工件加工时间是开工时间线性函数的单机排序问题

研究了具有线性恶化工件的单机排序问题,其中线性恶化工件指的是工件的加工时间是开工时间的线性增长函数.在一般情况下,对目标函数为极小化完工时间平方和与极小化总误工数问题分别给出了最优算法.此外,在分段情况下,对目标函数为极小化最大完工时间问题也给出了最优算法.     

具有线性减少加工时间的资源约束单机排序问题

讨论具有连续资源的单机排序问题.在这一模型中,工件的准备时间是所消耗资源的非负严格减少连续函数,工件的加工时间是开工时间的严格减少线性函数.考虑两类问题,第一类问题的目标函数是在满足最大完工时间限制条件下极小化资源消耗总量.第二类问题的目标函数是在满足资源消耗总量限制条件下极小化最大完工时间.对两类问题讨论了最优排序的某些特征.基于对问题的分析,分别给出了求解最优资源分配的方法.结果表明,加工时间为常数情况的结论对于加工时间是开工时间线性函数的情况仍然成立.     

加工时间可控和恶化的单机最大完工时间排序

本文研究加工时间可控并随开工时间简单线性增长的单机最大完工时间排序问题.该问题将加工时间可控排序和加工时间恶化排序两类研究连接到一起.通过比较技术证明了该问题存在满足以下性质的最优解:每个工件的加工时间或者完全压缩,或者完全不压缩;加工时间完全压缩的工件的顺序由一个工件参数和控制变量的函数的递增序给出,完全不压缩的工件在完全压缩的工件之后以任意序加工.通过将问题等价转换为0-1非线性整数规划问题,给出了单机排序问题的贪婪算法.     

工件加工时间增加的排序问题(1‖Cmax)

讨论了工件加工时间随工件开工时间线性增加的排序问题,考虑的目标函数是最大完工时间,证明了加工时间是简单线性增加情况下最大完工时间问题是多项式时间可解的,对于加工时间是一般线性增加情况,研究了最优排序的性质,同时证明了两种特殊情况下最大完工时间问题也是多项式时间可解的。     

带有退化效应和序列相关运输时间的排序问题

考虑带有退化效应和序列相关运输时间的单机排序问题. 工件的加工时间是其开工时间的简单线性增加函数. 当机器单个加工工件时, 极小化最大完工时间、(加权)总完工时间和总延迟问题被证明是多项式可解的, EDD序对于极小化最大延迟问题不是最优排序, 另外, 就交货期和退化率一致情形给出了一最优算法. 当机器可分批加工工件时, 分别就极小化最大完工时间和加权总完工时间问题提出了多项式时间最优算法.     

加工时间可控和简单线性增长的平行机排序

本文研究加工时间可控并随开工时间简单线性增长的平行机排序问题.证明了该问题为NP-难问题,该问题存在满足以下性质的最优排序:每个工件的加工时间要么完全压缩,要么完全不压缩;每台机器的工件排序由一个工件参数和控制变量的函数的递增序给出.通过将问题等价转换为0-1非线性整数规划问题,给出了平行机排序问题的贪婪算法.     

两类加工时间是一般函数的单机排序问题

考虑了两类有一般加工时间函数的排序问题. 工件的加工时间分别为基本加工时间与开工时间函数、位置函数的和. 对加工时间依赖开工时间的模型,证明了一定条件下极小化最大完工时间和极小化总完工时间是多项式可解的. 对加工时间依赖开工位置的模型,给出极小化最大完工时间和极小化总完工时间的最优序,同时证明了极小化加权总完工时间的一个最优排序性质并给出一个贪婪算法.     

基于重新排序的退化工件最小化总延误时间问题

考虑了错位限制下的含有退化工件的重新排序问题,即工件的实际加工时间看作是工件开工时间的线性函数．重新排序就是在原始工件已经按照某种规则使目标函数达到最优时有一新工件集到达,新工件的安排使得原始工件重新排序进而产生错位．研究了最大序列错位和总序列错位限制下的退化工件最小化总延误时间问题,其最优排序的结构性质是使得原始工件集和新工件集中的工件是按加工率αj非减的序列排列,基于此通过分阶段排序和动态规划方法给出了两个问题的多项式时间的最优算法．     

基于退化效应的两台机器流水作业可拒绝排序

考虑了工件具有退化效应的两台机器流水作业可拒绝排序问题,其中工件的加工时间是其开工时间的简单线性增加函数.每个工件或者被接收,依次在两台流水作业机器上被加工,或者被拒绝但需要支付一个确定的费用.考虑的目标是被接收工件的最大完工时间加上被拒绝工件的总拒绝费用之和.证明了问题是NP-难的,并提出了一个动态规划算法.最后对一种特殊情况设计了多项式时间最优算法.     

恶化率与工件无关的线性加工时间调度问题

讨论恶化率与工件无关的线性加工时间调度问题 .对于工件间具有平行链约束 ,目标函数为极小化最大完工时间的单机问题 ,分别就链不允许中断和链允许中断两种情况给出了最优算法 .对于工件间没有优先约束 ,目标函数为极小化完工时间和的平行机问题 ,证明了工件按基本加工时间不减排列可以得到最优调度 .     

