Reaction of Sulfur and Oxygen-Bridged 8-Quinolinolato Trinuclear Molybdenum Cluster [Mo<Subscript>3</Subscript>OS<Subscript>3</Subscript>(qn)<Subscript>3</Subscript>(H<Subscript>2</Subscript>O)<Subscript>3</Subscript>]<Superscript>+</Superscript> with Acetylene Carboxylic Acids

The reaction of a sulfur and oxygen-bridged 8-quinolinolato trinuclear molybdenum cluster [Mo₃OS₃(qn)₃(H₂O)₃]⁺ (3; Hqn = 8-quinolinol) with equimolar amounts of acetylene carboxylic acid, 4-pentynoic acid, 5-hexynoic acid, acetic acid, and pimelic acid gave clusters having μ-carboxylato groups, [Mo₃OS₃(qn)₃(H₂O)(μ-HC≡CCOO)] (6), [Mo₃OS₃(qn)₃(H₂O)(μ-HC≡C(CH₂)₂COO)] (7), [Mo₃OS₃(qn)₃(H₂O)(μ-HC≡C(CH₂)₃COO)] (8), [Mo₃OS₃(qn)₃(H₂O)(μ-CH₃COO)] (4), and [{Mo₃OS₃(qn)₃(C₂H₅OH)}₂(μ-C₇H₁₀O₄)] (5), respectively. X-ray structural analyses, ¹H NMR, and electronic spectra of these clusters made clear that each of the COO⁻ groups of the reagents bridges two Mo atoms in each cluster and that no adduct formation occurred at the sulfurs in the clusters. The reaction of 3 with a large excess-molar amount (50 times) of acetylene carboxylic acid gave [Mo₃OS(μ₃-SCH=C(COOH)S)(qn)₃(H₂O)(μ-HC≡CCOO)] (9) with two molecules of acetylene carboxylic acid, one acting as a carboxylato bridge and the other in adduct formation, as supported by the electronic and ¹H NMR spectra. The corresponding aqua cluster [Mo₃OS₃(H₂O)₉]⁴⁺ (1), on the contrary, reacts with acetylene carboxylic acid to give adduct [Mo₃OS(μ₃-SCH=C(COOH)S)(H₂O)₉]⁴⁺ (2). Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

First heteroleptic Mo<Subscript>3</Subscript>S<Subscript>7</Subscript> clusters containing non-innocent phenanthroline ligands

Reaction of the thiobromide [Mo₃S₇Br₆]²⁻ cluster anion with 5,6-dimethyl-1,10-phenanthroline (Me₂Phen) in solution leads to the substitution of two bromide ligands and the subsequent formation of a new mixed-ligand neutral complex [Mo₃S₇Br₄(Me₂Phen)] (I). Reaction of [Mo₃S₇Br₆]²⁻ with 5,6-dimethyl-1,10-phenanthroline in CH₂Cl₂ followed by treatment of I with Na(Dtc) · 3H₂O (Dtc = diethyldithiocarbamate) results in the new mixed-ligand cluster complex [Mo₃S₇(Dtc)₂(Me₂Phen)]²⁺ (IIa). Slow evaporation of the CHCl₃ solution of the complex in the presence of PF₆⁻ gives crystals of {[Mo₃S₇(Dtc)₂(Me₂Phen)]Br}PF₆ · 3CHCl₃ (II) characterized by X-ray structural analysis. Close contacts S...S result in the formation of cationic dimers {[Mo₃S₇(Dtc)₂(Me₂Phen)]₂}⁴⁺ which form infinite chains through additional S_ax...Br contacts. All compounds were characterized by IR, elemental analysis and ESI-MS. Synthesized complexes represent the first examples of heteroleptic Mo₃S₇ clusters containing phenanthroline ligands.     

