Guests Like Gear Levers: Donor Binding to Coordinatively Unsaturated Metal Sites in MIL-101 Controls the Linker′s Rotation

We present investigation of the effect of electron-donor guests on framework mobility in the metal–organic framework (MOF) MIL-101(Cr) monitored by solid state ²H NMR spectroscopy. In a guest-free material, the mobile phenylene fragments of the terephthalate (TP) linkers populate two fractions with notably different kinetic parameters for torsional motion. Two fractions of rotational motion are indicative of non-equivalence of TP linker binding to the Cr₃O trimer, the primary building unit of the MIL-101 framework. It is established that the interaction of the guest molecules with coordinatively unsaturated metal sites (CUS) of the MOF dramatically decreases torsional barriers for the linker motions, enhancing the rotation rate. This result is opposite to a more conventional slowing down effect on the linker rotation of the guests not selectively interacting with the adsorption sites inside the framework of the MOFs. The effect of coordination on both the torsional barrier and the rotation rate depends notably on the particular guest interacting with the CUS. The found effects of the guest on the rotational motion represent a basis for developing the strategy for ruling and controlling the linker rotation in MOFs with CUS. It is shown that if water occupies CUS, another guest (tert-butanol, cyclohexanone) fails to competitively coordinate to the site.     

New Donor‐Functionalized Cp Ligands: Synthesis and Complexation Behaviour of Quinoxalyl and Benzothiadiazolyl Systems

Sodium cyclopentadienide reacts as nucleophile with 4,7‐dibromo‐2,1,3‐benzothiadiazole (BTZ) and leads to the new donor‐functionalized ligand Cp^BTZ. Related quinoxalyl Cp systems have been prepared using Pd‐catalyzed coupling with zincated Cp‐metal complexes. The new ligands comprise two N‐donor atoms; one of them is located in a distal position relative to the metal centre so that it cannotcoordinate in a chelating manner. With Cp^BTZ ligand derivatives severalmetal complexes have been synthesized. The new chromium(III) complex Cp^BTZCrCl₂ ( 12 ) becomes upon activation an active catalyst for the polymerization of ethylene. Relying on DFT calculations and analysis of spin‐density distribution combined with paramagnetic NMR data a chelating coordination of the Cp^BTZ ligand is feasible in 12 .     

trans‐[1,3‐Bis(2,4,6‐trimethylphenyl)imidazolidin‐2‐ylidene]dichlorido(triphenylphosphine‐κP)palladium(II)

The title complex, [PdCl₂(C₂₁H₂₆N₂)(C₁₈H₁₅P)], shows slightly distorted square‐planar coordination around the Pd^II metal centre. The Pd—C bond distance between the N‐heterocyclic ligand and the metal atom is 2.028 (5) Å. The dihedral angle between the two trimethylphenyl ring planes is 36.9 (2)°.     

On the cation–π capabilities of small all sp2-carbon host structures. Evaluation of [6.8]3cyclacene from relativistic DFT calculations

Cation–π interactions are noncovalent forces with essential roles in the stability of protein structures, molecular recognition, and host–guest chemistry. In this work, we discuss the formation of cation–π complexes involving one of the smallest characterized nanobelts to date, given [6.8]₃cyclacene, by using relativistic DFT-D calculations. Such nanobelt exhibits a noteworthy all-sp² carbon backbone, leading to a rigid and confined host framework. Our results reveal that the inclusion of representative cations, such as Ag⁺ and Sn²⁺, appears to be plausible, revealing that it is feasible to obtain these compounds experimentally. Such systems involves two contrasting coordination modes, where the Ag⁺ cation remains coordinated in the upper face of the nanobelt, whereas the Sn²⁺ is able to be located at the center of the structure. In addition, the coordination of isoelectronic Cd²⁺ and In⁺ was also discussed. Moreover, the bonding characteristics of the resulting cation–π interaction show that the π-orbitals from the nanobelt 1 are able to moderate the charge transfer, according to the selected cation, which can be seen as an interesting strategy to tune the amount of charge of the π-backbone in nanobelts. We envisage that the use of more rigid host in the formation of cation–π interactions will be beneficial to gain a better understanding about the metal coordination and also to tune the capabilities of related nanobelts or nanotubes sections.     

