为有源层,在柔性基体上构建出全印刷碳纳米管薄膜晶体管器件和反相器。全印刷碳纳米管薄膜晶体管的开关比和迁移率分别达到4×10⁴和6 cm²·V^-1·s^-1,且器件表现出零回滞特性。构建的反相器在V_dd =8 V时,其增益可以达到12。     

印刷半导体碳纳米管薄膜晶体管光电性能研究

本文研究了聚[(2,7-9,9-二辛基芴基)-4,7-双(噻吩-2-基)苯并-2,1,3-噻二唑]（PFO-DBT）分离的半导体碳纳米管薄膜晶体管的光电性能。在超声和高速离心辅助下,PFO-DBT能够从商业化单壁碳纳米管中选择性分离出高纯的半导体碳纳米管。用得到的半导体碳纳米管溶液通过气溶胶喷墨印刷方法构建出高性能印刷薄膜晶体管器件。印刷碳纳米管薄膜晶体管表现出高的开关比（10⁷）和高迁移率（15.6 cm²·V^-1·s^-1）。并且所有制备的印刷薄膜晶体管具有很好的光敏感特性和很好的稳定性。     

基于荧光共轭聚合物的金属离子检测

以聚乙炔、聚芴、聚噻吩、聚苯撑为代表的荧光共轭聚合物,由于具有独特的光学性能、自组装性能和结构与性能的可调控性,可作为优异的光学传感材料。利用其具有较高摩尔消光系数和荧光量子产率的特点,可设计具有较高灵敏度和选择性的传感器,这已成为生物传感领域的研究热点。以荧光共轭聚合物为基础的金属离子检测,最初是以非水溶性的共轭聚合物为主,通过金属离子与聚合物链上特定基团(如吡啶、冠醚)的结合引起的聚合物荧光性质的变化可实现对某些离子的检测。在共轭聚合物主链上引入亲水性侧链,可大大增强共轭聚合物的水溶性,为金属离子的生物传感检测提供了新的思路,例如可引入能与金属离子结合的生物分子(如DNA、糖基等)来设计传感策略,进一步提高检测的特异性和灵敏度。本文综述了近年来以非水溶性和水溶性荧光共轭聚合物为传感材料,对具有重要生物学意义的重金属离子(Hg²⁺、Pb²⁺)、过渡金属离子(Cu²⁺、Eu³⁺、Ni²⁺、Fe³⁺、Fe²⁺、Ru³⁺、Ag⁺)和碱金属离子(K⁺、Na⁺、Li⁺)进行高灵敏度检测方面的研究进展,并对该领域的发展前景进行了展望。     

含3-甲基苯基-2,3-二氮杂萘-1-酮结构聚醚酰胺的合成、表征与性能

合成了一种新型芳香二胺双-(4-氨基苯基)-4-(3-甲基-4-苯氧基)-2,3-二氮杂萘-1-酮(1)[2-(4-aminophenyl)-4-(3-methyl-4-phenoxy)-2,3-phthalazinone-1,DAMPP].采用Yamazaki体系,二胺(1)能与多种芳香二酸进行溶液亲核缩聚反应,制得一类新型聚芳醚酰胺,其特性粘度为0.40～0.60dL/g;以MS,FTIR和¹HNMR等分析手段研究了新型二胺单体及其聚合物的结构;利用DSC和TGA研究了聚合物的耐热性能,结果表明,新型聚芳酰胺具有高的玻璃化转变温度为598～620K,N2气气氛中10%热质量损失温度在673K以上.聚合物2a～2c的表面电阻系数为3.75×10¹⁴～9.87×10¹⁵Ω,体积电阻系数为1.39×10¹⁶～4.09×10¹⁶Ω·cm.聚合物在二甲基甲酰胺、1-甲基吡咯烷酮和间甲酚等极性有机溶剂中可溶解,并经浇注得到透明、韧性薄膜.     

