Lattice phonon mediation of solid state photoreaction in 7-methoxycoumarin crystal: laser Raman spectroscopic study

The photodimerization reaction in 7-methoxycoumarin (7MC) in the crystalline state is shown to be mediated by a lattice phonon. The phonon participation is through a mode softening in the excited state of the crystal on photoirradiation and not via strong exciton—phonon coupling as in generally observed. IR and Raman spectroscopy were used to characterize the reactant and product, and it is confirmed that the reaction occurs by cyclobutane ring formation through the bond of the pyrone ring. Electronic spectroscopy suggests that the exciton—phonon coupling is weak in the monomer crystal.     

Spectroscopic study of solid state photoreaction of di n-propyl ester of dicyano p-phenylenediacrylic acid

Photopolymerization reaction in di n-propyl ester of dicyano p-phenylene diacrylic acid crystal is shown to be mediated by exciton–phonon coupling. Raman phonon spectra suggest that at the initial stage of reaction progress, the reactant and the product form a solid solution. In the later stage, the reactant segregates out and forms its own lattice. The polymer lattice is shown to maintain a good degree of order. Infrared and Raman spectra confirm that the polymerization occurs by cyclobutane ring formation. © 1994 John Wiley & Sons, Inc.     

Phonon mediation of solid state photoreaction: Photodimerization of o -methoxy cinnamic acid

The solid state photodimerization reaction ofo-methoxy cinnamic acid is shown to be mediated by a lattice phonon. The phonon participation, in this case, is through a mode softening and not through strong exciton-phonon coupling as is generally observed. Raman phonon spectroscopy suggests that the reaction is heterogeneous. Infrared spectroscopy has been used to study the internal vibrations of the reactant and the product. Partly presented at the International Laser Science Conference II, 1986 held at Seattle, USA.     

Spectroscopic studies of photochemical reactions in organic solids: Photopolymerization of 1,4 bis[β-pyridyl(2)vinyl] benzene

The laser Raman phonon spectroscopic technique has been used to study the photopolymerization reaction of 1,4 bis[β-pyridyl(2)vinyl] benzene (P2VB). Raman and infrared spectroscopy have been used to study the intramolecular vibrations of the reactant and the product and to characterize them. Absence of any large Stokes' shift between absorption and emission bands of the monomer crystal shows that exciton–phonon coupling is weak, and the reaction is not likely to be phonon mediated. Phonon spectroscopy shows that the reaction proceeds by a heterogeneous mechanism. Sharp phonon bands of the product, however, suggests that the photopoly P2VB lattice is highly ordered.     

Spectroscopic study of solid-state photoreaction in organic crystal: Photopolymerization of dimethyl ester of α,α′-dicyano-p-phenylenediacrylic acid and diethyl ester of p-phenylenediacrylic acid

Raman spectroscopy has been used to study solid-state photopolymerization reactions in dimethyl ester of α,α′-dicyano-p-phenylenediacrylic acid (p-CPAMe) and diethyl ester of p-phenylenediacrylic acid (p-PDAEt). The reactants and products were characterized by infrared and Raman spectroscopy. Excitation and emission spectra suggest that in p-CPAMe exciton–phonon coupling is strong, but in the other monomer it is very weak. Raman phonon spectroscopic study reveal that in both the samples the reaction mechanism is homogeneous in the initial stages. However, in the later stages the reaction becomes heterogeneous in p-PDAEt. In p-CPAMe the lattice becomes disordered with the progress of polymerization and finally becomes amorphous whereas in p-PDAEt the lattice remains highly ordered. © 1992 John Wiley & Sons, Inc.     

Four-center type photopolymerization in the solid state. VII. Photochemical reaction of m-phenylene diacrylic acid dimethyl ester

The photochemical reaction of m-phenylene diacrylic acid dimethyl ester (m-PDA Me) crystals and solutions has been studied to clarify the effects of the molecular shape on four-center type photopolymerization of diolefins. On irradiation, m-PDA Me crystals were converted into amorphous oligomers having more than two kinds of cyclobutane rings with respect to steric configuration. The characteristic oligomer formation is explained by considering a two-step mechanism: topochemical dimer formation in an ordered crystal lattice and subsequent random cycloaddition in a disordered crystal lattice. In m-PDA Me solution, reversible cyclobutane ring formation and cis–trans isomerization take place, depending on the concentration of m-PDA Me in solution and the wavelength of the irradiating light. The multiplicity of reactivity in various states has been established.     

