Amperometric biosensors based on electrosynthesised polymeric films

The most significant goals achieved in the course of the last decade in the design of amperometric biosensors based on redox enzymes entrapped in electrosynthesised polymeric films are reviewed. Particular emphasis is devoted to non-conducting polymers with built-in permselectivity that revealed very promising materials for designing fast-response and interference-free, H₂O₂ detecting, amperometric biosensors. The role of surface analytical techniques to provide structural information allowing a better understanding of polymers properties and their relationship with the ultimate performance of the final device is also outlined. The most relevant applications of amperometric biosensors based on electropolymerised films to real samples analysis are also reviewed and some possible future trends highlighted. Received: 12 November 1999 / Revised: 10 January 2000 / Accepted: 16 January 2000     

电聚高分子膜固定化酶生物传感器及其进展

本文将电化学聚合高分子膜固定膜酶制备的生物传感器分为以下三种主要类型，并分别 就其发展概况和发展方向进行了评述。即：以溶解氧为电子受体的的生物传感器（第一代电流型生物传感器）；以非氧介全为电子受体的生物传感器（第二代电流型生物传感器）和电子在酶和聚合高分膜之间直接进行转移的传感器（第三代电流型生物传感器）。     

Recent Advances in Electropolymerized Conducting Polymers in Amperometric Biosensors

Conducting electroactive polymers (CPs) are materials discovered just over 20 years ago which have aroused considerable interest on account of their electronic conducting properties and unique chemical and biochemical properties. Consequently, they have numerous (bio)analytical and technological applications. CPs are easily synthesized and deposited onto the conductive surface of a given substrate from monomer solutions by electrochemical polymerization with precise electrochemical control of their formation rate and thickness. Coating electrodes with CPs under mild conditions opens up enormous possibilities for the immobilization of biomolecules and bioaffinity or biorecognizing reagents, the improvement of their electrocatalytic properties, rapid electron transfer and direct communication to produce a range of analytical signals and new analytical applications. Co-immobilization of other molecules (enzymatic co-factors or charge-transfer mediators) by entrapment within electropolymerized films or by covalent binding on these films permits straightforward fabrication of reagentless biosensors. The characteristics of CPs and their uses, mainly in amperometric biosensors, are reviewed. The most recent applications and lines of research related to CP films are summarized in the different sections of the paper, and probable future trends are discussed.     

Comparison of biosensors based on entrapment of cholesterol oxidase and cholesterol esterase in electropolymerized films of polypyrrole and diaminonaphthalene derivatives for amperometric determination of cholesterol

Cholesterol amperometric biosensors constructed with enzymes entrapped in electropolymerized layers of polypyrrole and poly-naphthalene derivative polymers are compared. The biosensors are based on entrapment of cholesterol oxidase and/or cholesterol esterase in monolayer or multilayer films electrochemically synthesised from pyrrole, 1,8-diaminonaphthalene (1,8-DAN), and 1,5-diaminonaphthalene (1,5-DAN) monomers. Seven configurations were assayed and compared, and different analytical properties were obtained depending on the kind of polymer and the arrangement of the layers. The selectivity properties were evaluated for the different monolayer and bilayer configurations proposed as a function of the film permeation factor. All the steps involved in the preparation of the biosensors and determination of cholesterol were carried out in a flow system. Sensitivity and selectivity depend greatly on hydrophobicity, permeability, compactness, thickness, and the kind of the polymer used. In some cases a protective outer layer of non-conducting poly(o-phenylenediamine) polymer improves the analytical characteristics of the biosensor. A comparative study was made of the analytical performance of each of the configurations developed. The biosensors were also applied to the flow-injection determination of cholesterol in a synthetic serum.     