三苯胺甲醛二苯腙的合成及其光电性能研究

合成了一种新型的三苯胺类载流子传输材料三苯胺甲苯二苯腙,通过一系列手段对该化合物性能进行了表征,并以此化合物为载流子空穴传输材料,Y-型酞菁氧钛为载流子产生材料制备了光导器件,测定了该光电器件的光电性能,显示出良好的光电性能(E_1/2=1.0lx.s),可以替代常用的载流子传输材料二乙基苯甲醛二苯腙.     

Eu(III) Complex-doped PMMA with Fast Radiation Rate and High Emission Quantum Efficiency

Two Eu(III) complexes, (tris-4,4,4-trifluoro-1-phenyl-1,3-butanedione)(1,10-phenanthroline)europium(III) [Eu(tpb-H)₃(phen)] and (tris-4,4,4-trifluoro-1-phenyl-1,3-butanedione)(2,2′-bipyridine)europium(III)[Eu(tpb-H)₃-(bipy)] were synthesized from bi-dental oxygen and nitrogen ligands. Luminescent polymers were fabricated by incorporating deuterated Eu(III) complexes in poly(methylmethacrylate)(PMMA) matrixes. Luminescent PMMA containing Eu(tpb-D)₃(phen) exhibited relatively higher quantum yield[Φ, (48.7±4)%], faster radiation rate(k_r, 7.49×10² s^-1), sharper red emission[full width at half maximum(FWHM), 6.3 nm] and larger stimulated emission cross-section (SEC, 1.29×10^-20 cm²). The value of SEC is the same order as that of Nd-glass laser for practical use. Additionally, the thermal properties of Eu(tpb-H)₃(phen), Eu(tpb-H)₃(bipy), Eu(tpb-D)₃(phen)-PMMA, and Eu(tpb-H)₃(bipy)-PMMA were studied, indicating that the Eu(III) complexes and luminescent PMMA can be used for a long-term period in high temperature environment. Prepared luminescent polymers including Eu(tpb-D)₃(phen) have promising applications in novel organic Eu(III) devices, such as the high-power laser materials and optical fibers.     

Optimised hydrothermal synthesis of multi-dimensional hybrid coordination polymers containing flexible organic ligands

In this paper, we summarise our recent research interest in the hydrothermal synthesis and structural characterisation of multi-dimensional coordination polymers. The use of N-(phosphonomethyl)iminodiacetic acid (also referred to as H₄pmida) in the literature as a versatile chelating organic ligand is briefly reviewed. This molecule plays an important role in the formation of centrosymmetric dimeric [V₂O₂(pmida)₂]⁴⁻ anionic units, which were first used by us as building blocks to construct novel coordination polymers. Starting with [V₂O₂(pmida)₂]⁴⁻ in solution, we have isolated [M₂V₂O₂(pmida)₂(H₂O)₁₀] species (where M²⁺ = Mn²⁺, Co²⁺ or Cd²⁺) via the hydrothermal synthetic approach, which were then employed for the construction of [CdVO(pmida)(4,4′-bpy)(H₂O)₂]·(4,4′-bpy)_0.5·(H₂O), [CoVO(pmida)(4,4′-bpy)(H₂O)₂]·(4,4′-bpy)_0.5, [Co(H₂O)₆][CoV₂O₂(pmida)₂(pyr)(H₂O)₂]·2(H₂O) and [Cd₂V₂O₂(pmida)₂(pyr)₂(H₂O)₄]·4(H₂O) by the inclusion of bridging organic ligands in the reactive mixtures, such as pyrazine (pyr) and 4,4′-bipyridine (4,4′-bpy). These materials can contain channel systems, and exhibit magnetic behaviour, not only due to the V⁴⁺ centres but also to the transition metal centres which establish the links between neighbouring dimeric [V₂O₂(pmida)₂]⁴⁻ anionic units. A closely related anionic moiety, [Ge₂(pmida)₂(OH)₂]²⁻, was engineered to allow the study of such crystalline hybrid materials using one- and two-dimensional high-resolution solid-state NMR.     

