Surface response methodology for the study of supported membrane formation

We report on the investigations of the formation of the tethered lipid bilayer by vesicle deposition on amine-functionalized surfaces. The tethered bilayer was created by the deposition of egg-PC vesicles containing 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-poly-(ethyleneglycol)-N-hydroxysuccinimide as anchoring molecules on an amine-coated surface. This approach is an easy route for the formation of a biomimetic-supported membrane. A Doelhert experimental design was applied to determine the conditions leading to the formation of a continuous and defect-free tethered bilayer on different surfaces (gold and glass). Doehlert designs allow modeling of the experimental responses by second-order polynomial equations as a function of experimental factors. Four factors expected to influence bilayer formation were studied: the lipid concentration in the vesicle suspension, the mass percentage of anchoring molecules in the vesicles, the contact time between the vesicles and the surface, and the resting time of the membrane after buffer rinse. The optimization of the membrane preparation parameters was achieved by monitoring lipid assembly formation using surface plasmon resonance spectroscopy on gold and by fluorescence recovery after photobleaching on glass. Three characteristic responses were systematically measured: the bilayer thickness, the lipid diffusion coefficient, and the lipid mobile fraction. The simultaneous inspection of the three characteristics revealed that a restricted experimental domain leads to properties that are in accordance with a bilayer presence. The factors of this domain are a lipid concentration from 0.1 to 1 mg/mL, 4-8% of anchoring molecules in the vesicles, 1-4 h of contact time between vesicles and surface, and 21-24 h of resting time after buffer rinse. Under these conditions, a membrane having a lipid mass per surface between 545 +/- 5 and 590 +/- 10 ng/cm2, a diffusion coefficient of between 2.5 +/- 0.3 x 10(-8) and 3.60 +/- 0.5 x 10(-8) cm2/s, and a mobile fraction between 94 +/- 2 and 99 +/- 1% was formed. These findings were confirmed by atomic force microscopy observations, which showed the presence of a continuous and homogeneous bilayer in the determined experimental domain. This formation procedure presents many advantages; it provides an easily obtainable biomimetic membrane model for proteins studies and offers a versatile tethered bilayer because it can be adapted easily to various types of supports.     

Direct electrochemical interaction between a modified gold electrode and a bacterial membrane extract

A novel electrochemical approach is described for redox-active membrane proteins. A total membrane extract (in the form of vesicles) of Bacillus subtilis is tethered onto gold surfaces modified with cholesterol based thiols. The membrane vesicles remain intact on the surface and do not rupture or fuse to form a planar bilayer. Oxidation/reduction signals are obtained of the natural co-enzyme, menaquinone-7, located in the membrane. The membrane protein, succinate menaquinone oxidoreductase (SQR), remains in the vesicles and is able to reduce fumarate using menaquinone as mediator. The catalysis of the reverse reaction (oxidation of succinate), which is the natural catalytic function of SQR, is almost absent with menaquinone. However, adding the co-enzyme ubiquinone, which has a reduction potential that is about 0.2 V higher, restores the succinate oxidation activity.     

Soft lithographic patterning of supported lipid bilayers onto a surface and inside microfluidic channels

We present simple soft lithographic methods for patterning supported lipid bilayer (SLB) membranes onto a surface and inside microfluidic channels. Micropatterns of polyethylene glycol (PEG)-based polymers were fabricated on glass substrates by microcontact printing or capillary moulding. The patterned PEG surfaces have shown 97 +/- 0.5% reduction in lipid adsorption onto two dimensional surfaces and 95 +/- 1.2% reduction inside microfluidic channels in comparison to glass control. Atomic force microscopy measurements indicated that the deposition of lipid vesicles led to the formation of SLB membranes by vesicle fusion due to hydrophilic interactions with the exposed substrate. Furthermore, the functionality of the patterned SLBs was tested by measuring the binding interactions between biotin (ligand)-labeled lipid bilayer and streptavidin (receptor). SLB arrays were fabricated with spatial resolution down to approximately 500 nm on flat substrate and approximately 1 microm inside microfluidic channels, respectively.     

