Growth,structural, crystallisation,thermal decomposition and dielectric behaviour of melaminium bis(hydrogen oxalate) single crystal

Single crystals of melaminium bis (hydrogen oxalate) (MOX) single crystals have been grown from aqueous solution by slow solvent evaporation method at room temperature. X-ray powder diffraction analysis confirms that MOX crystallises in monoclinic system with space group C2/c. The calculated lattice parameters are a = 20.075 ± 0.123 Å b = 8.477 ± 0.045 Å, c = 6.983 ± 0.015 Å, α = 90°, β = 102.6 ± 0.33°, γ = 90° and V = 1,159.73 (Å)³. Thermogravimetric analysis at three different heating rates 10, 15 and 20 °C min^?1 has been done to study the thermal decomposition behaviour of the crystal. Non-isothermal studies on MOX reveal that the decomposition occurs in two stages. Kinetic parameters [effective activation energy (E _a), pre-exponential factor (ln A)] of each stage were calculated by model-free method: Kissinger, Kim–Park and Flynn–Wall method and the results are discussed. A significant variation in effective activation energy (E _a) with conversion progress (α) indicates that the process is kinetically complex. The linear relationship between the ln A and E _a was established (compensation effect). DTA analyses were conducted at different heating rates and the activation energy was determined graphically from Kissinger and Ozawa equation. The average effective activation energy is calculated as 276 kJ mol^?1 for the crystallization peak. The Avrami exponent for the crystallization peak temperature determined by Augis and Bennett method is found to be 1.95. This result indicates that the surface crystallization dominates overall crystallization. Dielectric study has also been done, and it is found that both dielectric constant and dielectric loss decreases with increase in frequency and is almost a constant at high frequency region.     

Synthesis,thermal decomposition and dielectric behavior of bis(thiourea)silver(I)nitrate

New semi-organic bis(thiourea)silver(I)nitrate (TuAgN) single crystals have been grown from slow evaporation solution growth technique. Single crystal X-ray diffraction study reveals that the crystal belongs to orthorhombic system with the non-centrosymmetric space group C2221 and the calculated cell parameters are a = 33.3455 (6) Å, b = 45.2957 (7) Å, c = 20.3209 (5) Å, α = β = γ = 90°, and V = 30692.8 (10) Å ³. The thermal stability and decomposition behavior of TuAgN compound have been studied by thermogravimetric analysis at three different heating rates 5, 10, and 15 °C min^?1. The effective activation energy (E _a) and pre-exponential factor (ln A) of thermal decomposition of thiourea from TuAgN compound at three different heating rates are estimated by model free methods: Arrhenius, Flynn–Wall, Kissinger, and Kim–Park. The calculated effective activation energies were found to vary with the fraction (α) reacted. The compensation effect between the (ln A) and (E _a) has also been studied. Dielectric properties of TuAgN crystal have been studied in a wide range of frequencies and temperatures. AC conductivity has also been carried out.     

Kinetic parameters for thermal decomposition of hydrazine

The propulsion of most of the operating satellites comprises monopropellant (hydrazine––N₂H₄) or bipropellant (monometilydrazine—MMH and nitrogen tetroxide) chemical systems. When some sample of the propellant tested fails, the entire sample lot shall be rejected, and this action has turned into a health problem due to the high toxicity of N₂H₄. Thus, it is interesting to know hydrazine thermal behavior in several storage conditions. The kinetic parameters for thermal decomposition of hydrazine in oxygen and nitrogen atmospheres were determined by Capela–Ribeiro nonlinear isoconversional method. From TG data at heating rates of 5, 10, and 20 °C min^?1, kinetic parameters could be determined in nitrogen (E = 47.3 ± 3.1 kJ mol^?1, lnA = 14.2 ± 0.9 and T _b = 69 °C) and oxygen (E = 64.9 ± 8.6 kJ mol^?1, lnA = 20.7 ± 3.1 and T _b = 75 °C) atmospheres. It was not possible to identify a specific kinetic model for hydrazine thermal decomposition due to high heterogeneity in reaction; however, experimental f(α)g(α) master-plot curves were closed to F _1/3 model.     