Reactivity of triangular oxalate cluster complexes [M<Subscript>3</Subscript>Q<Subscript>7</Subscript>(C<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript>3</Subscript>]<Superscript>2−</Superscript> (M = Mo or W; Q = S or Se)

The reactions of the oxalate complexes [M₃Q₇(C₂O₄)₃]²⁻ (M = Mo or W; Q = S or Se) with Mn^II, Co^II, Ni^II, and Cu^II aqua and ethylenediamine complexes in aqueous and aqueous ethanolic solutions were studied. The previously unknown heterometallic complexes [Mo₃Se₇(C₂O₄)₃Ni(H₂O)₅]·3.5H₂O (1) and K₃{[Cu(en)₂H₂O]([Mo₃S₇(ox)₃]₂Br)}·5.5H₂O (2) were synthesized. In these complexes, the oxalate clusters serve as monodentate ligands. The K(H₂en)₂[W₃S₇(C₂O₄)₃]₂Br·4H₂O salt (3) was isolated from solutions containing Co^II, Ni^II, or Cu^II aqua complexes and ethylenediamine. The reaction of [Mo₃Se₇(C₂O₄)₃]²⁻ with HBr produced the bromide complex [Mo₃Se₇Br₆]²⁻, which was isolated as (Bu₄N)₂[Mo₃Se₇Br₆] (4). Complexes 1–3 were characterized by X-ray diffraction, IR spectra, and elemental analysis. The formation of 4 was detected by electrospray mass spectrometry. Dedicated to Academician G. A. Abakumov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1645–1649, September, 2007.     

Electrochemical reduction and flow detection of iodate on (Bu<Subscript>4</Subscript>N)<Subscript>2</Subscript>Mo<Subscript>6</Subscript>O<Subscript>19</Subscript> self-assembled monolayer

A stable monolayer of the inorganic–organic hybrid polyoxometalate (Bu₄N)₂Mo₆O₁₉, denoted as Mo₆O₁₉, was formed on a sodium-3-mercapto-1-propanesulfonate (MPPS)-covered gold electrode surface, interlaced with an anionic poly(dimethyldiallylammonium chloride) (PDDA) binding layer based on the electrostatic self-assembled (ESA) technique. Electrochemical characterization of the Mo₆O₁₉ self-assembled thin films on the solid surface by cyclic voltammetry and AC impedance spectroscopy revealed a stable and sensitive electrocatalytic response to the reduction of iodate. Iodate was determined amperometrically through a flow injection cell at the modified electrode in the concentration range of 1.0×10^–6 to 1.0×10^–1 M with a detection limit of 8×10^–8 M (signal-to-noise ratio = 3). Performance was improved to meet practical needs compared with previously reported analogues.     

MoS<Subscript>2</Subscript> single slab as a model for active component of hydrodesulfuration catalyst: a quantum chemical study 1. Molecular and electronic structure of Mo<Subscript>12</Subscript>S<Subscript>24</Subscript> macromolecule and its adsorption complex with H<Subscript>2</Subscript>S

The molecular and electronic structure of Mo₁₂S₂₄ macromolecule as the MoS₂ single slab structure was calculated by the density functional theory (DFT) method with the B3P86 hybrid exchange-correlation functional. The results of calculations point to slight relaxation of coordinatively unsaturated Mo and S atoms, which is consistent with the published data. The calculated width of the forbidden band (0.85–0.98 eV) is comparable with the experimental value (1.30 eV) and similar to that obtained from DFT calculations with periodic boundary conditions (0.89 eV). The surface Mo centers in the Mo₁₂S₂₄ macromolecule are more reduced than the internal (Mo^IV) atoms. In order to characterize the adsorption capacity of coordinatively unsaturated Mo centers, a Mo₁₂S₂₄·6H₂S adsorption complex was calculated. The structure and energy characteristics of the adsorption complex point to a weak donor-acceptor interaction of the π-lone pair of H₂S molecule with the surface (reduced) Mo centers. The active center of thiophene hydrodesulfuration catalysts is formed as a result of the oxidative addition of hydrogen followed by occlusion of hydrogen into the MoS₂ matrix. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2189–2193, October, 2005.     