Diffusive dynamics of vesicles tethered to a fluid supported bilayer by single-particle tracking

We recently introduced a method to tether intact phospholipid vesicles onto a fluid supported lipid bilayer using DNA hybridization (Yoshina-Ishii, C.; Miller, G. P.; Kraft, M. L; Kool, E. T.; Boxer, S. G. J. Am. Chem. Soc. 2005, 127, 1356-1357). Once tethered, the vesicles can diffuse in two dimensions parallel to the supported membrane surface. The average diffusion coefficient, D, is typically 0.2 microm(2)/s; this is 3-5 times smaller than for individual lipid or DNA-lipid conjugate diffusion in supported bilayers. In this article, we investigate the origin of this difference in the diffusive dynamics of tethered vesicles by single-particle tracking under collision-free conditions. D is insensitive to tethered vesicle size from 30 to 200 nm, as well as a 3-fold change in the viscosity of the bulk medium. The addition of macromolecules such as poly(ethylene glycol) reversibly stops the motion of tethered vesicles without causing the exchange of lipids between the tethered vesicle and supported bilayer. This is explained as a depletion effect at the interface between tethered vesicles and the supported bilayer. Ca ions lead to transient vesicle-vesicle interactions when tethered vesicles contain negatively charged lipids, and vesicle diffusion is greatly reduced upon Ca ion addition when negatively charged lipids are present both in the supported bilayer and tethered vesicles. Both effects are interesting in their own right, and they also suggest that tethered vesicle-supported bilayer interactions are possible; this may be the origin of the reduction in D for tethered vesicles. In addition, the effects of surface defects that reversibly trap diffusing vesicles are modeled by Monte Carlo simulations. This shows that a significant reduction in D can be observed while maintaining normal diffusion behavior on the time scale of our experiments.     

A novel crossed microfluidic device for the precise positioning of proteins and vesicles

Herein we present a novel way to create arrays of different proteins or lipid vesicles using a crossed microfluidic device. The concept relies on the combination of I) a designated two-step surface chemistry, which allows activation for subsequent binding events, and II) crossing microfluidic channels for the local functionalization by separated laminar streams. Besides its simplicity and cost efficiency, this concept has the advantage that it keeps the proteins in a hydrated environment throughout the experiment. We have demonstrated the feasibility of such a device to create a chessboard pattern of different fluorescently labeled lipid vesicles, which offers the possibility to contain biomolecules, drugs or membrane proteins.     

Controlling two-dimensional tethered vesicle motion using an electric field: interplay of electrophoresis and electro-osmosis

We recently introduced methods to tether phospholipid vesicles or proteoliposomes onto a fluid-supported lipid bilayer using DNA hybridization (Yoshina-Ishii, C.; Miller, G. P.; Kraft, M. L.; Kool, E. T.; Boxer, S. G. J. Am. Chem. Soc. 2005, 127, 1356-1357). These intact tethered vesicles diffuse in two dimensions parallel to the supporting membrane surface. In this article, we report the dynamic response of individual tethered vesicles to an electric field applied parallel to the bilayer surface. Vesicles respond to the field by moving in the direction of electro-osmotic flow, and this can be used to reversibly concentrate tethered vesicles against a barrier. By adding increasing amounts of negatively charged phosphatidylserine to the supporting bilayer to increase electro-osmosis, the electrophoretic mobility of the tethered vesicles can be increased. The electro-osmotic contribution can be modeled well by a sphere connected to a cylindrical anchor in a viscous membrane with charged headgroups. The electrophoretic force on the negatively charged tethered vesicles opposes the electro-osmotic force. By increasing the amount of negative charge on the tethered vesicle, drift in the direction of electro-osmotic flow can be slowed; at high negative charge on the tethered vesicle, motion can be forced in the direction of electrophoresis. The balance between these forces can be visualized on a patterned supporting bilayer containing negatively charged lipids that reorganize in an externally applied electric field to create a gradient of charge within a corralled region. The charge gradient at the surface creates a gradient of electro-osmotic flow, and vesicles carrying similar amounts of negative charge can be focused to a region perpendicular to the applied field where electrophoresis is balanced by electro-osmosis, away from the corral boundary. Electric fields are effective tools to direct tethered vesicles and concentrate them and to measure the tethered vesicle's electrostatic properties.     

