气提吸附／热脱附／气相色谱－质谱法分析污水中的痕量有机物

采用气提吸附／热脱附／气相色谱－质谱法对齐鲁公司所处地区工业污水进行分析。方法采用Ｔｅｎａｘ－ＧＣ吸附剂对样品进行气提吸附，脱附时样品直接进入色谱仪汽化室，一次进样即可完成全组分分析，共检测出含四氯丙醚在内的４０种有机组分，测定了各组分的程序升温保留指数。气相色谱－质谱法测定出四氯丙醚三个异构体的结构。     

Utilizing a constant peak width transform for isothermal gas chromatography

A computational approach to partially address the general elution problem (GEP), and better visualize, isothermal gas chromatograms is reported. The theoretical computational approach is developed and applied experimentally. We report a high speed temporally increasing boxcar summation (TIBS) transform that, when applied to the raw isothermal GC data, converts the chromatographic data from the initial time domain (in which the peak widths in isothermal GC increase as a function of their retention factors, k), to a data point based domain in which all peaks have the same peak width in terms of number of points in the final data vector, which aides in preprocessing and data analysis, while minimizing data storage size. By applying the TIBS transform, the resulting GC chromatogram (initially collected isothermally), appears with an x-axis point scale as if it were instrumentally collected using a suitable temperature program. A high speed GC isothermal separation with a test mixture containing 10 compounds had a run time of ～25 s. The peak at a retention factor k ～0.7 had a peak width of ～55 ms, while the last eluting peak at k ～89 (i.e., retention time of ～22 s) had a peak width of ～2000 ms. Application of the TIBS transform increased the peak height of the last eluting peak 45-fold, and S/N ～20-fold. All peaks in the transformed test mixture chromatogram had the width of an unretained peak, in terms of number of data points. A simulated chromatogram at unit resolution, studied using the TIBS transform, provided additional insight into the benefits of the algorithm.     

Pressure‐Tunable Dual‐Column Ensembles for High‐Speed GC and GC/MS

A series‐coupled ensemble of two capillary GC columns of different selectivity with an adjustable pressure at the column junction point is used to obtain tunable selectivity for high‐speed GC and GC/TOFMS. An electronic pressure controller with a 0.1‐psi step size is used to obtain numerous computer‐selected unique selectivities. System configurations for conventional, atmospheric‐pressure outlet operation with flame ionization detection and for vacuum‐outlet operation with photoionization detection are described for GC‐only experiments. Polydimethylsiloxane is used as the non‐polar column and polyethylene glycol (atmospheric outlet) or triflouropropylpolysiloxane (vacuum outlet) is used as the polar column. For GC/TOFMS experiments, 5% phenyl polydimethylsiloxane was used as the non‐polar column, and polyethylene glycol was used as the polar column. The time‐of‐flight mass spectrometer can acquire up to 500 complete mass spectra per second. Since spectral continuity is achieved across the entire chromatographic peak profile, severely overlapping peaks can be spectrally deconvoluted for high‐speed characterization of completely unknown mixtures. For mixture components with significantly different fragmentation patterns, spectral deconvolution can be achieved for chromatographic peak separations of as little as 6.0 ms. This can result is very large peak capacity for time compressed (not completely resolved) chromatograms. The use of columns with tunable selectivity allows for precise peak‐position control, which can result in more efficient utilization of available peak capacity and thus further time compression of chromatograms. The limits of tunability and deconvolution are tested for near co‐elutions of different classes of hydrocarbon compounds as well as for more multi‐functional mixtures.     

The electrooxidation of organic acids at boron-doped diamond electrodes

The electrooxidation of citric acid, malic acid, alanine and cysteine at boron-doped diamond (BDD) electrodes and glassy carbon (GC) electrodes was investigated by use of cyclic voltammetry. Well-defined, irreversible peaks were obtained for the oxidation of citric acid and cysteine. Malic acid and alanine exhibit discernible responses. This preliminary study has shown that BDD has better sensitivity than GC for these compounds. Except for cysteine, none of the studied compounds exhibits a recognizable oxidation peak at GC electrodes at millimolar concentration levels.     

Universal and discriminative detection using a miniaturized pulsed discharge detector in comprehensive two-dimensional GC

A miniaturized pulsed discharge detector (Mini-PDD) has been successfully demonstrated for comprehensive 2-D GC (GC x GC) analysis of pyrolysis gasoline and the pyrolysis GC x GC analysis of a polyethylene copolymer. The detector cell volume of the Mini-PDD is reduced to 25% of the Valco plug-in PDD D-3. An n-C11 peak width at base is 96 ms for the Mini-PDD, about 23% larger than a peak width of 78 ms detected by a flame ionization detector (FID). The Mini-PDD has sufficient response time for most GC x GC applications. When Mini-PDD is operated in helium photoionization mode (Mini He-PDD), it is a universal detector for both inorganic and organic compounds. This is especially useful when detection of water is needed in GC x GC applications. When krypton is doped in the helium discharge gas (Mini Kr-PDD), it can suppress signals of compounds having higher ionization potentials and enhance relative signal intensities of aromatic compounds. The determination of aliphatic to aromatic hydrocarbon ratios is essential to the operation of petroleum crackers. Comparison of the signal from two modes of the Mini-PDD is a simple and fast way to verify the location of aromatics in comprehensive 2-D gas chromatograms.     

