Evaluation of Polyurethane-Based Membrane Matrices for Optical Ion-Selective Sensors

Abstract

Plasticized thin films of polyurethane (PU) mixed with poly(vinyl chloride)(PVC) or a terpolymer of poly(vinyl chloride)/(vinyl acetate)/(vinyl alcohol) (PVA) are examined as membrane matrices for the preparation of reversible optical ion sensors. Optical sensors for Na⁺, NH₄ ⁺, Cl^? and ClO₄ ^? are prepared by casting thin films of the polymer mixtures (PU/PVC (1:1 wt) and PU/PVA (4:1 wt)) containing appropriate ion carriers and pH chromophores on glass slides. The optical response properties of these membranes is essentially the same as conventional pure PVC membranes reported in the literature. However, significantly enhanced membrane adhesion to glass or silicon wafer surfaces is observed using the polyurethane based matrices, making them more suitable than PVC for use in the development of solid-state optical ion sensing devices.     

Antimicrobial activity of PVC-pyrazolone-silver nanocomposites

Poly(vinyl chloride)-pyrazolone; PVC-pz as a new modified form of PVC with high antibacterial and antifungal activities towards some Gram +ve bacteria S. Aureus, B. Subtilis and S. Faecalis) and Gram –ve bacteria (E. Coli, P. Aeruginosa and N. Gonorrhoeae) beside Candida albicans in addition to Aspragillus flavus as fungi has been synthesized in absence and in presence of silver-nanoparticles, AgNPs, in 3 and 5% by weight with respect to PVC. This was developed by a chemical reaction of PVC 1, and pyrazolone 2 in tetrahydrofuran, THF as solvent. PVC-pz derivative has been characterized by FTIR, ¹HNMR spectroscopic analyses, in addition to scanning and transmission electronic microscopy. Photostability of PVC-pz was evaluated by following the discoloration for UV- irradiated samples colorimetrically in accordance with degradation time. IR and ¹H-NMR analyses confirm that PVC-pz, 4 was formed indicating a substitution reaction of chlorine atoms of PVC chains to the hydrogen atom of active methylene and that attached to pyrazolone nitrogen at the same time. Antimicrobial activities of PVC-pz increased in the presence of AgNPs and with increasing its percentage.     

Ionic Diffusion Through Unblended PVC Membranes

Abstract

This work deals with the study of the diffusion of Cl^? ion through pure unblended polyvinylchloride (PVC) membranes of different thickness. Several PVC -tetrahydrofuran ratios and also different internal diameter glass disks have been used to change the thickness of the membrane. A chloride ion selective electrode also constructed in the laboratory is used as the detector. The electrode behaviour was studied by running up a calibration graph prior to membrane positioning. A mean slope of 57 ±1 mV/log.C at 28.0 ± 0.5 °C was obtained and the range of potential values were then known. The detector was very well washed and immediately a membrane was placed directly on its surface and assembled to a rotating disk electrode in order to get a diffusion cell. The receiving compartment in this system has a negligible volume. Therefore, the response of the chloride ion selective electrode is directly proportional to the flux of material through the membrane rather than to the receiving compartment concentration. An almost linear relationship between the Cl^? ion concentration in the range 0.0010 – 0.10 M and its flux through the unblended PVC membrane was found. The chloride ion flux through the PVC membrane in solutions with the ion strength adjusted to 0.1 M was twice to that value obtained without ion strength adjustor (ISA) in the solution. Average rate transport in the range 3.5?10^?7 to 9.6?10^?7 mol/s Cl^? was found at a rotation speed of 1280 rpm.     

Structure and Stability of Polyvinyl Chloride

Abstract

Polyvinyl chloride (PVC) was first prepared in the laboratory over a hundred years ago. Due to its inherent instability the commercial applications of the polymer could only be developed after the development of effective means for its stabilization. PVC started to gain commercial significance in the late thirties and since then has continued to gain in importance. By using modifying agents (plasticizers, fillers, stabilizers, and other additives), it can be modified to exhibit an extremely wide range of properties.     