A facile approach for assembling lipid bilayer membranes on template-stripped gold

Lipid vesicles are designed with functional chemical groups to promote vesicle fusion on template-stripped gold (TS Au) surfaces that does not spontaneously occur on unfunctionalized Au surfaces. Three types of vesicles were exposed to TS Au surfaces: (1) vesicles composed of only 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) lipids; (2) vesicles composed of lipid mixtures of 2.5 mol % of 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-poly(ethylene glycol)-2000-N-[3-(2-pyridyldithio)propionate] (DSPE-PEG-PDP) and 97.5 mol % of POPC; and (3) vesicles composed of 2.5 mol % of 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(poly(ethylene glycol))-2000] (DSPE-PEG) and 97.5 mol % POPC. Atomic force microscopy (AFM) topography and force spectroscopy measurements acquired in a fluid environment confirmed tethered lipid bilayer membrane (tLBM) formation only for vesicles composed of 2.5 mol % DSPE-PEG-PDP/97.5 mol % POPC, thus indicating that the sulfur-containing PDP group is necessary to achieve tLBM formation on TS Au via Au-thiolate bonds. Analysis of force-distance curves for 2.5 mol % DSPE-PEG-PDP/97.5 mol % POPC tLBMs on TS Au yielded a breakthrough distance of 4.8 ± 0.4 nm, which is about 1.7 nm thicker than that of POPC lipid bilayer membrane formed on mica. Thus, the PEG group serves as a spacer layer between the tLBM and the TS Au surface. Fluorescence microscopy results indicate that these tLBMs also have greater mechanical stability than solid-supported lipid bilayer membranes made from the same vesicles on mica. The described process for assembling stable tLBMs on Au surfaces is compatible with microdispensing used in array fabrication.     

Fabrication of highly insulating tethered bilayer lipid membrane using yeast cell membrane fractions for measuring ion channel activity

A tethered bilayer lipid membrane (tBLM) was fabricated on a gold electrode using 1,2-dipalmitoyl-sn-glycero-phosphothioethanol as a tethering lipid and the membrane fractions of Saccharomyces pombe yeast cells to deposit the upper leaflet. The membrane fractions were characterized using transmission electron microscopy and dynamic light scattering and found to be similar in size to small unilamellar vesicles of synthetic lipids. The dynamics of membrane-fraction deposition and rupture on the tethering-lipid layer were measured using quartz crystal microgravimetry. The electrochemical properties of the resulting tBLM were characterized using electrical impedance spectroscopy and cyclic voltammetry. The tBLM's electrical resistance was greater than 1 MOmegacm(2), suggesting a defect-free membrane. The suitability of tBLM produced using membrane fractions for measuring ion-channel activities was shown by a decrease in membrane resistance from 1.6 to 0.43 MOmegacm(2) following addition of gramicidin. The use of membrane fractions to form high-quality tBLM on gold electrodes suggests a new approach to characterize membrane proteins, in which the upper leaflet of the tBLM is deposited, and overexpressed membrane proteins are incorporated, in a single step. This approach would be especially useful for proteins whose activity is lost or altered during extraction, purification, and reconstitution, or whose activities are strongly influenced by the lipid composition of the bilayer.     