Two novel four-coordinated zinc(II) complexes [Zn(dmatrz)<Subscript>2</Subscript>Cl<Subscript>2</Subscript>] and [Zn(dmatrz)<Subscript>2</Subscript>(SCN)<Subscript>2</Subscript>] exhibiting strong blue fluorescent properties

Two novel complexes, [Zn(dmatrz)₂]Cl₂ (1) and [Zn(dmatrz)₂(SCN)₂] (2), have been prepared and characterized by X-ray crystallography, absorption and luminescence spectrometries (dmatrz=3,5-dimethy-4-amino-1,2,4-triazole). The coordination environment of the zinc(II) ions in (1) and (2) has a distorted tetrahedral geometry completed via two independent nitrogen atoms of two triazole ligands and two anions, respectively. Both (1) and (2) show strong blue luminescence properties. Furthermore, (1) displays stronger blue photoluminescence than (2) as the result of different anions (Cl^- and SCN^-) coordinated to the zinc(II) ions.     

Functionalization of one or two methyl groups in the [Cp*<Subscript>2</Subscript>RuBr]<Superscript>+</Superscript>Br<Superscript>−</Superscript> complex in the reaction with bromine

The reaction of [Cp*₂RuBr]⁺Br⁻ with bromine in CH₂Cl₂ (CD₂Cl₂) in an inert atmosphere at room temperature produces the complexes [Cp*Ru(Br)C₅Me₄CH₂Br]⁺Br₃ ⁻ (syn conformer), [Cp*Ru(Br)C₅Me₃(CH₂Br)₂]⁺ (syn and anti conformers), and [Ru(Br)(C₅Me₄CH₂Br)₂]⁺ (syn conformer). All complexes were characterized by ¹H and ¹³C NMR spectroscopy; the former complex, by elemental analysis. These complexes were also prepared by the reaction of [Cp*RuC₅Me₄CH₂]⁺BF₄ ⁻ with bromine in CH₂Cl₂. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2712–2718, December, 2005.     

Second Dissociation Constant of H<Subscript>2</Subscript>Te and the Absorption Spectra of HTe<Superscript>–</Superscript>, Te<Superscript>2–</Superscript> and Te<Subscript>2</Subscript><Superscript>2–</Superscript> in Aqueous Solution

We have measured the second acid dissociation constant, K _2a , at several ionic strengths for hydrogen telluride (H₂Te) using the Charge Transfer to Solvent (CTTS) uv spectra of its anions HTe⁻ and Te²⁻. Since it is produced in our solutions, we have also determined the spectra of Te₂ ²⁻ both in the uv and in the visible regions. At 25 ^∘C, K _2a = (1.28 ± 0.02) × 10⁻¹² by extrapolation to zero ionic strength. Its value at an ionic strength equal to 0.5 mol.dm^-3 was estimated to be (8.7 ± 0.2) × 10⁻¹². The solution thermodynamics of these species are also discussed and comparisons are made to related acids.     

A New Molybdophosphate Constructed From {Mo<Stack><Subscript>2</Subscript><Superscript>V</Superscript></Stack>O<Subscript>4</Subscript>(H<Subscript>2</Subscript>O)<Subscript>6</Subscript>}<Superscript>2+</Superscript> and 1-Hydroxyethylidenediphosphonate

A new molybdophosphate (NH₄)₈{Mo₂^VO₄[(Mo₂^VIO₆)CH₃C(O)(PO₃)₂]₂}·14H₂O (1), has been synthesized by the reaction of {Mo₂^VO₄(H₂O)₆}²⁺ fragments with 1-hydroxyethylidenediphosphonate (hedp HOC(CH₃)(PO₃H₂)₂), and it is characterized by ³¹P NMR, IR, UV, element analysis, TG and single-crystal X-ray analysis. The structure analysis reveals that the polyoxoanion can be described as two {(Mo₂^VIO₆)(CH₃C(O)(PO₃)₂} units connected by a {Mo₂^VO₄}²⁺ moiety. In the structure, the six Mo atoms are arranged into a new “W-shaped” structure, which represents a new kind of molybdophosphate.     