Application of isoconversional calculation procedure to non-isothermal kinetics study

The kinetics of thermal decomposition of NH₄CuPO₄·H₂O was studied using isoconversional calculation procedure. The iterative isoconversional procedure was applied to estimate the apparent activation energy E _a; the values of apparent activation energies associated with the first stage (dehydration), the second stage (deamination), and the third stage(condensation) for the thermal decomposition of NH₄CuPO₄·H₂O were determined to be 117.7 ± 7.7, 167.9 ± 8.4, and 217.6 ± 45.5 kJ mol^?1, respectively, which demonstrate that the third stage is a kinetically complex process, and the first and second stages are single-step kinetic processes and can be described by a unique kinetic triplet [E _a, A, g(α)]. A new modified method of the multiple rate iso-temperature was used to define the most probable mechanism g(α) of the two stages; and reliability of the used method for the determination of the kinetic mechanism were tested by the comparison between experimental plot and model results for every heating rate. The results show that the mechanism functions of the two stages are reliable. The pre-exponential factor A of the two stages was obtained on the basis of E _a and g(α). Besides, the thermodynamic parameters (ΔS ^≠, ΔH ^≠, and ΔG ^≠) of the two stages were also calculated.     

Synthesis, structure analysis and thermodynamics of [Ni(H2O)4(TO)2](NO3)2·2H2O (TO = 1,2,4-triazole-5-one)

A novel complex [Ni(H₂O)₄(TO)₂](NO₃)₂·2H₂O (TO = 1,2,4-triazole-5-one) was synthesized and structurally characterized by X-ray crystal diffraction analysis. The decomposition reaction kinetic of the complex was studied using TG-DTG. A multiple heating rate method was utilized to determine the apparent activation energy (E _a) and pre-exponential constant (A) of the former two decomposition stages, and the values are 109.2 kJ mol^?1, 10^13.80 s^?1; 108.0 kJ mol^?1, 10^23.23 s^?1, respectively. The critical temperature of thermal explosion, the entropy of activation (ΔS ^≠), enthalpy of activation (ΔH ^≠) and the free energy of activation (ΔG ^≠) of the initial two decomposition stages of the complex were also calculated. The standard enthalpy of formation of the new complex was determined as being ?1464.55 ± 1.70 kJ mol^?1 by a rotating-bomb calorimeter.     

Thermal decomposition of sodium propoxides

Sodium alkoxides, namely, sodium n-propoxide and sodium iso-propoxide were synthesized and characterized by various analytical techniques. Thermal decomposition of these compounds was studied under isothermal and non-isothermal conditions using a thermogravimetric analyzer coupled with mass spectrometer. The onset temperatures of decomposition of sodium n-propoxide and sodium iso-propoxide were found to be 590 and 545 K, respectively. These sodium alkoxides form gaseous products of saturated and unsaturated hydrocarbons and leave sodium carbonate, sodium hydroxide, and free carbon as the decomposition residue. Activation energy, E _a, and pre-exponential factor, A, for the decomposition reactions were deduced from the TG data by model-free (iso-conversion) method. The E _a for the decomposition of sodium n-propoxide and sodium iso-propoxide, derived from isothermal experiments are 162.2 ± 3.1 and 141.7 ± 5.3 kJ mol^?1, respectively. The values obtained from the non-isothermal experiments are 147.7 ± 6.8 and 133.6 ± 4.1 kJ mol^?1, respectively, for the decomposition of sodium n-propoxide and sodium iso-propoxide.     

Evaluation of thermal stability and parameters of dissolution of nifedipine crystals

Nifedipine is a calcium channel blocker as well as a powerful vasodilator used to treat ischemic heart disease and hypertension. Its photosensitivity and very low solubility in water have been widely acknowledged as important properties deserving improvements. The main thrust of this study is to characterize the nature and the solid-state of nifedipine crystals obtained using different solvents as well as assess the stability by thermal methods (TG and DSC) and crystals structure by means of spectroscopic techniques (MID FTIR and XRD) and assess the dissolution parameters for such crystals. The calculated kinetic parameters activation energy (E _a = 123.3 kJ mol^?1 ± 0.1), the factor frequency (A = 25.93 ± 0.9 min^?1), and the reaction order (n = 0.2) of the main stage of thermal decomposition of nifedipine raw material were performed according to the Ozawa model. The data showed a zero-order kinetic behavior for all crystals despite the different values of E _a and A. The dissolution profiles were obtained for such crystals in three dissolution media with different pH values. After 1 h of dissolution, the higher amount of nifedipine dissolved was observed for crystals obtained in isopropyl alcohol (52.5 %, pH 4.5), followed by those in chloroform (48.1 %, pH 1.2) and subsequently in acetone (32.5 %, pH 6.8). Results showed different thermal stabilities and significant variations in the solubility of the crystals.     