The Syntheses and crystal structures of trans-dichlorobis (10-thiabenzo-15-crown-5)-palladium(Ⅱ)and trans-dichlorobis-(10-selenabenzo-15-crown-5)palladium(Ⅱ)

The preparation and X-ray crystal structures of the adducts of 10-thiabenzo-15-crown-5 and 10-selenabenzo-15-crown-5 with PdCl2 are reported. [PdCl2(C14H20O4S)2] (1): or-thorhombic, space group Pbca with cell dimensions of a=17.285(5), 6=8.354(3), c=21.689(4) A, K=3131.9 A3, Z=4;R=0.0330 for 2301 reflections with I > 3o(I), [PdCl2(C14H2oO4Se)2] (2): monoclinic, space group P21/n with cell dimensions of a=18.928(4), b=8.912(3), c=9.813(2) A, β=96.90(2)0, V=1643.4 A3, Z=2; R=0.0289 for 2617 reflections with I> 3σ(I), Both complexes are monomeric, square-planar palladiurn(Ⅱ) compounds with the Pd(Ⅱ) ion situating on a crystal-lographic inversion centre, and the crown ligands all adopt the axial coordination with the Pd-S bond of 2.3233(7) A and the Pd-Se bond of 2.4357(3) A. Their complexing characteristics are discussed in brief.     

A Soft Copper(II) Porous Coordination Polymer with Unprecedented Aqua Bridge and Selective Adsorption Properties

Herein, the synthesis, crystal structure, and full characterization of a new soft porous coordination polymer (PCP) of ([Cu₂(dmcapz)₂(OH₂)]DMF_1.5)_n ( 1 ) formulation, which is easily obtained in the reaction of CuX₂ (X=Cl, NO₃) salts with 3,5‐dimethyl‐4‐carboxypyrazole (H₂dmcapz) is present. Compound 1 shows a copper(II) dinuclear secondary building unit (SBU), which is supported by two pyrazolate bridges and an unprecedented H₂O bridge. The dinuclear SBUs are further bridged by the carboxylate ligands to build a diamondoid porous network. The structural transformations taking place in 1 framework upon guest removal/uptake has been studied in detail. Indeed, the removal of the bridging water molecules gives rise to a metastable evacuated phase ( 1 b ) that transforms into an extremely stable porous material ( 1 c ) after freezing at liquid‐nitrogen temperature. The soaking of 1 c into water allows the complete and instantaneous recover of the water‐exchanged material ( 1 a′ ). Remarkably, 1 b and 1 c materials possess structural bistability, which results in the switchable adsorptive functions. Therefore, the gas‐adsorption properties of both materials have been studied by means of single‐component gas adsorption isotherms as well as by variable‐temperature pulse‐gas chromatography. Both materials present permanent porosity and selective gas‐adsorption properties towards a variety of gases and vapors of environmental and industrial interest. Moreover, the flexible nature of the coordination network and the presence of highly active convergent open metal sites confer on these materials intriguing gas‐adsorption properties with guest‐triggered framework‐breathing phenomena being observed. The plasticity of Cu^II metal center and its ability to form stable complexes with different coordination numbers is at the origin of the structural transformations and the selective‐adsorption properties of the studied materials.     

Syntheses,characterization and anti‐microbial activities of palladium(II) and palladium(IV) complexes of 3,10‐C‐meso‐Me8[14]diene (L1) and its reduced isomeric anes (LA,LB and LC). Crystal and molecular structure of [PdL1][Pd(SCN)4]

