Peptide models. XXXIII. Extrapolation of low-level Hartree-Fock data of peptide conformation to large basis set SCF,MP2, DFT,and CCSD(T) results. The Ramachandran surface of alanine dipeptide computed at various levels of theory

At the dawn of the new millenium, new concepts are required for a more profound understanding of protein structures. Together with NMR and X-ray-based 3D-structure determinations in silico methods are now widely accepted. Homology-based modeling studies, molecular dynamics methods, and quantum mechanical approaches are more commonly used. Despite the steady and exponential increase in computational power, high level ab initio methods will not be in common use for studying the structure and dynamics of large peptides and proteins in the near future. We are presenting here a novel approach, in which low- and medium-level ab initio energy results are scaled, thus extrapolating to a higher level of information. This scaling is of special significance, because we observed previously on molecular properties such as energy, chemical shielding data, etc., determined at a higher theoretical level, do correlate better with experimental data, than those originating from lower theoretical treatments. The Ramachandran surface of an alanine dipeptide now determined at six different levels of theory [RHF and B3LYP 3-21G, 6-31+G(d) and 6-311++G(d,p)] serves as a suitable test. Minima, first-order critical points and partially optimized structures, determined at different levels of theory (SCF, DFT), were completed with high level energy calculations such as MP2, MP4D, and CCSD(T). For the first time three different CCSD(T) sets of energies were determined for all stable B3LYP/6-311++G(d,p) minima of an alanine dipeptide. From the simplest ab initio data (e.g., RHF/3-21G) to more complex results [CCSD(T)/6-311+G(d,p)//B3LYP/6-311++G(d,p)] all data sets were compared, analyzed in a comprehensive manner, and evaluated by means of statistics.     

Theoretical study of the conformational energy hypersurface of cyclotrisarcosyl

The multidimensional Conformational Potential Energy Hypersurface (PEHS) of cyclotrisarcosyl was comprehensively investigated at the DFT (B3LYP/6-31G(d), B3LYP/6-31G(d,p) and B3LYP/6-311++G(d,p)), levels of theory. The equilibrium structures, their relative stability, and the Transition State (TS) structures involved in the conformational interconversion pathways were analyzed. Aug-cc-pVTZ//B3LYP/6-311++G(d,p) and MP2/6-31G(d)//B3LYP/6-311++G(d,p) single point calculations predict a symmetric cis-cis-cis crown conformation as the energetically preferred form for this compound, which is in agreement with the experimental data. The conformational interconversion between the global minimum and the twist form requires 20.88 kcal mol-1 at the MP2/6-31G(d)//B3LYP/6-311++G(d,p) level of theory. Our results allow us to form a concise idea about the internal intricacies of the PEHSs of this cyclic tripeptide, describing the conformations as well as the conformational interconversion processes in this hypersurface. In addition, a comparative analysis between the conformational behaviors of cyclotrisarcosyl with that previously reported for cyclotriglycine was carried out     

Structural elucidation of nitro-substituted five-membered aromatic heterocycles utilizing GIAO DFT calculations

The GIAO (Gauge Including Atomic Orbitals) DFT (Density Functional Theory) method is applied at the B3LYP/6-31+G(d,p)//B3LYP/6-31+G(d), B3LYP/6-311++G(d,p)//B3LYP/6-31+G(d), B3LYP/6-311+G (2d,p)//B3LYP/6-31+G(d) and B3LYP/6-311++G(d,p)//B3LYP/6-311++G(d,p) levels of theory for the calculation of proton and carbon chemicals shifts and coupling constants for 25 nitro-substituted five-membered heterocycles. Difference (1D NOE) spectra in combination with long-range gHMBC experiments were used as tools for the structural elucidation of nitro-substituted five-membered heterocycles. The assigned NMR data (chemical shifts and coupling constants) for all compounds were found to be in good agreement with theoretical calculations using the GIAO DFT method. The magnitudes of one-bond (1JCH) and long-range (nJCH, n>1) coupling constants were utilized for unambiguous differentiation between regioisomers of nitro-substituted five-membered heterocycles.     

