A convenient single step synthesis of p-thiomethylmethylcalixarenes and metal ion extraction studies

A facile synthesis of p-thiomethylmethylcalixarenes through a [2,5] sigmatropic rearrangement and extraction of soft heavy metal ions using the prepared calix[4]arene derivative is reported here.     

Application of the zone melting technique to metal chelate systems-IV Concentration of metal-8-hydroxyquinoline chelates in 8-hydroxyquinoline

The zone melting technique has been applied to 8-hydroxyquinoline containing trace amounts of various metal 8-hydroxyquinolates such as the nickel(II), cobalt(II), zinc(II) and copper(II) chelates. The metal chelate in each system was concentrated in the direction of zone travel. The highest concentrating effect was observed in the copper(II) chelate system. The concentration ratio, defined as the fraction of the metal chelate concentrated in the bottom 15% of the column, was determined after the 30th passage. A trace amount of copper ion extracted with a large excess of 8-hydroxyquinoline, was concentrated by means of the zone melting technique. The concentration ratio was 96%.     

"Click" synthesis and properties of carborane-appended large dendrimers

Large dendrimers, noted G(n)-3(n+2)cage, containing 3(n+2) o-carborane cluster cages MeC(2)B(10)H(10) at their peripheries (n = number of generation noted G(n)) have been synthesized by Huisgen-type azide alkyne Cu(I)-catalyzed dipolar "click" cycloaddition reactions (CuAAC) between an o-carborane monomeric cluster containing an ethynyl group and arene-centered azido-terminated dendrimers G(n)-3(n+2)N(3) of generations 0, 1, and 2. Attempts to synthesize higher-generation dendrimers of this family yielded insoluble materials. The carborane dendrimers G(0)-9cage, G(1)-27cage, and G(2)-81cage have been characterized by (1)H, (13)C, (11)B NMR, elemental analysis, matrix-assisted laser desorption/ionization time of flight (MALDI-TOF) mass spectroscopy, and size exclusion chromatography (SEC) showing low polydispersities, dynamic light scattering (DLS) showing hydrodynamic diameters of 5.7 nm for the G(1)-27cage and the 12.9 nm for the G(2)-81cage. These dendrimers are extremely robust thermally, with 10% mass loss temperatures of 411 °C for the G(0)-9cage, 371 °C for the G(1)-27cage, and 392 °C for the G(2)-81cage. They all showed a strong absorption in the UV region peaking at 258 nm, whereas emission spectra of low intensities were observed between 280 and 480 nm.     

Application of the zone melting technique to metal chelate systems-V Zone chromatographic separation of metal chelates on columns of some inert solid solvents

Binary mixtures of acetylacetone and 8-hydroxyquinoline chelates of copper(II), nickel(II), cobalt(II) and cobalt(III) were processed by zone-chromatography on columns of some naphthylalkyl ethers as inert solid solvents. The metal chelates were separated to give chromatograms on the columns according to the ratio of their distribution coefficients. Distribution coefficients of metal ions varied with the type of chelating agent used and the solid solvent, and were found to be strongly affected by operating conditions, especially zone length, zone travelling speed and initial concentration of the metal chelate.     

A step forward in metal nitride and carbide synthesis: from pure nanopowders to nanocomposites

Transition metal nitrides and carbides (MN/MC) are intriguing materials due to their combination of properties that place them between high-performance ceramics and pure metals. Recent progress in easier synthetic routes toward their production as bulk or nanostructured materials explains the current surge in sustained attention such progress has been receiving. After progressing toward easier syntheses of MN/MC nanosystems as pure phases, coupling MN/MC with a second phase for the production of hybrids and nanocomposites is considered a next important step in the development of these nanosystems. The coupled phase can simply be a different nitride or carbide; it also can be a polymer, a poly(ionic liquid) or a carbon phase, just to give a few examples. The combination of these phases with MN/MC nanoparticles could lead to multifunctional materials. The aim of the present review is to show how far the research concerning the production of MN/MC-based nanocomposites has progressed, especially in terms of controlled composition, morphology and properties. We discuss the most intensely investigated systems and related motivations, as well as partially unexplored yet appealing alternative materials.     