Single-machine time-dependent scheduling problems with fixed rate-modifying activities and resumable jobs

In this paper, we deal with single machine scheduling problems subject to time dependent effects. The main point in our models is that we do not assume a constant processing rate during job processing time. Rather, processing rate changes according to a fixed schedule of activities, such as replacing a human operator by a less skilled operator. The contribution of this paper is threefold. First, we devise a time-dependent piecewise constant processing rate model and show how to compute processing time for a resumable job. Second, we prove that any time-dependent continuous piecewise linear processing time model can be generated by the proposed rate model. Finally, we propose polynomial-time algorithms for some single machine problems with job independent rate function. In these procedures the job-independent rate effect does not imply any restriction on the number of breakpoints for the corresponding continuous piecewise linear processing time model. This is a clear element of novelty with respect to the polynomial-time algorithms proposed in previous contributions for time-dependent scheduling problems.     

Scheduling with time dependent processing times: Review and extensions

In classical scheduling theory job processing times are constant. However, there are many situations where processing time of a job depends on the starting time of the job in the queue. This paper reviews the rapidly growing literature on single machine scheduling models with time dependent processing times. Attention is focused on linear, piecewise linear and non-linear processing time functions for jobs. We survey known results and introduce new solvable cases. Finally, we identify the areas and give directions where further research is needed.     

Single Machine Scheduling with Learning Effect Considerations

In this paper we study a single machine scheduling problem in which the job processing times will decrease as a result of learning. A volume-dependent piecewise linear processing time function is used to model the learning effects. The objective is to minimize the maximum lateness. We first show that the problem is NP-hard in the strong sense and then identify two special cases which are polynomially solvable. We also propose two heuristics and analyse their worst-case performance.     

Single Machine Batch Scheduling Problem with Resource Dependent Setup and Processing Time in the Presence of Fuzzy Due Date

We consider a batch scheduling problem on a single machine which processes jobs with resource dependent setup and processing time in the presence of fuzzy due-dates given as follows:1. There are n independent non-preemptive and simultaneously available jobs processed on a single machine in batches. Each job j has a processing time and a due-date.2. All jobs in a batch are completed together upon the completion of the last job in the batch. The batch processing time is equal to the sum of the processing times of its jobs. A common machine setup time is required before the processing of each batch.3. Both the job processing times and the setup time can be compressed through allocation of a continuously divisible resource. Each job uses the same amount of the resource. Each setup also uses the same amount of the resource.4. The due-date of each job is flexible. That is, a membership function describing non-decreasing satisfaction degree about completion time of each job is defined.5. Under above setting, we find an optimal batch sequence and resource values such that the total weighted resource consumption is minimized subject to meeting the job due-dates, and minimal satisfaction degree about each due-date of each job is maximized. But usually we cannot optimize two objectives at a time. So we seek non-dominated pairs i.e. the batch sequence and resource value, after defining dominance between solutions.A polynomial algorithm is constructed based on linear programming formulations of the corresponding problems.     

Single-machine due window assignment and scheduling with a common flow allowance and controllable job processing time

In this paper, we consider single-machine due window assignment and scheduling with a common flow allowance and controllable job processing times, subject to unlimited or limited resource availability. Due window assignment with a common flow allowance means that each job has a job-dependent due window, the starting time and completion time of which are equal to its actual processing time plus the job-independent parameters q₁ and q₂, respectively, which are common to all the jobs. The processing time of each job is either a linear or a convex function of the amount of a common continuously divisible resource allocated to the job. We study five versions of the problem that differ in terms of the objective function and processing time function being used. We provide structural properties of the optimal schedules and polynomial-time solution algorithms for the considered problems.     

带准备时间的单机指数时间学习效应排序问题

研究带有准备时间的单机学习效应模型,其中工件加工时间具有指数时间学习效应,即工件的实际加工时间是已经排好的工件加工时间的指数函数。学习效应模型考虑工件的实际加工时间同时依赖于工件本身的加工时间和已加工工件的累计加工时间,目标函数为最小化总完工时间。这个问题是NP-难的,提出了一个数学规划模型来求解该问题的最优解。通过分析几个优势性质和下界,提出分支定界算法来求解此问题,并设计启发式算法改进分支定界算法的上界值。通过仿真实验验证了分支定界算法在求解质量和时间方面的有效性。     

Deteriorating jobs scheduling on a single machine with release dates,rejection and a fixed non-availability interval

This paper studies single machine scheduling with a fixed non-availability interval. The processing time of a job is a linear increasing function of its starting time, and each job has a release date. A job is either rejected by paying a penalty cost or accepted and processed on the machine. The objective is to minimize the makespan of the accepted jobs and the total rejection penalties of the rejected jobs. We present a fully polynomial-time approximation scheme for the problem. We also show that the special case without non-availability interval can be solved using the same method with a lower order.