Four-center type photopolymerization in the crystalline state. VI. Kinetic and structural study of the polymerization of p-phenylenediacrylic acid diethyl ester

The effect of temperature on the four-center type photopolymerization has been investigated for p-phenylenediacrylic acid diethyl ester over a wide temperature range including crystal transition point (56°C) and melting point (96°C) of monomer. With the elevation of temperature between ?50 and 15°C, the polymerization rate in the initial stage increased and the degree of polymerization decreased monotonously, while the rate in the later stage decreased above ?25°C. With irradiation at above 25°C, the monomer crystals became sticky, and the polymerization was suppressed at the stage of oligomerization with low conversion. This tendency was enhanced above the crystal transition point, giving mainly dimer in low yield. Above the melting point, only radical polymerization occurred with the aid of oxygen. The steric configuration of the products in the crystalline state was 1,3-trans with respect to the cyclobutane ring. Peaks in NMR spectra of all products were assigned to the protons involved in four compounds up to tetramer. Various results obtained have been interpreted in terms of the change, as a function of temperature, from a topochemical polymerization which proceeds under a control of the monomer lattice to a photoinitiated vinyl-type polymerization in the disordered state. It is concluded that a rigid crystal lattice is indispensable for the four-center type photopolymerization to proceed smoothly.     

Photoreactive polyamides having m- or 1-type dimer moiety derived from 4-(3-oxo-3-phenyl-1-propenyl)benzoic acid derivatives

Photoreactive polyamides having m- or 1 -type cyclobutane moiety were prepared via a topochemical photodimerization of 4-(3-oxo-3-phenyl-1-propenyl)benzoic derivatives,⁴ followed by polycondensation of cyclobutane dicarboxylate derivatives with diamines. From the spectral studies of resulted polyamides compared with the corresponding reference diamides, it was concluded that both types of polyamides were depolymerized photochemically to give the same type of amide derivative having chalcone moiety with a small amount of undefined side reaction. The cyclobutane ring of the m-dimer from 4-(3-oxo-3-phenyl-1-propenyl)benzoic acid in crystal is severely twisted presumably because of the enhanced steric repulsions between two pairs of adjacent substituents. The higher quantum yield of the m-dimer for the photocleavege, compared with that of the 1 -dimer, has been interpreted in terms of such steric repulsions by the strained structure of the m-dimer.     

Phonon spectroscopy of photochemical reactions in organic solids: Photodimerization of 2,6-dimethyl-p-benzoquinone

The Raman phonon spectroscopic study shows that the photodimerization of 2,6-dimethyl-p-benzoquinone. In the solid state is initially a homogeneous reaction but later becomes heterogeneous as the product accumulates. The Ion-temperature electronic absorption spectrum reveals that the reaction is phonon assisted by a polaron formed due to a strong electron- phonon coupling in the cxcited ¹nπ^* state.     

KINETICS OF PHOTODIMERIZATION OF OROTIC ACID IN AQUEOUS MEDIUM

Abstract— Ultraviolet irradiation of orotic acid in aqueous medium leads to the formation of dimers with a cyclobutane ring between the 5,6 bonds of two monomers. These photodimers in turn undergo photodissociation, with the result that an equilibrium is established between photodimerization and photodissociation. The equilibrium point is independent of dose rate, but is appreciably dependent on the irradiation wavelength, pH of the medium (i.e. whether the monomer is in the neutral or anionic form), and initial monomer and oxygen concentrations; the effect of oxygen apparently being to deactivate excited monomers. The kinetics of photodimerization and photodissociation have been examined at different wavelengths and with varying oxygen concentrations at different initial monomer concentrations. The results have been compared with a theoretical model in which it is assumed that a dimer is formed between an excited monomer and second molecule in the ground state, and that oxygen can also react with, and deactivate, an excited monomer. The agreement between the proposed model and the experimental data is reasonably good, and has made possible an estimate of the lifetime of the excited state of orotic acid in aqueous medium, which is about 10^-6 sec.     

