Adsorption and Mobility of Water and Benzene Molecules in Carbon and Polymer Adsorbents

The correlation between the adsorption and the mobility of adsorbed molecules was analyzed. The peculiarities of molecular mobility in microporous adsorbents with relatively rigid (active carbons) and non-rigid (polymer super-crosslinked and methacrylate sorbents) structure were studied using pulsed nuclear magnetic resonance (NMR) techniques. It was shown that the translational behavior of water and benzene in pores are connected with the specific adsorption mechanism. The NMR data allowed analyzing the changes of molecular state in the processes of adsorption. Diffusional properties of water molecules in the super-crosslinked polystyrenes and active carbons with relatively rigid framework are similar and differ from that in methacrylate polymer sorbents. Moreover, the results of NM relaxation measurements allowed analyzing the porous structure over the scale of pore sizes, while the scale of the self-diffusion measurements comprises the areas of different porosity. The NMR data agree well with the data of adsorption measurements and complement them. Dedication: This work is devoted to memory of the professor W. Schirmer.     

Noise and Drift Phenomena in Amperometric and Coulometric Detectors for HPLC and FIA

Abstract

Noise and drift phenomena in electrochemical detectors with solid electrodes are discussed. A relationship between the capacity of the working electrode and the noise of the detector is demonstrated in three different ways, using direct correlation of noise with capacity, time correlation functions and electrical simulation of the cell properties. Conclusions are drawn with respect to the prospects of various measures to improve the detection limit.     

Optically and redox-active ferroceneacetylene polymers and oligomers

The palladium-catalyzed Sonogashira reaction can be used to build optically active, oligomeric 1,2,3-substituted ferrocenes up to the tetramer, as well as polymers, by sequential coupling of optically active (ee > 98 %), planar chiral iodoferroceneacetylenes and ferroceneacetylenes. (SFC)-1-Iodoferrocene-2-carbaldehyde (1) was reduced to the alcohol and methylated to give the corresponding methyl ether, which was Sonogashira-coupled with HC(triple bond)CSiEt3, resulting in (RFc)-1-(C(triple bond)CSiEt3)-2-methoxymethylferrocene (4) (79%, three steps). Orthometalation with tBuLi followed by quenching with 1,2-diodoethane gave (RFc)-1-(C(triple bond)CSiEt3)-2-methoxymethyl-3-iodoferrocene (5). Deprotection of the acetylene with nBu4NF resulted in (RFc)-1-ethynyl-2-methoxymethyl-3-iodoferrocene (6), which was Sonogashira-coupled with itself to produce an optically active polymer. Deprotection of 4 with nBu4NF and Sonogashira coupling of the product with 5 resulted in the dinuclear ferrocene 9. Deprotection of 9 and coupling with 5, followed by deprotection of the resulting acetylene 11, gave the trinuclear ferrocene 12. Another such sequence involving 11 and 5 produced a tetranuclear ferrocene 13. To study the electronic communication in such oligomers in more detail, two symmetrical, closely interrelated, trinuclear ferrocenes 18 and 19 were synthesized. The redox potentials of all the ferrocenes and the ferroceneacetylene polymer were determined by cyclic and square-wave voltammetry. All the metallocenes were investigated by UV/Vis spectroscopy. A linear relationship was found between lambdamax and l/n (n=number of ferrocene units in the oligomer). The polymer displayed two redox waves in the cyclic voltammogram, at 0.65 and 0.795 V. The corresponding mixed-valence oligoferrocene cations were synthesized from four ferroceneacetylenes, and their metal-metal charge transfer bands were examined by UV/Vis-NIR. The resonance exchange integrals Had, calculated on the basis of spectral information from the metal - metal charge transfer (MMCT) bands, were between 290 and 552 cm-1.     