Conducting polymers in chemical sensors and arrays

The review covers main applications of conducting polymers in chemical sensors and biosensors. The first part is focused on intrinsic and induced receptor properties of conducting polymers, such as pH sensitivity, sensitivity to inorganic ions and organic molecules as well as sensitivity to gases. Induced receptor properties can be also formed by molecularly imprinted polymerization or by immobilization of biological receptors. Immobilization strategies are reviewed in the second part. The third part is focused on applications of conducting polymers as transducers and includes usual optical (fluorescence, SPR, etc.) and electrical (conductometric, amperometric, potentiometric, etc.) transducing techniques as well as organic chemosensitive semiconductor devices. An assembly of stable sensing structures requires strong binding of conducting polymers to solid supports. These aspects are discussed in the next part. Finally, an application of combinatorial synthesis and high-throughput analysis to the development and optimization of sensing materials is described.     

Electrochemical enzymatic biosensors based on metal micro-/nanoparticles-modified electrodes: a review

The functions of metal structures of micro- or nano-dimensions in the sensing mechanisms of amperometric enzyme-based biosensors are considered in the light of the principles of detection of the latter. The applications of metal mono- or bimetallic nanoparticles-modified materials as catalytic electrodes in the fabrication of first-generation and the role which metal nanoparticles play in promoting or enhancing the electron transfer rates in third-generation electrochemical biosensors are reviewed. Some examples of gold NPs functionalised with enzymes via gold-thiol chemistry as a strategy for enzyme immobilisation and spatial orientation when developing amperometric biosensors are also discussed.     

纳米电化学生物传感器

纳米电化学生物传感器是将纳米材料作为一种新型的生物传感介质,与特异性分子识别物质如酶、抗原/抗体、DNA等相结合,并以电化学信号为检测信号的分析器件。本文简要介绍了生物传感器的分类和纳米材料在电化学生物传感器中的应用及其优势,综述了近年来各类纳米电化学生物传感器在生物检测方面的研究进展,包括纳米颗粒生物传感器,纳米管、纳米棒、纳米纤维与纳米线生物传感器,以及纳米片与纳米阵列生物传感器等。     

Affinity Biosensors Based on Electropolymerized Films

This review gives an overview on different types of affinity biosensors based on electropolymerized polymer films that are becoming an important class of analytical tools. These affinity biosensors may be classified according to the strategy used for their fabrication, namely entrapment within polymers during their electrochemical growth, simple adsorption onto electropolymerized films, chemical coupling or affinity interactions between bioreceptors and electropolymerized films or direct electrochemical polymerization of the bioreceptor itself. Recently opened perspectives and potential research directions are also discussed.     

Electron-transfer mechanisms in amperometric biosensors

The function of amperometric biosensors is related to electron-transfer processes between the active site of an (immobilized) enzyme and an electrode surface which is poised to an appropriate working potential. Problems and specific features of architectures for amperometric biosensors using different electron-transfer pathways such as mediated electron transfer, electron-hopping in redox polymers, electron transfer using mediator-modified enzymes and carbon-paste electrodes, direct electron transfer by means of self-assembled monolayers or via conducting-polymer chains are discussed.     

纳米结构聚吡咯构建的生物传感器

本文总结了纳米结构聚吡咯对生物分子的固定方法如吸附法、电化学聚合包埋法、共价键偶联法以及分子印迹法,重点评述了基于纳米结构聚吡咯的电流型生物传感器,如酶、核酸、免疫传感器等的工作原理和探测性能.指出聚吡咯纳米敏感材料优良的选择透过性和高比表面积有利于生物分子的固定,提高了生物传感器的敏感度;聚吡咯良好的生物相容性和抗干扰性,可以很好地保持生物分子的活性,提高生物传感器的选择性和环境稳定性;聚吡咯与其它敏感材料如碳纳米管或金属纳米粒子复合,两者的协同效应使电极的电化学信号放大、电催化活性可提高2～4个数量级.检出限最高可提升5万倍;聚吡咯纳米生物传感器在生物医学工程、临床诊断、环境监测、食品卫生和科学等领域展现出广阔的应用前景.     

