Bimetallic CuCo Derived from Prussian Blue Analogue for Nonenzymatic Glucose Sensing

Bimetallic CuCo composites are prepared by calcinating copper hexacyanocobaltate precursor in N₂ atmosphere. The CuCo modified electrodes are fabricated for nonenzymatic glucose sensing in the alkaline electrolyte. The glucose can be directly electro-oxidized on the surface of the electrode catalyst mediated by the redox couples of Cu and Co. The optimal glucose sensor exhibits a high sensitivity (567 μA ⋅ mM⁻¹ ⋅ cm⁻²) in the range up to 825 μM with a detection limit of 3 μM and acceptable selectivity. The sensor can also be applied in serum samples. This work provides a facile and easily-scalable synthesis method of electrocatalysts for nonenzymatic glucose sensors.     

Highly Sensitive Nonenzymatic Glucose Sensor Based on 3D Ultrathin NiFe Layered Double Hydroxide Nanosheets

As a promising electrode material, Ni‐based nanomaterials exhibit a remarkable electrochemical catalytic activity for nonenzymatic glucose sensors. In this paper, Nickel–Iron layered double hydroxide (NiFe‐LDH) film electrode with ultrathin nanosheets and porous nanostructures was synthesized directly on Ni foam (NF) by a one‐step hydrothermal method. The as‐obtained NiFe‐LDH electrode was adopted for glucose detection without further treatment. As an integrated binder‐free electrode for glucose sensor, the NiFe‐LDH/NF hybrid exhibits a superior sensitivity of 3680.2 μA mM⁻¹ cm⁻² with a low limit of detection (0.59 μM, S/N=3) as well as fast response time (<1 s). An excellent selectivity from potential interference species such as ascorbic acid, uric acid and Cl⁻ ions and acceptable stability were also achieved. The outstanding performance can be ascribed to the abundant electrochemistry active sites, facilitative diffusion of the electrolyte, high electron transfer rate and reliable stability architecture. Therefore, the NiFe‐LDH nanosheets demonstrate potential application in non‐enzymatic sensory of glucose.     

An enhanced Nonenzymatic Electrochemical Glucose Sensor Based on Copper‐Palladium Nanoparticles Modified Glassy Carbon Electrodes

Novel copper‐palladium nanoparticles modified glassy carbon electrodes (Cu−Pd/GC) with enhanced nonenzymatic sensing for glucose were facilely prepared by one‐step electrodeposition. The structure and composition of the prepared nanoparticles were characterized by XRD, SEM, TEM and EDS, respectively. The electrode modified process was characterized by electrochemical impedance spectroscopy. Cyclic voltammetry and chronoamperometric experiments were used to evaluate the electrocatalytic activities of the electrodes toward glucose. The surface morphology and the electrocatalytic activities of Cu−Pd/GC was compared to Pd and Cu nanoparticles modified glassy carbon electrodes (Pd/GC and Cu/GC), respectively. Thanks to homogeneous distribution of Cu−Pd nanoparticles and the synergistic effect of Cu and Pd atoms, Cu−Pd/GC exhibited the highest sensitivity (298 μA mM⁻¹ cm⁻²) and the widest linear amperometric response (0.01 mM to 9.6 mM, R²=0.996) toward glucose compared to Pd/GC and Cu/GC. The detection limit of Cu−Pd/GC was 0.32 μM (S/N=3). In addition, the as‐prepared Cu−Pd/GC glucose sensor also exhibited exceptional capabilities of anti‐interference, reproducibility and long‐term stability. The as‐prepared sensor was also evaluated for determination of glucose concentration in human blood serum samples, which exhibited high reliability and accuracy, having great potential in clinical application.     

Novel Sn Doped Co3O4 Thin Film for Nonenzymatic Glucose Bio‐Sensor and Fuel Cell

A facile chemical solution deposition via two‐step spin coating technique was used to fabricate nano‐particulate novel Sn doped Co₃O₄ thin film for glucose sensor and fuel cell applications. Substitution of Sn into Co₃O₄ host lattice lead to a remarkable increase in the electrocatalytic activity of the Co₃O₄ electrode material. Film thickness played a significant role in enhancing the charge transferability of the electrode as was observed from electrochemical impedance spectroscopy (EIS). The best sensor exhibited two wide linear response ranges (2 μM up to ∼0.5 mM and 0.6 mM up to ∼5.5 mM respectively) with sensitivities of 921 and 265 μA cm⁻² mM⁻¹ respectively and low limit of detection of 100 nM (S/N=3). The sensor was very selective towards glucose in the presence of various interference and showed long term stability. Moreover, the developed thin film modified electrode could generate one electron current in nonenzymatic fuel cell setup at room temperature.     