Visualizing a Single-Crystal-to-Single-Crystal [2+2] Photodimerization through its Lattice Dynamics: An Experimental and Theoretical Investigation

In homogeneous solid-state reactions, the single-crystal nature of the starting material remains unchanged, and the system evolves seamlessly through a series of solid solutions of reactant and product. Among [2+2] photodimerizations of cinnamic acid derivatives in the solid state, those involving salts of the 4-aminocinnamic acid have been recognized to proceed homogeneously in a “single-crystal-to-single-crystal” fashion by X-ray diffraction techniques. Here the bromide salt of this compound class is taken as a model system in a Raman spectroscopy study at low wavelengths, to understand how such a mechanism defines the trend of the crystal lattice vibrations during the reaction. Vibrational mode calculations, based on dispersion corrected DFT simulations of the crystal lattices involved in the transformation, have assisted the interpretation of the experiments. Such an approach has allowed us to clarify the spectral signatures and to establish a correlation between the dynamics of the monomer and dimer systems in a process where chemical progress and crystal structural changes are demonstrated to occur simultaneously.     

Probing chemical transformations in organic solids via NMR techniques: The solid-state photodimerization reaction of 7-methoxy-4-methylcoumarin

It has been reported that crystalline 7-methoxy-4-methylcoumarin undergoes a [2 + 2] photodimerization reaction to give two different products; the major product is thesyn head-head dimer, whereas the minor product is thesyn head-tail dimer. In this paper, high-resolution solid-state¹³C NMR and solution-state¹H and¹³C NMR techniques have been applied to investigate various structural issues relating to this solid-state photodimerization reaction. In particular, spectra have been recorded at various stages during the progress of the photodimerization reaction with the aim of charting the structural changes in the system as a function of reaction progress, with particular interest in assessing the potential of this technique for investigating the structural reasons for the production of the minor product. Conformational and dynamic properties of the product obtained in this solid-state photodimerization reaction have also been assessed.     

In situ resonant Raman and ESR spectroelectrochemical study of electrochemically synthesized poly(<Emphasis Type="Italic">p</Emphasis>-phenylenevinylene)

The electrochemical synthesis of poly(p-phenylenevinylene) (PPV) and different modifications in the electronic distribution upon electrochemical p-doping (oxidation) and n-doping (reduction) of this polymer film have been studied in situ by resonance Raman spectroscopy, optical absorption spectroscopy and ESR spectroscopy. The polymer film has been prepared by electrochemical reduction of α,α,α′,α′-tetrabromo-p-xylene in dimethylformamide using tetraethylammonium tetrafluoroborate as the electrolyte salt. During electrochemical polymerization the position and relative intensities of the Raman bands change regularly as the chain length increases and finally converge on values reported for chemically prepared PPV. The Raman spectra for electrochemically polymerized PPV is compared to infrared-active vibration bands for electrochemically n-doped PPV. When the polymer undergoes redox reactions (doping-dedoping), shifts and broadening of Raman bands, compared to neutral PPV, are observed. Interpretation of the Raman spectra and the ESR results led to the conclusion that charge transfer in this system is mainly accomplished by polaron species formed upon doping of the polymer. In this reaction the quinoid structure is formed rather than the benzenoid structure. Electronic Publication     

1,3-二联苯基-2，4-二吡啶基环丁烷的结构与光化学性质

通过反-1-(4-联苯基)-2-(4-吡啶基)乙烯(EI)在稀硫酸中的光二聚反应合成了r-1,c-2,t-3,t-4-1,3-双(4-联苯基)-2,4-二(4-吡啶基)环丁烷(II).用X射线衍射法测定了其结构.晶体II为单斜晶系,空间群为P2     

Topochemical single-crystal-to-single-crystal photodimerization

The topochemical and topotactic solid-state photodimerization of 2-benzyl-5-benzylidenecyclopentanone is shown to be single-crystal-to-single-crystal, with the cell parameters of the monomer and dimer being very nearly identical (the maximum change being a contraction of 0.7% along c). For 2-benzl-5-p-bromobenzylidenecyclopentanone, the change in cell parameters is significantly larger (the maximum change being an elongation of 6.5% along c) such that the crystallinity of the final product varies with amongst other factors, the rate of reaction. A study of such benzylidenecyclopentanone derivatives should permit a greater understanding of those processes which determine the crystalline perfection of the reaction products.     

