An electrochemical method for simultaneous detection and identification of Escherichia coli, Staphylococcus aureus and Salmonella choleraesuis using a glucose oxidase-peroxidase composite biosensor

Quantification of bacterial pollution by amperometric detection at 0.0 V of glucose consumption at a graphite-Teflon-glucose oxidase-peroxidase-ferrocene composite biosensor under flow injection conditions is reported. Using Escherichia coli as the model bacterium, the composition of the growing medium was optimized. A constant glucose concentration of 4.0 x 10(-4) M was added to the culture medium. The relative response to glucose, expressed as the ratio between the amperometric signal and the signal at incubation time t = 0 multiplied by 100, as a function of E. coli concentration, showed a typical behaviour. Limits of detection of 6.5 x 10(2) or 6.5 cfu mL(-1) were achieved after 3 or 7 h of incubation, respectively, with no pre-concentration step. The detection of bacteria did not affect the lifetime of the biosensor. The feasibility of the detection of Staphylococcus aureus and Salmonella choleraesuis throughout the glucose consumption measurement at the composite biosensor is also demonstrated. The capability of bacterial identification by evaluation of bacterial growth in the culture medium containing the antibiotics polymyxin B, vancomycin, erythromycin, bacitracin, chloramphenicol, tetracycline and ciprofloxacin, was investigated. Each micro-organism tested exhibited a different antibiotic susceptibility profile, thus suggesting the possibility of bacteria differentiation. A rapid methodology for screening of bacteria is proposed.     

Incorporation of horseradish peroxidase in a Kieselguhr membrane and the application to a mediator-free hydrogen peroxide sensor.

Horseradish peroxidase was incorporated in a kieselguhr membrane. The electron-transfer process of the enzyme was examined by cyclic voltammetry. It was observed that the electron-transfer reactivity of horseradish peroxidase was greatly enhanced, and that direct electrochemistry was accordingly feasible. Using the merits of the direct electron-transfer reactivity of horseradish peroxidase and its specific enzymatic catalysis towards hydrogen peroxide, an unmediated hydrogen peroxide biosensor was constructed. The calibration plot of this hydrogen peroxide sensor was linear in the range of 2.0 x 10(-6) mol/L - 6.5 x 10(-4) mol/L. The relative standard deviation was 4.1% for 6 successive determinations at a concentration of 1.0 x 10(-4) mol/L. The detection limit was 1.0 x 10(-6) mol/L.     

Synthesis of a novel chemiluminescent reagent for the determination of hydrogen peroxide in snow waters

7-(4,6-Dichloro-1,3,5-triazinylamino)-4-methylcoumarin (DTMC) was synthesized as a completely new chemiluminescent reagent, and with it a novel chemiluminescence method was developed for the determination of hydrogen peroxide in the absence of any added catalyst or co-oxidant. The chemiluminescence intensity of the DTMC-H(2)O(2) system could be enhanced by the addition of cation surfactants. The chemiluminescence intensity was directly proportional to the concentration of H(2)O(2) in the range 1.0 x 10(-7)-4.0x10(-4) mol l(-1), and the detection limit was 4.0 x 10(-8) mol l(-1). The relative S.D. was 4.9% for 1.0 x 10(-6) mol l(-1) of H(2)O(2) (n=10). The selectivity of this method was high, and most of the transition metal ions have no effect on the determination. The proposed method has been applied to the determination of trace amounts of hydrogen peroxide in snow water. A possible mechanism of the chemiluminescence reaction is also discussed.     

