Encryption and decryption using a sandwich phase diffuser made by using two speckle patterns and placed in the Fourier plane: Simulation results

In the present paper, we describe the encryption and decryption of two-dimensional images. The encryption is done by employing a sandwich phase diffuser made by using two elongated speckle patterns, and placed in the Fourier plane of a double random phase encoding system. After encryption, the two constituent phase diffusers of such a sandwich diffuser are separated. During decryption, if the conjugate of either of the two elongated phase speckle patterns is used, the image cannot be retrieved. Correct decryption is also not possible if a sandwich diffuser with any of the phase speckle patterns is shifted in position with respect to the other. For decryption, the encrypted image is Fourier transformed and multiplied by the conjugate of the sandwich diffuser, and then the product is further Fourier transformed. It is possible to generate the image only if both the elongated phase speckle patterns are matched point-to-point and then the proper conjugate is made. The use of elongated speckle patterns in constituting a sandwich phase diffuser makes the system less complicated as compared to the use of a sandwich diffuser made with normal speckle patterns, enabling an easy alignment of the random phase diffuser at the time of rejoining the constituent diffusers for making the right key. The ease of alignment is due to the reduction of the requirement of 360° scanning at the time of rejoining these diffusers with little reduction in the security of the system. Simulation results are presented in support of the proposed idea. For optical implementation, the decrypted image may be obtained by generating a phase conjugate wave by the phase conjugation technique, and passing through the same sandwich phase diffuser. To evaluate the reliability of the technique, mean square error (MSE) between the decrypted and original image has been calculated.     

Digital ultrasonic speckle phase-shifting method

The digital ultrasonic speckle phase-shifting method (USPM), which is introduced in this paper, can be applied to the measurement of small displacement that is smaller than speckle size at the test point compared to traditional ultrasonic speckle correlation method (USCM). Using USPM, a digital ultrasonic reference signal is introduced to interfere with the ultrasonic speckle signal, which is picked up at the test point on an object surface and is referred to as the object signal. As the phase of the reference signal is shifted several times using the software and then they superimpose with the object signal respectively, the phase of the object signal can be calculated according to the intensities of the superimposed signals. If the object surface moves a small distance, the phase variation of the object speckle can be detected by the same process. As a result, the displacement of the object surface can be measured. Based on the feature of ultrasonic speckles, inner surface displacement of an object can be measured using this proposed method. In this case, the effect of outer surface roughness to the measurement accuracy of USPM is examined experimentally. The experimental results show that the measurement is successful when the displacement is smaller than half of the speckle size at the test point and the roughness parameter R_a of the outer surface of the specimen is less than about 5.47 μm.     

Hadamard speckle contrast reduction

The condition for a diffuser to produce the maximum speckle contrast reduction with the minimum number of distinct phase patterns is derived. A binary realization of this optimum diffuser is obtained by mapping the rows or columns of a Hadamard matrix to the phase patterns. The method is experimentally verified in the Grating Light Valve laser projection display.     

Screening dependence superconducting state parameters of La100−CGaC binary metallic glasses

The screening dependence theoretical investigations of the superconducting state parameters (SSP) viz. electron-phonon coupling strength λ, Coulomb pseudopotential μ^*, transition temperature T_C, isotope effect exponent α and effective interaction strength N₀V of six binary La_100−CGa_C (C=16, 20, 22, 24, 26 and 28 at.%) metallic glasses have been reported using Ashcroft's empty core (EMC) model potential for the first time. Five local field correction functions proposed by Hartree (H), Taylor (T), Ichimaru-Utsumi (IU), Farid et al. (F) and Sarkar et al. (S) are used in the present investigation to study the screening influence on the aforesaid properties. The T_C obtained from H-local field correction function is found in qualitative agreement with available experimental data and show almost linear nature with the concentration (C) of ‘Ga’ element. A linear T_C equation is proposed by fitting the present outcomes for H-local field correction function, which is in conformity with other results for the experimental data. Also, the present results are found in qualitative agreement with other such earlier reported data, which confirms the superconducting phase in the metallic glasses.     