The phase diagram of V<Subscript>2</Subscript>O<Subscript>5</Subscript>-MoO<Subscript>3</Subscript>-Ag<Subscript>2</Subscript>O system

The results concerning the synthesis, structure and thermal properties of V₂O₅-MoO₃-Ag₂O samples in the molybdenum rich region of ternary system are presented in the form of quasi-binary systems: β-AgVO₃-β-Ag₂MoO₄, AgVMoO₆-MoO₃, AgVMoO₆-Ag₂Mo₄O₁₃, AgVMoO₆-Ag₂Mo₂O₇, AgVMoO₆-β-Ag₂MoO₄ and also of the system in which at V₂O₅/MoO₃ molar ratio 3:7 the content of Ag₂O was variable. The ternary phase AgVMoO₆ was not described earlier in the literature.     

Geometry and electronic structure of a heterometallic cluster Mo<Subscript>2</Subscript>Mg<Subscript>2</Subscript> in different oxidation states of Mo: a DFT study

Reduction of tetranuclear heterometallic complex Mo₂Mg₂ was simulated using the B3LYP and PBE density functional methods. The results of geometry calculations of the initial complex [Mo^VIO₂Mg(MeOH)₂(OMe)₄]₂ and a partially reduced Mo^V complex are in good agreement with experimental data. The reduced Mo^III complex is characterized by a decrease in the binding energy of aqua ligands. Structural rearrangement of the complex with release of a coordination position at the Mo atoms requires small energy expenditure. One can assume that the reduction of the polynuclear complex causes overcrowding of its coordination sphere, which favors formation of dinitrogen complexes. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 441–457, March, 2008.     

Formation and properties of the Fe<Subscript>8</Subscript>V<Subscript>10</Subscript>W<Subscript>16–x</Subscript>Mo<Subscript>x</Subscript>O<Subscript>85</Subscript> type solid solution

Solid solution phases of a formula Fe₈V₁₀W_16–xMo_xO₈₅ where 0≤x≤4, have been obtained, possessing a structure of the compound Fe₈V₁₀W₁₆O₈₅. It was found on the base of XRD and DTA investigations that these solution phases melted incongruently, with increasing the value of x, in the temperature range from 1108 (x=0) to 1083 K (x=4) depositing Fe₂WO₆ and WO₃. The increase of the Mo⁶⁺ ions content in the crystal lattice of Fe₈V₁₀W₁₆O₈₅ causes the lattice parameters a=b contraction with cbeing almost constant. IR spectra of the Fe₈V₁₀W_16–xMo_xO₈₅ solid solution phases have been recorded.     

Phase transition and thermal decomposition of [Al(DMSO)<Subscript>6</Subscript>]Cl<Subscript>3</Subscript>

Phase transition and thermal decomposition of hexadimethylsulfoxidealuminium chloride were studied by differential scanning calorimetry (DSC), thermogravimetry (TG) and simultaneous differential thermal analysis (SDTA). The gaseous products of the decomposition were on-line identified by a quadrupole mass spectrometer (QMS). In the temperature range of 95–300 K, [Al(DMSO)₆]Cl₃ indicates one phase transition at T _c^h=244.96 K (on heating) and at T _c^c=220.87 K (on cooling). Large thermal hysteresis of the phase transition (∼24 K) indicates its first order character. Large value of transition entropy (ΔS≈40 J mol⁻¹ K⁻¹) suggests its configurational character. Thermal decomposition of the title compound proceeds in four main stages. In the first stage, which starts just above ca. 300 K, the compound loses two DMSO molecules per one formula unit and undergoes into [Al(DMSO)₄]Cl₃. In the second stage, the next three DMSO ligands are released and simultaneously decomposed. The third stage, which continues up to ca. 552 K, is connected with a loss of the last DMSO ligand and the formation of AlCl₃. In the fourth stage AlCl₃ reacts with carbon monoxide that originates from the decomposition of DMSO, and first aluminium oxychloride and next solid Al₂O₃ plus carbon are created.     

