A fast,highly selective and sensitive dansyl-based fluorescent sensor for copper (II) ions and its imaging application in living cells

Since the copper ions (Cu²⁺) play a fatal role in many foundational physiological processes, it is important to develop a simple, highly sensitive and selective sensor for Cu²⁺ detection in living systems. Herein, an intramolecular charge transfer (ICT) and dansyl-based fluorescent chemosensor 1 was designed, synthesized and characterized for the sensitive and selective quantification of Cu²⁺. It exhibited remarkable fluorescence quenching upon addition of Cu²⁺ over other selected metal ions, attributed to the complex formation between 1 and Cu²⁺ with the association constant 6.7 × 10⁵ M^?1. The sensor 1 showed a fast and linear response towards Cu²⁺ in the concentration range from 0 to 12.5 × 10^?6 mol L^?1 with the detection limit of 2.5 × 10^?7 mol L^?1. This detection could be carried out in a wide pH range of 5.0–14. Furthermore, sensor 1 can be used for detecting Cu²⁺ in living cells.     

Toward a highly sensitive and selective indole-rhodamine-based light-up probe for Hg2+ and its application in living cells

We herein designed and synthesized a light-up fluorescent probe L1 for Hg²⁺ species, which is based on indole derivative and Rhodamine fluorophore. The new probe can show a linear response to Hg²⁺ with high sensitivity and selectivity. As the Hg²⁺ concentration changed from 0 to 450 μM, the fluorescence intensity of L1 at 575 nm changed from 50 to 6181 (～120-fold). The detection limit of the probe was 5.0 × 10^?8 M. Besides, we have successfully applied L1 to monitor Hg²⁺ species in living MCF-7 cells by way of fluorescence imaging.     

A sensitive tetraphenylethene-based fluorescent probe for Zn2+ ion involving ESIPT and CHEF processes

A new tetraphenylethene-based fluorescent probe 2-(quinolin-8-yliminomethyl)-4-triphenylvinyl-phenol (HL) for detecting Zn²⁺ ion through the excited state intramolecular proton transfer (ESIPT) and chelation enhanced fluorescence (CHEF) processes has been designed and synthesized. The results show that HL emits relatively strong blue fluorescence at 460 nm without Zn²⁺ ion, however, probe HL displays highly pink fluorescent emission at 600 nm when adding Zn²⁺ ion. The fluorescent emission of HL appears an extremely large Stokes shift, which effectively reduces the interference of background signal. The limit of detection of HL for Zn²⁺ ion can reach to 9.0 × 10^–8 M.     

A Schiff base fluorescence probe for highly selective turn-on recognition of Zn2+

A simple Schiff base CTS, synthesized between 2-hydroxy-1-naphthaldehyde and 2-benzylthio-ethanamine, was found to be a good turn-on fluorescence probe for the detection of Zn²⁺, due to the restriction of the rotation of the bond between CN and naphthalene ring and/or the blocking of the photo-induced electron transfer (PET) mechanism of the nitrogen atom to naphthalene ring. Excellent selectivity for Zn²⁺ was evidenced, over many other competing ions, including Fe³⁺, Cr³⁺, Ni²⁺, Co²⁺, Fe²⁺,Mn²⁺, Ca²⁺, Hg²⁺, Pb²⁺, Cu²⁺, Mg²⁺, Ba²⁺, Cd²⁺, Ag⁺, Li⁺, K⁺, and Na⁺, in EtOH/HEPES buffer (95:5, v/v, pH = 7.4). It was noteworthy that Cd²⁺ had no interference with Zn²⁺. The stoichiometric complex of CTS-Zn²⁺ was determined to be 2:1 for CTS and Zn²⁺ in molar, based on the Job plot and single crystal X-ray diffraction data. The binding constant of the complex was 85.7 M^?2 with a detection limit of 5.03 × 10^?7 M. The fluorescence bio-imaging capability of CTS to detect Zn²⁺ in live cells was also studied. These results indicated that CTS could serve as a favorable probe for Zn²⁺.     

A benzothizole-based fluorescent probe for Hg2+ recognition utilizing ESIPT coupled AIE characteristics

A new benzothizole-based fluorescent probe 1 for Hg²⁺ recognition utilizing “ESIPT+AIE” strategy has been developed. In THF/H₂O (1:1, v/v, PBS 20 mM, pH = 8.5) mixed solution, probe 1 displays rapid fluorescence responses to Hg²⁺ ions with high selectivity and sensitivity through Hg²⁺-triggered releasing of a compound possessing “ESIPT+AIE” characteristics. Cell imaging investigations indicate that probe 1 is cell permeable with low toxicity to MCF-7 cells, and applicable to detect Hg²⁺ ions in living MCF-7 cells.     