Identification of volatiles from pineapple (Ananas comosus L.) pulp by comprehensive two-dimensional gas chromatography and gas chromatography/mass spectrometry

Combining qualitative data from the chromatographic structure of 2-D gas chromatography with flame ionization detection (GC×GC-FID) and that from gas chromatography-mass spectrometry (GC/MS) should result in a more accurate assignment of the peak identities than the simple analysis by GC/MS, where coelution of analytes is unavoidable in highly complex samples (rendering spectra unsuitable for qualitative purposes) or for compounds in very low concentrations. Using data from GC×GC-FID combined with GC/MS can reveal coelutions that were not detected by mass spectra deconvolution software. In addition, some compounds can be identified according to the structure of the GC×GC-FID chromatogram. In this article, the volatile fractions of fresh and dehydrated pineapple pulp were evaluated. The extraction of the volatiles was performed by dynamic headspace extraction coupled to solid-phase microextraction (DHS-SPME), a technique appropriate for slurries or solid matrices. Extracted analytes were then analyzed by GC×GC-FID and GC/MS. The results obtained using both techniques were combined to improve compound identifications.     

Fast gas chromatography: packed column solvating gas chromatography versus open tubular column gas chromatography

Packed capillary column solvating gas chromatography (SGC) and open tubular column gas chromatography (GC) were compared with respect to their potentials for fast separations. A recently introduced "universal" peak capacity equation was used to compare the performance of these two methods. The effects of various factors on peak capacity were investigated. Results demonstrate that retention factor and column efficiency are the main factors affecting peak capacity for fast separations. Packed columns produce both high retention factors and high selectivities. While high efficiencies and high peak capacities can be demonstrated by both techniques, open tubular column GC can surpass packed capillary column SGC in both measurements, except for the case of the analysis of simple mixtures in short analysis times, where retention factor and selectivity become important. Practical aspects such as pressure drop and sample capacity are compared for SGC and open tubular column GC. It was found that packed column SGC demonstrates higher sample capacities, but requires much higher column inlet pressures than open tubular column GC. A variety of mobile phases can be used for packed column SGC, which can provide high solvating power for large and polar compounds.     

Isomeric composition of the ester fraction from epicuticular waxes of Festuca arundinacea Schreb

The ester portion of epicuticular waxes of tall fescue (Festuca arundinacea Schreb.) is composed of mixtures of homologous series of fatty acids esterfied with fatty alcohols. GC analyses of natural esters gave rise to the separation of several compounds of different chain length. To identify and quantify individual components in the mixture, GC/MS analyses were carried out, and the mass spectra of each peak were recorded and analyzed for characteristic ions. This approach permitted a comparison with data obtained from classical methods using GC analysis of acid and alcohol moieties obtained by hydrolysis.     

南方马尾松松针挥发油成分的气相色谱/质谱分析

采用水蒸了蒸馏方法从中国南方新鲜马尾松松针中提取出挥发油,利用气相色谱／质谱（ＧＣ／ＭＳ）联用技术对其化学成分进行了分析,共分离出９１个峰,各组分经数据库标准图谱核对,得到分子结构。其中３６种化合物的含量较高,占总离子流的８３．０５％,主要是单萜和倍半萜,以及少量萜烯的醇、酯类化合物。     

固相萃取-气相色谱-高分辨质谱法测定巢湖水中半挥发性有机化合物

描述了巢湖水中半挥发性有机化合物的提取、测定过程和初步结果。湖水中半挥发性有机化合物的提取采用XAD-2和XAD-4混合树脂富集，用气相色谱-高分辨质谱法测定了所萃取的有机化合物，并给出相应的分子式和结构式。春季湖水中检测到14种有机化合物。     

Hydrostatic countercurrent chromatography and ultra high pressure LC: Two fast complementary separation methods for the preparative isolation and the analysis of the fragrant massoia lactones

Using a one‐step preparative hydrostatic countercurrent chromatography method, the fragrant massoia lactones were purified from the crude massoia bark oil, in less than 3 h. The fractionation was performed with the biphasic solvent system c‐hexane–methanol–water (10:9:1, v/v/v), leading to target compounds with purity over 96%, as determined by GC‐MS and ultra high pressure LC‐MS analyses. Together with C‐10, C‐12 and C‐14 massoia lactones, two other aromatic compounds used in perfumes, benzyl benzoate and benzyl salicylate, were also obtained as pure compounds. In parallel, an easy and efficient ultra high pressure LC method was developed for the ultra‐fast analysis of massoia lactones, as an alternative to long GC‐MS methods.     