Conformational inversion-topomerization processes of ethylcyclohexane and 1,2-dimethylcyclohexane: A computational investigation

To deeply reveal the impact of the substituents and their special orientations in ring on conformational behaviors for substituted cyclohexanes, a comprehensive study of ethylcyclohexane, cis-, and trans-1,2-dimethylcyclohexanes has been carried out. All conformational structures for them were captured by the accurate ab intio method, that is, B3LYP/6-311++G(d,p) method was used for geometry optimizations, and MP2/6-311++G(d,p), G4, and CCSD(T)/6-311++G(d,p) methods were applied for the high-level single point energy refinements. Based on CCSD(T)/6-311++G(d,p) quantum results, the conformational populations of minima for these three substituted cyclohexanes were calculated by Boltzmann distribution over 300-2500 K. Additionally, the conformational inversion-topomerization pathways for them were thoroughly investigated. The complete characterization involved in their potential energy surfaces are clearly presented by three or two-dimensional schemes.     

Theoretical investigation on the GaCl3-catalyzed ring-closing metathesis reaction of N-2,3-butadienyl-2-propynyl-1-amine: three-membered ring versus four-membered ring mechanism

The gallium chloride (GaCl(3))-catalyzed ring-closing metathesis reaction mechanism of N-2,3-butadienyl-2-propynyl-1-amine has been studied at the Becke three-parameter hybrid functional combined with Lee-Yang-Parr correlation functional (B3LYP)/6-31G(d), B3LYP/6-31+G(d,p), B3LYP/6-311++G(d,p)//B3LYP/ 6-31G(d) and the second-order M?ller-Plesset perturbation (MP2)/6-311++G(d,p)//B3LYP/6-31+G(d,p) levels. It was found that the final metathesis product can be yielded via a three-membered or four-membered ring mechanism. The three-membered ring pathway is favorable due to its low energy barrier at the rate determining step. The whole reaction is stepwise and strongly exothermic.     

Inductive effects in radicals calculated from DFT energies; substituted bicyclo[2.2.2]octan-1-yloxy radicals

Energies of a series of 4-substituted 1-oxybicyclo[2.2.2]octan-1-yloxy radicals with 18 various substituents were calculated within the framework of the DFT theory at the levels UB3LYP/6-311+G(d,p)//UB3LYP/6-311+G(d,p) and UB3LYP/6-311++G(2df,p)//UB3LYP/6-311+G(d,p) and compared with similar series of the parent alcohols, their deprotonated and protonated forms calculated at the levels B3LYP/6-311+G(d,p)//B3LYP/6-311+G(d,p) and B3LYP/6-311++G(2df,p)//B3LYP/6-311+G(d,p). The two levels are of the same performance and both are sufficient for molecules of this type according to comparison with scarce experimental gas-phase acidities and basicities. The substituent effects were analyzed in terms of isodesmic equations. In addition to strong dependence on the substituent inductive effect, a slight dependence on the electronegativity of the first atom of the substituent was proven in certain cases. In all aspects, there is no qualitative difference between the effects on radicals and on similar closed shell species. Radicals behave as slightly electron deficient; the substituent effect is weaker than that on the ions but stronger than on neutral molecules.     

Protonated nitro group: structure, energy and conjugation

Structure of protonated nitro compounds was investigated by calculations at the levels MP2(FC)/6-311++G(2d,2p)//MP2(FC)/6-311++G(2d,2p)(nitromethane and reference compounds) or B3LYP/6-311+G(d,p)//B3LYP/6-311+G(d,p)(nitrobenzene and its 18 meta- and para-substituted derivatives). The group NO2H+ reveals many similarities with the isoelectronic group CO2H as the preferred conformation, conformational equilibrium, and stabilization by interaction (resonance) within the group quantified by means of isodesmic reactions. However, there is a difference in the interaction with donor groups (for instance in 4-nitroaniline) that is much stronger with NO2H+ than with CO2H. This interaction may be called resonance and may be described by standard resonance formulas, but these formulas predict only partially the geometry and cannot explain the great interaction energy.     