A fluorescent probe for copper and hypochlorite based on rhodamine hydrazide framework

A rhodamine derivative (1) was synthesized as a fluorescence turn-on probe for copper (Cu²⁺) and hypochlorite (ClO^?). The probe gave a fluorescence turn-on change at 587 nm with a color change from colorless to pink in the presence of Cu²⁺ or ClO^? ions in aqueous solution. It was found that the Cu²⁺ ion bound to 1 in a 1:1 stoichiometry and induced a spirolactam ring opening of the rhodamine moiety leading to a fluorescence turn-on, confirmed by Job’s plot, ESI-Mass, and ¹H NMR analyses. In the presence of ClO^? ion, probe 1 underwent a hypochlorite-mediated oxidation and hydrolysis to produce a ring-opened rhodamine B with a fluorescence enhancement. However, these changes were not monitored in case of other metal ions, anions, and reactive redox species. In addition, probe 1 can readily react with the ClO^? to provide a distinct fluorescence enhancement along with a pink color even in the presence of various competitive species.     

Quinoline-based highly selective and sensitive fluorescent probe specific for Cd2+ detection in mixed aqueous media

Quinoline-based fluorescent probe as a recognition unit was designed and synthesized in this study. The probe R1 displayed excellent selectivity and sensitivity for cadmium ions (Cd²⁺) over a wide range of metal ions in acetonitrile-water (MeCN-H₂O) mixed solution. In order to better understand the recognition mechanism between probe and Cd²⁺, the density functional theory calculations were performed. Finally, the colorimetric experiment result was observed and conveniently monitored by the naked eye, and a visual detection limit of 4 × 10^?6 mol L^?1 was achieved. These experimental results indicated the promising potential of the probe to detect Cd²⁺ in biological system. Furthermore, the probe R1 was successfully used for the highly sensitive detection of Cd²⁺ in living cells.     

A borondipyrrolemethene-based turn-on fluorescent probe for silver ion with high sensitivity and selectivity and its application in water samples and living cells

A borondipyrrolemethene-based compound (1) is synthesized and used as a “turn-on” fluorescent probe for silver ions (Ag⁺). The probe displays highly sensitive fluorescence response toward Ag⁺ with a 40-fold fluorescence enhancement when 60 μM of Ag⁺ is added. The fluorescence intensity of the probe is linearly dependent on Ag⁺ concentration ranging from 0.05 to 60 μM. And the detection limit (LOD) can reach 0.02 μM, which complies with the standard of World Health Organization (WHO) for drinking water (0.9 μM). Moreover, the probe shows remarkable selectivity for Ag⁺ over other metal ions. Furthermore, the response behavior of 1 toward Ag⁺ is pH independent in the neutral range from 6.0 to 8.0. The response of 1 toward Ag⁺ is fast (response time is less than 2 min) and reversible chemically. What’s more, the sensing mechanism of probe 1 toward Ag⁺ is verified by mass spectra (MS) and density functional theory (DFT) calculations. In particular, the probe is applied for detection of Ag⁺ in water samples and living cells successfully.     

A pyrene-based dual chemosensor for colorimetric detection of Cu2+ and fluorescent detection of Fe3+

A pyrene based chemosensor was designed and synthesized. The pyrene fluorophore was connected with a pyridine unit through a Schiff base structure to give the sensor (L). L was tested with a variety of metal ions and exhibited high colorimetric selectivities for Cu²⁺ and Fe³⁺ over other ions. Upon binding with Cu²⁺ or Fe³⁺, L showed an obvious optical color change from colorless to pink for Cu²⁺ or orange for Fe³⁺ over a wide pH range from 3 to 12. Moreover, the fluorescence of L at 370 nm decreased sharply after bonding with Fe³⁺, while other metal ions including Cu²⁺ had no apparent interference. Thus, using such single chemosensor, Cu²⁺ and Fe³⁺ can be detected independently with high selectivity and sensitivity. The limits of detection toward Cu²⁺ and Fe³⁺ were 8.5 and 2.0 μM, respectively. DFT calculation results also proved the formation of stable coordination complexes and the phenomenon of fluorescence quenching by Fe³⁺. Furthermore, L was also successfully used as a bioimaging reagent for detection of Fe³⁺ in living cells.     