Kinetics and mechanisms of chlorine dioxide and chlorite oxidations of cysteine and glutathione

Chlorine dioxide oxidation of cysteine (CSH) is investigated under pseudo-first-order conditions (with excess CSH) in buffered aqueous solutions, p[H+] 2.7-9.5 at 25.0 degrees C. The rates of chlorine dioxide decay are first order in both ClO2 and CSH concentrations and increase rapidly as the pH increases. The proposed mechanism is an electron transfer from CS- to ClO2 (1.03 x 10(8) M(-1) s(-1)) with a subsequent rapid reaction of the CS* radical and a second ClO2 to form a cysteinyl-ClO2 adduct (CSOClO). This highly reactive adduct decays via two pathways. In acidic solutions, it hydrolyzes to give CSO(2)H (sulfinic acid) and HOCl, which in turn rapidly react to form CSO3H (cysteic acid) and Cl-. As the pH increases, the (CSOClO) adduct reacts with CS- by a second pathway to form cystine (CSSC) and chlorite ion (ClO2-). The reaction stoichiometry changes from 6 ClO2:5 CSH at low pH to 2 ClO2:10 CSH at high pH. The ClO2 oxidation of glutathione anion (GS-) is also rapid with a second-order rate constant of 1.40 x 10(8) M(-1) s(-1). The reaction of ClO2 with CSSC is 7 orders of magnitude slower than the corresponding reaction with cysteinyl anion (CS-) at pH 6.7. Chlorite ion reacts with CSH; however, at p[H+] 6.7, the observed rate of this reaction is slower than the ClO2/CSH reaction by 6 orders of magnitude. Chlorite ion oxidizes CSH while being reduced to HOCl, which in turn reacts rapidly with CSH to form Cl-. The reaction products are CSSC and CSO3H with a pH-dependent distribution similar to the ClO2/CSH system.     

Syneresis and crystallinity in plasticized rubbery networks and composites

We prepared polycaprolactone networks plasticized (60 wt%) with triacetin, with and without filler particles to model high-energy solid rocket propellants. Under strain and at lower temperatures these materials partially crystallize but also undesirably exude plasticizer (syneresis). We measured both properties isothermally (30°C) on the basis of molecular mobility: crystallinity with rapid-passage cw proton nuclear magnetic resonance (NMR), and syneresis with pulsed-gradient spin-echo NMR diffusion techniques, as a function of strain and time. In the gumstocks crystallinity and syneresis increase monotonically with strain and asymptotically with time. In a given specimen syneresis lags behind crystallinity but they approach the same value, suggesting that syneresis originates in expulsion of plasticizer from crystallizing regions. In the composites, crystallinity results resemble those in gum, but our diffusion data suggest that most syneresis is internal, with plasticizer accumulating in strain-debonded void regions near filler particles. © 1994 John Wiley & Sons, Inc.     

Bocdene and mocdene derivatives of catechols and catecholamines

[reaction in text] Catechols react chemoselectively, in the presence of either alcohols, 1,2-diols, or simple phenols, with tert-butyl propynoate and with methyl propynoate to give 2-Boc-ethylidene (Bocdene) and 2-Moc-ethylidene (Mocdene) acetals, respectively, in 96-100% yields within 30 min at room temperature, provided that 150 mol % of DMAP is added. Cleavage of these acetals with pyrrolidine readily takes place (at room temperature!) in 95-100% yields. By taking advantage of the features of Bocdene acetals, novel catecholamine-related phosphate mimetics have been prepared.     

Synthesis and structure of tetra- and triphenylantimony 2,4,6-trichlorophenoxides

The reaction of pentaphenylantimony with 2,4,6-trichlorophenol or bis(2,4,6-trichlorophenoxy)- triphenylantimony in toluene afforded (2,4,6-trichlorophenoxy)tetraphenylantimony. The reaction of triphenylantimony with tert-butyl hydroperoxide and 2,4,6-trichlorophenol led to the formation of bis(2,4,6-trichlorophenoxy) triphenylantimony; further reaction of the latter with triphenylantimony dichloride provided (2,4,6-trichlorophenoxy)triphenylantimony chloride. According to the XRD data, the antimony atoms in the prepared compounds had distorted trigonal-bipyramidal coordination with electronegative ligands in axial positions.     