The reactions of 3,10‐C‐meso‐3,5,7,7,10,12,14,14‐octamethyl‐1,4,8,11‐tetraazacyclotetradecadiene, L¹, and two isomers (L_B and L_C, differing in the orientation of methyl groups on the chiral carbon atoms) of its reduced form with PdCl₂ and K₂[Pd(SCN)₄], produce square‐planar tetrachloro‐ and tetrathiocyano‐palladium(II) complexes of general formulae [PdL′][PdCl₄] and [PdL′][Pd(SCN)₄] (L′ = L¹, L_B and L_C), respectively. By contrast, the third ane isomer, L_A, upon reaction with the same reagents, PdCl₂ and K₂[Pd(SCN)₄], formed octahedral tetrachloro‐ and tetrathiocyanato‐palladium(IV) complexes [PdL_ACl₂]Cl₂ and [PdL_A(SCN)₂](SCN)₂, respectively. The [PdL′][PdCl₄] and [PdL_ACl₂]Cl₂ complexes undergo substitution reactions with KSCN to form square‐planar and octahedral tetrathiocyanato complexes [PdL′][Pd(SCN)₄] and [PdL_A(SCN)₂](SCN)₂, respectively. All complexes have been characterized on the basis of analytical, spectroscopic, conductometric and magnetochemical data. The anti‐fungal and anti‐bacterial activities of these complexes have been studied against some phytopathogenic fungi and bacteria. The crystal structure of [PdL¹][Pd(SCN)₄] has been confirmed by X‐ray crystallography and shows with square‐planar PdN₄ and PdS₄ geometries [monoclinic, space group C2/c, a = 17.884(3) Å, b = 14.734(2) Å, c = 11.4313(18) Å, β = 104.054(5)° ]. Copyright © 2008 John Wiley & Sons, Ltd.     

Effect of Bulkiness on Reversible Substitution Reaction at MnII Center with Concomitant Movement of the Lattice DMF: Observation through Single‐Crystal to Single‐Crystal Fashion

The porous coordination polymer ({[Mn(L)H₂O](H₂O)_1.5(dmf)}_n, 1 ) (DMF=N,N‐dimethylformamide) exhibits variety of substitution reactions along with movement of lattice DMF molecule depending upon bulkiness of the external guest molecules. If pyridine or 4‐picoline is used as a guest, both lattice and coordinated solvent molecules are simultaneously substituted (complexes 6 and 7 , respectively). If a bulky guest like aniline is used, a partial substitution at the metal centers and full substitution at the channels takes place (complex 8 ). If the guest is 2‐picoline (by varying the position of bulky methyl group with respect to donor N atom), one Mn^II center is substituted by 2‐picoline, whereas the remaining center is substituted by a DMF molecule that migrates from the channel to the metal center (complex 9 ). Here, the lattice solvent molecules are substituted by 2‐picoline molecules. For the case of other bulky guests like benzonitrile or 2,6‐lutidine, both the metal centers are substituted by two DMF molecules, again migrating from the channel, and the lattice solvent molecules are substituted by these guest molecules (complex 10 and 11 , respectively). A preferential substitution of pyridine over benzonitrile (complex 12 ) at the metal centers is observed only when the molar ratio of PhCN:Py is 95:5 or less. For the case of an aliphatic dimethylaminoacetonitrile guest, the metal centers remain unsubstituted (complex 13 ); rather substitutions of the lattice solvents by the guest molecules take place. All these phenomena are observed through single crystal to single crystal (SC–SC) phenomena.     

Trichloropalladate(II) Complexes with Pyridine Ligands – Molecular Structure and Conformational Analysis of [K(18C6)][PdCl3(py)]

[K(18C6)]₂[Pd₂Cl₆] ( 1 ) (18C6 = 18‐crown‐6) was found to react with pyridines in a strictly stoichiometric ratio 1 : 2 in methylene chloride or nitromethane to yield trichloropalladate(II) complexes [K(18C6)][PdCl₃(py*)] (py* = py, 2a ; 4‐Bnpy, 2b ; 4‐tBupy, 2c ; Bn = benzyl; tBu = tert‐butyl). The reaction of 1 with pyrimidine (pyrm) in a 1 : 1 ratio led to the formation of the pyrimidine‐bridged bis(trichloropalladate) complex [K(18C6)]₂[(PdCl₃)₂(μ‐pyrm)] ( 3 ). The identities of the complexes were confirmed by means of NMR spectroscopy (¹H, ¹³C) and microanalysis. The X‐ray structure analysis of 2a reveals square‐planar coordination of the Pd atom in the [PdCl₃(py)]^? anion. The pyridine plane forms with the complex plane an angle of 55.8(2)°. In the [K(18C6)]⁺ cation the K⁺ lies outside the mean plane of the crown ether (defined by the 6 O atoms) by 0.816(1) Å. There are tight K···Cl contacts between the cation and the anion (K···Cl1 3.340(2) Å, K···Cl2 3.166(2) Å). To gain an insight into the conformation of the [PdCl₃(py)]^? anion, DFT calculations were performed showing that the equilibrium structure ( 6eq ) has an angle between the pyridine ligand and the complex plane of 35.3°. Rotation of the pyridine ligand around the Pd–N vector exhibited two transition states where the pyridine ligand lies either in the complex plane ( 6TS _pla, 0.87 kcal/mol above 6eq ) or is perpendicular to it ( 6TS _per, 3.76 kcal/mol above 6eq ). Based on an energy decomposition analysis the conformation of the anion is discussed in terms of repulsive steric interactions and of stabilizing σ and π orbital interactions between the PdCl₃^? moiety and the pyridine ligand.     