Relative stability of major types of beta-turns as a function of amino acid composition: a study based on Ab initio energetic and natural abundance data

Folding properties of small globular proteins are determined by their amino acid sequence (primary structure). This holds both for local (secondary structure) and for global conformational features of linear polypeptides and proteins composed from natural amino acid derivatives. It thus provides the rational basis of structure prediction algorithms. The shortest secondary structure element, the beta-turn, most typically adopts either a type I or a type II form, depending on the amino acid composition. Herein we investigate the sequence-dependent folding stability of both major types of beta-turns using simple dipeptide models (-Xxx-Yyy-). Gas-phase ab initio properties of 16 carefully selected and suitably protected dipeptide models (for example Val-Ser, Ala-Gly, Ser-Ser) were studied. For each backbone fold most probable side-chain conformers were considered. Fully optimized 321G RHF molecular structures were employed in medium level [B3LYP/6-311++G(d,p)//RHF/3-21G] energy calculations to estimate relative populations of the different backbone conformers. Our results show that the preference for beta-turn forms as calculated by quantum mechanics and observed in Xray determined proteins correlates significantly.     

Kinetics of the multichannel reaction of methanethiyl radical (CH3S*) with 3O2

The CH3S* + O2 reaction system is considered an important process in atmospheric chemistry and in combustion as a pathway for the exothermic conversion of methane-thiyl radical, CH3S*. Several density functional and ab initio computational methods are used in this study to determine thermochemical parameters, reaction paths, and kinetic barriers in the CH3S* + O2 reaction system. The data are also used to evaluate feasibility of the DFT methods for higher molecular weight oxy-sulfur hydrocarbons, where sulfur presents added complexity from its many valence states. The methods include: B3LYP/6-311++G(d,p), B3LYP/6-311++G(3df,2p), CCSD(T)/6-311G(d,p)//MP2/6-31G(d,p), B3P86/6-311G(2d,2p)//B3P86/6-31G(d), B3PW91/6-311++G(3df,2p), G3MP2, and CBS-QB3. The well depth for the CH3S* + 3O2 reaction to the syn-CH3SOO* adduct is found to be 9.7 kcal/mol. Low barrier exit channels from the syn-CH3SOO* adduct include: CH2S + HO2, (TS6, E(a) is 12.5 kcal/mol), CH3 + SO2 via CH3SO2 (TS2', E(a) is 17.8) and CH3SO + O (TS17, E(a) is 24.7) where the activation energy is relative to the syn-CH3SOO* stabilized adduct. The transition state (TS5) for formation of the CH3SOO adduct from CH3S* + O2 and the reverse dissociation of CH3SOO to CH3S* + O2 is relatively tight compared to typical association and simple bond dissociation reactions; this is a result of the very weak interaction. Reverse reaction is the dominant dissociation path due to enthalpy and entropy considerations. The rate constants from the chemical activation reaction and from the stabilized adduct to these products are estimated as functions of temperature and pressure. Our forward rate constant and CH3S loss profile are in agreement with the experiments under similar conditions. Of the methods above, the G3MP2 and CBS-QB3 composite methods are recommended for thermochemical determinations on these carbon-sulfur-oxygen systems, when they are feasible.     