Evaluation of low-pressure gas chromatography linked to ion-trap tandem mass spectrometry for the fast trace analysis of multiclass pesticide residues

A rapid multiresidue method for the analysis of 72 pesticides has been developed using a single injection with low-pressure gas chromatography/tandem mass spectrometry (LP-GC/MS/MS). The LP-GC/MS/MS method used a short capillary column of 10 m x 0.53 mm i.d. x 0.25 microm film thickness coupled with a 0.6 m x 0.10 mm i.d. restriction at the inlet end. Optimal LP-GC conditions were determined which achieved the fastest separation in MS/MS detection mode. Also MS/MS conditions were optimized in order to increase sensitivity and selectivity. The analytical parameters of the LP-GC/MS/MS method were compared with those obtained by GC/MS/MS using a conventional capillary column (30 m x 0.25 mm i.d. x 0.25 microm film thickness). Better precision and sensitivity values were obtained with the LP-GC/MS/MS approach. The limits of detection (LOD) of the compounds ranged from 0.1 to 14.1 microg L(-1) for LP-GC/MS/MS, lower than those obtained for conventional GC/MS/MS that ranged from 0.1 to 17.5 microg L(-1). The peak widths obtained with the short column in LP-GC are similar to those obtained using conventional capillary GC columns, and the peaks can be successfully identified by MS/MS detection with the conventional scan speed of ion-trap instruments. In addition, the analysis time was significantly reduced with LP-GC/MS/MS (32 min) versus GC/MS/MS (72 min), allowing the number of samples analyzed per day in a routine laboratory to be doubled.     

A practicable strategy for enrichment and separation of four minor flavonoids including two isomers from barley seedlings by macroporous resin column chromatography,medium‐pressure LC,and high‐speed countercurrent chromatography

Separation of minor compounds especially with similar polarities and structures from complex samples is a challenging work. In the present study, an efficient method was successfully established by macroporous resin column chromatography, medium‐pressure liquid chromatography, and high‐speed countercurrent chromatography for separation of four minor flavonoids from barley seedlings. Macroporous resin column chromatography and medium‐pressure liquid chromatography were used for enrichment of these four flavonoids. High‐pressure liquid chromatography analysis showed the total content of these four flavonoids increased from 2.2% in the crude extract to 95.3% in the medium‐pressure liquid chromatography fraction. It was indicated that the combination of macroporous resin column chromatography and medium‐pressure liquid chromatography could be a practicable strategy for enrichment of minor compounds from complex sample. Then, high‐speed countercurrent chromatography was employed for separation of these four flavonoids using ethyl acetate/n‐butanol/water (0.1% glacial acetic acid) (4:1:5, v/v/v) as solvent system. As a result, four flavonoids including two isomers with purities higher than 98% were obtained. Interestingly, two flavonoids existing in one high‐pressure liquid chromatography peak were also successfully separated. All these indicated high‐speed countercurrent chromatography had great potential for separation of compounds with similar structures and polarities. This study provides a reference for efficient enrichment and separation of minor compounds from complex sample.     

Comprehensive two-dimensional gas chromatography/mass spectrometric analysis of pepper volatiles

The headspace compositions of 13 pepper and peppercorn samples of different species, colloquially also referred to as pepper, were analyzed, and more than 300 compounds were tentatively characterized by means of comprehensive two-dimensional gas chromatography in tandem with flame ionization detection, quadrupole mass spectrometric detection and time-of-flight mass spectrometric detection (GC x GC-FID, GC x GC/qMS and GC x GC/TOFMS, respectively). The analysis of volatile organic compounds (VOCs) was performed after solid-phase microextraction (SPME) using a 75-microm PDMS/DVB fibre. Fingerprint comparison between the three techniques permitted peaks to be assigned in the GC x GC-FID experiment based on the analogous MS analysis, taking into account retention shifts arising from method variations. When using GC x GC/TOFMS, about five times more peaks were identified than in GC x GC/qMS. Retention indices for all peaks were calculated in the bi-dimensional column set comprising of a 5% phenyl polysilphenylene-siloxane primary column and a polyethylene glycol second column. The spectra obtained by both mass detection techniques (qMS and TOFMS) give very similar results when spectral library searching was performed. The majority of the identified compounds eluted as pure components as a result of high-resolution GC x GC separations, which significantly reduces co-elution, and therefore increases the likelihood that pure spectra can be obtained. The differences between TOFMS and qMS (in fast scanning mode) spectra were generally small. Whilst spectral quality and relative ion ratios across a narrow peak (e.g. w(b) approximately 100-150 ms) do vary more for the fast peaks obtained in GC x GC/qMS operation, than with TOFMS, in general adequate spectral matching with the library can be achieved.     