Potentiometric flow-injection determination of trace hydrogen peroxide based on its induced reaction in iron(III)-iron(II) potential buffer containing bromide and molybdenum(VI)

A rapid and highly sensitive potentiometric flow-injection method for the determination of trace hydrogen peroxide was developed by use of an Fe(III)-Fe(II) potential buffer solution containing bromide and Mo(VI). The analytical method was based on a linear relationship between a concentration of hydrogen peroxide and a largely transient potential change of an oxidation-reduction potential electrode due to bromine generated by the reaction of hydrogen peroxide with the potential buffer solution. The oxidation of bromide to bromine by hydrogen peroxide occurred very rapidly with the assistance of Mo(VI) when Fe(II) existed in the potential buffer solution. It was estimated by batchwise experiments that hydroxyl radical, OH., was generated by the reaction of hydrogen peroxide with Fe(II) as an intermediate, and subsequently oxidized bromide to bromine. In a flow system, analytical sensitivities to hydrogen peroxide obtained by the detection of the transient change of potential were enhanced about 75 fold compared with those obtained by using the potential change caused by the reaction of hydrogen peroxide with the potential buffer solution without bromide and Mo(VI). Sensitivities increased with decreasing concentration of the Fe(III)-Fe(II) buffer in the reagent solution. The detection limit (S/N = 3) of 4 x 10(-7) M (13.6 ppb) was achieved by using the 1 x 10(-4) M Fe(III)-Fe(II) buffer containing 0.4 M NaBr, 1.0 M H(2)SO(4) and 0.5% (NH(4))(6)Mo(7)O(24). Analytical throughput was approximately 40 h(-1) and the RSD (n = 6) was 0.6% for measurement of 4 x 10(-6) M hydrogen peroxide. The proposed method was applied to the determination of hydrogen peroxide in real rainwater samples, and was found to provide a good recovery for H(2)O(2) added to rainwater samples.     

Enhanced peroxidase activity of hemoglobin in a DNA membrane and its application to an unmediated hydrogen peroxide biosensor.

Hemoglobin can exhibit not only a direct electron transfer reacting after being entrapped in a DNA membrane, but also a greatly enhanced peroxidase activity toward the reduction of hydrogen peroxide. Based on the direct electrochemical property and nice enzymatic activity of the protein in a DNA membrane, a reagentless hydrogen peroxide biosensor was prepared. The peak current related to hydrogen peroxide was linearly proportional to its concentration in the range of 1.9 x 10(-6)-6.8 x 10(-4) mol L(-1). The detection limit was 1 x 10(-6) mol/L.     

Peroxidase-catalysed luminol chemiluminescence method for the determination of glutathione

A luminol chemiluminescence (CL) method was developed for the determination of glutathione (GSH). GSH was indirectly determined by measuring the amount of hydrogen peroxide formed during the Cu(II)-catalysed oxidation of GSH with oxygen. The amount of hydrogen peroxide formed was continuously measured using the Arthromyces ramosus peroxidase-catalysed luminol CL reaction. The CL intensities at maximum light emission were linearly correlated with the concentration of GSH over the range 7.5 x 10(-7)-3.0 x 10(-5) M. The detection limit for GSH was about 10 times better than that of the spectrophotometric method using Ellman reagent.     

Amperometric enzyme electrodes for the determination of l-glutamate

Electrodes for amperometric measurement of l-glutamate were prepared by immobilization of l-glutamate oxidase on an Immobilon-AV Affinity membrane and attachment to an oxygen/hydrogen peroxide sensor. The response of the hydrogen peroxide sensor was linear over the concentration range 5.0 x 10(-8)-5.0 x 10(-4)Ml-glutamate, with a limit of detection of 35nM. Attachment of a size-exclusion membrane (cut-off for molecular weight > 100) or of a hydrophobic oxygen membrane eliminated electro-oxidizable interferences, but the response was attenuated by a factor of 2-3. The response may be amplified 10-fold by co-immobilizing l-glutamate dehydrogenase with the l-glutamate oxidase. The electrode initially lost 25% of its activity but was then stable for more than 320 days and at least 200 assays. The electrode was successfully used to assay glutamate in a protein tablet and in several food products. A flow-injection system was assembled for the continuous assay of l-glutamate.     

