Synthesis and thermal properties of liquid-crystalline polyacrylates containing a carbazolyl group in the mesogen

The new acrylate monomers 4-(ω-acryloyloxyalkyloxy)-N-(9-methyl-2-carbazolylmethylene) anilines containing from 2 to 11 methylenic units in their alkyl group and a carbazolyl group in the mesogenic unit were synthesized and polymerized by azobisisobutyronitrile (AIBN) as radical initiator and by low-energy electron beam (EB) initiation. The thermal properties of the resulting polymers were examined using differential scanning calorimetry and thermal optical polarizing microscopy. The polymer prepared by AIBN with a hexamethylene spacer exhibited a nematic phase from 73 to 170°C and with an undecamethylene spacer exhibited a smectic phase from 55 to 202°C. The isotropization temperature of the polyacrylates increased with increasing the number of carbons of the methylenic spacer. The yield of the resulting polymer was changed by EB irradiation temperature from 4.5 to 41%. The highest yield was obtained when the monomer was polymerized in a liquid-crystalline phase. The same tendency was observed in the molecular weight of the resulting polymers. © 1994 John Wiley & Sons, Inc.     

Aromatic polyethers,polysulfones, and polyketones as laminating resins. II

1,3-Bis(p-phenoxybenzenesulfonyl)benzene and 4,4′-bis(p-phenoxybenzenesulfonyl)-diphenyl ether were polymerized with isophthaloyl and terephthaloyl chloride in Friedel-Crafts type polymerizations. These polymers had 5-cyanoisophthaloyl units in the backbone, obtained by using 5-cyanoisophthaloyl chloride as part of the acid chloride monomer. A number of catalysts were screened to effect the trimerization of the pendant nitrile groups in the polymer to the triazines. Model reactions were carried out for each polymer. Physical and thermal properties of the laminates obtained from these polymers are discussed.     

Syntheses of vinyl polymers containing the N-phenothiazinyl group in the side chain

Four kinds of vinyl polymers containing N-substituted phenothiazinyl groups in side chains were obtained by syntheses of the respective monomers and subsequent polymerizations. Thus, N-acrylamidomethylphenothiazine, N-(N-acrylamidomethyl)carbamoylethyl phenothiazine, β-(N-phenothiazinyl)ethyl acrylate and methacrylate, and β-(N-phenothiazinyl)ethyl vinyl ether were synthesized. It was found that all monomers except the last monomer can be polymerized with typical free-radical initiators such as α,α′-azobisisobutyronitrile to afford stable soluble polymers with electron-donating characteristics, presumably due to the absence of a hydrogen atom at the site of the nitrogen atom of the phenothiazinyl group. The last monomer was found to be susceptible to typical cationic initiators such as boron trifluoride etherate to afford a stable soluble polymer also with the electron-donating characteristic.     

The preparation of novel silica modified polyimide membranes: synthesis,characterization, and gas separation properties

In this study, new monomers having siloxane groups were synthesized as an intermediate for preparation of siloxane modified polyimide polymers. Then with these monomers, the synthesis of uncrosslinked and crosslinked polyimide–siloxane hybrid polymer membranes were achieved. The purposes of the preparation of modified polyimides were to modify the thermal and chemical stability, and mechanical strength of polyimides, and to improve the gas separation properties of polymers. The new diamine monomer having siloxane groups was prepared from 3,5‐diaminobenzoic acid (3,5‐DABA) and 3‐aminopropyltrimethoxysilane (3‐APTMS) in N‐methyl‐2‐pyrollidone (NMP) at 180°C. The modified polyimide membranes having different amount of siloxane groups were synthesized from pyromellitic dianhydride (PMDA), 4,4‐oxydianiline (ODA), and 3,5‐diaminobenzamido‐N‐propyltrimethoxy silane (DABA/PTMS) in NMP using a two‐step thermal imidization process. The synthesis of modified polyimide membranes were characterized by Fourier transform infrared spectroscopy (FTIR). The thermal analysis of the polyimides were carried out by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Water absorption and swelling experiments were also carried out for the investigation of structural properties of polymers. FTIR observations confirmed that the polyimide membranes with new diamine intermediate were successfully obtained. Thermal analysis showed that the uncrosslinked copolyimides exhibited two glass transition temperatures, indicating that they were separated microphases and it was found that all the modified copolyimides had showed higher glass transition temperature (T_g) than unmodified polyimides. The separation properties of the prepared polyimide membranes were also characterized by permeability for O₂ and N₂ gases and ideal selectivity values were calculated. Copyright © 2009 John Wiley & Sons, Ltd.     