A Novel Non-enzymatic Selective and Sensitive Glucose Sensor Based on Nickel-Copper Oxide@3D-rGO/MWCNTs

In this work, a modified 3D-rGO/MWCNT with nickel and copper oxide nanoparticles were synthesized. The structural properties of this nanocomposite were investigated by several techniques. The fabricated sensor at optimum condition potential of +0.60 V (vs. Ag/AgCl) and a rotational rate of 1800 rpm gave a detection limit of 0.04 μmol L⁻¹ with two dynamic ranges of 0.10–300 and 300–900 μmol L⁻¹ glucose with high stability. The good accuracy of the fabricated sensor was proved in the determination of glucose in a blood sample (with recoveries between 95 % to 105 % and RSDs of 1.2 to 2.5 %).     

Ferrocene Decorated N-doped Carbon Modified Electrode with Enhanced Electrocatalytic Activity towards Non-enzymatic Glucose Detection

The nitrogen doped carbon (NDCN) have been synthesized by flame synthetic method to prepare ferrocene decorated NDCN. The hydrolysis product (FC-SH) of ferrocene benzyne derivative (FC-SAc) was immobilized onto NDCN modified GCE and used for glucose detection with high sensitivity. Cyclic voltammetric analysis reveal that FC-S-NDCN/GCE exhibit excellent activity for glucose oxidation when compared to FC/GCE. The FC-S-NDCN/GCE with wide linear responses range from 0.001 to 0.01 mM with the regression co-efficient of 0.998. The FC-S-NDCN/GCE show low detection limit (LOD) of 0.08 μM and exhibit sensitivity of 1580 μA mM⁻¹ cm⁻². The FC-S-NDCN glucose sensor exhibit wide linear range, high sensitivity and lower detection limit on determination of glucose.     

Complete Glucose Electrooxidation Enabled by Coordinatively Unsaturated Copper Sites in Metal–Organic Frameworks

The electrocatalytic oxidation of glucose plays a vital role in biomass conversion, renewable energy, and biosensors, but significant challenges remain to achieve high selectivity and high activity simultaneously. In this study, we present a novel approach for achieving complete glucose electrooxidation utilizing Cu-based metal-hydroxide-organic framework (Cu-MHOF) featuring coordinatively unsaturated Cu active sites. In contrast to traditional Cu(OH)₂ catalysts, the Cu-MHOF exhibits a remarkable 40-fold increase in electrocatalytic activity for glucose oxidation, enabling exclusive oxidation of glucose into formate and carbonate as the final products. The critical role of open metal sites in enhancing the adsorption affinity of glucose and key intermediates was confirmed by control experiments and density functional theory simulations. Subsequently, a miniaturized nonenzymatic glucose sensor was developed showing superior performance with a high sensitivity of 214.7 μA mM⁻¹ cm⁻², a wide detection range from 0.1 μM to 22 mM, and a low detection limit of 0.086 μM. Our work provides a novel molecule-level strategy for designing catalytically active sites and could inspire the development of novel metal–organic framework for next-generation electrochemical devices.     

Commercial Copper Foam as an Effective 3D Porous Electrode for Nonenzymatic Glucose Detection

Commercially available copper foam (CF) was used as a 3D porous electrochemical sensing platform for nonenzymatic glucose detection. CF shows high electrocatalytic activity towards glucose oxidation and can be used directly for glucose electrochemical sensing without any pretreatment. The sensor exhibits high performance towards glucose in 0.1 M NaOH solution with the linear range from 1 μM to 0.5 mM, the sensitivity of 5.85 mA mM^?1 cm^?2 and the detection limit of 0.5 μM (S/N=3) simultaneously. Furthermore, the sensor shows a high selectivity for glucose against the common interferences and good reliability for glucose detection in human serum samples.     