Fluorescent quenching method for determination of trace hydrogen peroxide in rain water

A simple and sensitive fluorescent quenching method for the determination of trace hydrogen peroxide (H(2)O(2)) has been proposed to determine hydrogen peroxide in rain water sample. The method is based on the reaction of H(2)O(2) with 3,3'-diethyloxadicarbocyanine iodide (DI) to form a compound which has no fluorescence in acetate buffer solution (pH 3.09). The maximum emission wavelength of the system is located at 604 nm with excitation at 570 nm. Under the optimal conditions, the calibration graph was obtained between the quenched fluorescence intensity and hydrogen peroxide concentration in the range of 5.0 x 10(-7) to 9.0 x 10(-4) mol L(-1). The proposed method was applied to determine H(2)O(2) in rain water samples, and the result was satisfactory. The mechanism involved in the reaction was also studied.     

Borate-catalyzed reactions of hydrogen peroxide: kinetics and mechanism of the oxidation of organic sulfides by peroxoborates

The kinetics of the oxidation of substituted phenyl methyl sulfides by hydrogen peroxide in borate/boric acid buffers were investigated as a function of pH, total peroxide concentration, and total boron concentration. Second-order rate constants at 25 degrees C for the reaction of methyl 4-nitrophenyl sulfide and H(2)O(2), monoperoxoborate, HOOB(OH)(3) (-), or diperoxoborate, (HOO)(2)B(OH)(2) (-), are 8.29 x 10(-5), 1.51 x 10(-2) and 1.06 x 10(-2) M(-1) s(-1), respectively. Peroxoboric acid, HOOB(OH)(2), is unreactive. The Hammett rho values for the reactions of a range of substituted phenyl methyl sulfides and hydrogen peroxide, monoperoxoborate or diperoxoborate are -1.50 +/- 0.1, -0.65 +/- 0.07 and -0.48 (two points only), respectively. The rho values for the peroxoborates are of significantly lower magnitude than expected from their reactivity compared to other peroxides. Nevertheless the negative rho values indicate positive charge development on the sulfur atom in the transition state consistent with nucleophilic attack by the organic sulfides on the peroxoborates as with the other peroxides. The kinetic parameters, including the lack of reactivity of peroxoboric acid, are discussed in terms of the differences in the transition state of reactions involving peroxoboron species with respect to those of other peroxides.     

Homogenous electrogenerated chemiluminescence immunoassay for human immunoglobulin G using N-(aminobutyl)-N-ethylisoluminol as luminescence label at gold nanoparticles modified paraffin-impregnated graphite electrode

A homogeneous electrogenerated chemiluminescence (ECL) immunoassay for human immunoglobulin G (hIgG) has been developed using a N-(aminobutyl)-N-ethylisoluminol (ABEI) as luminescence label at gold nanoparticles modified paraffin-impregnated graphite electrode (PIGE). ECL emission was electrochemically generated from the ABEI-labeled anti-hIgG antibody and markedly increased in the presence of hIgG antigen due to forming a more rigid structure of the ABEI moiety. The concentration of hIgG antigen was determined by the increase of ECL intensity at a gold nanoparticles modified PIGE. It was found that the ECL intensity of ABEI in presence of hydrogen peroxide was dramatically enhanced at gold nanoparticles modified PIGE in neutral aqueous solution and the detection limit of ABEI was 2 x 10(-14)mol/L (S/N=3). The integral ECL intensity was linearly related to the concentration of hIgG antigen from 3.0 x 10(-11) to 1.0 x 10(-9)g/mL with a detection limit of 1 x 10(-11)g/mL (S/N=3). The relative standard deviation was 3.1% at 1.0 x 10(-10)g/mL (n=11). This work demonstrates that the enhancement of the sensitivity of ECL and ECL immunoassay at a nanoparticles modified electrode is a promising strategy.     