Synthesis and evaluation of two novel rhodamine-based fluorescence probes for specific recognition of Fec+ ion

Two low cytotoxic fluorescence probes Rb1 and Rb2 detecting Fe³⁺ were synthesized and evaluated. Rb1 and Rb2 exhibited an excellent selectivity to Fe³⁺, which was not disturbed by Ag⁺, Li⁺, K⁺, Na⁺, NH₄⁺, Fe²⁺, Pb²⁺, Ba²⁺, Cd²⁺, Ni²⁺, Co²⁺, Mn²⁺, Zn²⁺, Mg²⁺, Hg²⁺, Ca²⁺, Cu²⁺, Ce³⁺, AcO^?, Br^?, Cl^?, HPO₄^2?, HSO₃^?, I^?, NO₃^?, S₂O₃^2?, SO₃^2? and SO₄^2? ions. The detection limits were 1.87 × 10^?7 M for Rb1 and 5.60 × 10^?7 M for Rb2, respectively. 1:1 stoichiometry and 1:2 stoichiometry were the most likely recognition mode of Rb1 or Rb2 towards Fe³⁺, and the corresponding OFF–ON fluorescence mechanisms of Rb1 and Rb2 were proposed.     

Coumarin-based fluorescent chemosensor for the selective quantification of Zn2+ and AcO− in an aqueous solution and living cells

In this work, we report a novel fluorescence chemosensor HM based on the coumarin fluorophore for the quantification of Zn²⁺ and AcO^?. HM specifically binds to Zn²⁺ in the presence of other competing cations, and evident changes in UV–vis and fluorescence spectra in HEPES buffer are noticed. The in situ generated HM-Zn²⁺ complex solution exhibit a high selectivity toward AcO^? via Zn²⁺ displacement approach. The detection limits of HM for Zn²⁺ and HM-Zn²⁺ for AcO^? were estimated to be 7.24 × 10^?8 M and 9.41 × 10^?8 M, respectively. HM and the resultant complex HM-Zn²⁺ exhibit low cytotoxicity and cell-membrane permeability, which makes them capable of Zn²⁺ and AcO^? imaging in living Hep G2 cells. A B3LYP/6-31G(d,p) basis set was employed for optimization of HM and HM-Zn²⁺ complex.     

Highly sensitive fluorescent sensor targeting CuCl2 based on thiophene attached anthracene compound (TA)

A novel thiophene attached anthracene (TA) based fluorescent compound was designed and synthesized. The TA showed a high quantum yield (Qy = 0.34) in regard to fluorescence. We applied this TA compound to detect specific metal compound and found that it could identify CuCl₂ from other metals through dramatic fluorescence change at λ_max = 460 nm. It showed strong quenching fluorescence property with CuCl₂ while with other metal compounds it exhibited strong blue fluorescence emission. UV/Vis absorption spectroscopy clearly demonstrated that the quenching property of TA at λ_max = 460 nm was due to overlapping of the fluorescence peak of TA at λ_max = 460 nm and the absorption band of CuCl₂ (from 190 nm to 525 nm). Binding constant (K′), which was 0.0895 mM^?2, indicated a complexation ratio between TA and CuCl₂ as 1:2 and this interaction induced quenching property.     

A simple highly sensitive and selective turn-on fluorescent chemosensor for the recognition of Pb2+

A simple highly sensitive and selective turn-on fluorescent chemosensor L based on bis-Schiff-base for Pb²⁺ ions was synthesized and characterized by spectroscopic techniques. L having high binding affinity towards Pb²⁺ ions of 2.10 × 10⁴ M^?1 selectively detects Pb²⁺ ions with almost no interference among various competitive ions by a 11-fold fluorescent enhancement in CH₃CN/H₂O (95:5, v/v) solution over a wide pH range. Moreover, sensor L displayed a lower detection limit of 3.80 × 10^?7 M, which is low enough for sensing sub-millimolar concentration of Pb²⁺ encountered practically.     

A novel colorimetric chemosensor based on quinoline for the sequential detection of Fe3+ and PPi in aqueous solution

A novel quinoline-functionalized Schiff-base derivative PY was designed and synthesized. Sensor PY displayed highly selective and sensitive fluorescence enhancement and naked-eye color change to Fe³⁺ in the presence of other competing cations. The mechanisms have been supported by Job’s plot evaluation, FT-MS and theoretical calculations. The in situ generated PY-Fe³⁺ complex solution exhibited a high selectivity toward PPi via Fe³⁺ displacement approach. The detection limits of sensor PY to Fe³⁺ and PY-Fe³⁺ complex to PPi were estimated to be 4.24 × 10^?8 M and 8.18 × 10^?8 M, respectively. This successive recognition feature of sensor PY makes it has a potential utility for Fe³⁺ and PPi detection in aqueous solution. A B3LYP/6-31G(d,p) basis set was employed for optimization of PY and PY-Fe³⁺ complex.     