Thermal and radiation-induced polymerizations of N-tert-butylacrylamide and (N-tert-butylacrylamide)2–ZnCl2 complex

The thermal and radiation-induced in-source and postirradiation polymerizations of N-tert-butylacrylamide and (N-tert-butylacrylamide)₂–ZnCl₂ complex of this monomer were studied at various temperatures. In in-source, solid-state polymerizations of monomer and complex the conversion was about 95% at 21°C in about eight days. Their postirradiation polymerizations were also studied in solid state. The conversion-time curves of these two systems show an autoacceleration as in-source polymerization. In both types of polymerization the overall rate of polymerization of complex was higher than that of pure monomer at the same polymerization temperature. In investigations of the thermal polymerization of N-tert-butylacrylamide and ZnCl₂-complex it was observed that the ZnCl₂-complex system can be polymerized in air in the molten and solid state. The conversion of monomer to polymer reaches limiting values in solid state in about 1 hr. The thermal polymerization of ZnCl₂-complex in the molten state was also studied and 100% conversion was obtained in 30 min. The thermal polymerization of pure monomer was studied in vacuum and an appreciable amount of polymer was obtained in the molten state; however, the thermal polymerization of this monomer is negligible in solid state. In this work rates of polymerization for N-tert-butylacrylamide and (N-tert-butylacrylamide)₂–ZnCl₂ are compared under various experimental conditions and overall activation energies are calculated.     

Water soluble,conjugated main chain azo polymer: Synthesis and characterization

The monomer 2,5-diaminobenzenesulfonic acid has been polymerized to a high molecular weight, conjugated main chain azo polymer. The presence of the azo group in the polymer was confirmed using Raman spectroscopy. The polymer is highly soluble in water over a wide pH range. It is also soluble in common polar organic solvents such as N,N-dimethylformamide, dimethyl sulfoxide and N-methyl-2-pyrrolidone.     

Synthesis and characterization of poly[N-((10-phenothiazinyl)-6-hexanoyl)ethylenimine] and N,N-diethyl-6-(10-phenothiazinyl)-hexanamide

A new oxazoline monomer was made containing a chloroalkyl substituent which can be transformed to other functional groups by nucleophilic substitution. Oxazoline monomer containing the N-phenothiazinyl substituent was made by reacting lithiated phenothiazine with the chloroalkyl substituted oxazoline and subsequently polymerized. N,N-diethyl-6-chlorohexanamide was synthesized and N,N-diethyl-6-(10-phenothiazinyl)-hexanamide, a model compound for the phenothiazine polymer, was made by reacting lithiated phenothiazine with this chloroamide. TCNQ did not complex with the polymer. The iodine and perchlorate complexes of the phenothiazine polymer had conductivities of 4.4 × 10 ^?8 and 6.9 × 10^?6 S/cm, respectively, at room temperature. Each of these are higher than the corresponding values reported for complexes of the analogous model compounds or 3-substituted phenothiazine polymer reported earlier.¹³, ²² This was attributed to the very short chain repeat distance for the present, symmetrically substituted polymer.     

Novel N‐methylbenzothiazolium salts as hardeners for epoxy and acrylate monomers

Novel N‐methylbenzothiazolium salts [N‐methyl‐2‐benzylthiobenzothiazolium, N‐methyl‐2‐(4‐nitrobenzylthio)benzothiazolium, N‐methyl‐2‐(1‐ethoxycarbonylethylthio)benzothiazolium, and N‐methyl‐2‐methylthiobenzothiazolium hexafluoroantimonates] were synthesized by the reaction of the corresponding 2‐substituted benzothiazole with dimethylsulfate, followed by anion exchange with KSbF₆. These benzothiazolium salts cationically polymerized an epoxy monomer by photoirradiation. They also polymerized an acrylate monomer via a photoradical process. The use of aromatic compounds such as 2‐ethyl‐9,10‐dimethoxyanthracene as photosensitizers was effective in enhancing the polymerization. These benzothiazolium salts also served as thermal cationic initiators. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3828–3837, 2003     

Synthesis,polymerization, and effects on the flame retardancy of boron‐containing styrenic monomers