Evaluation of luminol-H(2)O(2)-KIO(4) chemiluminescence system and its application to hydrogen peroxide, glucose and ascorbic acid assays

A novel chemiluminescence (CL) system was evaluated for the determination of hydrogen peroxide, glucose and ascorbic acid based on hydrogen peroxide, which has a catalytic-cooxidative effect on the oxidation of luminol by KIO(4). Hydrogen peroxide can be directly determined by luminol-KIO(4)-H(2)O(2) CL system. The detection limit was 3.0x10(-8) mol l(-1) and the calibration graph was linear over the range of 2.0x10(-7)-6.0x10(-4) mol l(-1). The relative standard deviation of H(2)O(2) was 1.1% for 2.0x10(-6) mol l(-1) (N=11). Glucose was indirectly determined through measuring the H(2)O(2) generated by the oxidation of glucose in the presence of glucose oxidase at pH 7.6. The present method provides a source for H(2)O(2), which, in turn, coupled with the luminol-KIO(4)-H(2)O(2) CL reaction system. The CL was linearly correlated with glucose concentration of 0.6-110 mug ml(-1). The relative standard deviation was 2.1% for 10 mug ml(-1) (N=11). Detection limit of glucose was 0.08 mug ml(-1). Ascorbic acid was also indirectly determined by the suppression of luminol-KIO(4)-H(2)O(2) CL system. The calibration curve was linear over the range of 1.0x10(-7)-1.0x10(-5) mol l(-1) of ascorbic acid. The relative standard deviation was 1.0% for 8.0x10(-7) mol l(-1) (N=11). Detection limit of ascorbic acid was 6.0x10(-8) mol l(-1). These proposed methods have been applied to determine glucose, ascorbic acid in tablets and injection.     

Fabrication of herbicide biosensors based on the inhibition of enzyme activity that catalyzes the scavenging of hydrogen peroxide in a thylakoid membrane.

A novel herbicide biosensor with a thylakoid modified membrane electrode is presented. Thylakoid, isolated from spinach leaves, was entrapped in a membrane of poly (vinylalcohol) with the styrylpyridinium group (PVA-SbQ). The thylakoid membrane was fixed on the surface of a platinum electrode. It was found that the enzymes in thylakoid kept their activity for several months in the membrane. The oxidative current of hydrogen peroxide in a Tris-HCl buffer solution (pH 7.4) was detected at the modified electrode by a differential pulse voltammetric method. In the presence of herbicides, the oxidation current from the hydrogen peroxide decreased due to an inhibitor effect on the enzymes in thylakoid compared with that in the absence of the herbicides. The changes in the oxidation current at the electrode were proportional to the herbicide concentrations. The sensor could be used to detect herbicides in concentration ranges of 3 x 10(-9) - 1.5 x 10(-7) M for paraquat, 1 x 10(-8) - 3 x 10(-7) M for diuron, 4 x 10(-8) - 3 x 10(-6) M for prometryn, 5 x 10(-8) - 5 x 10(-6) M for atrazine and 1 x 10(-7) - 5 x 10(-6) M for ametryn, respectively. The enzyme activity on scavenging hydrogen peroxide in the modified PVA-SbQ membrane was examined.     

Chemiluminescence (CL) emission generated during oxidation of pyrogallol and its application in analytical chemistry. I. Effect of oxidant compound