Quantitative analysis of tethered vesicle assemblies by quartz crystal microbalance with dissipation monitoring: Binding dynamics and bound water content

To implement the molecular recognition properties of membrane proteins for applications including biosensors and diagnostic arrays, the construction of a biomimetic platform capable of maintaining protein structure and function is required. In this paper, we describe a tethered phospholipid vesicle assembly that overcomes the major limitations of planar supported lipid bilayers and alternative biomimetic membrane platforms and characterize it using quartz crystal microbalance with dissipation monitoring (QCM-D) and fluorescence microscopy. We provide evidence of a one-step mechanism for bilayer formation and monitor the subsequent adsorption and binding of streptavidin, vesicles, and streptavidin-coated microspheres. For all three species, we identify a critical surface density above which a significant amount of coupled interstitial water contributes to the response of the quartz resonator in a phenomenon similar to dynamic coupling due to surface roughness. A Sauerbrey-type analysis is sufficient to accurately interpret the QCM-D results for streptavidin binding if water is treated as an additional inertial mass, but viscoelastic models must be invoked for vesicle and microsphere binding. Additionally, we present evidence of vesicle flattening, possibly enhanced by a biotin-mediated membrane-membrane interaction.     

Templated assembly of biomembranes on silica microspheres using bacteriorhodopsin conjugates as structural anchors

Membrane proteins are some of the most sophisticated molecules found in nature. These molecules have extraordinary recognition properties; hence, they represent a vast source of specialized materials with potential uses in sensing and screening applications. However, the strict requirement of the native lipid environment to preserve their structure and functionality presents an impediment in building biofunctional materials from these molecules. In general, the purification protocols remove the native lipid support structures found in the cellular environment that stabilize the membrane proteins. Furthermore, the membrane protein structure is often highly complex, typified by large, multisubunit complexes that not only span the lipid bilayer but also contain large (>2 nm) cytoplasmic and extracellular domains that protrude from the membrane. The present study is focused on using a biomimetic approach to build a stable, fluid microenvironment to be used to incorporate larger membrane proteins of interest into a tether-supported lipid bilayer membrane adequately spaced above a substrate passivated to liposome fusion and nonspecific adsorption. Our aim is to reintroduce the supporting structures of the native cell membrane using self-assembled supramolecular complexes constructed on microspheres in an artificial cytoskeleton motif. Central to our architecture is to utilize bacteriorhodopsin (bR), a transmembrane protein, as a biomembrane anchoring molecule to be tethered to surfaces of interest as a sparse structural element in the design. Compared to a typical lipid tether, which inserts into one leaflet of the lipid bilayer, bR anchoring provides an over 8-fold greater hydrophobic surface area in contact with the bilayer. In the work presented here, the silica microsphere surface was biofunctionalized with streptavidin to make it a suitable supporting interface. This was achieved by self-assembly of (p-aminophenyl)trimethoxysilane on the silica surface followed by subsequent conjugation of biotin-PEG3400 (PEG = poly(ethylene glycol) and PEG2000 for further passivation and the binding of streptavidin. We have conjugated bR with biotin-PEG3400 through amine-based coupling to use it as a tether. The biotin-PEG-bR conjugate was further labeled with Texas Red to facilitate localization via fluorescence imaging. Confocal microscopy was utilized to analyze the microsphere surface at different stages of surface modification by employing fluorescent staining techniques. Sparely tethered supported lipid bilayer membranes were constructed successfully on streptavidin-functionalized silica particles (5 mum) using a detergent-based method in which tethered bR nucleates self-assembly of the bilayer membrane. The fluidity of the supported membranes was analyzed using fluorescence recovery after photobleaching in confocal imaging detection mode. The phospholipid diffusion coefficients obtained from these studies indicated that nativelike fluidity was achieved in the tether-supported membranes, thus providing a prospective microenvironment for insertion of membrane proteins of interest.     