"Click chemistry" inspired synthesis of pseudo-oligosaccharides and amino acid glycoconjugates

[reaction: see text] Various pseudo-oligosacchardies and amino acid glycoconjugates were synthesized via an intermolecular 1,3-dipolar cycloaddition ("click") reaction using easily accessible carbohydrate and amino acid derived azides and alkynes as building blocks. It is pertinent to mention that the conjugation reaction is highly regioselective and high yielding and can be carried out under mild reaction conditions.     

Click mechanochemistry: quantitative synthesis of "ready to use" chiral organocatalysts by efficient two-fold thiourea coupling to vicinal diamines

Mechanochemical methods of neat grinding and liquid-assisted grinding have been applied to the synthesis of mono- and bis(thiourea)s by using the click coupling of aromatic and aliphatic diamines with aromatic isothiocyanates. The ability to modify the reaction conditions allowed the optimization of each reaction, leading to the quantitative formation of chiral bis(thiourea)s with known uses as organocatalysts or anion sensors. Quantitative reaction yields, combined with the fact that mechanochemical reaction conditions avoid the use of bulk solvents, enabled solution-based purification methods (such as chromatography or recrystallization) to be completely avoided. Importantly, by using selected model reactions, we also show that the described mechanochemical reaction procedures can be readily scaled up to at least the one-gram scale. In that way, mechanochemical synthesis provides a facile method to fully transform valuable enantiomerically pure reagents into useful products that can immediately be applied in their designed purpose. This was demonstrated by using some of the mechanochemically prepared reagents as organocatalysts in a model Morita-Baylis-Hillman reaction and as cyanide ion sensors in organic solvents. The use of electronically and sterically hindered ortho-phenylenediamine revealed that mechanochemical reaction conditions can be readily optimized to form either the 1:1 or the 1:2 click-coupling product, demonstrating that reaction stoichiometry can be more efficiently controlled under these conditions than in solution-based syntheses. In this way, it was shown that excellent stoichiometric control by mechanochemistry, previously established for mechanochemical syntheses of cocrystals and coordination polymers, can also be achieved in the context of covalent-bond formation.     

Multiple-electron transfer in a single step. Design and synthesis of highly charged cation-radical salts

[structure: see text]. Macromolecules 1c and 2c bearing multiple redox-active sites are synthesized by an efficient palladium-catalyzed coupling of 2,5-dimethoxytolylmagnesium bromide with readily available hexakis(4-bromophenyl)benzene and tetrakis(4-bromophenyl)methane. These macromolecular electron donors undergo reversible oxidation at a constant potential of 1.15 V vs SCE to yield robust, multiply charged cation radicals that are isolated in pure form using SbCl(5) as an oxidant. These nanometer-size cation-radical salts are shown to act as efficient "electron sponges" toward a variety of electron donors.     

"Click-to-chelate": design and incorporation of triazole-containing metal-chelating systems into biomolecules of diagnostic and therapeutic interest

The site-specific conjugation of metal chelating systems to biologically relevant molecules is an important contemporary topic in bioinorganic and bioorganometallic chemistry. In this work, we have used the CuI-catalyzed cycloaddition of azides and terminal alkynes to synthesise novel ligand systems, in which the 1,2,3-triazole is an integral part of the metal chelating system. A diverse set of bidentate alkyne building blocks with different aliphatic and aromatic backbones and various donor groups were prepared. The bidentate alkynes were reacted with benzyl azide in the presence of a catalytic amount of CuI to form tridentate model ligands. The chelators were reacted with [ReBr3(CO)3]2- to form well-defined and stable complexes with different overall charges, structures and hydrophilicities. In all cases tridentate coordination of the ligands, including through N3 of the 1,2,3-triazole ring, was observed. The ligand systems could also be quantitatively radiolabelled with the precursor [99 mTc (H2O)3(CO)3]+ at low ligand concentrations. Similarly the alkynes were reacted with an azido thymidine derivative to form a series of compounds, which could be radiolabelled in situ to form single products. Subsequent incubation of the neutral and cationic organometallic 99 mTc thymidine derivatives with human cytosolic thymidine kinase, a key enzyme in tumour proliferation, revealed that only the neutral compounds maintained substrate activity towards the enzyme. Bioconjugation, radiolabelling and enzymatic reactions were successfully performed in a matter of hours. Thus, click chemistry provides an elegant method for rapidly functionalising a biologically relevant molecule with a variety of efficient metal chelators suitable for (radio)labelling with the M(CO)3 core (M=99 mTc, Re), to offer new potential for technetium-99 m in clinical and preclinical tracer development.     