Four Coordination Polymers Assembled with a New Biscarboxyl-functionalized Schiff Base Ligand

Based on a new biscarboxyl-functionalized Schiff base ligand 1,2-cyclohexanediamino-N,N'-bis[3-methoxyl-5-(p-carboxyl-phenylazo)] salicylidene(H₄L), four polymers,[(CH₃)₂NH₂]₂·[Mn₃(L)₂(H₂O)₄]·2DMF(CP1),[Fe₂(L)(H₂O)(DMF)](CP2),[(CH₃)₂NH₂]·[Cu(HL)]·H₂O(CP3) and[Ni₂(L)(teta)]·2DMF·H₂O(CP4), have been synthesized(teta=5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane). In CP1, both of the internal[N₂O₂] pocket and the external carboxylate groups of L^4- anion are ligated by Mn²⁺ ions, and the structure displays a layer. In CP2, the Fe²⁺ cations are linked by L^4- anions to form a binuclear double chain. CP3 displays a[Cu₂(HL)₂] dimer. In CP4, the Ni²⁺ ions are connected by L^4- anions to form a chain. The structures are further linked by hydrogen bonds to form 2D or 3D supramolecular architectures, respectively. CP1 exhibits adsorption ability to three organic dyes.     

Two alkynyl functionalized Co(II)-MOFs as fluorescent sensors exhibiting selectivity and sensitivity for Fe3+ and nitroaromatic compounds

Two alkynyl functionalized 3D frameworks with different structures were successfully synthesized for selective and sensitive detection of Fe³⁺ ions and nitroaromatic compounds through fluorescence quenching.     

钯(Ⅱ)三元配合物稳定性及其与DNA作用研究

合成了[Pd(bipy)(DL-gly)]Cl•2H₂₂O(2)两个钯三元配合物. 配合物１和２的稳定常数对数值lgβ分别为13.81和13.71, 表征常数ΔlgK、lgX高于统计值, 表明在配合物分子内存在d-p π电子协同效应. 紫外光谱、荧光光谱结果表明, 配合物１和２与鱼精DNA主要以插入方式键合, 键合常数分别为2.37×10⁶(1)和4.57×10⁶(2). CD光谱图也显示, 配合物与DNA分子之间发生了作用. 质粒pBR322 DNA的凝胶电泳图表明, 配合物浓度在3.0０×10^-3～7.5０×10^-4 mol •L^-1范围内对DNA分子有切割作用, 配合物浓度低于3.75×10^-4 mol •L^-1时则主要以插入方式与DNA键合.     

Synthetic [FeFe]-H2ase models bearing phosphino thioether chelating ligands

Through the oxidation-reduction combination procedure, the neutral tri-substituted {2Fe3S} complex 2 was synthesized by replacing the CO ligand in 1 with phosphine. This substitution leads to the Fe-Fe bonds in 1 and 2 with large Lewis basicity difference, i.e. △pK_a^MeCN~10.     

Cd(Ⅱ)-btec配聚物的合成、结构及光电性能

采用水热法合成了Cd(Ⅱ)配聚物[Cd₃Na₂(btec)_n(1)和{[Cd₃Na₂(btec)₂(H₂O)₂]·4H₂O}_n(2)(H₄btec=1,2,4,5-苯四甲酸). 单晶结构解析结果表明, 配聚物1和2的不对称单元中均包含2种晶体学不等效的Cd(Ⅱ)离子, 分别为六配位和八配位, 均通过btec^4-基团桥连成具有3D无限结构的配聚物. 二者区别在于: 2个配聚物中Na(Ⅰ)离子的配位环境不同, 且配聚物2中存在游离水分子. 表面光伏技术研究结果表明, 2个配聚物在300~500 nm范围内呈现出明显的光伏响应, 表明它们具有一定的光-电转换能力. 对配聚物的表面光电压谱(SPS)与紫外-可见吸收光谱(UV-Vis)进行了关联, 并对配聚物进行了X射线衍射(XRD)和热重(TG)分析.     