Electro-optical BLM chips enabling dynamic imaging of ordered lipid domains

Studies of lipid rafts, ordered microdomains of sphingolipids and cholesterol within cell membranes, are essential in probing the relationships between membrane organization and cellular function. While in vitro studies of lipid phase separation are commonly performed using spherical vesicles as model membranes, the utility of these models is limited by a number of factors. Here we present a microfluidic device that supports simultaneous electrical measurements and confocal imaging of on-chip bilayer lipid membranes (BLMs), enabling real-time multi-domain imaging of membrane organization. The chips further support closed microfluidic access to both sides of the membrane, allowing the membrane boundary conditions to be rapidly changed and providing a mechanism for dynamically adjusting membrane curvature through application of a transmembrane pressure gradient. Here we demonstrate the platform through the study of dynamic generation and dissolution of ordered lipid domains as membrane components are transported to and from the supporting annulus containing solvated lipids and cholesterol.     

A novel method to fabricate patterned bilayer lipid membranes

We introduce a new method for forming tethered bilayer lipid membranes on surfaces patterned using a photocleavable self-assembled monolayer (SAM). A SAM terminated with a hydrophobic fluorocarbon residue was bound to a gold surface through a link containing a photocleavable ortho-nitrobenzyl moiety. Hydrophilic regions were produced by irradiation with soft UV (365 nm) through a photomask. The patterned surface was characterized by scanning electron microscopy and electrochemical impedance spectroscopy. Tethered bilayer lipid membranes with well-defined bilayer and monolayer regions were then formed by exposure to egg PC vesicles. The membranes had resistance and capacitance values of 0.52 MOmega.cm2 and 0.83 microF.cm-2, respectively.     

Phospholipid morphologies on photochemically patterned silane monolayers

We have studied the spreading of phospholipid vesicles on photochemically patterned n-octadecylsiloxane monolayers using epifluorescence and imaging ellipsometry measurements. Self-assembled monolayers of n-octadecylsiloxanes were patterned using short-wavelength ultraviolet radiation and a photomask to produce periodic arrays of patterned hydrophilic domains separated from hydrophobic surroundings. Exposing these patterned surfaces to a solution of small unilamellar vesicles of phospholipids and their mixtures resulted in a complex lipid layer morphology epitaxially reflecting the underlying pattern of hydrophilicity. The hydrophilic square regions of the photopatterned OTS monolayer reflected lipid bilayer formation, and the hydrophobic OTS residues supported lipid monolayers. We further observed the existence of a boundary region composed of a nonfluid lipid phase and a lipid-free moat at the interface between the lipid monolayer and bilayer morphologies spontaneously corralling the fluid bilayers. The outer-edge of the boundary region was found to be accessible for subsequent adsorption by proteins (e.g., streptavidin and BSA), but the inner-edge closer to the bilayer remained resistant to adsorption by protein or vesicles. Mechanistic implications of our results in terms of the effects of substrate topochemical character are discussed. Furthermore, our results provide a basis for the construction of complex biomembrane models, which exhibit fluidity barriers and differentiate membrane properties based on correspondence between lipid leaflets. We also envisage the use of this construct where two-dimensionally fluid, low-defect lipid layers serve as sacrificial resists for the deposition of protein and other material patterns.     

Microfluidic patterning of nanodisc lipid bilayers and multiplexed analysis of protein interaction

We report a microfluidic method for precisely patterning lipid bilayers and a multiplexed assay to examine the interaction between the lipids and protein analytes. The lipids were packaged into nanoscale lipid bilayer particles known as Nanodiscs and delivered to surfaces using microfluidic channels. Two types of lipids were used in this study: biontinylated lipids and phosphoserine lipids. The deposition of biotinylated lipids on a glass surface was confirmed by attaching streptavidin coated quantum dots to the lipids, followed by fluorescent imaging. Using this multiplexed grid assay, we examined binding of annexin to phosphoserine lipids, and compared these results to similar analysis performed by surface plasmon resonance.     