Preparation and thermal behavior of poly-p-phenylene diacrylic acid dimethyl ester

The photopolymerization behavior of p-phenylene diacrylic acid dimethyl ester (p-PDA Me) crystal and the thermal behavior of the resultant poly-p-PDA Me were investigated. From the kinetic study of polymerization at various temperatures a topochemical process via a stepwise mechanism was observed. Continuous change from monomer to polymer crystals was demonstrated by x-ray diffraction pattern and DSC analysis. Crystallinity of the reacting phase was maintained at an extremely high degree during the polymerization process in support of monomer crystal lattice control. Thermal study on as-polymerized poly-p-PDA Me crystal confirmed that the thermal reaction was a polymer crystal lattice-controlled depolymerization, which was followed by miscellaneous processes that involved vaporization, sublimation, and deterioration of the oligomeric or monomeric units of p-PDA Me. Thermal stability was dependent on the molecular weight. All the results are compared with those of four-center-type photopolymerization in the crystalline state.     

Solvatochromism, prototropism and complexation of para-aminobenzoic acid

Effect of solvents, buffer solutions of different pH and β-cyclodextrin (β-CD) on the absorption and fluorescence spectra of p-aminobenzoic acid (pABA) have been investigated. The inclusion complex of pABA with β-CD is investigated by UV-visible, fluorimetry, semiempirical quantum calculations (AM1), ¹H NMR and Scanning Electron Microscope (SEM). The thermodynamic parameters (ΔH, ΔG and ΔS) of the inclusion process are also determined. The experimental results indicated that the inclusion processes is an exothermic and spontaneous. The large Stokes shift emission in solvents with pABA are correlated with different solvent polarity scales. The increase in the excited dipole moment values suggest that pABA molecule is more polar in the S₁ state. Solvent and β-CD studies indicates intramolecular charge transfer in pABA is less than ortho and meta isomers. Acidity constants for different prototropic equilibria of pABA in the S₀ and S₁ states are calculated. β-Cyclodextrin studies shows that pABA forms a 1:1 inclusion complex with β-CD. A mechanism is proposed to explain the inclusion process.     

Design of Green-Emitting Salts from Substituted Pyridines: Understanding the Solid-State Photodimerization of trans-1,2-bis(4-pyridyl)ethylene

Polymorphic salts of trans-1,2-bis(4-pyridyl)ethylene (bpe), 2 [bpeH₂] ⋅ (SO₄)(2HSO₄) ( 1 ) and [bpeH₂] ⋅ 2HSO₄ ( 2 ) have been synthesized and their structures determined by X-ray crystallography. The Schmidt postulate predicts that neither of the salts will give rise to photodimerization so they can both potentially be applied as green light emitters. Despite the predictions, 1 undergoes a stereospecific solid-state photodimerization reaction with 100 % yield. This is due to UV induced combination of sliding and pedal-like movement of the pyridyl ring system that influences the alignment of C=C bonds. The sliding motion is restricted in 2 . Consequently, the green emission from 1 is completely quenched after photodimerization. It is evident that counter ions play a dominant role in dis- and enabling photodimerization; their degree of protonization and lattice placement are important solvent controlled design parameters towards crystal structures that can act as future light emitters.     

Total synthesis of dipiperamide A and revision of stereochemical assignment

The first total synthesis of dipiperamide A has been achieved by employing a solid-state photodimerization of an (E)-cinnamic acid derivative. This critical step results in the cyclobutane ring, which exists in the natural product, with full control of the regio- and stereochemistry at the four stereogenic centers. Results from these studies indicate that the proposed stereostructure of natural dipiperamide A should be revised to the structure originally assigned to dipiperamide B.     

Four-center type photopolymerization in the solid state. IV. Polymerization of α,α′-dicyano-p-benzenediacrylic acid its derivatives

The solid-state photopolymerization of α,α′-dicyano-p-benzene diacrylic acid (p-CBA) series has been studied. p-CBA, its esters, amide, and a few other cyano derivatives were prepared and new polymers were obtained from p-CBA alkyl esters on irradiation of ultraviolet or visible light. Though the polymerization behavior differs with each monomer, polymerization proceeds in essentially the same manner as in the 2,5-distyrylpyrazine (DSP) and p-benzenediacrylic acid (BDA) series: the reaction proceeds topochemically forming polymer with a cyclobutane ring in the main chain. Properties of high polymer are typical of cyclobutane-containing polymer. That is, they are highly crystalline with high melting temperature and a limited solubility. The study on this series of compounds, as well as the DSP and p-BDA series, supports the generalization that solid-state dimerization can be extended to solid-state photopolymerization of compound having two dimerizable units in a molecule.