Measurements of axial displacements undergone by a diffusing object in speckle photography

The speckles of the image plane of an object are both radially shifted and decorrelated when the object is axially translated through an amount ?. We demonstrate that this radial shift, which is related to the position of the pupil of the optical system, disappears when the pupil lies in the back focal plane of the imaging lens. However, if the irradiance of the image plane is twice recorded on a photographic plate which is laterally shifted through ζ_H between the exposures, the minimum value of the contrast of the Fourier fringes exhibited by the plate after processing, gives the value of ? if ? is less than a particular value, ?_M which will be defined. Also we propose a new speckle measurement method in which the fringes are automatically removed when ? is greater than ?_M. We record the image of the object illuminated in convergent light through an amplitude diffuser placed in the Fourier plane of the object. The mean speckle speckle size of the diffuser is equal to the mean size of the speckles generated by the object in its Fourier plane.     

Clustering coefficient and community structure of bipartite networks

Many real-world networks display natural bipartite structure, where the basic cycle is a square. In this paper, with the similar consideration of standard clustering coefficient in binary networks, a definition of the clustering coefficient for bipartite networks based on the fraction of squares is proposed. In order to detect community structures in bipartite networks, two different edge clustering coefficients LC₄ and LC₃ of bipartite networks are defined, which are based on squares and triples respectively. With the algorithm of cutting the edge with the least clustering coefficient, communities in artificial and real world networks are identified. The results reveal that investigating bipartite networks based on the original structure can show the detailed properties that is helpful to get deep understanding about the networks.     

Measurement of the spectral distribution of a multi-mode dye laser light by using speckle patterns

A simple method of measuring the wavelength γ₁ and the spectral line spacing Δγ of a multi-mode dye laser light by using the correlated speckle patterns produced at the far-field of a diffuser is proposed. Examples of the obtained values of γ₁ and Δγ are 6.0 × 10³ Å and 3.0 × 10¹ Å, respectively.     

Theoretical study of superconducting state parameters of binary metallic glasses by a pseudopotential method

The theoretical investigations of the superconducting state parameters (SSP) viz. electron–phonon coupling strength λ, Coulomb pseudopotential μ¹, transition temperature T_C, isotope effect exponent α and effective interaction strength N₀V of binary metallic glasses have been reported using Ashcroft’s empty core (EMC) model potential for the first time. Five local field correction functions proposed by Hartree (H), Taylor (T), Ichimaru–Utsumi (IU), Farid et al. (F) and Sarkar et al. (S) are used in the present investigation to study the screening influence on the aforesaid properties. It is observed that λ and T_C are quite sensitive to the selection of the local field correction functions in comparisons with μ¹, α and N₀V. The T_C obtained from H-local field correction function is found in qualitative agreement with available experimental data and show linear nature with the concentration (C). A linear T_C equation is proposed by fitting the present outcomes for H-local field correction function, which is in conformity with other results for the experimental data. Also, the present results are found in qualitative agreement with other such earlier reported data, which confirms the superconducting phase in the metallic glasses.     

A derivative based simplified phase tracker for a single fringe pattern demodulation

In this paper, a novel fringe demodulation method for the estimation of phase and its first-order derivative from a closed-fringe interferogram is proposed. The proposed method determines the phase derivatives in both x&y directions from fringe orientation and density. The phase derivatives are subsequently used to determine phase values using a novel simplified phase tracker. In the phase tracking model, the complexity of the cost function is reduced using predetermined derivatives so computation time required for phase tracking is reduced considerably. The proposed model is more robust while dealing with saddle points in fringes than the conventional phase tracker model. Hence it does not require any specialized scanning strategy. The proposed method is validated with simulated and experimental fringe patterns (obtained using electronic speckle pattern interferometry and optical holographic interferometry) and a comparison study is carried out with conventional regularized phase tracker. The simulation results show that the proposed method has good accuracy and requires less computation time than existing phase-tracking algorithms. The experimental results demonstrate the robustness of the proposed method against speckle noise and its practical applicability for static and dynamic applications.     