Palladium(II) Complexes of N-(2-Thienylmethylidene)aniline Derivatives

Coordination reactions of N-(2-thienylmethylidene)aniline derivatives, L, with PdCl₂ or [PdCl₄]^2? in ethanol yield stable complexes of the type trans-(L)₂PdCl₂ with the azomethine nitrogen atoms as σ donors. These are not readily convertible to othor-palladated complexes. An X-ray crystallographic study of the complex (L₂)₂PdCl₂ reveals a centrosymmetric geometry. The structure is in the triclinic space group $ {\rm P}\bar 1 $ with a = 8.633(2) Å, b = 12.759(3) Å, c = 8.398(2) Å, α = 96.65(5)°, β = 111.47(5)*, γ= 101.28(6)°, and Z = 1. The final R factor is 0.043 (Rw = 0.044) for 2396 observed reflections. There is no real bonding between a thiophene sulfur atom and a central palladium ion. However, a long distance interaction between S and Pd does exist.     

1,3-diallyl-5-[ω-(diphenylphosphino)alkyl] isocyanurates in reactions of complex formation with palladium(ii) dichloride

The reactions of phosphine derivatives of diallyl isocyanurates with palladium(ii) dichloride lead to the formation of complexes, whose structure, composition, and stability depend on the length of the methylene chain between the isocyanurate and diphenylphosphine fragments in the ligand. 1,3-Diallyl-5-[5′-(diphenylphosphino)pentyl and 10′-(diphenyl-phosphino)decyl] isocyanurates with PdCl₂ form monomeric L₂PdCl₂ trans-complexes in which P atoms of the ligands participate in coordination with the metal. 1,3-Diallyl-5-[2′-(diphenylphosphino)ethyl] isocyanurate with PdCl₂ forms a dimeric (LPdCl₂)₂ complex, which decomposes in a solution to the monomer including solvent molecule into the coordination sphere of the metal. The reactions of 1,3-diallyl-5-[4′-(diphenylphosphino)butyl] isocyanurate and 1,3-diallyl-5-[6′-(diphenylphosphino)hexyl] isocyanurate with PdCl₂ give monomeric chelate LPdCl₂ complexes in which one of the allyl groups of the isocyanurate cycle participates in coordination with the central ion along with the phosphorus atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1859–1865, September, 1998.     

Pd Uptake and H2S Sensing by an Amphoteric Metal–Organic Framework with a Soft Core and Rigid Side Arms

Molecular components of opposite character are often incorporated within a single system, with a rigid core and flexible side arms being a common design choice. Herein, molecule L has been designed and prepared featuring the reverse design, with rigid side arms (arylalkynyl) serving to calibrate the mobility of the flexible polyether links in the core. Crystallization of this molecule with Pb^II ions led to a dynamic metal–organic framework (MOF) system that not only exhibits dramatic, reversible single‐crystal‐to‐single‐crystal transformations, but combines distinct donor and acceptor characteristics, allowing for substantial uptake of PdCl₂ and colorimetric sensing of H₂S in water.     

A Perylene Bisimide Cyclophane as a “Turn‐On” and “Turn‐Off” Fluorescence Probe

A rigid, covalently linked perylene‐3,4:9,10‐tetracarboxylic acid bisimide (PBI) cyclophane was synthesized by imidization of a bay‐substituted perylene bisanhydride with p‐xylylenediamine. The interchromophoric distance of approximately 6.5 Å establishes an ideal rigid cavity for the encapsulation of large aromatic compounds such as perylene and anthracene with binding constants up to 4.6×10⁴ M ^?1 (in CHCl₃). For electron‐poor guest molecules, the complexation process is accompanied by a significantly increased fluorescence, whereas the emission intensity is dramatically quenched by more electron‐rich guests because of the formation of charge‐transfer complexes. Furthermore, the influence of the PBI core twist on the binding constant results in a remarkable selectivity towards more flexible aromatic guest molecules.     

