Synthesis and structures of new heteronuclear cluster complexes [PPh4][Fe4Rh3Se2(CO)16] and [PPh4]2[Fe3Rh4Te2(CO)15]

The reaction of the K₂[Fe₃Q(CO)₉] clusters (Q = Se or Te) with Rh₂(CO)₄Cl₂ under mild conditions is accompanied by complicated fragmentation of cores of the starting clusters to form large heteronuclear cluster anions. The [PPh₄][Fe₄Rh₃Se₂(CO)₁₆] and [PPh₄]₂[Fe₃Rh₄Te₂(CO)₁₅] compounds were isolated by treatment of the reaction products with tetraphenylphosphonium bromide. The structures of the products were established by X-ray diffraction. In both compounds, the core of the heteronuclear cluster consists of two octahedra fused via a common Rh₃ face. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 775–778, May, 2006.     

Synthesis amd characterization of [Et4,N]2[Mo(CO)4(SR)2] (R = Ph,Bz): New,potentially chelating bis-thiolate species

The new complexes [Et₄N]₂ [Mo(CO)₄(SR)₂] (R = Ph, Bz) have been prepared by reaction of [Et₄N] [SR] with (norbornadiene)Mo(CO)₄ at low temperature. The IR spectra and electrochemical behavior of these two species are different, perhaps implicating different conformational isomers with respect to the thiolate ligands. These complexes may prove to be valuable reagents for the synthesis of new heterometallic compounds, by virtue of their cis-monodentate thiolate ligands.     

Alkyl- and aryl-platinum(II) complexes from K2[PtCl4] and tetraorganotin compounds in dimethylsulphoxide. Preparation and reactions of complexes [PtR2(DMSO)2] and [PtR(C) (DMSO)2]

The reaction between K₂[PtCl₄] and a variety of tetraorganotin compounds SnMe₃R (R = Me, aryl) in DMSO gives the complexes cis-[PtR₂(DMSO)₂] and trans-[PtR(Cl)(DMSO)₂] in which the DMSO ligands are bound to Pt through S in the solid state. The DMSO ligands are easily displaced by a variety of N, P, As and Sb donors.     

Synthese und dynamisches Verhalten von [Rh2(μ-H)3H2(PiPr3)4]+. Beiträge zur Reaktivität des Tetrahydridodirhodium-Komplexes [Rh2H4(PiPr3)4]

Synthesis and Dynamic Behaviour of [Rh₂(μ-H)₃H₂(PiPr₃)₄]⁺. Contributions to the Reactivity of the Tetrahydridodirhodium Complex [Rh₂H₄(PiPr₃)₄] An improved synthesis of [Rh₂H₄(PiPr₃)₄] ( 2 ) from [Rh(η³-C₃H₅)(PiPr₃)₂] ( 1 ) or [Rh(η³-CH₂C₆H₅)(PiPr₃)₂] ( 3 ) and H₂ is described. Compound 2 reacts with CO or CH₃OH to give trans-[RhH(CO)(PiPr₃)₂] ( 4 ) and with ethene/acetone to yield a mixture of 4 and trans-[RhCH₃(CO)(PiPr₃)₂] ( 5 ). The carbonyl(methyl) complex 5 has also been prepared from trans-[RhCl(CO)(PiPr₃)₂] ( 6 ) and CH₃MgI. Whereas the reaction of 2 with two parts of CF₃CO₂H leads to [RhH₂(η²-O₂CCF₃) · (PiPr₃)₂] ( 8 ), treatment of 2 with one equivalent of CF₃CO₂H in presence of NH₄PF₆ gives the dinuclear compound [Rh₂H₅(PiPr₃)₄]PF₆ ( 9a ). The reactions of 2 with HBF₄ and [NO]BF₄ afford the complexes [Rh₂H₅(PiPr₃)₄]BF₄ ( 9b ) and trans-[RhF(NO)(PiPr₃)₂]BF₄ ( 11 ), respectively. In solution, the cation [Rh₂(μ-H)₃H₂(PiPr₃)₄]⁺ of the compounds 9a and 9b undergoes an intramolecular rearrangement in which the bridging hydrido and the phosphane ligands are involved.     