A pseudopotential approach to the superconducting state properties of Cu<Subscript>C</Subscript>Zr<Subscript>100-C</Subscript> binary metallic glasses

The theoretical investigation of the superconducting state properties viz. electron-phonon coupling strength λ, Coulomb pseudopotential μ*, transition temperature T _C, isotope effect exponent α and effective interaction strength N ₀ V of ten binary Cu_CZr_100-C (C = 25–60 at%) metallic glasses is performed, using Ashcroft’s empty core model potential. Five local-field correction functions proposed by Hartree (H), Taylor (T), Ichimaru-Utsumi (IU), Farid et al. (F) and Sarkar et al. (S) are used to study the screening influence on the aforesaid properties. It is shown that the electronphonon coupling strength λ and the transition temperature T _C are quite sensitive to the selection of the local-field correction functions, whereas the Coulomb pseudopotential μ*, isotope effect exponent α and effective interaction strength N ₀ V show a weak dependence on the local-field correction functions. The values of T _C obtained from the H-local-field correction function are found to be in qualitative agreement with available theoretical or experimental data and show almost linear behavior with respect to the concentration C of Cu. The present results are shown to be in good agreement with other available theoretical or experimental data. The obtained results confirm the existence of the superconducting phase in the metallic glasses.     

Angular dependence of screen speckle and fiber speckle of coupled output of nine high-power blue laser diodes through a multi-mode fiber

Angular dependence of speckle contrast of speckle pattern projected out of a multi-mode fiber connected to a high-power blue laser module is investigated. The laser module has nine high-power InGaN/GaN blue laser diodes arranged in a three-by-three array. Each of the arrayed laser diodes have slightly different incident angle to the fiber. We have successfully extracted the fine screen speckle pattern from the projected pattern mixed up with the coarse fiber speckle pattern by processing the measured data. It is found that the speckle contrast of the both screen and fiber speckles are larger around the center area where the guided-light component closest to the paraxial direction is projected. This is because the output of the center laser in the array is likely to couple into the paraxial mode more than the rest. Speckle contrast behaviors when applying the speckle reduction methods, fiber vibration, diffuser, and spinning diffuser are also investigated.     

Enhanced wavefront reconstruction by random phase modulation with a phase diffuser

A phase retrieval technique for enhanced wavefront reconstruction using random phase modulation and a phase diffuser is proposed. The speckle field generated is sampled at multiple axially displaced planes and the speckle patterns are used in an iterative algorithm based on the optical wave propagation in free space. The presentation of this technique is carried out using two setups. In the first setup, a diffuser plate is placed at the image plane of a metallic test object. The benefit of randomizing the phase of the object wave is the enhanced intensity recording due to high dynamic range of the diffusely scattered beam. The use of demagnification optics will also allow the investigations of relatively large objects. In the second setup, a transparent object is illuminated using a wavefront with random phase and constant amplitude by positioning the phase diffuser close to the object. The benefit of phase-only modulation is the increased resolution of the phase structures of the transparent test objects.     

Phase equilibria in III–V quaternary systems—application to Al-Ga-P-As

A method is given to calculate liquidus-solidus phase diagrams involving quaternary III–V solid solutions of the type A_xB_{1 ? x}C_yD_{1 ? y}. The calculation treats the mixture of A and B atoms on the group III sublattice and C and D atoms on the group V sublattice as strictly regular and the quaternary liquid solution as simple. The input parameters for the calculation are obtained from existing analyses of the binary and ternary boundaries of the phase diagram.Experimental liquidus and solidus data along several Al isoconcentration curves on the 900 ° and 1000 °C isotherm surface are presented for the Al-Ga-P-As system. The liquidus data are obtained by liquid observation and saturation techniques and solidus compositions determined on self-nucleated cyrstals and on mixed crystal layers grown on GaP substrates. The experimental results are consistent with the calculated phase diagram for this system.     

On the critical non-additivity driving segregation of asymmetric binary hard sphere fluids

A previously proposed version of thermodynamic perturbation theory, appropriate for singular pair interactions between particles, is applied to binary mixtures of hard spheres with non-additive diameters. The critical non-additivity Δ_C required to drive fluid–fluid phase separation is determined as a function of the ratio ξ ≤ 1 of the diameters of the two species. Δ_C(ξ) is found to decrease with ξ and to go through a minimum for ξ ? 0.015 before increasing sharply as ξ → 0, irrespective of the total packing-fraction η of the mixture. These results are the basis of an estimate of the range of size ratios for which a binary mixture of additive hard spheres exhibit a fluid–fluid miscibility gap. This range is conjectured to be 0.01 ? ξ ? 0.1.     