Monomeric and polymeric copper and zinc tripyrrins

Neutral transition metal complexes of different alpha,omega-dimethyltripyrrins TrpyMX with M = Cu(II) and Zn(II) have been prepared with a variety of anionic halogeno and pseudohalogeno ligands X, and have been studied with respect to coordination modes and structural distortion. Only four- and five-coordinate species have been observed throughout the series. All four-coordinate species display unstrained, but distorted tetrahedral or strained and distorted square-planar coordination environments for zinc(II) and copper(II) species, respectively, thus following the expectations from simple ligand field arguments. Five-coordinate species do not form easily and were observed either in donor solvents or in the solid as 1D coordination polymers with distorted trigonal-bipyramidal coordination and different topologies.     

Synthesis and transformations of S- and N-substituted 2-mercaptobenzothiazoles

2-Mercaptobenzothiazole reacts with alkyl halides and hydrazine hydrate in the thiol form, and with formaldehyde in the thione form. The alkylation of 2-mercaptobenzothiazolidin-3-yl-methanol has been performed with sulfoalkyl halides and with propan-1,3-sultone. A number of new 2-hydrazinobenzothiazoles derivatives have been synthesized.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 1, pp. 40–43, January 1984.     

Spectrophotometric determination of titanium with tannin and thioglycollic acid and its application to titanium-treated steels and ferrous and non-ferrous alloys

A sensitive spectrophotometric method for the determination of titanium by formation of its complex with tannin and thioglycollic acid at pH 4 has been developed. The intense yellow colour is measured at 400 nm and the system obeys Beer's law over the range 0.2-5 ppm titanium in the solution measured. The method is applicable to titanium-treated steels, stainless steels, permanent magnet alloys and duralumin alloys. The interference of Co, Ni, Cr, Mn, V, Mo and W can be eliminated by prior separation of titanium by controlled addition of cupferron in the presence of thioglycollic acid (TGA). Copper can be quantitatively separated by precipitation with TGA and determined complexometrically with EDTA, with PAN as indicator. Niobium interferes even in traces.     

Preparation and photolysis of poly-p-ethylacrylophenone and poly-p-chloroacrylophenone and their copolymers with styrene and methyl methacrylate

Poly-p-ethylacrylophenone (PPEtAP) and poly-p-chloroacrylophenone (PPClAP) and their copolymers with styrene (PEtAP/S) and (PClAP/S) and with methyl methacrylate (PEtAP/MMA) and (PClAP/MMA) were prepared. Quantum yields of main-chain scissions at 366 nm at room temperature in benzene solution are of the same order as those of the unsubstituted polyacrylophenone and its copolymers. Substitution with chlorine and ethyl group in the para position compared to the unsubstituted polyacrylophenone and its copolymers leads to an increase of the lifetime for the n–π^* excited triplet state, as is evident from the measured quenching constants of photolysis. The low-temperature emission spectra of the copolymers are similar to the spectra of the model compounds in a polymer film. For the homopolymer, however, the character of the emission spectrum changes considerably.     

Synthesis and reaction of selenocarbamic acid sodium and potassium salts and organo-germanium, -tin,and -lead esters

Sodium 2 and potassium selenocarbamates 3 were found to be synthesized in moderate to good yields by the reaction of carbamoyl chlorides with sodium and potassium selenides. The salts 2 and 3 reacted with alkyl halides and organo-germanium, -tin, and -lead chlorides to give the corresponding esters 7–9 in good yields.     

Tricalixarenes and pentacalixarenes: synthesis and complexation studies

Tricalix[4]arene 4, tricalix[5]arene 14, and pentacalix[4]arene 10 have been synthesized from O-alkylcalixarene mono- and dialdehydes by a two-step conversion to the corresponding monoethynyl ketones or diethynyl ketones followed by aryne trimerization in refluxing DMF containing a dialkylamine. The tricalixarenes 4 and 14 were converted, in turn, to calixarenes 6 and 16, which carry OH groups on the lower rim and methylenes as the bridging moieties to the benzene ring. Complexation studies with the tricalix[5]arene 16 show that it forms (a) a 1:3 complex with N,N-dimethylethylenediamine in which each calixarene unit contains a molecule of the amine, (b) a 1:1 complex with tris(aminomethyl)amine in which each calixarene unit contains one of the three arms of the guest, and (c) a 1:1 complex with C60 in which the guest presumably resides in the cavity provided by the three calixarene units acting cooperatively.     