A boron‐containing styrenic monomer, 5‐benzyl‐2‐phenyl‐5‐(4‐vinylbenzyl)‐[1,3,2]‐dioxaborinane, was synthesized to study the influence of boron on the properties of the homopolymer and copolymer with styrene. A similar monomer without boron was also prepared and polymerized so that the properties of its polymer could be compared with the aforementioned boron‐containing polymers. These monomers were characterized by elemental analysis, mass spectrometry, Fourier transform infrared, and ¹H and ¹³C NMR. The thermal degradation of boron‐containing styrenic polymers was studied by means of Fourier transform infrared, which showed the presence of boric acid as char. The flame‐retardant effect was assessed by the measurement of the limiting oxygen indices and char yields during heating in nitrogen and air. The boron‐containing polymers had higher limiting oxygen indices and gave greater yields of char than those without boron. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem43: 6419–6430, 2005     

Synthesis and polymerization of a novel perfluorinated monomer

Perfluoro(5-methylene-2,2-dimethyl-1,3-dioxolane) (1) was synthesized by utilizing a direct fluorination reaction. Compound 1 was an entirely novel monomer with difluoromethylene at position 5 on the dioxolane ring as an unprecedented polymerization site. It successfully polymerized with tetrafluoroethylene to afford copolymers, which had T_g values in the range of 60-90 °C. The content of monomer 1 in the obtained polymers was less than 20 mol%, which seemed insufficient for giving various unique properties to polymers. However, each polymer was expected to be a superior material because of their advanced thermal stability. Comparison with copolymers of 2,2-bis(trifluoromethyl)-4,5-difluoro-1,3-dioxole and tetrafluoroethylene is also discussed.     

Polymerizations of some diene monomers. Preparations and polymerizations of vinyl methacrylate,allyl methacrylate,N-allylacrylamide,and N-allylmethacrylamide

Vinyl methacrylate, allyl methacrylate, N-allylacrylamide, and N-allylmethacrylamide were prepared, and these monomers were polymerized in toluene by α,α-azobisisobutyronitrile catalyst. Cyclization content of poly(vinyl methacrylate) was estimated by infrared spectroscopy to be 50–60% at low conversions, but at the high conversions, due to gelation the polymers were insoluble in the usual organic solvents. Allyl methacrylate did not produce any soluble polymer, even at a low conversion, in contrast with poly-(vinyl methacrylate). Poly-N-allylacrylamide and poly-N-allylmethacrylamide were also insoluble in common solvents. It was assumed that the polymers from monomers containing the allyl group might form crosslinks as a result of allyl resonance stabilization.     

In vitro antibacterial and antifungal assay of poly‐(ethylene oxamide‐N,N′‐diacetate) and its polymer–metal complexes

A new polyester, poly‐(ethylene oxamide‐N,N′‐diacetate) (PEODA), containing glycine moiety was synthesized by the reaction of oxamide‐N,N′‐diacetic acid and ethylene glycol and its polymer–metal complexes were synthesized with transition metal ions. The monomer oxamide‐N,N′‐diacetic acid was prepared by the reaction of glycine and diethyl oxalate. The polymer and its metal complexes were characterized by elemental analysis and other spectroscopic techniques. The in vitro antibacterial activities of all the synthesized polymers were investigated against some bacteria and fungi. The analytical data revealed that the coordination polymers of Mn(II), Co(II) and Ni(II) are coordinated with two water molecules, which are further supported by FTIR spectra and TGA data. The polymer–metal complexes showed excellent antibacterial activities against both types of microorganisms; the polymeric ligand was also found to be effective but less so than the polymer–metal complexes. On the basis of the antimicrobial behavior, these polymers may be used as antifungal and antifouling coating materials in fields like life‐saving medical devices and the bottoms of ships. Copyright © 2007 John Wiley & Sons, Ltd.     

Polymerization of an azastyrene derivative, 1. 1,6-addition polymerization of 2,6-diisopropyl-N-methyleneaniline

The polymerizability of an azastyrene derivative, 2,6-diisopropyl-N-methyleneaniline (DiPMAn), was studied. Although DiPMAn could not be polymerized by radical and anionic initiators, it was polymerized with cationic initiators, such as trifluoroacetic acid (TFA), TiCl₄-TFA, and SnCl₄-TFA. The polymer is formed by 1,6-addition with electrophilic substitution of an activated monomer in para-position of the aromatic ring.     