General method for modification of liposomes for encoded assembly on supported bilayers

An amphiphilic oligonucleotide species ((C18)2-DNA) is presented as a generally useful reagent to display encoded tether sequences on the surface of phospholipid assemblies. (C18)2-DNA inserts into preformed vesicles and proteoliposomes of arbitrary composition, content, and origin using a simple and gentle procedure and is a significant improvement over the previously described method particularly since it allows postmodification of any phospholipid assembly without the need for special lipids carrying reactive headgroups. DNA-modified vesicles can then be tethered, via DNA hybridization, onto a supported phospholipid bilayer displaying the complementary sequence. The encoding capability of the tether can be exploited to form an array of tethered vesicles spatially defined by the DNA sequence displayed on the surface and demonstrates that (C18)2-DNA is stably associated with a membrane to allow sorting. Vesicles tethered in this way show two-dimensional mobility, reflecting the fluidity of the supporting bilayer, and promises to be a useful system with which to study vesicle-vesicle interactions.     

Elucidating driving forces for liposome rupture: external perturbations and chemical affinity

Atomic force microscopy (AFM) studies under aqueous buffer probed the role of chemical affinity between liposomes, consisting of large unilamellar vesicles, and substrate surfaces in driving vesicle rupture and tethered lipid bilayer membrane (tLBM) formation on Au surfaces. 1,2-Distearoyl-sn-glycero-3-phosphoethanolamine-N-poly(ethylene glycol)-2000-N-[3-(2-pyridyldithio) propionate] (DSPE-PEG-PDP) was added to 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) vesicles to promote interactions via Au-thiolate bond formation. Forces induced by an AFM tip leading to vesicle rupture on Au were quantified as a function of DSPE-PEG-PDP composition with and without osmotic pressure. The critical forces needed to initiate rupture of vesicles with 2.5, 5, and 10 mol % DSPE-PEG-PDP are approximately 1.1, 0.8, and 0.5 nN, respectively. The critical force needed for tLBM formation decreases from 1.1 nN (without osmotic pressure) to 0.6 nN (with an osmotic pressure due to 5 mM of CaCl(2)) for vesicles having 2.5 mol % DSPE-PEG-PDP. Forces as high as 5 nN did not lead to LBM formation from pure POPC vesicles on Au. DSPE-PEG-PDP appears to be important to anchor and deform vesicles on Au surfaces. This study demonstrates how functional lipids can be used to tune vesicle-surface interactions and elucidates the role of vesicle-substrate interactions in vesicle rupture.     

Forming Lipid Bilayer Membrane Arrays on Micropatterned Polyelectrolyte Film Surfaces

A novel method of forming lipid bilayer membrane arrays on micropatterned polyelectrolyte film surfaces is introduced. Polyelectrolyte films were fabricated by the layer‐by‐layer technique on a silicon oxide surface modified with a 3‐aminopropyltriethoxysilane (APTES) monolayer. The surface pK_a value of the APTES monolayer was determined by cyclic voltammetry to be approximately 5.61, on the basis of which a pH value of 2.0 was chosen for layer‐by‐layer assembly. Micropatterned polyelectrolyte films were obtained by deep‐UV (254 nm) photolysis though a mask. Absorbed fluorescent latex beads were used to visualize the patterned surfaces. Lipid bilayer arrays were fabricated on the micropatterned surfaces by immersing the patterned substrates into a solution containing egg phosphatidylcholine vesicles. Fluorescence recovery after photobleaching studies yielded a lateral diffusion coefficient for probe molecules of 1.31±0.17 μm² s^?1 in the bilayer region, and migration of the lipid NBD PE in bilayer lipid membrane arrays was observed in an electric field.     

Quantitative imaging of protein adsorption on patterned organic thin-film arrays using secondary electron emission