The Effect of Hydrotalcite and Zinc Oxide on Smoke Suppression of Commercial Rigid PVC

To reduce the smoke release of poly(vinyl chloride) (PVC) during burning, layered double hydroxides (LDHs) and zinc oxide (ZnO) powders were used to modify the polymer. The results indicated that the addition of LDHs‐ZnO had a significant effect on smoke suppression. The limiting oxygen index (LOI) reached a maximum value and the smoke density rank (SDR) exhibited a minimum value when the weight percentages of LDHs and ZnO in PVC were 3% and 2%, respectively. Thermal stabilities of the modified PVC and degradation products were investigated by means of thermogravimetry and pyrolysis‐gas chromatography‐mass spectra (Py‐GC‐MS). The LDHs‐ZnO obviously accelerated the decomposition of PVC to release hydrogen chloride, and the decomposed PVC consequently produced the trans‐conjugated polyene sequences, which easily formed crosslinked structures. However, a cyclization reaction in PVC chain without the additives produced aromatic compounds such as benzene, toluene, and naphthalene at 350°C. Even though, an amount of aromatic compounds was released from the PVC modified with LDHs‐ZnO at the temperature of 600°C, the content of the decomposed products is relatively lower compared to unmodified PVC.     

Compatible Polyethylene/Polyvinyl Chloride Particle Hybrids Prepared by in‐situ Polymerization

Polyethylene/polyvinyl chloride (PE/PVC) hybrids were successfully prepared by a polymerization‐filling method. The catalyst for ethylene polymerization was supported on PVC particles, and ethylene was then polymerized in‐situ on the surface of the activated PVC. PVC particles could be well segmented and dispersed during in‐situ polymerization, and the prepared hybrids had an additional tangent peak between the glass transitions of polyethylene and PVC, indicating the formation of a compatible interlayer between nascent polyethylene and PVC during polymerization.     

α,α′,α″,α′″-meso-tetrahexyltetramethyl-calix[4]pyrrole: an easy-to-prepare,isomerically pure anion extractant with enhanced solubility in organic solvents

α,α′,α″,α′″-meso-Tetrahexyltetramethyl-calix[4]pyrrole is easily obtained as a single diastereomer in a one-pot reaction. It exhibits enhanced solubility in organic solvents, including aliphatic solvents, relative to its parent meso-octamethylcalix[4]pyrrole (1). Somewhat surprisingly, the tetrahexyl derivative 2 complexes with tributylmethylammonium chloride in chloroform more strongly than does 1 as shown by NMR titrations. However, 1 and 2 exhibit comparable complexation strength in extraction experiments, the difference between the NMR and extraction results being attributed to the effect of organic-phase water in the extraction systems. Mass-action analysis indicates the formation of the predominant complex TBMA⁺(1 or 2)Cl^? in both NMR and extraction systems, and equilibrium constants are reported. x-Ray crystal structures were obtained for the free ligand 2 and its complex with tetramethylammonium chloride. The free ligand crystallises in the 1,3-alt conformation with equatorial hexyl arms. In the chloride complex with 2 in its cone conformation, the hexyl arms adopt an axial orientation, enveloping the anion. DFT calculations show this binding conformation to be the most stable, mostly owing to destabilising steric interactions involving the pyrrole C–H and alkyl C–H groups positioned equatorially.     