Computational study on the crystal structure, thermodynamic properties, detonation performance and pyrolysis mechanism of a novel high density cage compound 10-(5-nitrimino-1,2,3,4-tetrazol-1-yl)methyl-2,4,6,8,12-pentanitrohexaazaisowurtzitane

A novel polynitro cage compound 10-(5-nitrimino-1,2,3,4-tetrazol-1-yl)methyl-2,4,6,8,12-pentanitro-hexaazaisowurtzitane, composed of CL-20 and tetrazole framework, has been designed. DFT-B3LYP/6-31G(d) and molecular mechanics methods are employed to calculate its IR spectrum, heat of formation, thermodynamic properties, and crystal structure. Besides, the stability of this compound is evaluated using the bond dissociation energy. The result shows that the initial step of thermal decomposition is the rupture of N–NO₂ bond in the side chain. This compound is most likely to crystallize in the P-1 space group, and corresponding cell parameters are Z = 2, a = 7.65 Å, b = 14.30 Å, c = 10.36 Å, α = 91.53°, β = 50.83°, γ = 89.44°, and ρ = 2.025 g cm^?3. Detonation velocity and detonation pressure of this compound are estimated to be 9.090 km s^?1 and 38.078 GPa using the Kamlet–Jacobs equation, similar to those of CL-20. Considering detonation performance and thermal stability, this compound meets the requirements of exploitable high energy density materials.     

Non-isothermal kinetic for lyophilized leachate from sanitary landfill and composting usine

Leachate samples from a sanitary landfill of Araraquara city and composting usine of Vila Leopoldina, São Paulo, Brazil were lyophilized to remove the water content. TG/DTG curves at different heating rates were recorded. The second step of the thermal decomposition of leachate from the Araraquara landfill (CB₁), from the composting usine from Vila Leopoldina (CB₂) from the organic phase extracted (FO) and aqueous phase (FA) were all kinetically evaluated using the non-isothermal method.By Flynn-Wall isoconversional method the following values were obtained: E=234±3.65 kJ mol^?1 and logA=29.7±0.58 min^?1 for CB₁; E=129±1.66 kJ mol^?1 and logA=11.8±0.10 min^?1 for CB₂; E=51.6±1.35 kJ mol^?1 and logA=6.09±0.09 min^?1 for FO and E=76.91±6.33 kJ mol^?1 and logA=8.88±0.7 min^?1 for FA with 95% confidence level. Applying the procedures of Málek and Koga, SB kinetic model (?esták-Berggren) is the most appropriate to describe the decomposition of CB₁, CB₂, FO and FA.     

Synthesis,crystal structure,and thermodynamics of a high-nitrogen copper complex with <Emphasis Type="Italic">N</Emphasis>, <Emphasis Type="Italic">N</Emphasis>-bis-(1(2)H-tetrazol-5-yl) amine

A new high-nitrogen complex [Cu(Hbta)₂]·4H₂O (H₂bta = N,N-bis-(1(2)H-tetrazol-5-yl) amine) was synthesized and characterized by elemental analysis, single crystal X-ray diffraction and thermogravimetric analyses. X-ray structural analyses revealed that the crystal was monoclinic, space group P2(1)/c with lattice parameters a = 14.695(3) Å, b = 6.975(2) Å, c = 18.807(3) Å, β = 126.603(1)°, Z = 4, D _c = 1.888 g cm^?3, and F(000) = 892. The complex exhibits a 3D supermolecular structure which is built up from 1D zigzag chains. The enthalpy change of the reaction of formation for the complex was determined by an RD496–III microcalorimeter at 25 °C with the value of ?47.905 ± 0.021 kJ mol^?1. In addition, the thermodynamics of the reaction of formation of the complex was investigated and the fundamental parameters k, E, n, \( \Updelta S_{ \ne }^{{{\uptheta}}} \), \( \Updelta H_{ \ne }^{{{\uptheta}}} \), and \( \Updelta G_{ \ne }^{{{\uptheta}}} \) were obtained. The effects of the complex on the thermal decomposition behaviors of the main component of solid propellant (HMX and RDX) indicated that the complex possessed good performance for HMX and RDX.     