Expeditious synthesis of ‘P’-protected macrocycles en route to lanthanide chelate metal complexes

Phosphonic acid appended tetraazacyclododecane (cyclen)-based macrocycles are attractive metal-ion chelators for diagnostic imaging and therapeutic delivery. Here, we report a novel P-protected methodology that facilitates the rapid synthesis and purification of targeted phosphonic acid bearing macrocycles. Purification of these intermediates is facile, and deprotection using neat TFA is rapid, yet mild enough to preserve the integrity of delicate peptides and/or targeting moieties.     

High-performance liquid chromatography of metal chelates: Environmental and industrial trace metal control

The methodological aspects of the use of HPLC in determination of metals in the form of their chelates are discussed. Rational schemes for the analysis of complex environmental and industrial samples are presented, including choice of chelating reagent, chelate preparation, metal concentration, separation method and detection method. Examples of the application of HPLC of metal chelates to environmental, production and quality control are presented.     

Study of a system for introducing metal chelate complexes in AAS

Summary The possibility of extending the sampling of volatile phases in AAS by use of metal beta-diketonates is considered. An electrically heated system was designed in which the chelate was injected, volatilized and then carried by a nitrogen stream to a silica tube, which was heated with an air-acetylene flame. The method was investigated for Cr, Zn and Mn using acetylacetone as chelating agent. The introduction of volatile chelates gives an increase in sensitivity with respect to the nebulization and atomization of solutions in the flame. This sampling system is limited to metallic chelates which are thermally stable and sufficiently volatile. The partial decomposition, which Zn acetyl-acetonate and, particularly Mn acetylacetonate undergo, causes a reduction in the sensitivity and precision of the determination.

---

Untersuchung eines Probeeingabesystems für Metallchelatkomplexe in der AASEinfluß der Chelatstabilität

     

A single step synthesis of 6-aminophenanthridines from anilines and 2-chlorobenzonitriles

Biologically active 6-aminophenanthridines were prepared in a single step procedure: Metal amides in liquid ammonia promoted the condensation of anilines with 2-chloro-benzonitriles. 6-Aminophenanthridines were isolated in moderate yield.     

Review: recent advances in the chemistry of metal chelate monomers

This review summarizes recent advances in the chemistry of metal chelate monomers. Depending on the character of bonding of the metal to the chelating fragment, metal chelate monomers are divided into four main types: molecular metal chelates, intracomplex compounds, macrocyclic complexes, and polynuclear metal chelates. The synthetic methodologies for preparing metal chelate monomers are systematized. Special attention is paid to the effect of a metal on both the polymerization transformations of the metal chelate monomers and properties of the products formed. The bibliography includes papers published after 2010.     

Completely "green" synthesis and stabilization of metal nanoparticles

In the present Communication, a completely "green" synthetic method for producing silver nanoparticles is introduced. The process is simple, environmentally benign, and quite efficient. By gentle heating of an aqueous starch solution containing silver nitrate and glucose, we produce relatively monodisperse, starched silver nanoparticles. beta-d-Glucose serves as the green reducing agent, while starch serves as the stabilization agent.     