Ce(III) immobilized on aminated poly(vinyl chloride): high-performance synergistic bifunctional acid–base catalyst for one-pot synthesis of 1,4-dihydropyrano[2,3-c]pyrazoles

A bifunctional acid–base catalyst of Ce^III immobilized on ethylenediamine (EDA)-grafted poly(vinyl chloride) (PVC) has been prepared by a simple approach. First, PVC was treated with EDA to afford aminated poly(vinyl chloride) (PVC–EDA). Thereafter, the PVC–EDA were used in the mobilization of CeCl₃ to obtain a bifunctional catalyst (PVC–EDA–Ce^III) in which a harmonious coexistence of Lewis acid (Ce³⁺) sites and Lewis base (amine) moieties on PVC was achieved. The obtained PVC–EDA–Ce^III complex was characterized by EA, ICP–AES, FT-IR, SEM, EDS, TGA, and DTG techniques. The as-prepared catalyst can efficiently catalyze the one-pot four-component reactions of aromatic aldehydes, malononitrile, ethyl acetoacetate, and hydrazine in ethanol under mild conditions to afford polyfunctionalized 1,4-dihydropyrano[2,3-c]pyrazoles with excellent yields. The high catalytic performance of the PVC–EDA–Ce^III bifunctional catalyst is attributed to a synergistic effect of Lewis acid sites (Ce^III) and Lewis base sites (amino moieties). The significant features of the present protocol are environmentally benign, simple operation, short reaction time, high yields, and without chromatographic separation. Moreover, the catalyst can easily be separated by simple filtration and reused for five runs without obvious decline or losing its catalytic activity.

     

SYNTHESIS AND REACTIONS OF HALO DERIVATIVES OF 4-ISOPROPYL-2H-1,4-THIAZIN-3-ONE

Abstract

Reaction of 4-isopropyl-2H-1,4-thiazin-3-one 1 (R [dbnd] i-Pr) with N-chloro- and N-bromosuccinimide occurred exclusively at the 6-position to give 6-chloro and 6-bromo derivatives of 1 (R [dbnd] i-Pr), respectively, in high yield, in sharp contrast to the 2-aroyloxylation by benzoyl peroxide or m-chloroperbenzoic acid reported earlier.² Reaction of 1 (R [dbnd] i-Pr) with methanesulfonyl chloride in the presence of aluminum chloride afforded an addition compound, 4-isopropyl-5,6-dichloro-1,4-tetrahydrothiazin-3-one. The 2-chloro derivative 6 of 1 (R [dbnd] i-Pr) was successfully prepared by hydrolysis of the 2-m-chloroben-zoyloxy derivative of 1 (R [dbnd] i-Pr) followed by treatment with thionyl chloride. Derivative 6 reacted readily under mild conditions with water, alcohols, thiols, ammonia and amines to give various 2-substituted compounds of 1 (R [dbnd] i-Pr). With phenol as a nucleophile, 1 (R [dbnd] i-Pr) reacted exclusively at the para position. Reaction at carbon atoms also occurred with N,N-dimethylaniline and 2,6-xylidine.     

Non-phthalate plasticizer from camphor for flexible PVC with a wide range of available temperature

A bio-based plasticizer, (1′,7′,7′-trimethyldispiro [ [1,3]dioxolane-2,2′-bicyclo [2.2.1]heptane-3′,2″- [1,3]dioxolane]-4,4″-diyl)bis (methylene) dioctanoate (abbreviated as CDO), was designed to replace a traditional phthalate-based plasticizer. The structure of CDO was analyzed by ¹H NMR. The characteristics of CDO plasticizers, which were judged to have excellent compatibility with PVC due to their solubility parameters, were evaluated by thermal and mechanical analyses and compared with dioctylphthalate (DOP). PVC with 20% CDO added was thermally stable up to 251.9 °C and exhibited excellent strength and flexibility with a high T_g derived from its robust and bulky structure. In addition, since CDO is intertwined with the polymer chain, it shows excellent migration properties in many solvents. The results of our study suggest that CDO can be applied to produce flexible PVC and to expand PVC coverage due to the improved migration resistance.     