Proton affinities of ketones, vicinal diketones and α-keto esters: a computational study

The proton affinities of seven different ketones, vicinal diketones, and α-keto esters (acetophenone, 2,2,2-trifluoroacetophenone, 2,3-butanedione, 1-phenyl-1,2-propanedione, methyl pyruvate, ethyl benzoylformate, and ketopantolactone) have been evaluated theoretically using the conventional ab initio HF and several post-HF methods (MP2, MP4, CCSD), density functional methods with the B3LYP hybrid functional, as well as some ab initio model chemistries [CBS-4M, G2(MP2), and G3(MP2)//B3LYP]. The chemical compounds studied are frequently used substrates in the asymmetric hydrogenation over chirally modified platinum catalysts where the protonation properties of the chiral modifier and the substrates are of great interest. In most cases, the proton affinities (PAs) evaluated with the CCSD/6-311+G(d,p)//B3LYP/TZVP and G2(MP2) methods are in good agreement with the existing experimental ones. However, the previously reported PA of 2,3-butanedione seems to be too high by 10-15 kJ mol⁻¹. The B3LYP/TZVP//B3LYP/TZVP and MP2/6-311+G(d,p)//B3LYP/TZVP model chemistries predict proton affinities that are systematically higher and lower than the experimental PAs, respectively. If proton affinities are evaluated as the average of the PAs calculated with these two theoretical methods a very good agreement with the experimental results is obtained. The mean absolute deviation (MAD) from experiment of this combination method for the PAs of 13 test molecules is 4.0 kJ mol⁻¹. For 9 molecules composed only of first-row atoms the MAD is 2.5 kJ mol⁻¹. The B3LYP/TZVP//B3LYP/TZVP and MP2/6-311+G(d,p)//B3LYP/TZVP methods provide significant savings in computational time and disk space compared to the CCSD/6-311+G(d,p)//B3LYP/TZVP and G2(MP2) models. Therefore, it is suggested that if no experimental or highly accurate theoretical data is available (due to computational cost), the proton affinities of similar compounds as investigated in this paper, can be evaluated with the combination method. For the studied molecules, this method gives the following PAs (in kJ mol⁻¹): 788 (2,3-butanedione, exptl 802); 798 (2,2,2-trifluoroacetophenone, exptl 799); 811 (ketopantolactone); 813 (methyl pyruvate); 825 (1-phenyl-1,2-propanedione); 862 (acetophenone, exptl 861); 865 (ethyl benzoylformate).     

Flexibility of "polyunsaturated fatty acid chains" and peptide backbones: A comparative ab initio study

The conformational properties of omega-3 type of polyunsaturated fatty acid (PUFA) chains and their fragments were studied using Hartree-Fock (RHF/3-21G) and DFT (B3LYP/6-31G(d)) methods. Comparisons between a unit (U) fragment of the PUFA chain and a mono N-Ac-glycine-NHMe residue show that both structures have the same sequence of sp2-sp3-sp2 atoms. The flexibility of PUFA originates in the internal rotation about the above pairs of sigma bonds. Therefore, potential energy surfaces (PESs) were generated by a scan around the terminal dihedral angles (phi t1 and phi t2) as well as the phi 1 and psi 1 dihedrals of both 1U congeners (Me-CHCH-CH2-CHCHMe and MeCONH-CH2-CONHMe) at the RHF/3-21G level of theory. An interesting similarity was found in the flexibility between the cis allylic structure and the trans peptide models. A flat landscape can be seen in the cis 1U (hepta-2,5-diene) surface, implying that several conformations are expected to be found in this (PES). An exhaustive search carried out on the 1U and 2U models revealed that straight chain structures such as trans and cis beta (phi 1 approximately psi 1 approximately 120 degrees; phi 2 approximately psi 2 approximately -120 degrees) or trans and cis extended (phi 1 approximately psi 1 approximately phi 2 approximately psi 2 approximately 120 degrees) can be formed at the lowest energy of both isomers. However, forming helical structures, such as trans helix (phi 1 approximately -120 degrees, psi 1 approximately 12 degrees; phi 2 approximately -120 degrees, psi 2 approximately 12 degrees) or cis helix (phi 1 approximately -130 degrees, psi 1 approximately 90 degrees; phi 2 approximately -145 degrees, psi 2 approximately 90 degrees) will require more energy. These six conformations, found in 2U, were selected to construct longer chains such as 3U, 4U, 5U, and 6U to obtain the thermochemistry of secondary structures. The variation in the extension or compression of the chain length turned out to be a factor of 2 between the helical and nonhelical structures. The inside diameter of the "tube" of cis helix turned out to be 3.5 A after discounting the internal H atoms. Thermodynamic functions were computed at the B3LYP/6-311+G(2d,p)//B3LYP/6-31G(d). The cis-trans isomerization energy of 1.7 +/- 0.2 kcal mol(-1) unit(-1) for all structure pairs indicates that the conformer selection was consistent. A folding energy of 0.5 +/- 0.1 kcal mol(-1) unit(-1) has been extracted from the energy comparison of the helices and most extended nonhelical structures. The entropy change associated with the folding (Delta S(folding)) is decreases faster with the degree of polymerization (n) for the cis than for the trans isomer. As a consequence, the linear relationships between (Delta G(folding)) and n for the cis and trans isomer crossed at about n = 3. This suggested that the naturally occurring cis isomer less ready to fold than the trans isomer since a greater degree of organization is exhibited by the cis isomer during the folding process. The result of this work leads to the question within the group additivity rule: could the method applied in our study of the folding of polyallylic hydrocarbons be useful in investigating the thermochemistry of protein folding?     