Microwave spectrum and structure of CF3OOCl

The microwave spectrum of chloroperoxytrifluoromethane has been recorded from 12.5 to 40.0 GHz. Only a-type transitions were observed. The R-branch assignments have been made for both the CF₃OO³⁵C1 and CF₃OO³⁷Cl species for the ground vibrational state. The rotational constants are: A=4808± 12, B=1318.55±0.02, C=1278.28±0.02 MHz for the ³⁵CI species, and A=4748±300,B=1285.28±0.96, C=1246.80±0.96 MHz for the ³⁷Cl species. From a diagnostic least-squares adjustment to fit the six rotational constants the following structural parameters were obtained: r(C-0)=1.377±0.03 Å, r(O-O)=1.445± 0.049 Å, r(Cl-O)=1.69±0.04 Å, ∠COO=108.1±4.2°, ∠ClOOC=99.5±2.0°, and ∠tilt = 6.0±0.9° with reasonable assumptions for the three other structural parameters. The relatively large uncertainty in these structural parameters results from the large uncertainty in the A rotational constants. These parameters are compared to the corresponding ones in some other peroxides. The quadrupole coupling constants have been obtained and are discussed.     

Crystal structure and thermal decomposition mechanism of a 5-aminotetrazole copper(II) complex

A novel 5-aminotetrazole mixed ligands complex of formula [Cu(PTS)₂(ATZ)₂(H₂O)₂] (C₁₆H₂₄CuN₁₀O₈S₂, PTS = p-toluenesulfonate, ATZ = 5-aminotetrazole) has been obtained by the reaction of 5-aminotetrazole with copper acetate and p-toluenesulfonic acid on heating in water. It was characterized by elemental analysis, FT-IR spectroscopy, and X-ray single crystal diffraction. The compound crystallizes in monoclinic system, space group P2₁/c, Z = 2, a = 14.079(4) Å, b = 6.088(3) Å, c = 14.632(4) Å, β = 105.268(4)°, V = 1209.8(5) Å³. The central copper(II) cation is coordinated by two N atoms and four O atoms from two ATZ ligands, two water molecules and two p-toluenesulfonate ions to form a six-coordinated and distorted octahedral structure. Neutral ATZ is coordinated in the monodentate mode by the N(4) atom. The sulfonate group of the PTS ligand remains weak-coordinated modes and forms a number of hydrogen bonds with water molecule ligands and ATZ ligands. A supramolecular framework is connected by electrostatic interaction, weak coordinated bonding, hydrogen-bonding, and π–π interaction. The thermal decomposition mechanism of the title compound was predicted based on DSC, TG-DTG, and FT-IR analyses. Thermolysis of ATZ and its several derivatives is compared.     

Chemistry of trifluorostyrenes and their dimmers: 3. Solvent effect on the kinetic parameters of the thermal cyclodimerization of α, β, β-trifluorostyrene1

Rate constants for the thermal cyclodimerization of α, β, β-trifluorostyrene (TFS) were determined in six solvents at 393°K. The products of this reaction were mixtures of roughly equal amounts of cis-trans isomers. The rate constants in 3 solvents, were calculated according to Arrhenius equation. In n-hexane, log A = 6.02±0.18, E_a= 19.5±0.3 kcal.mol^?1; in glyme, logA = 5.31 ± 0.19, E_a= 18.0±0.3 kcal.mol^?1; in methanol, IogA=4.93±0.13, E_a=17.1±0.3 kcal mol^?1. All data are consistent with a stepwise radical mechanism, and our reaction in this solvent series obeys an isokinetic relationship, with β = 478°K.     

Thermal parameters study of 1,1-bis(tert-butylperoxy)cyclohexane at low heating rates with differential scanning calorimetry

Having two active peroxide groups, 1,1-bis(tert-butylperoxy)cyclohexane (BTBPC) has a certain degree of thermal instability. It is usually used as an initiator in a chemical process, and therefore, careless operation could result in severe accidents. This study emphasized the runaway reactions of BTBPC 70 mass% (4.5–5.2 mg), the relevant thermokinetic parameters, and the thermal safety parameters. Differential scanning calorimetry was used to evaluate the above-mentioned thermokinetic parameters, using four low heating rates (0.5, 1, 2, and 4 °C min^?1) combined with kinetic simulation method. The results indicated that apparent exothermic onset temperature (T _o), apparent activation energy (E _a), and heat of decomposition (ΔH _d) were ca. 118 °C, 156 kJ mol^?1, and 1,080 kJ kg^?1, respectively. In view of process loss prevention, at the low heating rates of 0.5, 1, 2, and 4 °C min^?1, storing BTBPC 70 mass% below 27.27 °C is a more reassuring approach.     