Hydrothermal synthesis, structural characterisation and magnetic behaviour of hybrid complexes of N-(phosphonomethyl)iminodiacetate

Two new compounds containing multidentate chelating organic residues of N-(phophonomethyl)iminodiacetic acid (H₄pmida), [M(pyr)(H₂O)₄][M₂(Hpmida)₂(pyr)(H₂O)₂]·2(H₂O) (where pyr=pyrazine and M=Co²⁺ or Ni²⁺ for I and II, respectively) have been synthesised and structurally characterised by single-crystal and powder X-ray diffraction, elemental analysis, infrared spectroscopy, thermal analysis and solid-state ³¹P MAS NMR. The compounds contain discrete binuclear anionic [M₂(Hpmida)₂(pyr)(H₂O)₂]²⁻ units in which one pyrazine ligand bridges two M²⁺ cations which are completely trapped inside three five-membered chelate rings formed by the Hpmida³⁻ ligands. These moieties close pack in the ac plane via a series of strong and highly directional O–HO hydrogen bonds leading to the formation of anionic layers. One-dimensional cationic coordination polymers are placed in-between and strongly hydrogen-bonded to these layers. The magnetic properties of these two materials are also reported.     

Chains, ladders and sheets of d metal–organic polymers generated from the flexible bipyridyl ligands

By use of the three-layer diffusion method, reactions of flexible bipyridyl ligands (4,4′-bpp or 3,3′-bpp) with M(II) salts (M = Zn, Cd) and multi-carboxylate ligands resulted in the formation of four interesting d¹⁰ metal–organic coordination polymers: [Zn(μ-4,4′-bpp)Br₂]_n (1), [Zn(μ-4,4′-bpp)(1,2-bdc)]_n · nH₂O (2), [Zn(μ-3,3′-bpp)(1,3-bdc)]_n · nCH₃OH · 2nH₂O (3) and [Cd(μ-3,3′-bpp)(C₄H₂O₄)]_n · 3nH₂O (4) (4,4′-bpp = 2,2′-bis(4-pyridylmethyleneoxy)-1,1′-biphenylene; 3,3′-bpp = 2,2 ′-bis(3-pyridylmethyleneoxy)-1,1′-biphenylene; bdc=benzenedicarboxylate, C₄H₄O₄ = fumaric acid). Complex 1 has a 2D sheet structure consisting of two unusual zigzag Zn(II) chains which are nearly perpendicular to each other. Complex 2 is comprised of two-leg ladders, in which [Zn(4,4′-bpp)] chains serve as the side rails and 1,2-bdc ligands serve as the cross rungs. In complex 3, every two 1,3-bdc ligands connect the neighbouring Zn(II)-3,3′-bpp dimetallic rings in η¹ coordination modes into an interesting chain structure. Complex 4 consists of an anionic macrocycle-containing cadmium dicarboxylate sheets that are separated by 3,3′-bpp. These d¹⁰ metal complexes exhibit high thermal stabilities and strong luminescence efficiencies.     

微流控芯片直接化学发光检测方法研究

基于Ru(bipy)₃²⁺的化学发光反应,建立了一种新型微流控芯片化学发光检测方法.以草酸为研究对象,探讨了表面活性剂CTAB的浓度、化学发光反应酸度以及Ru(bipy)₃²⁺浓度等因素对峰形以及检测灵敏度和重现性的影响.草酸的线性范围为1.0×10^-4~5.0×10^-6mol/L,检测限达到2.0×10^-6mol/L.该方法的建立为微流控芯片分离检测某些有机酸、药物、环境物质及核酸等提供了新方法.