Porous,bicontinuous, and cationic polyelectrolyte obtained by high internal phase emulsion polymerization

In this work, a cationic polyelectrolyte was synthesized through oil‐in‐water high internal phase emulsion polymerization. The porous polymer was obtained using the monomer (4‐vinyl benzyl)trimethylammonium chloride and cross‐linked with N,N‐methylene‐bis‐acrylamide; additionally, ethylene glycol dimethacrylate (EGDMA) was used as the second cross‐linker, which was solubilized in the discontinuous phase leading to a bicontinuous‐like HIPE system because of the characteristics of this cross‐linker and the phase, where polymerized several effects on the polyHIPE were expected. In this way, the effect of the emulsifier and EGDMA content on the pore size, swelling, and rheological properties was assessed. It was observed that an increased concentration of the emulsifier in the polymerization decreased the pore size, narrowed its size distribution, and diminished the swelling capacity of the polymer. Additionally, the poly (HIPE) displayed a close‐cell structure explained by the locus of initiation starting from the droplets of the emulsion. After the addition of EGDMA, the polymer exhibited a major decrease in pore size and a significant decrease in swelling attributed to the polymerized skin layer on the droplet and hydrophobicity provided by the polyEGDMA, respectively. Rheological assays revealed an increase in the complex modulus and shear stress as the pore size decreased, but the addition of EGDMA did not produce an increase in the modulus, as expected. Finally, the sorption capabilities of the cationic porous polymers were evaluated through kinetic and isotherm sorption experiments using the anionic dye Acid Black 24.     

Amine-quinone polyurethanes: Preparation of polyurethane segmented block copolymers containing 2,5-bis(N-2-hydroxyethyl-N-methylamino)-1,4-benzoquinone,toluene diisocyanate,and an oligomeric polyether diol

The amine-quinone diol monomer 2,5-bis(N-2-hydroxyethyl-N-methylamino)-1,4-benzoquinone (AQM-1) was prepared by the condensation of 2-(N-methylamino)ethanol with hydroquinone in the presence of oxygen and copper(II) chloride. This crystalline monomer was used to prepare a series of amine-quinone polyurethanes by condensation polymerization, either in the melt or in DMF solution, with toluene diisocyante and an oligomeric diol either poly(1,2-butylene glycol) or polytetrahydrofuran. The amine-quinone functional group was incorporated into the polymer mainchain, giving red-brown polyurethanes that had molecular weights in the range of 20,000–80,000 and were soluble in THF, MEK, DMF, and DMSO. The thermal properties were consistent with a two-phase morphology with an amorphous soft segment, containing the oligomeric diol, and a microcrystalline hard segment, containing AQM-1. These polymers had a high affinity for the surface of commercial iron particles used in state of the art magnetic tape and prevented the corrosion of the particles. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2339–2345, 1999     

Synthesis and characterization of aromatic cyclolinear phosphazene polyetherketones containing bis‐Spiro‐substituted cyclotriphosphazene unit

A novel monomer, 2,2‐bis‐(4′‐fluorobenzoylphenoxy)‐4,4,6,6‐bis[spiro‐(2′,2″‐dioxy‐1′, 1′‐biphenylyl)] cyclotriphosphazene, was synthesized and polymerized with 4,4′‐difluorobenzophenone as a comonomer and 4,4′‐isopropylidenediphenol or 4,4′‐(hexafluoroisopropylidene) diphenol in N,N‐dimethylacetamide at 162 °C for 4 h to give two series of aromatic cyclolinear phosphazene polyetherketones containing bis‐spiro‐substituted cyclotriphosphazene groups. The structure of the monomer was confirmed by ¹H, ¹³C, and ³¹P NMR. The effect of the incorporation of the bis‐spiro‐substituted cyclotriphosphazene group on the thermal properties of these polymers was investigated by DSC and thermogravimetric analysis. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2993–2997, 2001     

Preparation and characterization of side-chain liquid crystalline polymers containing chenodeoxycholic acid residue

A series of new side-chain liquid crystalline polymers containing chenodiol residue derived from 24-[4′-hydroxybiphenyl-4-yl-4-(allyloxy)benzoyloxy]-3α,7α-di{n-[4′-(4-ethoxybenzoyloxy)biphenyl-4-yloxy]-n-oxoalkanoyloxy}-5β-cholane was designed and prepared. The chemical structures of the monomer and polymer were confirmed by Fourier transform infrared and ¹H NMR spectra. The mesomorphic properties of monomer and polymer were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy, and X-ray diffraction. The side-chain liquid crystalline polymers revealed wide mesophase temperature range and high thermal stability, and they showed nematic liquid crystalline phase. The influence of flexible space group length on thermal properties and specific rotation was examined.     