Novel poly(vinyl chloride) based thermoplastic elastomers incorporating vinyl-functionalized silicone rubber

ABSTRACT

Novel poly(vinyl chloride) (PVC) based thermoplastic elastomers were developed by blending with different proportions of vinyl-functionalized silicone rubber. Scanning electron microscopy (SEM) confirmed good compatibility between PVC and silicone rubber which allowed enhancement of the stress-strain behavior. On the contrary to neat PVC, exposure to heat or UV radiation was found not to cause any considerable deterioration to the stress-strain behavior. Fourier Transform Infrared (FTIR) revealed a possible chemical interaction between the blend components involving the vinyl groups from the silicone rubber, which is thought to be the reason for maintaining the mechanical properties unaltered. Further investigation with ultraviolet-visible (UV-Vis.) spectroscopy signified absence of intensive dehydrochlorination usually encountered for PVC after exposure to heat or UV radiation, which indicates a potential stabilizing effect for the silicone rubber and build up of a network structure comprising both hard and soft segments.     

Photo-oxidation of poly(vinyl chloride)

The photo-oxidation of PVC has been studied over the temperature range 30–150°C. Initiation with ultraviolet (2537A) radiation has been correlated with the presence of minute amounts of ozone. The contribution of atomic oxygen and singlet oxygen (¹Δ_g) molecules to the initiation mechanism is discussed. The β-chloroketones probably formed in the photo-oxidation of PVC, decomposed according to a Norrish type I reaction without loss of chlorine atoms. The gaseous products of the photo-oxidation of PVC at 30°C were carbon dioxide, carbon monoxide, hydrogen, and methane. Hydrogen chloride was obtained only when PVC was heated at high temperatures. When PVC was photo-oxidized and then heated at high temperature, benzene was obtained in addition to hydrogen chloride. The gaseous products from the photo-oxidations of model compounds, such as 4-chloro-2-butanone and 2,4-dichloropentane, were also compared with those from PVC. Hydrogen chloride was detected only after photo-oxidation at temperatures of 25°C or higher. Therefore, it was concluded that hydrogen chloride is mainly a product of thermal decomposition. Since unsaturation was not observed in photo-oxidized PVC films, the cause of discoloration is unclear. When PVC was modified by stabilizers or additives, the oxidative degradation was further complicated by side reactions with the additives.     

NMR Spectroscopy of Poly(Vinyl Chloride) Defects. 1H-NMR Analysis of the 1,2-Dichloroethyl End Group to the Triad Level

Abstract

We synthesized and analyzed by ¹H NMR the mixture of meso (m) and racemic (r) 1,2,4,5-tetrachloropentane, as well as the mixture of mm, mr, and rr isomers of 1,2,4,6,7-pentachloroheptane and its precursor 1,2,6,7-tetrachloroheptane-4-ol as models for PVC 1,2-dichloroethyl end group. We were able to correct previous assignments as well as extend the ¹H-NMR analysis of this end group in PVC to the triad level.     

Chemical characteristics of the products of the complexation reaction between copper(II) and a tetra-aza macrocycle in the presence of chloride ions

The reaction of copper(II) perchlorate with the hydrochloride salt of 3,6,9,15-tetra-azabicyclo[9.3.1]penta-deca-1,11,13-triene (L1) in acetonitrile forms two macrocyclic complexes that can be characterized: [L1Cu^IICl][ClO₄] (1) and [L1Cu^IICl]₂[CuCl₄] (2). The structural, electronic, and redox properties of these complexes were studied using spectroscopy (EPR and UV–visible) and electrochemistry. In addition, the solid-state structure of 1 was obtained using X-ray diffraction. The copper(II) is five-coordinate ligated by four N-atoms of the macrocycle and a chloride atom. EPR studies of 1 both in DMF and aqueous solution indicate the presence of a single copper(II) species. In contrast, EPR studies of 2 performed in frozen DMF and in the solid-state reveal the presence of two spectroscopically distinct copper(II) complexes assigned as [L1Cu^IICl]⁺ and [Cu^IICl₄]^2?. Lastly, electrochemical studies demonstrate that both [L1Cu^IICl]⁺ and [Cu^IICl₄]^2? are redox active. Specifically, the [L1Cu^IICl]⁺ undergoes a quasi-reversible Cu(II)/(I) redox reaction in the absence of excess chloride. In the presence of chloride, however, the chemical irreversibility of this couple becomes evident at concentrations of chloride that exceed 50 mM. As a result, the presence of chloride from the chemical equilibrium of this latter species impedes the reversibility of the reduction of [L1Cu^IICl]⁺ to [L1Cu^ICl]⁰.     