The application of boron-doped diamond electrodes in amperometric biosensors

Boron-doped diamond (BDD) electrodes outperform conventional electrodes in terms of high stability, chemical inertness, wide potential window and low background current. Combining the superior properties of BDD electrodes with the merits of biosensors, such as specificity, sensitivity, and fast response, amperometric biosensors based on BDD electrodes have attracted the interests of many researchers. In this review, the latest advances of BDD electrodes with different surfaces including hydrogen-terminated, oxygen-terminated, metal nanoparticles-modified, amine-terminated, and carboxyl-terminated thin films, and microelectrodes, for the construction of various biosensors or the direct detection of biomolecules were demonstrated. The future trends of BDD electrodes in biosensing were also discussed.     

Electrochemical biosensors based on enzymes immobilized in electropolymerized films

A review based on 135 references concerns the design and properties of electrochemical biosensors for 13 different substrates of enzymatic reactions. In the sensors discussed the enzymes are immobilized within or on the top of electropolymerized films, mostly of conducting polymers. Amperometric detection is most often used for internal electrochemical sensing.Dedicated to our late colleague Wojciech Matuszewski     

A procedure for determining 2,4-dichlorophenoxyacetic acid using immobilized molecular imprinted polymers and an amperometric biosensor

A combined procedure was suggested for determining dichlorophenoxyacetic acid using polyacrylamide-based polymers immobilized in a nitrocellulose matrix with molecular imprints and amperometric cholinesterase biosensors. The sorbability of 2,4-dichlorophenoxyacetic acid on the immobilized polymers and reference polymers was evaluated, and the quantitative characteristics of the sorption-desorption process were calculated.     

基于担载贵金属纳米粒子聚苯二胺的生物传感器

系统论述了基于聚苯二胺的电流型生物传感器,如过氧化氢传感器、葡萄糖传感器和免疫传感器等的探测性能。指出聚苯二胺中的大量氨基/亚胺基及其膜的形态结构有助于加大贵金属纳米粒子的载入量,这种载有贵金属的聚苯二胺对酶的高效锚定作用以及贵金属纳米粒子的快速电子传输能力使其具有明显的电流增敏效果。聚苯二胺膜具有优异的选择透过性能,对抗坏血酸、脲酸、醋氨酚等常见干扰物质具有较强的抗干扰能力。由此制备的生物传感器生物物质探测与分析等领域展现出了广阔的应用前景。     

Bio-smart materials: kinetics of immobilized enzymes in p(HEMA)/p(pyrrole) hydrogels in amperometric biosensors

Various strategies are being pursued to confer the highly specific molecular recognition properties of bioactive molecules to the transducer action of inherently conductive polymers. We have successfully integrated inherently conductive polypyrrole within electrode-supported, UV cross-linked hydroxyethyl methacrylate (HEMA)-based hydrogels. These electroactive composites were used as matrixes for the physical immobilization of several oxidase enzymes to fabricate clinically important biosensors. Measurements were made of the amperometric responses via H₂O₂ oxidation for each biosensor. Apparent Michaelis constants, K_m(app), for glucose oxidase immobilized in p(HEMA) membranes and in p(HEMA)/p(Pyrrole) composite membranes were 13.8 and 43.7 mM respectively compared to 33 mM in solution. The inclusion of polypyrrole in the hydrogel network increased the thermal stability of the immobilized enzyme at 60°C by 30% and 40% compared to p(HEMA) membranes and solution phase respectively. The composite also yielded larger I_max values (19 μA/cm⁻²) for glucose biosensors compared to similar glucose biosensors fabricated without the conducting polymer (15 μA). K_m(app) values for cholesterol oxidase immobilized in the same composite films were ca. three orders of magnitude higher than the K_m for the soluble enzyme. The polypyrrole component is shown to reduce diffusive transport but to confer thermal stability to these biosensors.     

Conducting polymer based amperometric enzyme electrodes

The construction and the properties of conducting-polymer based amperometric enzyme electrodes are reviewed. The main aim is to focus on the properties of conducting polymer films which are important for the construction of amperometric enzyme electrodes. Additionally, the review is focused on electron-transfer pathways between conducting-polymer integrated immobilized enzyme molecules and the modified electrode using free-diffusing redox mediators as well as direct electron transfer via the conducting-polymer wires. Possible future applications using microstructured conducting-polymer films will be discussed.     