白千层挥发油化学成分分析

用毛细管气相色谱、气相色谱－ 质谱－ 计算机分析技术, 对植物白千层枝叶挥发油化学成分进行了分析研究, 从这种植物挥发油中分离出８０ 个以上的组分, 确认了其中的３５ 种成分, 所鉴定的组分占挥发油色谱总峰面积的９０ ％ 以上。     

Temperature requirements for thermal modulation in comprehensive two-dimensional gas chromatography

Temperature requirements for trapping and release of compounds in a cryogenic gas loop-type GC x GC modulator were determined. Maximum trapping temperatures on the uncoated, deactivated modulator capillary were determined for compounds from C4 (bp -0.5 degrees C) to C40 (bp 522 degrees C). The liquid-nitrogen cooled gas flow rate was reduced from a high of 15.5 to 1.5 SLPM over the range to achieve the required trapping temperature. Excessive cold jet flow rates caused irreversible trapping and peak tailing for semi-volatile compounds above C26. Alternate cold jet coolants were investigated. An ice water-cooled jet was able to trap compounds with boiling points from C18 (bp 316 degrees C) to C40 and a room temperature air-cooled jet was able to trap compounds from C20 (bp 344 degrees C) to C40. The hot jet produced launch temperatures approximately 40 degrees C hotter than the elution temperature with heating time constants of 8 to 27 ms. Modulated compound peaks were symmetrical with half-height peak widths of 43 to 56 ms for compounds with little second column retention, and 70 to 75 ms for compounds with more second column retention. The liquid nitrogen-cooled loop modulator with gas flow programming was used to produce a GC x GC chromatogram for a crude oil that contained compounds from C7 to C47.     

香芸火绒草精油化学成分研究

用毛细管气相色谱／质谱、毛细管气相色谱／付里叶红外联用技术对青海产香芸火绒草精油化学成分进行分离。共鉴定出１１９个化俣物，占全部峰面积的９６．８％。     

Separation of three polar compounds from Rheum tanguticum by high‐speed countercurrent chromatography with an ethyl acetate/glacial acetic acid/water system

The separation of polar compounds by high‐speed countercurrent chromatography is still regarded as a challenge. In this study, an efficient strategy for the separation of three polar compounds from Rheum tanguticum has been successfully conducted by using high‐speed countercurrent chromatography. X‐5 macroporous resin chromatography was used for the fast enrichment of the target compounds. Then, the target fraction was directly introduced into high‐speed countercurrent chromatography for separation using ethyl acetate/glacial acetic acid/water (100:1:100, v/v/v) as the solvent system. Consequently, three polar compounds including gallic acid, catechin, and gallic acid 4‐O‐β‐d ‐(6′‐O‐galloyl) glucoside were obtained with purities higher than 98%. The results showed glacial acetic acid could be such an appropriate regulator for the ethyl acetate/water system. This study provides a reference for the separation of polar compounds from natural products by high‐speed countercurrent chromatography.     

Comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometric detection applied to the determination of pesticides in food extracts

The separation provided by conventional gas chromatography (1D-GC) can be significantly enhanced by using comprehensive two-dimensional GC (GC X GC) instead. Combination with mass spectrometric detection is desirable for unambiguous confirmation of target compounds and the provisional identification of unknowns. A GC X GC system using a cryogenic modulator was coupled to a time-of-flight mass spectrometric (TOF MS) detector. With the determination of pesticides in vegetable extracts as an example, it was demonstrated that GC X GC improves the separation dramatically. All 58 pesticides of interest could be identified using their full-scan mass spectra, which was not possible when using ID-GC-TOF MS. In addition, the high scan speed of the TOF MS allowed the deconvolution of compounds partly co-eluting in GC X GC.     

Analysis of Titan tholin pyrolysis products by comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry

The reddish brown haze that surrounds Titan, Saturn's largest moon, is thought to consist of tholin-like organic aerosols. Tholins are complex materials of largely unknown structure. The very high peak capacity and structured chromatograms obtained from comprehensive two-dimensional GC (GC x GC) are attractive attributes for the characterization of tholin pyrolysis products. In this report, GC x GC with time-of-flight MS detection and a flash pyrolysis inlet is used to characterize tholin pyrolysis products. Identified pyrolysis products include low-molecular-weight nitriles, alkyl substituted pyrroles, linear and branched hydrocarbons, alkyl-substituted benzenes and PAH compounds. The pyrolysis of standards found in tholin pyrolysate showed that little alteration occurred and thus these structures are likely present in the tholin material.