1,3,5-三硝基苯在高岭石表面吸附的理论研究

构造了高岭石硅氧层和铝氧层的团簇模型(分别为Si₁₃O₃₇H₂₂和Al₆O₂₄H₃₀), 并分别在B3LYP/6-31G(d), MP2/6-31G(d)//B3LYP/6-31G(d)和B3LYP/6-311++G(d,p)//B3LYP/6-31G(d)理论水平上对1,3,5-三硝基苯(TNB)在高岭石表面的吸附性质(如优化的几何构型、 结构参数、 吸附能、 振动频率、 静电势和分子轨道等)进行了研究. 结果表明, TNB和硅氧层表面间的相互作用以静电和范德华相互作用为主; TNB与铝氧层间的相互作用以氢键为主, 且TNB和铝氧层间相互作用的能量更低, 结构更稳定.     

Theoretical and experimental study of the absolute configuration of helical structure of (2R,3S)-Rubiginone A2 analog

A novel analogue of (2R,3S)-Rubiginone A₂ was synthesized as a chiral helical model compound via an eight-step procedure (2.7% overall yield). Quantum methods, such as density functional theory (DFT) at different basis sets of 6-311+(d), 6-311++G(2d,p), were used to compute its optical rotation and electronic circular dichroism at the B3LYP/6-311++G(2d,p) level in the gas phase and in solution using PCM model, respectively. UV corrections were performed in electronic circular dichroism (ECD) simulations to match the experimental ECD well. The suitable computational methods, e.g., B3LYP/6-311++G(2d,p)//B3LYP/6-311++G(2d,p) in the gas phase using zero-point energy in Boltzmann statistics, were found and suggested for optical rotation and circular dichroism computations that can be used for absolute configuration determination of chiral helical compounds.     