Synthesis of diferrocenylmethoxyethanol via reaction of diferrocenylmethyl cabonium with glycol and its crystal structure

The new compound diferrocenylmethoxyethanol has been synthesized from the reaction of glycol in the presence of triethylamine with diferrocenylmethyl carbonium which was generated by diferrocenylmethanol treated with BF₃ in CH₂Cl₂ without separation from the reaction mixture. Diferrocenylmethoxyethanol was characterized by elemental analysis, ¹H NMR and IR. The structure was also confirmed by a X-ray single crystal study. It was found that diferrocenylmethoxylethanol crystallized in a monoclinic P2₁ space group and a=5.8250(8) Å, b=7.4034(10) Å, c=21.773(3) Å, α=90°, β=95.020(3)°, γ=90°, V=935.4(2) Å³, Z=2, D _c=1.577 mg·m^?3, μ=1.566 mm^?1, F(0 0 0)=460.     

Thermokinetics simulation for multi-walled carbon nanotubes with sodium alginate by advanced kinetics and technology solutions

To accomplish an effective analysis of adsorption, the strong acid dye from aqueous solution of sodium alginate (SA) and multi-walled carbon nanotubes (MWCNTs) composite gel beads were used as important parameters. Differential scanning calorimetry (DSC) was used to measure the heat of breakdown reaction. The experimental conditions were set at 0.5, 1, 2, 4, and 8 °C min^?1, and the temperature range was 30–300 °C. The heating rates and the temperature range were set as follows: Four kinds of proportion in this experiment contained 2 SA % w/v (SA), 0.03, 0.09, 0.18, 0.36 % w/v (MWCNTs), and 10 % w/v calcium chloride, respectively. Four samples, 5, 6, 7, 8, and 9 mg, were used to detect the experimental data. It contributed to understanding the reaction for the distinctive MWCNTs. With the thermokinetic data by isoconversional approach obtained from advanced kinetics and technology solutions (AKTS), the related thermal safety information can be obtained from the thermal reaction of MWCNTs. Valuable parameters, such as activation energy (E _a) and heat of decomposition, can be applied in operation, including adsorption and desorption processes. After DSC tests, and under the four compositions of SA/MWCNTs, at different heating rates of 0.5, 1, 2, 4, and 8 °C min^?1, primarily we found that when the heating rate was increased, exothermic onset temperature would increase gradually. After analyzing E _a value by isoconversional kinetics, we learned that in four different adsorption compositions, SA/MWCNTs_0.03 (161.20 kJ mol^?1) was the minimum. Among them, the highest value was SA/MWCNTs_0.18 (220.48 kJ mol^?1). However, in this study, for SA/MWCNTs compositions we found that E _a value will drop in the final material SA/MWCNTs_0.36. Accordingly, if the ratio of SA and calcium chloride was fixed, then different compositions of the MWCNTs would affect adsorption efficiency of SA/MWCNTs and E _a variation.     

Ca(II) and Ba(II) methyl carbazate energetic complexes: syntheses,crystal structures,and properties