Kinetics and mechanisms of hydrolysis and aminolysis of thioxocephalosporins

The effect of replacing the beta-lactam carbonyl oxygen in cephalosporins by sulfur on their reactivity has been investigated. The second-order rate constant for alkaline hydrolysis of the sulfur analogue is 2-fold less than that for the natural cephalosporin. The thioxo derivative of cephalexin, with an amino group in the C7 side chain, undergoes beta-lactam ring opening with intramolecular aminolysis by a reaction similar to that for cephalexin itself. However, the rate of intramolecular aminolysis for the S-analogue is 3 orders of magnitude greater than that for cephalexin. Furthermore, unlike cephalexin, intramolecular aminolysis in the S-analogue occurs up to pH 14 with no competitive hydrolysis. The rate of intermolecular aminolysis of natural cephalosporins is dominated by a second-order dependence on amine concentration, whereas that for thioxocephalosporins shows only a first-order term in amine. The Bronsted beta(nuc) for the aminolysis of thioxo-cephalosporin is +0.39, indicative of rate-limiting formation of the tetrahedral intermediate with an early transition state with relatively little C-N bond formation.     

Solid-phase synthesis of dinucleoside and nucleoside-carbohydrate phosphodiesters and thiophosphodiesters

Unprotected nucleosides (ROH) were reacted with two polymers bound to N,N-diisopropylamino-1,3,2-oxathiaphospholane in the presence of 1H-terazole. Oxidation with tert-butyl hydroperoxide or sulfurization with Beaucage's reagent, followed by the 1,3,2-oxathiaphospholane ring opening with unprotected nucleosides or carbohydrates (R'OH) in the presence of DBU, afforded nucleoside-(5'-5')-nucleoside or nucleoside-carbohydrate phosphodiester and thiophosphodiester derivatives through the elimination of polymer-bound ethylene episulfide. This strategy offers the advantages of facile isolation of final products and monosubstitution of unprotected nucleosides and carbohydrates.     

钛硅分子筛TS-1的合成、表征及催化性能

钛硅分子筛TS-1自Taramasso等［1］首次报道合成以来,由于其优异的选择氧化催化 性能及其催化的反应具有对环境污染轻,反应条件温和等优点而备受关注. 钛硅分子筛的制 备及应用研究是分子筛催化领域中的热点之一. 在经典的合成体系中,四丙基氢氧化铵(TPAO H)常被用作模板剂［2］,这是钛硅分子筛价格较为昂贵的主要原因之一. 国内外学者 都致力于廉价合成体系的开发,Müller等［3］报道了以四丙基溴化铵(TPABr)作模板 剂合成钛硅分子筛. 对于钛源和硅源,人们往往都采用水解趋势较为缓和的钛酯和硅酯,以达 到钛源和硅源的匹配;在合成过程中,要预先将钛酯加入到乙酰丙酮或异丙醇溶剂中进行稀释 ,并对胶液进行蒸醇处理［2,3］. 这使得钛硅分子筛的合成过程更加复杂,并提高了 其合成费用. 本文以钛酸四丁酯(TBOT)和四氯化钛混合原料作钛源,成功地合成出对丙烯环 氧化具有优异催化性能的钛硅分子筛TS-1,避免了上述的复杂步骤,并降低了钛硅分子筛的成本.     