Hydride affinity scale of various substituted arylcarbeniums in acetonitrile

Combined with the integral equation formalism polarized continuum model (IEFPCM), the hydride affinities of 96 various acylcarbenium ions in the gas phase and CH(3)CN were estimated by using the B3LYP/6-31+G(d)//B3LYP/6-31+G(d), B3LYP/6-311++G(2df,2p)//B3LYP/6-31+G(d), and BLYP/6-311++G(2df,2p)//B3LYP/6-31+G(d) methods for the first time. The results show that the combination of the BLYP/6-311++G(2df,2p)//B3LYP/6-31+G(d) method and IEFPCM could successfully predict the hydride affinities of arylcarbeniums in MeCN with a precision of about 3 kcal/mol. On the basis of the calculated results from the BLYP method, it can be found that the hydride affinity scale of the 96 arylcarbeniums in MeCN ranges from -130.76 kcal/mol for NO(2)-PhCH(+)-CN to -63.02 kcal/mol for p-(Me)(2)N-PhCH(+)-N(Me)(2), suggesting most of the arylcarbeniums are good hydride acceptors. Examination of the effect of the number of phenyl rings attached to the carbeniums on the hydride affinities shows that the increase of the hydride affinities takes place linearly with increasing number of benzene rings in the arylcarbeniums. Analyzing the effect of the substituents on the hydride affinities of arylcarbeniums indicates that electron-donating groups decrease the hydride affinities and electron-withdrawing groups show the opposite effect. The hydride affinities of arylcarbeniums are linearly dependent on the sum of the Hammett substituent parameters σ(p)(+). Inspection of the correlation of the solution-phase hydride affinities with gas-phase hydride affinities and aqueous-phase pK(R)(+) values reveals a remarkably good correspondence of ΔG(H(-)A)(R(+)) with both the gas-phase relative hydride affinities only if the α substituents X have no large electron-donating or -withdrawing properties and the pK(R)(+) values even though the media are dramatically different. The solution-phase hydride affinities also have a linear relationship with the electrophilicity parameter E, and this dependence can certainly serve as one of the most effective ways to estimate the new E values from ΔG(H(-)A)(R(+)) or vice versa. Combining the hydride affinities and the reduction potentials of the arylcarbeniums, we obtained the bond homolytic dissociation Gibbs free energy changes of the C-H bonds in the corresponding hydride adducts in acetonitrile, ΔG(HD)(RH), and found that the effects of the substituent on ΔG(HD)(RH) are very small. Simple thermodynamic analytic platforms for the three C-H cleavage modes were constructed. It is evident that the present work would be helpful in understanding the nature of the stabilities of the carbeniums and mechanisms of the hydride transfers between carbeniums and other hydride donors.     

NMR spectra, GIAO and charge density calculations of five-membered aromatic heterocycles

The B3LYP/6-31+G(d) molecular geometry optimized structures of 17 five-membered heterocycles were employed together with the gauge including atomic orbitals (GIAO) density functional theory (DFT) method at the B3LYP/6-31+G(d,p), B3LYP/6-311++G(d,p) and B3LYP/6-311+G(2d,p) levels of theory for the calculation of proton and carbon chemicals shifts and coupling constants. The method of geometry optimization for pyrrole (1), N-methylpyrrole (2) and thiophene (7) using the larger 6-311++G(d,p) basis sets at the B3LYP/6-31+G(d,p), B3LYP/6-311++G(d,p), B3LYP/6-31+G(2d,p) and B3LYP/cc-pVTZ levels of theory gave little difference between calculated and experimental values of coupling constants. In general, the (1)H and 13C chemical shifts for all compounds are in good agreement with theoretical calculations using the smaller 6-31 basis set. The values of nJHH(n=3, 4, 5) and rmnJ(CH)(n=1, 2, 3, 4) were predicted well using the larger 6-31+G(d,p) and 6-311++G(d,p) basis sets and at the B3LYP/6-31+G(d,p), B3LYP/6-311++G(d,p), B3LYP/6-31+G(2d,2p) levels of theory. The computed atomic charges [Mülliken; Natural Bond Orbital Analysis (NBO); Merz-Kollman (MK); CHELP and CHELPG] for the B3LYP/6-311++G(d,p) geometry optimized structures of 1-17 were used to explore correlations with the experimental proton and carbon chemical shifts.     

The Dowd-Beckwith ring expansion: a theoretical study

UB3LYP/6-311++G(d,p) and ROMP2/6-311++G(d,p)//UB3LYP/6-311++G(d,p) calculations including the effect of benzene solvent through the PCM-UAHF method render a concerted mechanism without fragmentation as the most favourable one for the Dowd-Beckwith radical ring expansion of the bromomethyl adduct of methyl cyclopentanone-2-carboxylate to yield methyl cyclohexanone-3-carboxylate. The corresponding concerted TS is a bicyclic alcoxy radical.     