An investigation of chemiluminescence (CL)-emission generated by the oxidation of pyrogallol using various inorganic oxidant compounds is reported in this F.I.A.-merging zone application. The oxidant compounds that showed measurable CL-emission were permanganate, periodate, hypochlorite anions, cerium(IV) and hydrogen peroxide. The different oxidant compounds showed CL-emissions at different pH-ranges. The CL-emission was limited by the inner filter effect and this was more intense for oxidants of selective oxidation. Kinetic effects were also found in the case of oxidation by permanganate. Plots of CL-emission against pH give evidence of speciation and or deactivation mechanism effects. The analytical parameters for the determination of the oxidants are given. Sensitivities of 895 600, 19 500, 33 723, 10 680 and 56 703 mV M(-1) were found for the determination of permanganate, cerium(IV), periodate, hypochlorite and hydrogen peroxide, respectively. The calibration curves of the oxidant determination were generally S-shaped; the S-shaped calibration curve of periodate was closer to a straight line relationship while that of hypochlorite was almost a straight line; detection limits in the range of 10(-4) M oxidant concentration were found for nearly all oxidants. The analytical parameters for determination of pyrogallol by the CL-emission generated through oxidation by the different oxidants at optimum conditions were 1.16x10(6) mV M(-1) for permanganate; 0.086x10(6) mV M(-1) for cerium(IV); 0.91x10(6) mV M(-1) for periodate; 0.012x10(6) mV M(-1) for hypochlorite; and 0.25x10(6) mV M(-1) for hydrogen peroxide. The detection limit was 1.0x10(-4) M. The nearly straight-line relationship (initial part of the plot) for CL-emission with oxidant concentration gives an indication that the CL-reaction of pyrogallol oxidation by hypochlorite proceeds through a process that involves energy transfer while the pronounced S-shaped curve produced by permanganate gives the indication that the reaction proceeds through a process that does not involve energy transfer according to the mathematical model of CL-emission that controls the F.I.A.-merging zone technique of the flow apparatus used in this work. The sequence of completeness of the oxidation process by each oxidant was MnO(4)(-)>H(2)O(2)>IO(4)(-)>OCl(-); the stoichiometric quantity of the oxidant per pyrogallol molecule for the rapid part of the overall oxidation by each different oxidant was attempted; this is an index-value of the oxidation state of the fluorescent excited molecule. Finally, the impact of the above findings for further analytical applications is discussed.     

Stopped-flow spectrophotometric determination of hydrogen peroxide with hemoglobin as catalyst

A rapid and sensitive method was proposed for the determination of hydrogen peroxide based on the catalytic effect of hemoglobin using o-phenylenediamine as the substrate. Stopped-flow spectrophotometric method was used to study the kinetic behavior of the oxidation reaction. The catalytic effectiveness of hemoglobin was compared with other four kinds of catalysts. The initial rate of the formation of the reaction product 2,3-diaminophenazine at the wavelength of 425 nm was monitored, permitting a detection limit of 9.2x10(-9) mol/l H(2)O(2). A linear calibration graph was obtained over the H(2)O(2) concentration range 5.0x10(-8)-3.5x10(-6) mol/l, and the relative standard deviation at a H(2)O(2) concentration of 5.0x10(-7) mol/l was 2.08%. Satisfied results were obtained in the determination of H(2)O(2) in real samples by this method.     

Aluminum electrode modified with manganese hexacyanoferrate as a chemical sensor for hydrogen peroxide

A chemically modified electrode was fabricated based on manganese hexacyanoferrate (MnHCF) film. The MnHCF was used as a modifier immobilized onto an aluminum electrode. Stability of the electroactive film formed on the Al electrode surface indicated that MnHCF is a suitable material for the preparation of modified electrodes. The analytical applicability of the modified electrode for the determination of hydrogen peroxide was examined. A linear response in concentration range of 6.0x10(-7)-7.4x10(-3) M (r=0.9997) was obtained with detection limit of 2.0x10(-7) M for the determination of hydrogen peroxide. The modified electrode exhibited a good selectivity for H(2)O(2) in real samples. The mentioned electrode has advantages of being highly stable, sensitive, inexpensive, ease of construction and use.     

氮、铁共掺杂碳纳米粒子的制备及在过氧化氢和葡萄糖检测中的应用

以L-酒石酸和一水柠檬酸为混合碳源,以乙二胺为氮源和聚合试剂,并添加六水三氯化铁,通过一锅溶剂热法合成了氮、铁共掺杂碳纳米粒子(N/Fe-CNPs),采用制备的N/Fe-CNPs模拟过氧化物酶催化过氧化氢(H₂O₂)氧化3,3',5,5'-四甲基 产生可溶性的蓝色产物,联合葡萄糖氧化酶建立了测定H₂O₂和葡萄糖含量的新方法。 结果显示:H₂O₂及葡萄糖的浓度与反应体系的吸光度呈良好的线性关系,H₂O₂的线性范围为0.2~20 μmol/L,葡萄糖的线性范围为0.1~1.0及1.0~80 μmol/L,最低检出限分别可达42.5和76.1 nmol/L。     