Palladium(II) Complexes with the Mixed‐Donor Ligand CH3S‐(CH2)3‐PPh2 Crystal Structures of [PdCl2{CH3S‐(CH2)3‐PPh2}n](n = 1, 2)

The phosphorus‐sulfur ligand 1‐(methylthio)‐3‐(diphenylphosphino)‐propane (S‐P3) has been synthesized and characterized by ¹H NMR and ¹³C NMR. Reactions of S‐P3 with [PdCl₂(PhCN)₂] afforded the complexes [PdCl₂(S‐P3)] ( I ) and [PdCl₂(S‐P3)₂] ( II ), in which S‐P3 acts as a bidentate and monodentate ligand, respectively. Compound I crystallizes in monoclinic space group P2₁/n (No. 14) with cell dimensions: a = 8.589(3), b = 15.051(3), c = 17.100(3)Å, β = 102.91(2)°, V = 2154.7(9)ų, Z = 4. Likewise, compound II crystallizes in monoclinic space group P2₁/n (No. 14) with a = 9.993(5), b = 8.613(4), c = 18.721(5)Å, β = 90.18(3)°, V = 1611.3(12)ų, Z = 2. Compound II has a trans square planar configuration with only the P‐site of the ligand bonded to the palladium atom.     

Reversible Guest Uptake/Release by Redox‐Controlled Assembly/Disassembly of a Coordination Cage

Controlling the guest expulsion process from a receptor is of critical importance in various fields. Several coordination cages have been recently designed for this purpose, based on various types of stimuli to induce the guest release. Herein, we report the first example of a redox‐triggered process from a coordination cage. The latter integrates a cavity, the panels of which are based on the extended tetrathiafulvalene unit (exTTF). The unique combination of electronic and conformational features of this framework (i.e. high π‐donating properties and drastic conformational changes upon oxidation) allows the reversible disassembly/reassembly of the redox‐active cavity upon chemical oxidation/reduction, respectively. This cage is able to bind the three‐dimensional B₁₂F₁₂^2? anion in a 1:2 host/guest stoichiometry. The reversible redox‐triggered disassembly of the cage could also be demonstrated in the case of the host–guest complex, offering a new option for guest‐delivering control.     

Selective Host–Guest Interactions of a Transformable Coordination Capsule/Tube with Fullerenes

An M₂L₄ coordination capsule or an M₂L₂ coordination tube was selectively formed by the combination of Hg^II hinges and bent bispyridine ligands. The two structures reversibly interconvert at room temperature in response to modulation of the metal‐to‐ligand ratio and exhibit different host–guest interaction behavior. The capsule alone encapsulates large spherical molecules, fullerenes C₆₀ and C₇₀, and the bound guests are released upon capsule‐to‐tube transformation by the simple addition of metal ions.     

A Zn(II)-Based Sql Type 2D Coordination Polymer as a Highly Sensitive and Selective Turn-On Fluorescent Probe for Al3+

A luminescent coordination polymer with the overall formula {[Zn(tr₂btd)(bpdc)]∙DMF}_n (where tr₂btd = 4,7-di(1H-1,2,4-triazol-1-yl)-2,1,3-benzothiadiazole; bpdc = 4,4′-biphenyldicarboxylate) was synthesized and characterized by single-crystal and powder X-ray diffraction, thermogravimetric, infrared spectroscopy, and elemental analyses. Luminescent properties of the obtained compound were studied in detail both in the solid state and as a suspension in N,N-dimethylacetamide (DMA). It was found that {[Zn(tr₂btd)(bpdc)]∙DMF}_n exhibits bright turquoise luminescence with excellent quantum efficiency and demonstrates turn-on fluorescence enhancement effect upon soaking in DMA Al³⁺ solution. Fluorescence titration experiments were carried out and the detection limit for Al³⁺ ions was calculated to be 120 nM, which is among the lowest reported values for similar materials. Moreover, compound demonstrated excellent selectivity and reusability, and the mechanism of the response is discussed. These results indicate that {[Zn(tr₂btd)(bpdc)]∙DMF}_n is a promising probe for sensitive fluorescent Al³⁺ detection.     