Nonenzymatic Glucose Detection with Good Selectivity Against Ascorbic Acid on a Highly Porous Gold Electrode Subjected to Amalgamation Treatment

A nonenzymatic glucose sensor with good selectivity for the ascorbic acid oxidation is presented. After the gold polycrystalline electrode was subjected to amalgamation treatment, two advantageous effects were observed. One is the enhancement of the surface roughness and the other is an increase in the catalytic current in the glucose oxidation. Besides the known first effect, the latter provided another advantageous effect in a fabrication of nonenzymatic glucose sensor. Using a gold electrode subjected to amalgamation treatment for 60 s, two calibration curves for glucose oxidation at two different potentials of ?0.1 V and 0.25 V were obtained and compared. At the potential of ?0.1 V, at which no ascorbic acid was oxidized and no interference effect was observed, a current sensitivity of 16 μA cm^?2 mM^?1 from zero to 10 mM glucose concentration range was obtained. At the other potential of 0.25 V, at which ascorbic acid was easily oxidized, a satisfactory calibration curve with negligible ascorbic acid interference was also obtained together with a more enhanced current sensitivity of 32 μA cm^?2 mM^?1.     

Enzymeless Electrochemical Glucose Sensor Based on Carboxylated Multiwalled Carbon Nanotubes Decorated with Nickel (II) Electrocatalyst and Self-assembled Molecularly Imprinted Polyethylenimine

In this paper a new enzymeless electrochemical glucose sensor based on carboxylated multiwalled carbon nanotubes (cMWCNT) with immobilized nickel (II) acetylacetonate (NiL) as electrocatalyst and molecularly imprinted polymer fabricated through electrostatic self-assembling of polyethyleneimine (PEI) crosslinked with glutaric dialdehyde (GDA). The electrocatalytic properties of NiL and PEI-cMWCNT, PEI-GDA and PEI-glucose interactions is studied for the first time. Developed sensor demonstrates excellent electrocatalytic activity towards glucose oxidation and possessing high stability, sensitivity of 5897.42±161.00 μA ⋅ mM⁻¹ cm⁻², LOD of 0.138 mM and high selectivity in the presence of creatinine, L-alanine, glycine, D-glutamine, uric acid, L-ascorbic acid, urea and BSA.     

A MnOOH‐Polyaniline Nanocomposite Modified Gold Electrode for Electrochemical Sensing of Nitrite

A novel non‐enzymatic nitrite sensor was fabricated by immobilizing MnOOH‐PANI nanocomposites on a gold electrode (Au electrode). The morphology and composition of the nanocomposites were investigated by transmission electron microscopy (TEM ) and Fourier transform infrared spectrum (FTIR ). The electrochemical results showed that the sensor possessed excellent electrocatalytic ability for NO₂⁻ oxidation. The sensor displayed a linear range from 3.0 μmol•L⁻¹ to 76.0 mmol•L⁻¹ with a detection limit of 0.9 μmol•L⁻¹ (S/N = 3), a sensitivity of 132.2 μA •L•mol⁻¹•cm⁻² and a response time of 3 s. Furthermore, the sensor showed good reproducibility and long‐term stability. It is expected that the MnOOH‐PANI nanocomposites could be applied for more active sensors and used in practice for nitrite sensing.     

Layer-layer assembly for extremely stable glucose sensors

A novel fabrication of an amperometric glucose sensor by layer after layer approach is described. The sensor electrode is fabricated by arranging a layer of Pt black, a layer of glucose oxidase (GOD) and a layer of stabilizer gelatin on a shapable electro-conductive (SEC) film surface. Finally, the dried layered-assembly is cross-linked by exposing to a diluted glutaraldehyde solution. The performance of the developed sensor is evaluated by a FIA system at 37°C and under a continuous polarization at 0.4 V (vs. Ag/AgCl). The sensitivity of the sensor was dependent on the amount of GOD loaded. The highest sensitivity (3.6 μA/mM cm⁻²) of the sensor was obtained at a GOD loading of 160 μg/cm², and the linear dynamic range was extended to 80 mM level when the sensor was covered with a polycarbonate membrane. The sensor shows an extremely stable response for several weeks and a storage stability of over 2 years.     