Synthesis and characterization of NLO chromophores bearing poly(1,6-heptadiyne)s for electro-optic application

We utilized the metathesis reaction to synthesize a new type of multifunctional polymer that contains a conjugated backbone and a second-order NLO chromophore as a pendant group. The 1,6-heptadiyne derivatives bearing NLO chromophores were easily polymerized by using a metathesis catalyst to give corresponding polymers with large optical nonlinearities. Molecular structural characterizations for the resulting polymers were achieved by ¹H- and ¹³C-NMR, FTIR, and UV-visible spectroscopies. Soluble polymers were obtained up to 72 mol % of chromophore monomer portion in the copolymer. These amorphous polymers exhibited good film-forming abilities and thermal stability. The electro-optic coefficient, r₃₃, of the poled polymer films was in the range of 0.5–10.1 pm/V, and the nonresonant values of the third-order NLO coefficient, χ⁽³⁾ was found to be about 10⁻¹¹ esu. © 1996 John Wiley & Sons, Inc.     

A systematic study of stereochemical effects in homologous poly(alkenamer)s: Dewar benzene versus norbornene

Two diastereomeric derivatives of norbornene, dimethyl (1R,2R,3S,4S)-bicyclo[2.2.1]hept-5-ene-2,3-dicarboxylate and dimethyl (1R,2S,3S,4S)-bicyclo[2.2.1]hept-5-ene-2,3-dicarboxylate, were synthesized and polymerized using ring-opening metathesis polymerization (ROMP). For comparative purposes, diastereomeric derivatives of Dewar benzene, dimethyl (1R,2S,3R,4S)-bicyclo[2.2.0]hex-5-ene-2,3-dicarboxylate and dimethyl (1R,2S,3S,4S)-bicyclo[2.2.0]hex-5-ene-2,3-dicarboxylate, were also synthesized and polymerized using ROMP. The polymerization reactions proceeded in a controlled manner as evidenced in part by linear relationships between the monomer-to-catalyst feed ratios and the molecular weights of the polymer products. Chain extension experiments were also conducted which facilitated the formation of block copolymers. Although the poly(norbornene) derivatives exhibited glass transition temperatures that were dependent on their monomer stereochemistry (cis: 115°C vs. trans: 125°C), more pronounced differences were observed upon analysis of the polymers derived from Dewar benzene (cis: 70°C vs. trans: 95°C). Likewise, microphase separation was observed in block copolymers that were prepared using the diastereomeric monomers derived from Dewar benzene but not in block copolymers of the norbornene-based diastereomers. The differential thermal properties were attributed to the relative monomer sizes as reducing the distances between the polymer backbones and the pendant stereocenters appeared to enhance the thermal effects.     

Hydroxyl‐ and amine‐terminated hyperbranched polyurethanes using AB2‐type azide monomers: Synthesis,characterization, fluorescence,and charge‐transfer complexation studies

Novel AB₂‐type azide monomers such as 3,5‐bis(4‐methylolphenoxy)carbonyl azide (monomer 1) , 3,5‐bis(methylol)phenyl carbonyl azide (monomer 2) , 4‐(methylol phenoxy) isopthaloyl azide (monomer 3) , and 5‐(methylol) isopthaloyl azide (monomer 4) were synthesized. Melt and solution polymerization of these monomers yielded hydroxyl‐ and amine‐terminated hyperbranched polyurethanes with and without flexible ether groups. The structures of theses polymers were established using FT‐IR and NMR spectroscopy. The molecular weights (M_w) of the polymers were found to vary from 3.2 × 10³ to 5.5 × 10⁴ g/mol depending on the experimental conditions used. The thermal properties of the polymers were evaluated using TGA and DSC: the polymer obtained from monomer ( 1 ) exhibited lowest T_g and highest thermal stability and the polymer obtained from monomer ( 2 ) registered the highest T_g and lowest thermal stability. All the polymers displayed fluorescence maxima in the 425–525 nm range with relatively narrow peak widths indicating that they had pure and intense fluorescence. Also, the polymers formed charge transfer (CT) complexes with electron acceptor molecules such as 7,7,8,8‐tetracyano‐quino‐dimethane (TCNQ) and 1,1,2,2‐tetracyanoethane (TCNE) as evidenced by UV‐visible spectra. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3337–3351, 2009