Synthesis,structure, and electric properties of oxygen-deficient perovskites Ba<Subscript>3</Subscript>In<Subscript>2</Subscript>ZrO<Subscript>8</Subscript> and Ba<Subscript>4</Subscript>In<Subscript>2</Subscript>Zr<Subscript>2</Subscript>O<Subscript>11</Subscript>

Perovskite phases Ba₃In₂ZrO₈ and Ba₄In₂Zr₂O₁₁ with the nominal concentration of structural oxygen vacancies 1/9 and 1/12, respectively, were synthesized by solid-phase and solution methods. X-ray diffraction showed cubic symmetry of both phases with the unit cell parameter a = 0.4193(2) and 0.4204(3) nm, respectively. The absence of superstructural lines resulted in the conclusion on statistical arrangement of oxygen vacancies. Thermogravimetry and mass spectrometry proved that both phases can reversibly absorb water from gas phase (pH₂O = 2 × 10⁻² atm) with observed correlation between the concentration of oxygen vacancies and amount of absorbed water. The total water amount was up to 0.9 mol per formula unit or, if recalculated for perovskite unit ABO₃, 0.3 and 0.23 mol H₂O, respectively. The temperature curves of coductivity in the atmosphere with various partial water vapor pressures (pH₂O = 3 × 10⁻⁵ and 2 × 10⁻² atm) showed significantly higher conductivity and lower activation energy (0.52 eV) in humid atmosphere due to proton transfer. The proton conductivity is up to 5 × 10⁻⁴ Ohm⁻¹ cm⁻¹ at 300°C for Ba₃In₂ZrO₈ specimen. IR spectrometry showed that protons in the structure exist primarily in OH-groups.     

Effect of heat treatment on electrochromic properties of TiO<Subscript>2</Subscript> thin films

Electrochromic titanium oxide (TiO₂) films were deposited on ITO/glass substrates by chemical solution deposition (CSD). The stock solutions were spin-coated onto substrates and then heated at various temperatures (200–500 °C) in various oxygen concentrations (0–80%) for 10 min. The effects of the processing parameters on the electrochromic properties of TiO₂ films were investigated. X-ray diffraction measurements demonstrated that the amorphous TiO₂ films were crystallized to form anatase films above 400 °C. The electrochromic properties and transmittance of TiO₂ films were measured in 1 M LiClO₄–propylene carbonate (PC) non-aqueous electrolyte. An amorphous 350 nm-thick TiO₂ film that was heated at 300°C in 60% ambient oxygen exhibited the maximum transmittance variation (ΔT%), 14.2%, between the bleached state and the colored state, with a ΔOD of 0.087, Q of 10.9 mC/cm², η of 7.98 cm²/C and x in Li _x ClO₄ of 0.076 at a wavelength (λ) of 550 nm.     

Photochemical substitution of benzene in the iron cyclohexadienyl complex [(η<Superscript>5</Superscript>-C<Subscript>6</Subscript>H<Subscript>7</Subscript>)Fe(η-C<Subscript>6</Subscript>H<Subscript>6</Subscript>)]<Superscript>+</Superscript>

The visible light irradiation of the [(η⁵-C₆H₇)Fe(η-C₆H₆)]⁺ cation (1) in acetonitrile resulted in the substitution of the benzene ligand to form the labile acetonitrile species [(η⁵-C₆H₇)Fe(MeCN)₃]⁺ (2). The reaction of 1 with Bu^tNC in MeCN produced the stable isonitrile complex [(η⁵-C₆H₇)Fe(Bu^tNC)₃]⁺ (3). The photochemical reaction of cation 1 with pentaphosphaferrocene Cp*Fe(η-cyclo-P₅) afforded the triple-decker cation with the bridging pentaphospholyl ligand, [(η⁵-C₆H₇)Fe(μ-η:η-cyclo-P₅)FeCp*]⁺ (4). The latter complex was also synthesized by the reaction of cation 2 with Cp*Fe(η-cyclo-P₅). The structure of the complex [3]PF₆ was established by X-ray diffraction. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2088–2091, November, 2007.     

Crystal structure of Li(H<Subscript>2</Subscript>O)<Subscript>3</Subscript>[GaEdta]

The ethylenediaminetetraacetate complex Li(H₂O)₃[Ga(Edta)] was synthesized and its crystal structure composed of octahedral (Ga(Edta)⁻ anions connected to the Li(H₂O)₃⁺ ion through the oxygen atom was studied. Five of the six hydrogen atoms of water molecules are involved in weak hydrogen bonds with the oxygen atoms of four Ga(Edta)⁻ complexes, the complex anion is hydrogen-bonded to five water molecules. In addition, shortened contacts C(221)–H(22A)…O(112) between the Ga(Edta)⁻ anions were found. As a result, the molecular packing in the crystal is determined by the three-dimensional lace of hydrogen bonds. The results are compared with published data for the lithium salts of Bi(III), Sb(III), Fe(III), Ni(II), and Hg(II) ethylenediaminetetraacetates.     