N-alkylation and N-acylation of polyaniline and its effect on solubility and electrical conductivity

Various alkylating and acylating agents, with different electrophilicity, were allowed to react with polyaniline “emeraldine base” (Pan-EB) or its anion. Replacing the N-hydrogens of polyaniline by various acyl or benzyl groups strongly affected the solubility and the electrical conductivity of the polymer. Neutral Pan-EB was reacted with benzoyl chloride, p-t-butylbenzoyl chloride or pivaloyl chloride in N,N′-dimethylpropylene urea (DMPU) solutions. While the benzoyl and pivaloyl derivatives showed very poor solubility in common organic solvents, the p-t-butylbenzoyl derivative was readily soluble in THF, chloroform, DMSO, etc. As expected, these acyl derivatives showed diminished electrical conductivity relative to that of the parent Pan-EB. Benzyl chlorides did not react with neutral Pan-EB. Attempts to prepare solutions of the nitrogen anion of Pan-EB by reaction with sodium hydride in DMSO or DMPU led invariably to crosslinked insoluble material. This was ascribed to Michael addition of the formed nitrogen anions to the quinonimine moieties. However forming the nitrogen anion in presence of p-t-butylbenzyl chloride trapped it to form N-benzylated Pan-EB. This was a soluble high molecular weight, electrically conductive (4.3 × 10⁻¹ S cm⁻¹ as the hydrochloride) N-alkyl Pan-EB. Reacting Pan-EB with excess of both sodium hydride and benzyl chlorides led to film-forming per-benzylated Pan-leucoemeraldine reduced form. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1673–1679, 1997     

The fate and behavior of glufosinate-enantiomers and their metabolites in open-field soil and weeds

In this study, a chiral method based on high performance liquid chromatography–Q-Exactive Orbitrap Mass Spectrometry was developed to determine glufosinate stereoisomers and three metabolites in weed. Fortified recoveries in weed and soil samples were from 78.6 to 94.3 %, with relative standard deviations of less than 9.8 % and fortified values ranging from 0.04 to 40 mg/kg for the glufosinate enantiomers and 0.08–8 mg/kg for three metabolites. When glufosinate was given at the peak of weed growth in three orchards, it was mostly distributed and degraded in the weeds, with little remaining in the soil. The two glufosinate enantiomers degraded rapidly in the weeds and soils, with half-lives ranging from 0.7 to 3.1 days. The degradation of glufosinate enantiomers in Guizhou and Hunan weeds was enantioselective, with l-glufosinate being preferentially degraded. In Hainan weed, the degradation rate of the two enantiomers was nearly the same. In open field soils, glufosinate enantiomers were almost non-enantioselective. 3-methylphosphinico-propionic acid (MPP) was the primary glufosinate metabolite in weeds and soils, accounting for up to 14 % of the parent. N-acetyl-glufosinate (NAG) was relatively low, with less than 1 % of the parent glufosinate metabolized into 2-methylphosphinico-acetic acid (MPA).     

A Novel and Optimized Method for Electro-focusing and Moving Neutralization Reaction Boundary Formed by HCl and NaOH

The theory of MCRB has been developed by C. X. Cao1-4, Deman-Rigole5,6 and Pospichal et al.7. The relations between the MCRB and IEF8,9 have also been revealed by C. X. Cao et al.10-13. The theory has been partially demonstrated by the experiments performed by the above workers5-7,14-16.But, the validity of the theory for MNRB has not been manifested, and efficient method has not been developed for the MNRB and electro-focusing that is based on the mechanism of MNRB10-12. The purp…     

Fabrication of polytetrafluoroethylene- and graphite-containing oxide layers on aluminum and titanium and their structure

Stable aqueous electrolyte emulsions with negatively charged micelles containing dispersed particles of polytetrafluoroethylene (PTFE) or graphite are obtained using siloxane-acrylate emulsion as an emulsifier. The oxide coatings formed in such electrolytes contain carbon, polytetrafluoroethylene, or graphite. The coatings with PTFE particles are similar to monolithic polytetrafluoroethylene with respect to its hydrophobic characteristics. According to X-ray photoelectron spectroscopy data, the surface of the formed coatings predominantly contains aliphatic carbon (C-C and C-H bonds) and some fraction of oxidized (or, in the case of PTFE-containing electrolytes, fluorinated) carbon.