Synthesis,Reactivity, and Fluxional Behaviour of [Ir2Rh2(CO)12], and Crystal Structure of [Ir2Rh2(CO)8(norbornadiene)2]

The synthesis of [Ir₂Rh₂(CO)₁₂] ( 1 ) by the literature method gives a mixture 1 /[IrRh₃(CO)₁₂] which cannot be separated using chromatography. The reaction of [Ir(CO)₄]^? with 1 mol-equiv. of [Rh(CO)₂(THF)₂]⁺ in THF gives pure 1 in 61% yield. Crystals of 1 are highly disordered, unlike those of its derivative [Ir₂Rh₂(CO)₅(μ₂-CO)₃(norbornadiene)₂] which were analysed using X-ray diffraction. The ground-state geometry of 1 in solution has three edge-bridging CO's on the basal IrRh₂ face of the metal tetrahedron. Time averaging of CO's takes place above 230 K. The CO site exchange of lowest activation energy is due to one synchronous change of basal face, as shown by 2D- and VT-¹³C-NMR. Substitution of CO by X^? in 1 takes place at a Rh-atom giving [Ir₂Rh₂(CO)₈(μ₂-CO)₃X]^? (X = Br, I). Substitution by bidentate ligands gives [Ir₂Rh₂(CO)₇(μ₂-CO)₃(η⁴-L)] (L = norbornadiene, cycloocta-1,5-diene) where the ligand L is chelating a Rh-atom of the basal IrRh₂ face. Carbonyl substitution by tridentate ligands gives [Ir₂Rh₂(CO)₆(μ₂-CO)₃(μ₃-L)] (L = 1,3,5-trithiane, tripod) with L capping the triangular basal face of the metal tetrahedron. Carbonyl scrambling is also observed in these substituted derivatives of 1 and is mainly due to the rotation of three terminal CO's about a local C₃ axis on the apical Ir-atom.     

Electrical Behaviour of Heterobimetallic [MM′(EtCS2)4] (MM′=NiPd,NiPt, PdPt) and MM′X‐Chain Polymers [PtM(EtCS2)4I] (M=Ni,Pd)

Herein, we report the isolation of new heterobimetallic complexes [Ni_0.6Pd_1.4(EtCS₂)₄] ( 1 ), [NiPt(EtCS₂)₄] ( 2 ) and [Pd_0.4Pt_1.6(EtCS₂)₄] ( 3 ), which were constructed by using transmetallation procedures. Subsequent oxidation with iodine furnished the MM′X monodimensional chains [Ni_0.6Pt_1.4(EtCS₂)₄I] ( 4 ) and [Ni_0.1Pd_0.3Pt_1.6(EtCS₂)₄I] ( 5 ). The physical properties of these systems were investigated and the chain structures 4 and 5 were found to be reminiscent of the parent [Pt₂(EtCS₂)₄I] species. However, they were more sensitively dependent on the localised nature of the charge on the Ni ion, which caused spontaneous breaking of the conduction bands.     

Crystallochemical causes of the different thermal properties of [Cu(py)2(NCS)2] and [Cu(4-Mepy)2(NCS)2] complexes

The crystal structures and thermal behaviour of [Cu(py)₂(NCS)₂] (at 293) and [Cu(4-Mepy)₂(NCS)₂] and 180 K) complexes have been compared with their different temperature behaviour. It was found that the thermal stability of coordinated thiocyanate ligands in the course of thermal decomposition depends not only on the properties of the ligand L, but it is related to the arrangement of the thiocyanatocopper chains in the crystal structures.     