New energetic materials, [Ca(MCZ)₃(H₂O)₂](ClO₄)₂ and {[Ba₂(MCZ)₄(H₂O)₂(μ₁-ClO₄)₂(μ₂-ClO₄)₂]_0.5}_n, are synthesized and tried as alternatives to common primary explosives. Both the crystal structures were determined by single-crystal X-ray diffraction. The crystal of [Ca(MCZ)₃(H₂O)₂](ClO₄)₂ belongs to the monoclinic, P2₁/c space group, a = 14.168(3) Å, b = 8.5938(18) Å, c = 18.889(4) Å, β = 111.234(2)°, V = 2143.8(8) Å³, ρ = 1.6893 g cm^?3, and {[Ba₂(MCZ)₄(H₂O)₂(μ₁-ClO₄)₂(μ₂-ClO₄)₂]_0.5}_n belongs to the triclinic, P-1 space group, a = 7.166(2) Å, b = 10.461(2) Å, c = 11.738(4) Å, α = 110.563(5)°, β = 93.799(2)°, γ = 96.864(3)°, V = 812.4(4) Å³, ρ = 2.185 g cm^?3. Their thermal stabilities were investigated by differential scanning calorimetry (DSC), and exothermic peak temperatures with a heating rate of 10 °C min^?1 are 249.7 and 181.7 °C, respectively. Non-isothermal reaction kinetics parameters were calculated via both Kissinger’s method and Ozawa-Doyle’s method to work out E_K = 124.6 kJ mol^?1, lgA_K = 10.38, E_O = 126.7 kJ mol^?1 for the calcium complex and E_K = 100.3 kJ mol^?1, lgA_K = 9.50, E_O = 102.6 kJ mol^?1 for the barium complex. Additionally, the critical temperatures of thermal explosion, ΔS^≠, ΔH^≠, and ΔG^≠ were calculated as ?231.2 J K^?1 mol^?1, 120.417 kJ mol^?1, 236.728 kJ mol^?1 for the calcium complex and ?230.6 J K^?1 mol^?1, 96.723 kJ mol^?1, 195.938 kJ mol^?1 for the barium complex. As for their explosive nature, sensitivities toward impact and friction were tested. Both [Ca(MCZ)₃(H₂O)₂](ClO₄)₂ and {[Ba₂(MCZ)₄(H₂O)₂(μ₁-ClO₄)₂(μ₂-ClO₄)₂]_0.5}_n are insensitive to friction (>360 N); their impact sensitivities are acceptable (20 and 13 J). Both compounds are energetic complexes.     

Thermal properties and kinetics of new-generation posterior bulk fill composite cured light-emitting diodes

In this study, the thermal behavior in terms of glass transition (T _g), degradation, and thermal stability of four commercial new-generation posterior bulk fill composites (Surefill SDR, Dentsply; Quixfill, Dentsply; Xtrabase, Voco; and Xtrafill, Voco) activated by light-emitting diodes (LEDs) was analyzed by thermogravimetric analysis (TG), differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA). The activation energies (E _a) for the decomposition of the dental resins were calculated based on the Kissinger and Doyle kinetic models from the peaks of the endothermic curves obtained when the specimens were heated at four different temperatures (5, 10, 15, and 20 °C min^?1) during DSC. The results show that the Xtrabase composite displayed the highest T _g (120 °C at a 5 °C min^?1 heating rate) and E _a (157.64 kJ mol^?1) values associated with thermal degradation from the main chain of the polymer.     

Synthesis, growth, thermal, optical, mechanical and dielectric studies of N-succinopyridine

Organic nonlinear optical (NLO) material, N-succinopyridine (NSP), was synthesised and bulk single crystals were grown from aqueous solution using isothermal solvent evaporation technique. The stoichiometric form of NSP has been confirmed by carbon–hydrogen–nitrogen analysis. NSP crystallizes in orthorhombic system with non-centrosymmetric space group P2₁2₁2₁ and unit cell dimensions a = 7.721(2) Å, b = 7.762(3) Å, c = 14.951(3) Å. The thermal stability, thermal decomposition and specific heat capacity of NSP have been investigated by thermogravimetric/differential thermal analysis, differential scanning calorimetric (DSC) analysis and modulated DSC analysis. A wide transparency window, 294–1,100 nm, useful for optoelectronic applications is indicated by UV–Vis–NIR studies. The NLO second harmonic generation efficiency analysis using Nd:YAG laser (1,064 nm) revealed that the SHG efficiency of NSP is about 1.2 times higher than that of standard potassium dihydrogen phosphate powder of comparable size and more importantly that it is phase-matchable. The room temperature mechanical behaviours of NSP have been tested using Vicker’s microhardness tester and the results were analysed through classical Mayer’s law. The dielectric behaviours such as dielectric constant, dielectric loss and ac conductivity of NSP single crystal have also been investigated as a function of frequency (20 Hz–1 MHz) and temperature (308–358 K).     

Melting of orthorhombic betulin

Orthorhombic (s.g. P 2₁ 2₁ 2, a = 28.6145 Å, b = 27.4115 Å, c = 6.9536 Å, V = 5454.1 Å³) betulin (C₃₀H₅₀O₂) was found in this study to melt at 245 °C with the enthalpy of fusion 40.3 J mol^?1. The shape of the peak of melting gives rise to the belief that there are several polymorphs of betulin.