[f]-Fused purine-2,6-diones: Synthesis of new [1,3,5]- and [1,3,6]-thiadiazepino-[3,2-f]-purine ring systems

Summary 6-Phenyl-1,3-dimethyl-2,4-dioxo-1,2,3,4,8,9-hexahydro-[1,3,5]-thiadiazepino-[3,2-f]-purine (5) was obtained by a three-step synthesis from 8-mercapto-1,3-dimethyl-3,7-dihydro-1H-purine-2,6-dione (1) and 2-(benzoylamino)-ethyl chloride (2)via 8-(benzoylaminoethylthio)-1,3-dimethyl-3,7-dihydro-1H-purine-2,6-dione (3) and its chloromido derivative4. The analogous 9-phenyl-1,3-dimethyl-2,4-dioxo-1,2,3,4,6,7-hexahydro-[1,3,6]-thiadiazepino-[3,2-f]-purine (7) was synthesized either from compound1 and N-(2-chloroethyl)-benzimido chloridevia N-(chloroethyl)-S-(1,3-dimethyl-2,4-dioxo-1,2,3,4-tetrahydro-7H-purin-8-yl)-benzothioimide (6), or alternatively from 7-(2-benzoylaminoethyl)-8-bromo-1,3-dimethyl-3,7-dihydro-1H-purine-2,6-dione (9), its 8-mercapto derivative10 and the corresponding chloroimido compound11 being the intermediates.Part of this paper was presented as a preliminary report at the Congress of Czech and Slovak Chemical Societies, Olomouc, Czech Republic, September 13–16, 1993     

All‐Solid‐State Chloride Sensors with Poly(3‐Octylthiopene) Matrix and Trihexadecylmethylammonium Chlorides as an Ion Exchanger Salt

All‐solid‐state chloride sensors were prepared by incorporation of trihexadecyl‐methylammonium chloride (THMACl) as an ion‐exchanger salt into a conjugated polymer membrane, poly(3‐octylthiophene) (POT). The influence of additional membrane components, such as a lipophilic anion, (potassium tetrakis[3,5‐bis(trifluoromethyl)phenyl] borate), poly(vinyl chloride) (PVC) or a plasticizer, (2‐nitrophenyl octyl ether) were studied. The membrane components were dissolved in chloroform except for PVC, which was dissolved in tetrahydrofuran (THF). The membrane solution was deposited on glassy carbon (GC) by solution casting resulting in all‐solid‐state chloride sensors. The sensor characteristics were determined potentiometrically and with impedance spectroscopy. The addition of plasticizer was found to be crucial in obtaining a well functioning Cl^?‐ISE based on POT and THMACl.     

Synthesis and Metal Ion Recognition Properties of a Novel Chiral Calix[4](azoxa)crown-7

A novel chiral calix[4](azoxa)crown-7 (9) has been synthesized and its metal ion recognition properties investigated. The starting reagents, chiral diamine 5 and calix[4]arene diacid chloride derivative 8, were prepared according to literature methods. ¹H and ¹³C NMR data show that 9 exists in a cone conformation. In liquid–liquid extraction experiments, 9 exhibits selectivity for Li⁺ among the other alkali metals and a good extraction ability for transition metal cations, suggesting its potential use in different fields, such as a sensor for ions as well as for chiral molecules.     