Catalytic properties of binuclear rhodium(II) complexes in hydrogenation and isomerization of allylbenzene

Binuclear hexafluoroacetylacetonate complexes of Rh(II) with axial ligands (Py, H₂O) exhibit activity in hydrogenation and isomerization of allylbenzene, and the isomerization reaction also takes place in an atmosphere of Ar. The catalytic system [Rh₂(hfacac)₄(H₂O)₂]-Ph₃P is much more active than Rh(II) hexafluoroacetylacetonate complexes in transformation of allylbenzene. Treatment of the acetate complex [Rh₂(O₂CCH₂)₄] with sodium borohydride significantly increases its activity, probably due to the formation of [Rh₂(O₂CCH₃)₃]⁺ and [Rh₂(O₂CCH₂)₂]²⁺ complexes.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 9, pp. 1957–1961, September, 1989.     

Syntheses and structural characterizations of the octahedral boride clusters [Rh2Ru4H(CO)16−2x (nbd) x B] (x=1,2) and gold(I) phosphine derivatives (nbd=norbornadiene)

The reaction of less than one equivalent of [Rh₂Cl₂(nbd)₂] with [Ru₄H(CO)₁₂BH]⁻, which contains a semi-interstitial boron atom, yields the heterometallic boride clustercis-[Rh₂Ru₄H(CO)₁₂(nbd)₂B] which has been characterized by spectroscopic and X-ray diffraction methods. The cluster has an octahedral core, consistent with an 86 electron count. Deprotonation yields the conjugate basecis-[Rh₂Ru₄(CO)₁₂(nbd)₂B]⁻ which has been isolated and fully characterized as the [(Ph₃P)₂N]⁺ salt. There is little structural perturbation upon going fromcis-[Rh₂Ru₄H(CO)₁₂(nbd)₂B] tocis-[Rh₂Ru₄(CO)₁₂(nbd)₂B]⁻ and neither cluster shows a tendency for the formation of thetrans skeletal isomer in contrast to the analogous carbonyl clustercis-[Rh₂Ru₄(CO)₁₆B]⁻. If the reaction of [Rh₂Cl₂(nbd)₂] with [Ru₄H(CO)₁₂BH]⁻ is allowed to proceed for 30 min and [R ₃PAuCl] (R=Ph, C₆H₁₁, 2-MeC₆H₄) is then added, the clusterscis-[Rh₂Ru₄(CO)₁₂(nbd)₂B(AuPR₃)] andcis-[Rh₂Ru₄(CO)₁₄(nbd)B(AuPR₃)] are formed in yields that are dependent upon the initial reaction period. The single crystal structures ofcis-[Rh₂Ru₄(CO)₁₂(nbd)₂B(AuPPh₃)] andcis-[Rh₂Ru₄(CO)₁₄(nbd)B(AuPPh₃)] are reported. In contrast to their all-carbonyl analoguescis-[Rh₂Ru₄(CO)₁₆B(AuPR ₃)] (R=Ph or C₆H₁₁), the nbd derivatives do not undergocis →trans skeletal isomerism.     

Synthese und Struktur eines Molybdän–Gadolinium-Heterometall-Komplexes Die Struktur von [Li(thf)4]2[Cp2MoSGdBr4(thf)]2

Synthesis and structure of a Molybdenum–Gadolinium Heterometallic Complex. The Structure of [Li(thf)₄]₂[Cp₂MoSGdBr₄(thf)]₂ [Cp₂MoHLi] reacts in THF with S and GdBr₃ to yield the tetranuclear heterobimetallic complex [Li(thf)₄]₂[Cp₂MoSGdBr₄(thf)]₂. The bonding situation and the structure of this compound were characterized by X-ray structure analysis (space group P1 (No. 2), Z = 1, a = 10.845(2) Å, b = 12.166(2) Å, c = 15.881(2) Å, α = 101.74(2)°, β = 97.62(2)°, γ = 103.97(2)°). Each S atom of the central Mo₂S₂-ring is coordinated by a GdBr₄(thf) fragment. Additionally each Mo atom is connected to two Cp ligands. This leads to a tetrahedral coordination of the Mo atoms and a octahedral coordination of the Gd ions.     