Secondary electron emission is developed as a means to quantify and image protein binding to Au surfaces modified with patterned organic thin-film arrays. Alkane thiols were patterned via microcontact printing on gold, and their effects on the secondary electron (SE) yield of the surface, systematically quantified. We show that a self-assembled monolayer (SAM) of hexadecane thiol significantly increases the SE yield over the native gold surface, a yield that increases as a function of alkane chain length (C8-C16). This effect is linearly correlated with the surface potentials and wetting properties of these SAMs. Surface layers comprised of poly(ethylene glycol) (PEG) grafted polyacrylamide polymers behave differently, affecting the SE yield by attenuation according to the polymer thickness. These results demonstrate the relative contributions of factors related to the adsorbate molecular structures that serve to strongly mediate the SE yield, providing a foundation for exploiting them as a quantitative electron imaging probe. The latter capability is demonstrated using a model microfluidic assay in which a series of proteins was spatially addressed to a SAM-based pixel array. The gray scale contrasts seen with protein adsorption are directly correlated with both protein molecular weight and mass coverage. These methods are used in two model protein assay experiments: (1) the measurement of the concentration dependent adsorption isotherm for a model protein (fibrinogen); and (2) the selective recognition of a biotinylated protein layer by avidin. These results demonstrate a unique approach to imaging protein binding processes on surfaces with both high analytical and spatial sensitivity.     

Tethered bilayer lipid membranes studied by simultaneous attenuated total reflectance infrared spectroscopy and electrochemical impedance spectroscopy

The formation of tethered lipid bilayer membranes (tBLMs) from unilamelar vesicles of egg yolk phosphatidylcholine (EggPC) on mixed self-assembled monolayers (SAMs) from varying ratios of 6-mercaptohexanol and EO(3)Cholesteryl on gold has been monitored by simultaneous attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy and electrochemical impedance spectroscopy (EIS). The influence of the lipid orientation (and hence the anisotropy) of lipids on a gold film on the dichroic ratio was studied by simulations of spectra with a matrix method for anisotropic layers. It is shown that for certain tilt angles of the dielectric tensor of the adsorbed anisotropic layer dispersive and negative absorption bands are possible. The experimental data indicate that the structure of the assemblies obtained varies with varying SAM composition. On SAMs with a high content of EO(3)Cholesteryl, tBLMs with reduced fluidity are formed. For SAMs with a high content of 6-mercaptohexanol, the results are consistent with the adsorption of flattened vesicles, and spherical vesicles have been found in a small range of surface compositions. The kinetics of the adsorption process is consistent with the assumption of spherical vesicles as long-living intermediates for surfaces of a high 6-mercaptohexanol content. No long-living spherical vesicles have been detected for surfaces with a large fraction of EO(3)Cholesteryl tethers. The observed differences between the surfaces suggest that for the formation of tBLMs (unlike supported BLMs) no critical surface coverage of vesicles is needed prior to lipid bilayer formation.     

Supported bilayer lipid membrane arrays on photopatterned self-assembled monolayers

This work demonstrates the use of photocleavable cholesterol derivatives to create supported bilayer lipid membrane arrays on silica. The photocleavable cholesteryl tether is attached to the surface by using the reaction of an amine-functionalized self-assembled monolayer (SAM) and the N-hydroxysuccinimide-based reagent 9. The resultant SAM contains an ortho-nitrobenzyl residue that can be cleaved by photolysis by using soft (365 nm) UV light regenerating the original amine surface, and which can be patterned using a mask. The photoreaction yield was approximately 75 % which was significantly higher than previously found for related ortho-nitrobenzyl photochemistry on gold substrates. The SAMs were characterized by means of contact angle measurements, ellipsometry and X-ray photoelectron spectroscopy. Patterned surfaces were characterized with SEM and AFM. After immersing the patterned surface into a solution containing small unilamellar vesicles of egg phosphatidylcholine (PC), supported lipid membranes were formed comprised of lipid bilayer over the amine functionalized "hydrophilic" regions and lipid monolayer over the cholesteryl "hydrophobic" regions. This was confirmed by fluorescence microscopy and AFM. FRAP studies yielded a lateral diffusion coefficient for the probe molecule of 0.14+/-0.05 microm(2) s(-1) in the bilayer regions and approximately 0.01 microm(2) s(-1) in the monolayer regions. This order of magnitude difference in diffusion coefficients effectively serves to isolate the bilayer regions from one another, thus creating a bilayer array.