The Rapid and Practical Route to Cu@PCR Sensor: Modification of Copper Nanoparticles Upon Conducting Polymer for a Sensitive Non-Enzymatic Glucose Sensor

In this work, rapid, sensitive, practical, and economical strategy for non-enzymatic glucose sensor has been reported based on a modification of copper nanoparticles upon conducting polymer with high surface area (Cu@PCR). Firstly, PCR conducting polymer electrode (PCR) has been successfully fabricated by electrochemical polymerization of a specially synthesized and characterized star-shaped carbazole derivative. Then copper nanoparticles have been successfully electrodeposited on the PCR as a practical method with cyclic voltammetry. The morphologies of the synthesized materials have been characterized by scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS) measurements. The Cu@PCR sensor platform has been displayed a synergistic effect of high catalytical properties of copper nanoparticles and high electroactive properties of PCR towards the glucose oxidation in alkaline medium. The Cu@PCR sensor platform has shown high sensitivity of 847 μAmM⁻¹cm⁻², good stability (10 weeks), a low detection limit of 0.043 μM, and a fast response of 3 s for the non-enzymatic electrochemical detection of glucose. This organic−inorganic hybrid composite sensor is a promising candidate for the fabrication of a highly sensitive and rapid glucose-sensing with the simple preparation procedure and use of a low-cost precursor.     

Polyaniline Nanowire Arrays Deposited on Porous Carbon Derived from Raffia for Electrochemical Detection of Imidacloprid

An electrochemical sensor based on raffia derived porous carbon (RPC) and polyaniline (PANI) composite functional glass carbon electrode (GCE) was constructed for imidacloprid (IMI) determination. PANI nanowire arrays were deposited on RPC surface uniformly without aggregations. The electrochemical response of IMI at RPC@PANI/GCE is about four times than that at bare GCE, indicating high electrocatalytic activity of RPC@PANI towards IMI reduction. The prepared sensor also offers a wide linear range of 0.1–70 μg mL⁻¹ for IMI determination with a limit of detection (LOD) of 0.03 μg mL⁻¹. In addition, it offers high recoveries with testing real samples.     

Applying Co3O4@nanoporous Carbon to Nonenzymatic Glucose Biofuel Cell and Biosensor

A novel hierarchically nanoporous carbon (NPC) derived from Al‐based porous coordination polymer is prepared by two‐step carbonization method for immobilization of the Co₃O₄ in the application of the nonenzymatic biofuel cells and biosensors. The structure and morphology are characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM), and X‐ray diffraction (XRD). Brunauer‐Emmett‐Teller (BET) is to characterize the porous nature of the NPC, and X‐ray photoelectron spectroscopy (XPS) is to characterize the composition of Co₃O₄@nanoporous carbon (Co₃O₄@NPC). Without collapse in the high carbonization temperature (above 1600 °C), the NPC maintains the nanoporous structure and high specific surface area of 1551.2 m² g⁻¹. In addition, the NPC is composited with Co₃O₄ by hydrothermal method to form the Co₃O₄@NPC. When tested as the nonenzymatic electrocatalyst for glucose oxidation reaction (GOR), the Co₃O₄@NPC exhibits higher response to glucose, in which the current shifts up by 64 %, than pure Co₃O₄ in 0.1 M KOH. The limit of detection is 0.005 mM (S/N=3) and response time is within 3 s. The detection range can be divided into two sections of 0.02–1.4 mM and 1.4–10.7 mM with the sensitivity of 249.1 μA mM⁻¹ cm⁻² and 66.6 μA mM⁻¹ cm⁻², respectively. A glucose fuel cell is constructed with the Co₃O₄@NPC as the anode and Pt/C catalyst as the cathode. The open‐circuit potential of the nonenzymatic glucose/O₂ fuel cell was 0.68 V, with a maximum power density of 0.52 mW cm⁻² at 0.27 V. This work may contribute to exploring other nanoporous carbons for application in glucose fuel cells and biosensors.     