Conformationally averaged vertical detachment energy of finite size NO3(-)·nH2O clusters: a route connecting few to many

We report conformationally averaged VDEs (VDE(w)(n)) for different sizes of NO(3)(-)·nH(2)O clusters calculated by using uncorrelated HF, correlated hybrid density functional (B3LYP, BHHLYP) and correlated ab intio (MP2 and CCSD(T)) theory. It is observed that the VDE(w)(n) at the B3LYP/6-311++G(d,p), B3LYP/Aug-cc-Pvtz and CCSD(T)/6-311++G(d,p) levels is very close to the experimentally measured VDE. It is shown that the use of calculated results of the conformationally averaged VDE for small-sized solvated negatively-charged clusters and a microscopic theory-based general expression for the same provides a route to obtain the VDE for a wide range of cluster sizes, including bulk.     

乙醇-水分子团簇C2H5OH(H2O)n (n=1-9)稳定结构的量子化学研究

采用密度泛函理论B3LYP方法, 在B3LYP/6-311++G(2d,2p)//B3LYP/6-311++G(d,p)基组水平上对乙醇-水分子团簇(C₂H₅OH(H₂O)_n (n=1-9))的各种性质进行研究, 如: 优化的几何构型、结构参数、氢键、结合能、平均氢键强度、自然键轨道(NBO)电荷分布、团簇的生长规律等. 结果表明, 从二维(2-D)环状结构到三维(3-D)笼状结构的过渡出现在n=5的乙醇-水分子团簇中. 此外, 利用团簇结合能的二阶差分、形成能、能隙等性质, 发现在n=6时乙醇-水分子团簇的最低能量结构稳定性较好, 可能为幻数结构. 最后, 为了进一步探讨氢键本质, 将C₂H₅OH(H₂O)_n (n=2-9)最低能量结构的各种性质与纯水分子团簇(H₂O)_n (n=3-10)比较, 结果表明前者与后者中的水分子之间氢键相似.     

Modern valence-bond description of chemical reaction mechanisms: the 1,3-dipolar addition of diazomethane to ethene

The electronic mechanism for the gas-phase concerted 1,3-dipolar cycloaddition of diazomethane (CH2N2) to ethene (C2H4) is described through spin-coupled (SC) calculations at a sequence of geometries along the intrinsic reaction coordinate obtained at the MP2/6-31G(d) level of theory. It is shown that the bonding rearrangements occurring during the course of this reaction follow a heterolytic pattern, characterized by the movement of three well-identifiable orbital pairs, which are initially responsible for the pi bond in ethene and the C-N pi bond and one of the N-N pi bonds in diazomethane and are retained throughout the entire reaction path from reactants to product. Taken together with our previous SC study of the electronic mechanism of the 1,3-dipolar cycloaddition of fulminic acid (HCNO) to ethyne (C2H2) (Theor. Chim. Acc. 1998, 100, 222), the results of the present work suggest strongly that most gas-phase concerted 1,3-dipolar cycloaddition reactions can be expected to follow a heterolytic mechanism of this type, which does not involve an aromatic transition state. The more conventional aspects of the gas-phase concerted 1,3-dipolar cycloaddition of diazomethane to ethene, including optimized transition structure geometry, electronic activation energy, activation barrier corrected for zero-point energies, standard enthalpy, entropy and Gibbs free energy of activation, have been calculated at the HF/6-31G(d), B3LYP/6-31G(d), MP2/6-31G(d), MP2/6-31G(d,p), QCISD/6-31G(d) and CCD/6-31G(d) levels of theory. We also report the CCD/6-311++G(2d, 2p)//CCD/6-31G(d), MP4(SDTQ)/6-311++G(2d,2p)//CCD/6-31G(d) and CCSD(T)/6-311++G(2d, 2p)//CCD/6-31G(d) electronic activation energies.