Cobalt Chalcogenide Clusters. Synthesis,Characterization and DFT Calculations of [Co4Se2(CO)10] and [Co4Te2(CO)11]. Crystal Structure of [Co8Se4(CO)16(μ‐dppa)2]

The reactions of [Co₂(CO)₈] with E(SiMe₃)₂ (E = Se, Te) in CH₂Cl₂ result in the formation of the compounds [Co₄Se₂(CO)₁₀]> ( 1 ) and [Co₄Te₂(CO)₁₁] ( 2 ), respectively. Both cluster complexes have similar molecular structures in which the cobalt atoms form four‐membered rings with μ₄‐bridging chalcogen atoms (Se and Te) above and below the plane of the metal atoms and the carbonyl ligands as either terminal or μ₂‐bridging ligands. DFT‐calculations for both compounds have been carried out in order to obtain some more information about their electronic distribution. In the presence of the phosphine Ph₂PC≡CPPh₂ (dppa), the reaction of [Co₂(CO)₈] with Se(SiMe₃)₂ leads to the formation of [Co₈Se₄(CO)₁₆(μ‐dppa)₂] ( 3 ). During the reaction two molecules of [Co₂(CO)₈] have been added to the acetylene groups of the dppa ligands, whilst the remaining cobalt atoms coordinate to the phosphorus atoms of the phosphine. In this compounds the selenium atoms act as μ₃‐ligands, bridging the metal atoms bonded to the phosphorus with those bonded to the acetylene groups.     

Complexing behaviour of aromatic thioamides (ArCSNHCOR). Transition metal complexes of N-carboethoxy-4-chlorobenzene- and N-carboethoxy-4-bromobenzene thioamide ligands

N-Carboethoxy-4-chlorobenzene thioamide (Hcct or HL) and N-carboethoxy-4-bromobenzene thioamide (Hcbt or HL) react with bivalent (Ni, Co, Cu, Ru, Pd and Pt), trivalent (Ru and Rh) and tetravalent (Pt) transition metal ions to give [M^II(L)₂], [Ru^III(L)₃], [Rh^III(L)(HL)Cl₂] and [Pt(L)₂Cl₂] complexes, respectively. In the presence of pyridine, Co^II and Ni^II salts react with the ligands (HL) to give [M^II(L)₂Py] (M = Co and Ni) complexes. Soft metal ions abstract sulphur from the ligands to yield the corresponding sulphide, together with oxygenated forms of the ligands. All the metal complexes have been characterised by chemical analyses, conductivity, spectroscopic and magnetic measurements.     

Synthesis and reactivity of rhodium(I) complexes of the type Rh(L-L)(CO)[P(OPh)3] and Rh(L-L)[P(OPh)3]2

Summary The carbonyl ligands in the Rh¹ complexes Rh(L-L)(CO)₂ [L-L=anthranilate (AA) orN-phenylanthranilate(FA) ions] are replaced by P(OPh)₃ to form the mono-or disubstituted products, Rh(L-L)(CO)[P(OPh)₃] and Rh(L-L)[P(OPh)₃]₂ respectively depending on the [P(OPh)₃]/[Rh] molar ratio, at room temperature and in air. Under argon at [P(OPh)₃]/[Rh]4 theortho-metallated Rh¹ complex Rh[P(OPh)₃]₃[P(OC₆H₄)-OPh)₂] is formed. The new route forortho-metallated Rh¹ complex synthesis is described.The Rh(AA)(CO)₂ complex was used as a catalyst precursor in hydroformylation of olefins.     

Synthese und Kristallstrukturen von [Li(thf)4]2[Bi4I14(thf)2], [Li(thf)4]4[Bi5I19] und (Ph4P)4[Bi6I22]