Anthroneamine based chromofluorogenic probes for Hg2+ detection in aqueous solution

Anthroneamine derivatives 1–3 (H₂O:DMSO; 9:1, HEPES buffer, pH 7.0 ± 0.1) undergo highly selective fluorescence quenching with Hg²⁺. The observed linear fluorescence intensity change allows the quantitative detection of Hg²⁺ between 200 nM/40 ppb—12 μM/2.4 ppm even in the presence of interfering metal ions viz. Na⁺, K⁺, Mg²⁺, Ca²⁺, Ba²⁺, Cr³⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Ag⁺, Cd²⁺, Pb²⁺. Probes 1–3 and their Hg²⁺ complexes also show the broad pH resistance for their practical applicability.     

Fused bis[2-(2′-hydroxyphenyl)benzoxazole] derivatives for improved fluoride sensing: The impact of regiochemistry and competitive hydrogen bonding

Development of fluorescent chemical sensors for fluoride is important due to increased use of fluoride in environment. A fused bis[2-(2′-hydroxyphenyl)benzoxazole] 5, which is capable of giving ESIPT emission, is found to be a useful fluorescent sensor for fluoride detection. Upon binding to fluoride, bis(HBO) 5 shows a large spectral shift in both fluorescence (from ～490 nm to ～440 nm) and absorption (from 353 nm to 392 nm). In comparison with the isomeric 4, bis(HBO) 5 dramatically improves the sensitivity in fluoride binding (by an order of magnitude), revealing a large impact of regiochemistry on the sensor performance. ¹H NMR has been used to study the fluoride binding, and to correlate the intramolecular hydrogen bonding with the fluoride response. Sensitivity of 5 towards fluoride is as low as 10^?5 M. Bis(HBO) 5 also showed excellent selectivity towards fluoride while being silent to other anions (Cl^?, Br^?, HS^? and PO₄^3?), thus making 5 a potentially useful probe.     

An ESIPT-based fluorescent probe for sensitive and selective detection of Cys/Hcy over GSH with a red emission and a large Stokes shift

An ESIPT-based fluorescent probe (Probe 1) using acrylate as recognition group for the selective and sensitive detection of cysteine/homocysteine (Cys/Hcy) has been developed. In the presence of Cys/Hcy, this probe was transformed into 1,3-bis(bispyridin-2ylimino)isoindolin-4-ol (dye 4) which displayed red fluorescence with a large Stokes shift (217 nm) when excited. The detection limits are as low as 5.4 nM and 7.0 nM for Cys and Hcy respectively (based on S/N = 3). Importantly, this probe has been successfully demonstrated for the detection of intracellular Cys/Hcy in living cells.     

Fluorescence “turn-on” chemosensor for the selective detection of zinc ion based on Schiff-base derivative

N,N′-phenylenebis(salicylideaminato) (L) has been used to detect trace amounts of zinc ion in acetonitrile–water solution by fluorescence spectroscopy. The fluorescent probe undergoes fluorescent emission intensity enhancement upon binding to zinc ions in MeCN/H₂O (1:1, v/v) solution. The fluorescence enhancement of L is attributed to the 1:1 complex formation between L and Zn(II), which has been utilized as the basis for selective detection of Zn(II). The linear response range for Zn(II) covers a concentration range of 1.6 × 10^?7 to 1.0 × 10^?5 mol/L, and the detection limit is 1.5 × 10^?7 mol/L. The fluorescent probe exhibits high selectivity over other common metal ions, and the proposed fluorescent sensor was applied to determine zinc in water samples and waste water.     

Signaling of chloramine: a fluorescent probe for trichloroisocyanuric acid based on deoximation of a coumarin oxime

A new chloramine signaling probe, based on a coumarin oxime, was developed. The coumarin oxime 1 exhibited efficient off–on type fluorescent signaling behavior toward trichloroisocyanuric acid (TCCA) in an aqueous acetonitrile solution. The signaling is due to the TCCA-assisted transformation of the oxime function to its carbonyl analogue. The presence of common metal ions and anions did not interfere with the TCCA signaling of this probe. Probe 1 was found to be useful for the sensitive determination of the concentration of the practical oxidant TCCA in an aqueous environment, with a detection limit of 7.58 × 10⁻⁷ M.     

A lysosomal targeting fluorescent probe and its zinc imaging in SH-SY5Y human neuroblastoma cells

A fluorescent probe based PET mechanism was designed, and the probe could image endogenous release of Zn²⁺ upon H₂O₂ stimulation in SH-SY5Y cells.