A High Efficient Electrocatalytic Activity of Metal-organic Frameworks ZnO/Ag/ZIF-8 Nanocomposite for Electrochemical Detection of Toxic Heavy Metal Ions

A novel electrochemical sensor on ZIF-8 nanocomposites (Ag/ZnO/ZIF-8) was developed to analyze the mercury ions (Hg²⁺). The ZIF-8 materials are one of the 3-dimensional porous metal-organic frameworks with highly accessible pores and great surface area. The ZIF-8 nanocomposites were prepared through simple sol-gel methods and their physio-chemical properties were characterized via different analytical analyses. As a result of cyclic voltammetry, Ag/ZnO/ZIF-8 exhibited a better electrocatalytic behavior towards the detection of mercury ions (Hg²⁺). Furthermore, the composite modified electrode was then inspected as a sensor for DPV detection of mercury ions. The nanocomposite sensor performed a wide linear range from 0.5 μM to 140 μM with a low detection limit of 40 nM, and high sensitivity of 56.06 μA μM⁻¹ cm⁻². Moreover, the ZIF-8 composite sensor showed a higher selectivity toward the detection of mercury ions (Hg²⁺). The real-time applications of the ZIF-8 composites sensor were inspected in various samples with good sensitivity.     

Photoelectrochemical Sensor for Isoniazid: Application in Drugs Used in the Treatment of Tuberculosis

The present work describes the development of a photoelectrochemical sensor based on titanium dioxide, cadmium telluride quantum dots and the tris (2,2′-bipyridyl) ruthenium(II) chloride complex for detection of Isoniazid (INH). The Ru(bpy)₃²⁺/CdTe-QDs/TiO₂/FTO photoelectrochemical platform was characterized by scanning electrochemical microscopy, electrochemical impedance spectroscopy and amperometry. The photoelectrochemical sensor presented two linear ranges for INH concentrations ranging from 0.5 to 150 μmol L⁻¹ and 150 to 1270 μmol L⁻¹, with a theoretical detection limit of 0.02 μmol L⁻¹. The sensor was successfully applied for the determination of INH in drugs samples used in the treatment of tuberculosis.     

N-Doped Carbon Coated TiC Nanofiber Arrays on Ti-6Al-4V for Sensitive Electrochemical Determination of Cr(VI)

A sensitive electrochemical sensor for Cr(VI) detection based on N-doped carbon coated TiC nanofiber arrays (TiC@CNx NFAs) is reported. The abundant electrocatalytic active sites contained CNx shell, highly conducting TiC core, and good electrical contact between the TiC@CNx and underlying Ti alloy endow this electrode with the excellent electrochemical sensing properties. The developed electrochemical sensor shows remarkable determination activity towards Cr(VI) with a high sensitivity of 0.88 μA μM⁻¹ cm⁻², a low detection limit of 4.0 nM (S/N=3), a wide linear range from 0.2 to 24.1 μM, good selectivity and anti-interference property.     

Nonenzymatic Electrochemical Glucose Sensor Based on Novel Copper Film

Novel copper (Cu) film composed of pillar‐like structure was synthesized on indium‐doped tin oxide (ITO) substrate by electrodeposition in acetate bath with proline as additive for the first time and used to construct nonenzymatic glucose sensor. When applied to detect glucose, such prepared electrode showed low operating potential (0.4 V), high sensitivity (699.4499 µA mM⁻¹ cm⁻²), and fast response time (<3 s) compared with other Cu‐based electrodes. In addition, the prepared electrode also offered good anti‐interference ability to ascorbic acid, uric acid and acetaminophen. Present study provides new insights into the control of Cu film morphology for sensor fabrication.     

Nonenzymatic Electrochemical Glucose Sensor Based on Pt Nanoparticles/Mesoporous Carbon Matrix

A nonenzymatic amperometric sensor for sensitive and selective detection of glucose has been constructed by using highly dispersed Pt nanoparticles supported onto mesoporous carbons (MCs). The Pt nanoparticles/mesoporous carbons (Pt/MCs) composites modified electrode displayed high electrocatalytic activity towards the oxidation of glucose. At an applied potential of 0.1 V, the Pt/MCs electrode has a linear dependence (R=0.996) in the glucose concentration up to 7.5 mM with a sensitivity of 8.52 mA M^?1 cm^?2. The Pt/MCs electrode has also shown highly resistant toward poisoning by chloride ions and without interference from the oxidation of common interfering species.