Synthesis and Crystal Structure of [Li(thf)₄]₂[Bi₄I₁₄(thf)₂], [Li(thf)₄]₄[Bi₅I₁₉], and (Ph₄P)₄[Bi₆I₂₂] Solutions of BiI₃ in THF or methanol react with MI (M = Li, Na) to form polynuclear iodo complexes of bismuth. The syntheses and results of X-ray structure analyses of compounds [Li(thf)₄]₂[Bi₄I₁₄(thf)₂], [Li(thf)₄]₄[Bi₅I₁₉], [Na(thf)₆]₄[Bi₆I₂₂] and (Ph₄P)₄[Bi₆I₂₂] are described. The anions of these compounds consist of edge-sharing BiI₆ and BiI₅(thf) octahedra. The Bi atoms lie in a plane and are coordinated by bridging and terminal I atoms and by THF ligands in a distorted octahedral fashion. [Li(thf)₄]₂[Bi₄I₁₄(thf)₂]: Space group P1 (No. 2), a = 1 159.9(6), b = 1 364.6(7), c = 1 426.5(7) pm, α = 114.05(3), β = 90.01(3), γ = 100.62(3)°. [Li(thf)₄]₄[Bi₅I₁₉]: Space group P2₁/n (No. 14), a = 1 653.0(9), b = 4 350(4), c = 1 836.3(13) pm, β = 114.70(4)°. [Na(thf)₆]₄[Bi₆I₂₂]: Space group P2₁/n (No. 14), a = 1 636.4(3), b = 2 926.7(7), c = 1 845.8(4) pm, β = 111.42(2)°. (Ph₄P)₄[Bi₆I₂₂]: Space group P1 (No. 2), a = 1 368.6(7), b = 1 508.1(9), c = 1 684.9(8) pm, α = 98.28(4), β = 95.13(4), γ = 109.48(4)°.     

Anionische Nickel-Pseudohalogenid-Komplexe der Typen [Ni{N(CN)2}3]− und [Ni{N(CN)2}2(NCS)2]2−

Anionie Nickel Pseudohalide Complexes of the Types [Ni{N(CN)₂}₃]^? and [Ni{N(CN)₂}₂(NCS)₂]^2? The preparation of a new type of anionic pseudohalide complexes of nickel [Ni{N(CN)₂}₃]^? and of mixed thiocyanate-dicyanamide complexes [Ni{N(CN)₂}₂(NCS)₂]^2? is reported. The structures of the complexes are discussed on the basis of IR- and magnetic measurements. The new compounds are representing polymer octahedral complexes with a bridging function of the dicyanamide ligands.     

Dinuclear Manganese(II) Complexes with Bridging Selenidodiarsenate Anions [As2Se4]4−, [As2Se5]4− and [As2Se6]2−

Solvothermal reaction of [MnCl₂(amine)] (amine = terpy and tren) with elemental As and Se at a 1:1:2 molar ratio in H₂O/tren (10:1) affords the dimanganese(II) complexes [{Mn(terpy)}₂(μ‐As₂Se₄)] ( 1 ) and [{Mn(tren)}₂(μ‐As₂Se₅)] ( 2 ) respectively. The tetradentate [As₂Se₄]^4? bridging ligands in 1 contain a central As–As bond and exhibit approximately C_2h symmetry. Pairs of gauche sited Se atoms participate in five‐membered As₂Se₂Mn chelate rings. In contrast, two AsSe₃ pyramids share a common corner in the [As₂Se₅]^4? ligands of 2 and each coordinates an [Mn(tren)]²⁺ fragment through a single terminal Se atom. Such dinuclear complexes are linked into tetranuclear moieties through weak Se···Mn interactions of length 3.026(3) Å involving one of these terminal Se atoms. At a 1:3:6 molar ratio, solvothermal reaction of [MnCl₂(tren)] with As and Se leads to formation of a second dinuclear complex [{Mn(tren)}₂(μ‐As₂Se₆)₂] ( 3 ), which contains two bridging bidentate [As₂Se₆]^2? ligands. These are cyclic with an As₂Se₄ ring and can be regarded as being derived from [As₂Se₅]^4? anions by formation of two Se‐Se bonds to an additional Se atom.     