Structure and EPR spectra of binuclear copper(II) complexes with acyldihydrazones of benzenedicarboxylic acids and 5-substituted 2-hydroxyacetophenones

Binuclear copper(II) complexes with acyldihydrazones of 1,3- or 1,4 benzenedicarboxylic acid and 5-methyl- or 5-bromo-2-hydroxyacetophenone in which coordination polyhedra are connected by an aromatic bridge have been synthesized and studied. The structure of the copper(II) complex with diacylhydrazone of isophthalic acid and 2-hydroxy-5-methylacetophenone (H₄L) of composition [Cu₂L · 3Py] was studied by X-ray diffraction. The crystals are monoclinic: a = 12.1996(12) Å, b = 17.7295(17) Å, c = 17.9339(17) Å, β = 109.7450(10)°, space group P2₁/n, Z = 4. The complex is of the “dimer of dimers” type and contains two binuclear subunits that bind together into a centrosymmetric dimer owing to the coordination of the copper cation to the phenoxyl oxygen atom of a neighboring binuclear molecule to form the Cu₂O₂ moiety, in which the copper atoms are 3.409 Å apart. The distance between the copper(II) cations in the binuclear subunit is 8.56 atoms (2N + O) of the doubly deprotonated acylhydrazone moiety and the nitrogen atom of the pyridine molecule. One of the copper cation is additionally coordinated to an extra pyridine molecule so that its coordination sphere is completed to a tetragonal pyramid. The second copper atom is involved in additional interaction with the phenoxyl oxygen atom of the neighboring molecule. The EPR spectra of solutions of the binuclear complexes show an isotropic signal of four HFS lines (g _o = 2.065–2.143, a _Cu = 52.1–66.5 × 10^?4 cm^?1) typical of mononuclear copper(II) complexes.     

Crystal Structure and ESR Study of a Bimetallic Copper/Iron Crown Ether Inclusion Complex

Bimetallic inclusion complexes have been synthesized by a secondary coordination interaction between the guest complex [Fe(η⁵-C₅H₅)(CO)₂(NH₃)][PF₆] and copper(II) complex 1a or nickel(II) complex lb containing crown-ether hosts. The X-ray crystal-structure analysis established that the Cu,Fe inclusion complex 2 crystallize as a centrosymmetric dimer with a Cu? Cu separation of 3.73 Å and a novel out-of-plane Cu? N interaction. The magnetic parameters for 2 were obtained by ESR and ENDOR spectroscopy. ESR susceptibility measurements down to 6 K exclude the presence of any antiferromagnetic coupling interaction between the Cu^IIcenters of the dimer.     

Synthesis and structure of palladium complexes [Ph3PhCH2P]+[PdCl3(DMSO)]− · DMSO, [Ph4P]+[PdCl3(DMSO)]−, and [Ph4Sb(DMSO)]+[PdCl3(DMSO)]−

[Ph₃PhCH₂P]⁺[PdCl₃(DMSO)]^? · DMSO (I), [Ph₄P]⁺[PdCl₃(DMSO)]^? (II), and [Ph₄Sb(DMSO)]⁺[PdCl₃(DMSO)]^? (III) complexes have been synthesized via the reaction of palladium chloride with equimolar amounts of triphenylbenzylphosphonium chloride, tetraphenylphosphonium chloride, and tetraphenylstibonium chloride, respectively. According to X-ray diffraction data, the cations of complexes I (CPC = 104.90(8)°–111.61(9)°) and II (CPC = 105.12(10)°–111.46(10)°) have slightly distorted tetrahedral structures with P-C bond lengths of 1.786(2)–1.809(2) and 1.791(2)–1.799(2) Å, respectively. The antimony atom in the [Ph₄Sb(DMSO)]⁺ cation has a trigonal bipyramidal surrounding with the dimethyl sulfoxide (DMSO) oxygen atom in an axial position (Sb...O 2.567(2) Å). The palladium atoms in the square mononuclear anions of complexes I, II, and III are tetracoordinate, and Pd-Cl distances are 2.3101(5)–2.3104(5) Å, 2.2950(7)–2.2038(7) Å, and 2.2986(9)–2.3073(9) Å, respectively. The DMSO ligands are coordinated to the palladium atom through the sulfur atom (Pd-S, 2.2318(5) (I), 2.2383(6) (II), and 2.2410(9) Å (III)).