Magnetostructural phase transitions in manganese arsenide single crystals

The effect of an external magnetic field with a strength up to 140 kOe on the phase transitions in manganese arsenide single crystals has been investigated. The existence of unstable magnetic and crystal structures at temperatures above the Curie temperature T _C = 308 K has been established. The displacements of manganese and arsenic atoms during the magnetostructural phase transition and the shift in the temperature of the first-order magnetostructural phase transition in a magnetic field have been determined. It has been shown that the magnetocaloric effect in a magnetic field of 140 kOe near the Curie temperature T _C is equal to ??T ?? 13 K. A model of the superparamagnetic state in MnAs above the temperature T _C has been proposed using the data on the magnetic properties and structural transformation in the region of the first-order magnetostructural phase transition. It has been demonstrated that, at temperatures close to T _C, apart from the contribution to the change in the entropy from the change in the magnetization there is a significant contribution from the transformation of the crystal lattice due to the magnetostructural phase transition.     

Computational materials design of filled tetrahedral compound magnetic semiconductors

Based on first-principles calculations within the density functional theory, materials design of filled tetrahedral compound magnetic semiconductors is proposed. By using the Korringa–Kohn–Rostoker coherent potential approximation, electronic structures of Mn-doped LiZnAs, LiZnP and LiZnN are calculated. First, by estimating free energy, phase diagrams of these systems are predicted. It is shown that these systems are phase separating systems and favor spinodal decomposition. However, by introducing Li vacancies, spinodal decomposition is strongly suppressed and Mn can be doped up to high concentration. Moreover, the introduced Li vacancies induce ferromagnetic interaction between Mn and thus we can expect high Curie temperature (T_C) in these systems. To see the chemical trend, electronic structure and T_C of Li(Zn, Cr)As are also calculated.     

利用动态散斑实现体全息存储的新型复用技术

本文提出了一种新型散斑全息存储技术,它是在体全息存储参考光路中加入一随机相位板并通过其移位导致被参考光照明的位置发生变化,利用在存储介质上产生的动态散斑实现多重全息存储.基于动态散斑互相关和衍射理论导出了相应的理论模型,给出了参考光散斑尺雨寸对反映存储密度的复用选择性影响的计算分析和实验结果,从而表明该技术可方便地用于提高系统的存储密度.     

Phase diagram calculations in glass-forming systems—I: Theory

The theory of regular associated solutions is assumed to deal with the formation of molecular species or chemical complexes of general formula A_pB_q, in a liquid phase. Two approximate treatments are developed, depending on the association strength, in order to treat binary and ternary systems. The solid-liquid equilibrium equations for a ternary system containing A_pB_q and A_rC_s complexes are calculated. The success of these treatments for glass-forming liquids is discussed.     

Assessment of speckle-pattern quality in digital image correlation based on gray intensity and speckle morphology

In digital image correlation (DIC), speckle patterns are generated on the surface of a specimen to resolve uniqueness issues. Thus, speckle patterns significantly affect the accuracy of image correlation. To assess the quality of speckle patterns, the standard deviation of gray intensities within each speckle (SDGIS) is introduced as a new metric. On the basis of the cumulative distribution of SDGIS, speckle-pattern quality measurement (ρ) is proposed, which integrates the features of gray intensity and speckle morphology. Twelve speckle patterns are generated by changing the spraying time and nozzle sizes of an airbrush because these are associated with the speckle volume fraction and speckle size, respectively. In addition, three displacement fields are used to investigate the effects of speckle patterns on the accuracy of the DIC results. For the 12 speckle images associated with the three displacement fields, the correlation results demonstrate that the proposed speckle-pattern quality measurement is inversely proportional to the averaged error of the subset method. This is statistically confirmed by evaluating the correlation coefficient and p-value. Furthermore, the error of the subset method is more affected by speckle patterns than the subset size when the subset size is sufficiently large.     

In situ high pressure phase transition of alcohol intercalated zirconium phosphate observed by synchrotron X-ray scattering

Measurements made on the SAXS beamline at Sincrotrone Elettra in Trieste indicated that a phase transition in which the alkanol chains undergo a change from an all trans-conformation to a conformation in which the O–C₁–C₂–C₃ torsion angle changes from 180 to 136° could be induced by a pressure change. p–T phase diagrams of 1-octanol, 1-nonanol, and 1-decanol intercalated alpha zirconium hydrogenphosphate were constructed. From them, the existence of both phases with different basal spacings is obvious. It can be deduced from the comparison of the data for the 1-octanol and 1-nonanol intercalates that the pressure at which this transition occurs, decreases with increasing length of the alkanol chain.