Structural Chemistry of Chiral Complexes. NMR and X-ray studies on Rh1 compounds of (S)-1-[bis(p-methylphenyl)phosphino]-2-[(p-methoxybenzyl)amino]-3-methylbutane

The Rh¹(diolefin)complexes [Rh(nbd)( 2 )][PF₆] [Rh(1,5-cod)( 2 )][PF₆], and [Rh((Z)-α -acetamidocinnamic acid)( 2 )][PF₆] ( 2 = the chiral P,N-ligand (S)-1-[bis(p-methylphenyl)phospino]-2-[p-methoxybenzyl)amino]-3-methylbutane have been prepared and characterized. These complexes exit as a mixture of isomers arising from different five-membered-ring conformations and diastereoisomers due to both the prochiral nitrogen and olefin ligands. The three-dimensional solutions structures of these complexes have been studied with the specific aim of understanding how the chiral pocket is built. Aspects of the exchange dynamics and their possible relevance to homogeneous hydrogenation are discussed The solid-state structure for the nbd complex, [Rh(nbd)( 2 )][PF₆], as well as detailed one- and two-dimensional ³¹P-, ¹³C-, and ¹H-NMR results are presented.     

Cobalt(II) complexes of 5,7-dimethyl[1,2,4]-triazolo-[1,5-a]-pyrimidine. Spectroscopic characterization,XRD study and antimicrobial activity

Summary Several cobalt(II) complexes of 5,7-dimethyl-[1,2,4]-tria-zolo-[1,5-a]-pyrimidine (DMTP) have been prepared and characterized by thermal and spectroscopic techniques. The crystal structure of [Co(DMTP)₂(H₂O)₄]Br₂·2H₂O has been determined by XRD; the metal ion is octahedrally coordinated by two DMTP ligands through the usual N(3) site and four water molecules. Metal binding to N(3) for DMTP is consistent with the electronic properties calculated with the MOPAC programme. All the complexes were screened for their activity against several types of bacteria, showing a broad-spectrum antimicrobial activity.     

Formation of Isomeric Tetrathiotungstate Clusters [{Cp*Ru(CO)}2(WS4){W(CO)4}] by the Reaction of [Cp*2Ru2S4] with [W(CO)3(MeCN)3]

Thermal and photochemical interconversion occurs between the isomeric pair of tetrathiotungstate [WS₄]²⁻ clusters 1 and 2 , which were formed by thermolysis of [Cp^*₂Ru₂S₄] and [W(CO)₃(MeCN)₃] [Eq. (1)] and then structurally characterized. During synthesis, a dramatic redistribution of ligands between the Ru and W atoms takes place without the loss of any CO and S ligands.     

Syntheses and structures of Tetranuclear Cluster complexes of molybdenum [Mo4(μ3-S)2(μ2-S)4 X 2-(PMe3)6] (X = SH,Cl, Br,I, SCN) and [Mo4(μ3-S)2-(μ2-S)4 (dtc)2(PMe3)4] (dtc = diethyldithiocarbamate)

A molybdenum cluster complex [Mo₄(μ₃-S)₂(μ₂-S)₄)(SH)₂(PMe_{3 6}] has been synthesized by the reaction of (NH₄)₂Mo₃S₁₃ with trimethylphosphine. The cluster core is composed of four molybdenum atoms arranged in the rhombus bridged by two capping and four bridging sulfur atoms. Two SH and six tri-methylphosphine ligands are coordinated to the terminal positions. The mean oxidation stares of molybdenum is +3.5 and there are five Mo-Mo bonds consistent with ten metal cluster electrons. The complex has been converted into [Mo₄(μ₃-S)₂(μ₂-S)₄ X ₂(PMe₃)₆] (X=Cl, Br, I, SCN) and [Mo₄μ₃-S₂(μ₂-S)₄ (die)₂(PMe₃)₄] (dtc - diethyldithiocarbamate). In the case of the dtc complex, two terminal trimetlaylphosphine ligands are displaced and dtc ligands are coordinated in chelate fashion. The structures of the SH, Cl, Br, and dtc complexes have been determined by X-ray crystallography. Molecular orbital calculations with DV-Xα method has shown large HOMO-LUMO gaps (1.52-1.74eV) for [Mo₄S₆ X ₂(PH₃)₄] (X= SH, Cl, and Br).