Cluster compounds [Ca(DMF)6][Mo6Cl14] and [{Ca(OPPh3)4}{Mo6Cl14}]∞: Synthesis, crystal structure, and properties

The [Ca(DMF)₆][Mo₆Cl₁₄] complex (I) was synthesized by reacting octahedral cluster Mo complex (H₃O)₂Mo₆Cl₁₄·6H₂O with the Ca²⁺ cation in DMF. Analogous reaction carried out in the presence of triphenylphosphine oxide Ph₃PO in acetonitrile resulted in [{Ca(OPPh₃)₄}{Mo₆Cl₁₄}] (II). According to X-ray diffraction data, complex I has ionic structure, while the structure of complex II consists of infinite linear chains of the cluster anionic complexes {Mo₆Cl₁₄}²⁻ bonded to the cationic Ca complexes {Ca(OPPH₃)₄}²⁺. Both complexes exhibit intensive luminescence in red and near-IR regions of the spectrum. Original Russian Text ? Zh.S. Kozhomuratova, Yu.V. Mironov, M.A. Shestopalov, Ya.M. Gaifulin, N.V. Kurat’eva, E.M. Uskov, V.E. Fedorov, 2007, published in Koordinatsionnaya Khimiya, 2007, Vol. 33, No. 1, pp. 3–8.     

Synthesis,structure, and electrochemistry of <Emphasis Type="Italic">trans</Emphasis>-[Co<Superscript>III</Superscript>{(BA)<Subscript>2</Subscript>pn}(L)<Subscript>2</Subscript>]ClO<Subscript>4</Subscript> complexes

The structure, spectroscopic, and electrochemical properties of [Co{(BA)₂pn}(L)₂]ClO₄ complexes, where (BA)₂pn = N,N′-bis(benzoylacetone)-1,3-propylenediimine dianion and the two ancillary ligands (L) are pyridine, py (1), and 4-methylpyridine, 4-Mepy (2), have been investigated. These complexes have been characterized by elemental analyses, IR, UV–Vis and ¹H-NMR spectroscopy. The crystal structure of [Co{(BA)₂pn}(py)₂]ClO₄ (1) has been determined by X-ray diffraction. The coordination geometry around cobalt(III) is best described as a distorted octahedron. The electrochemical reduction of these complexes at a glassy carbon electrode in acetonitrile solution indicates that the first reduction process corresponding to Co^III–Co^II is electrochemically irreversible, which is accompanied by the dissociation of the axial N(py)–cobalt bonds. This process becomes quasi-reversible upon the addition of excess py ligands. The second reduction step of Co^II/I shows reversible behavior and is not influenced by the nature of the axial ligands. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Structure and properties of Li<Subscript>2</Subscript>Zn<Subscript>2</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript> crystals activated with copper and chromium ions

Based on the corrected phase diagrams proper growth conditions for Li2Zn2(MoO₄)₃ crystals are selected. Large crystals (up to 100 mm), both impurity-free and activated by transition metal ions (Cu, Cr), are grown by the low-gradient Czochralski method. By the EPR method the charge state and structural position of copper and chromium ions are determined. The performed studies of luminescent properties show that for impurity-free crystals luminescence with λ = 388 nm with a two-exponential luminescence decay with τ₁ = 2 ns and τ₂ = 6 ns is observed at room temperature. At 77 K for both impurity-free crystals and those activated with transition metal ions luminescence with λ = 560 nm and the luminescence lifetime τ = 100 ns is observed, the intensity of luminescence with λ = 560 nm depending on the nature and concentration of transition metal ions. Cation vacancies responsible for the charge compensation of impurity transition metal ions are assumed to be also responsible for low-temperature luminescence.