Design and use of electrochemical sensors in enantioselective high throughput screening of drugs. A minireview

The importance of reliable detection systems for enantiomeric assays increases with the necessity of high throughput screening analysis of raw materials for the pharmaceutical industry. The utilization of electrochemical sensors in enantioselective analysis is an accurate and precise alternative to chromatographic techniques. The reliability of the response characteristics as well as of the analytical information obtained by using electrochemical sensors is strictly correlated with the design of the sensors. The designs evaluated for sensors have been based on PVC, imprinting polymers and carbon paste matrices. Among these, carbon paste sensors have been the most reliable and have been utilized for the construction of potentiometric, enantioselective membrane electrodes as well as for amperometric biosensors, and immunosensors. There are two ways to use the electrochemical sensors in enantioselective screening analysis: selective binding and catalyst selectivity. A molecule with a special chemical architecture is required for selective binding: a lock for a key. The high reliability of analytical information obtained using these sensors has made possible the automation of potentiometric and amperometric techniques by integration of enantioselective sensors as detectors in flow injection analysis and sequential injection analysis techniques.     

Electrodeposition polymers as immobilization matrices in amperometric biosensors: improved polymer synthesis and biosensor fabrication

Electrodeposition polymers can be precipitated on electrode surfaces upon electrochemical-induced modulations of the pH value in the diffusion zone in front of the electrode. The formed polymer films can be used as immobilization matrices in amperometric biosensors. In order to rationally control the thus obtained biosensor properties, it is indispensable to develop strategies for the reproducible synthesis of electrodeposition polymers as well as methods for the non-manual and reproducible sensor fabrication. Based on instrumental developments such as a specifically designed parallel synthesizer with improved stirring and temperature control, an automatic pipetting robot for the preparation of the monomer mixtures and controlled removal of polymerization inhibitors, the reproducible synthesis of libraries of electrodeposition polymers was achieved. Moreover, the polymerization process could be monitored using in-line thermocouples, and it could be shown that the chosen strategies led to reproducible polymerization reactions. By adaptation of an electrochemical robotic system integrating a Au microtiter plate and automatic electrode cleaning by means of a polishing wheel reproducible biosensor fabrication using glucose oxidase as a model enzyme could be demonstrated. These results open the route for the rational development of biosensors and control of the sensor properties by choosing specifically designed electrodeposition polymers.      

Development of biosensors based on hexacyanoferrates

Ferric and copper hexacyanoferrates (PB and CuHCF, respectively) were electrodeposited on glassy carbon electrodes providing a suitable catalytic surface for the amperometric detection of hydrogen peroxide. Additionally glucose oxidase was immobilized on top of these electrodes to form glucose biosensors. The biosensors were made by casting glucose oxidase-Nafion layers onto the surface of the modified electrodes. The operational stability of the films and the biosensors were evaluated by injecting a standard solution (5 muM H(2)O(2) for PB, 5 mM H(2)O(2) for CuHCF and 2.5 mM glucose for both) over 5-10 h in a flow-injection system with the electrodes polarized at -50 (PB) and -200 mV (CuHCF) versus Ag/AgCl, respectively. The glucose biosensors demonstrated suitability for glucose determination: 0.0-2.5 mM (R(2)=0.9977) for PB and 0.0-10 mM (R(2)=0.9927) for CuHCF, respectively. The visualization of the redox catalyst modifiers (PB and CuHCF films) was presented by scanning electron micrographs.     

Application of Amperometric Enzyme Biosensors for Wine and Must Analysis

The work presents application of amperometric biosensors based on platinum printed electrodes and immobilized enzymes alcohol oxidase, glucose oxidase and lactate oxidase for wine analysis. Created devices demonstrate wide dynamic range of work, good stability and high selectivity to the substrate, and are successfully applied for analysis of such complex mixtures as wine and must. Good correlation of the results of analysis of different wines and must obtained by amperometric biosensors and chromatography method is shown. Created biosensors can be used as a basis of commercial device for express analysis of ethanol, glucose and lactate in wine and must during its fermentation.