A simplified enzyme-based fiber optic sensor for hydrogen peroxide and oxidase substrates

A simplified enzyme-based fiber optic sensor system has been developed for selective determination of hydrogen peroxide. Horseradish peroxidase (HRP) is immobilized on bovine albumin matrix with glutaraldehyde. A new fluorimetric substrate, thiamine is used to indicate the sensing process. Under optimized condition the measuring range of sensor is up to 1 x 10(-4)M hydrogen peroxide with a limit of detection of 5 x 10(-7)M in a 5 min response period. It can be easily incorporated in multienzyme sensors for biochemical substances which produce hydrogen peroxide under catalytic oxidation by their oxidase. This possibility has been tested for the determination of uric acid, D-amino acid, L-amino acid, glucose cholesterol, choline and acetylcholine, respectively, using a membrane with co-immobilized oxidase and horseradish peroxidase.     

Construction and analytical application of a biosensor based on stearic acid-graphite powder modified with sweet potato tissue in organic solvents

A biosensor based on stearic acid-graphite powder modified with sweet potato (Ipomoea batatas (L.) Lam.) tissue as peroxidase source was constructed and applied in organic solvents. Several parameters were studied to evaluate the performance of this biosensor such as stearic acid-graphite powder and tissue composition, type and concentration of supporting electrolyte, organic solvents, water/organic solvent ratio (% v/v) and hydrogen peroxide concentration. After selection of the best conditions, the biosensor was applied for the determination of hydroquinone in cosmetic creams in methanol. At the peroxidase electrode hydroquinone is oxidized in the presence of hydrogen peroxide and the radical formed was reduced back electrochemically at -180 mV vs Ag/AgCl (3.0 mol L(-1) KCl). The reduction current obtained was proportional to the concentration of hydroquinone from 6.2 x 10(-5) to 1.5 x 10(-3) mol L(-1) (r = 0.9990) with a detection limit of 8.5 x 10(-6) mol L(-1). The recovery of hydroquinone from two samples ranged from 98.8 to 104.1% and an RSD lower than 1.0% for a solution containing 7.3 x 10(-4) mol L(-1) hydroquinone and 1.0 x 10(-3) mol L(-1) hydrogen peroxide in 0.10 mol L(-1) tetrabutylammonium bromide methanol-phosphate buffer solution (95:5% v/v) (n = 10) was obtained.     

Gas-sensing internal enzyme fiber optic biosensor for hydrogen peroxide

Feasibility is demonstrated for a novel gas-sensing, internal enzyme biosensing scheme for the selective measurement of hydrogen peroxide. Two horseradish peroxidase catalysed reactions are evaluated for the detection of hydrogen peroxide as it crosses a microporous Teflon membrane at 37 degrees C. The rate at which hydrogen peroxide crosses the membrane is determined by either a fluorescence or chemiluminescence measurement and this rate is related to the concentration of hydrogen peroxide in the sample solution. Detection limits of 0.7 mM and 10 muM are estimated for the fluorescence and chemiluminescence methods, respectively. Selectivity is demonstrated for hydrogen peroxide over ascorbic acid, uric acid and tyrosine.     

Selective and sensitive fluorometric determinations of cobalt(II) and hydrogen peroxide with fluorescein-hydrazide

Fluorophotometric determinations of cobalt(II) and hydrogen peroxide were investigated by using the fluorescence reaction between fluorescein-hydrazide (fl-NHNH(2)), and/or hydrogen peroxide, cobalt(II), respectively. The calibration graphs were liner in the range of 0-6.0 ng cobalt(II) and 0-1000 ng hydrogen peroxide per 10 ml at an emission wavelength (E(m)) of 530 nm with an exicitation wavelength (E(x)) of 508 nm, respectively. These proposed methods were selective and simple, and the effect of foreign ions was negligible in comparison with conventional reported methods such as nitroso R,4-(2-pyridylazo)resorcinol(PAR), alizarin, pyridine-2-aldehyde-2-pyridinehydrazone, stilbazo-cobalt(II), etc.