Synthesis and structural characterization of cationic octahedral oxorhenium(V) complexes with bidentate imidazole derivatives

Cationic distorted octahedral complexes [ReOCl(OEt)(L)(PPh₃)]X {L = 2-(1-ethylaminomethyl)-1-methylimidazole (eami), 2-(1-methylaminomethyl)-1-methylimidazole (mami), 2-(1-ethylthiomethyl)-1-methylimidazole (etmi); X=ReO₄, PF₆} were prepared by reaction of trans-[ReOCl₃(PPh₃)₂] with a twofold molar excess of L in ethanol under anaerobic conditions. X-ray structure determinations of [ReOCl(OEt)(eami)(PPh₃)](ReO₄) (1a) and its etmi equivalent (3a) were performed. In 1a coordination of the chloride occurs trans to the imidazole nitrogen. However, in 3a the chloride is coordinated trans to the ethereal sulfur donor of etmi.     

Synthesis,characterization, and reactivity studies in ethylene polymerization of cyclometalated palladium(II) complexes containing terdentate ligands with N,C,N-donors

The reaction of [Na₂PdCl₄] with 3,5-bis(2-pyridoxy)toluene (L_pyH) in acetic acid yields the cyclometalated complex [PdCl(L_py-N, C, N)] (1). Complex 1 can be further converted into neutral species by metathesis reaction exchange of chloride by either iodide or thiocyanate to yield [PdX(L_py-N, C, N)] (X = I (2), SCN (3)). The chloride can be replaced by neutral ligands like pyridine or acetonitrile in the presence of silver tetrafluoroborate to give the corresponding cationic compounds [PdL(L_py-N, C, N)]BF₄ (L = Py (4), MeCN (5)). In contrast, the reaction of [Na₂PdCl₄] with 3,5-bis(3, 5-dimethylpyrazol-1-ylmethyl)toluene (L_pzH) under analogous conditions yields the neutral complex [PdCl₂(L_pzH-N, N)](6) with the ligand bidentate N,N-donor. The cyclometalated palladium complex [PdCl(L_pz-N, C, N)] (7) was prepared by the reaction of Pd(OAc)₂ with L_pzH in acetic acid followed by a metathetic reaction with lithium chloride in acetone/water. Complexes 1, 6, and 7 in the presence of methylaluminoxane (MAO) lead to an active catalyst for the polymerization of ethylene.     

Nickel Pyrazolyl Borate Complex: Synthesis,Structure, and Analytical Application as Benzoate Selective Sensor

The complex [Tp^Ph,MeNi(Cl)Pz^Ph,MeH] ( I ) [Tp^Ph,Me=hydrotris(3‐phenyl‐5‐methyl‐pyrazol‐1‐yl)borate; Pz^Ph,MeH=3‐phenyl‐5‐methyl‐pyrazole] has been synthesized and explored as ionophore for the preparation of a poly(vinyl chloride) (PVC) membrane sensor for benzoate anions. The formation constants for the interaction of complex I with different organic/inorganic anions in solution have also been studied by sandwich membrane method. PVC based membranes of I using tridodecylmethylammonium chloride (TDDMACl) as cation discriminator and o‐nitrophenyloctyl ether (o‐NPOE), dibutylphthalate (DBP), benzylacetate (BA) and tributylphosphate (TBP) as plasticizing solvent mediators were prepared and investigated as benzoate selective sensors. The best performance was shown by the membrane with composition (w/w) of I (5): PVC (150): NPOE (345): TDDMACl (0.3). The proposed sensor exhibits significantly enhanced selectivity toward benzoate ions over the concentration range 2.2×10^?6–1.0×10^?1 M with a lower detection limit of 1.4×10^?6 M and a Nernstian slope of 59.2 mVdecade^?1 of activity within a pH range of 4.5–8.5. The sensor has a response time of 12 s and can be used for at least 8 weeks without any considerable divergence in their potential response. The membrane sensor of complex I have been checked for reversible and accurate sensing of benzoate levels present in liquid food products.