"Click" synthesis of small molecule-peptide conjugates for organelle-specific delivery and inhibition of lysosomal cysteine proteases

A click chemistry approach for the synthesis of small molecule inhibitor-peptide conjugates to achieve organelle-specific delivery has been developed. Biological testing showed that the inhibitor-Tat conjugate was successfully delivered to the lysosomes, leading to potent inhibition of lysosomal cysteine proteases in cultured cells.     

Optically switchable chelates: optical control and sensing of metal ions

This study introduces new concepts in the design, synthesis, and in vitro and in vivo characterization, manipulation, and imaging of organic chelates whose association with metal ions is rapidly and reversibly controlled by using light. Di- and tricarboxylic group bearing photochromes, nitrobenzospiropyran (nitroBIPS), undergo rapid and reversible, optically driven transitions between their spiro (SP) and fluorescent merocyanine (MC) states. The MC state of nitroBIPS-8-DA binds tightly to various metal ions resulting in specific shifts in absorption and fluorescence, and the dissociation constant for its Gadolinium complex in water is measured at approximately 5 microM. The metal-bound MC state is converted to the weaker-binding SP state with use of 543 nm light, while the SP to MC transition is complete with use of 365 or 720 nm (2-photon) light within several microseconds. Fluorescence imaging of the MC state of nitroBIPS-8-TriA was used to quantify the rate and efficiency of optical switching and to provide a real-time readout of the state of the optically switchable chelate within living cells.     

New chelate ring opening reactions leading to the synthesis of novel mixed ligand complexes of the octahedral metal carbonyls

Reactions of the four-membered ring chelate CH₃N(PF₂)₂Cr(CO)₄ with trivalent phosphorous ligands (L) at 80°C leads to facile opening of the chelate ring to give the mixed ligand complexes trans-CH₃N(PF₂)₂Cr(CO)₄L (L=C₆H₅)₃P or monodentate C₆H₅N(PF₂)₂) containing a monodentate CH₃N(PF₂)₂ ligand.     

"Click" on tubes: a versatile approach towards multimodal functionalization of SWCNTs

Organic functionalization of carbon nanotube sidewalls is a tool of primary importance in material science and nanotechnology, equally from a fundamental and an applicative point of view. Here, an efficient and versatile approach for the organic/organometallic functionalization of single-walled carbon nanotubes (SWCNTs) capable of imparting multimodality to these fundamental nanostructures, is described. Our strategy takes advantage of well-established Cu-mediated acetylene-azide coupling (CuAAC) reactions applied to phenylazido-functionalized SWCNTs for their convenient homo-/heterodecoration with a number of organic/organometallic frameworks, or mixtures thereof, bearing terminal acetylene pendant arms. Phenylazido-decorated SWCNTs were prepared by chemoselective arylation of the CNT sidewalls with diazonium salts under mild conditions, and subsequently used for the copper-mediated cycloaddition protocol in the presence of terminal acetylenes. The latter reaction was performed in one step by using either single acetylene derivatives or equimolar mixtures of terminal alkynes bearing either similar functional groups (masked with orthogonally cleavable protecting groups) or easily distinguishable functionalities (on the basis of complementary analytical/spectroscopic techniques). All materials and intermediates were characterized with respect to their most relevant aspects/properties by TEM microscopy, thermogravimetric analysis coupled with MS analysis of volatiles (TG-MS), elemental analysis, cyclic voltammetry (CV), Raman and UV/Vis spectroscopy. The functional loading and related chemical grafting of both primary amino- and ferrocene-decorated SWCNTs were spectroscopically (UV/Vis, Kaiser test) and electrochemically (CV) determined, respectively.     

A tandem Ferrier and Click reaction: a facile synthesis of triazolyl-2,3-dideoxypyranosides

Glycosyl azides, prepared in situ from glucal and trimethylsilyl azide via Ferrier rearrangement, undergo smooth coupling with alkynes under neutral conditions by means of ‘Click reactions’ to furnish 1,2,3-triazole-linked glycoconjugates in high yields and with moderate stereoselectivity. The method provides a convenient route to prepare glycoconjugates from glucals, trimethylsilyl azide, and alkynes via a three component reaction.