Conformational interconversions in [2]catenanes containing a wide rigid bis(p-benzyl)methyl spacer

The conformational interconversions of four [2]catenanes (1-4) containing a dibenzo-34-crown-10 ether (BPP34C10) interlocked with rings containing two 4,4'-dipyridiniums tethered by 1,3-bis(ethyloxy)phenyl and bis(p-benzyl)methyl spacers have been studied by VT 1H NMR spectroscopy. Symmetrically placed blocking groups on thickened tethers enabled either pathway for circumrotation of the BPP34C10 between isoenergetic sites to be blocked. On the basis of chemical shifts of the BPP34C10, its internal p-hydroquinone forms pi-pi-stacking interactions with only one 4,4'-dipyridinium ring at a time. The activation barrier for migration along either open tether was approximately 11.5 kcal/mol. This study demonstrates an ability to select the pathway for conformational interconversions in these [2]catenanes containing the rigid bis(p-benzyl)methyl tether and the lowering the barrier for interconversion through destabilization of the ground state structures.     

Inclusion [2]complexes based on the cryptand/diquat recognition motif

Seven diquat-based inclusion [2]complexes were studied by proton NMR spectroscopy, electrospray ionization mass spectrometry, and X-ray analysis. The hosts used in these inclusion [2]complexes are bis(5-hydroxymethyl-1,3-phenylene)-32-crown-10, a bis(m-phenylene)-26-crown-8-based cryptand, and five bis(m-phenylene)-32-crown-10-based cryptands. Bis(m-phenylene)-32-crown-10-based cryptands have been proved to be able to complex diquat much more strongly than bis(m-phenylene)-32-crown-10 itself and one containing a pyridyl moiety has one of the highest K_a values reported to date. These hosts form 1:1 complexes with diquat in solution and in the solid state. It was found that the improved binding from bis(m-phenylene)-32-crown-10 to bis(5-hydroxymethyl-1,3-phenylene)-32-crown-10 was due to a supramolecular cryptand structure formed by chelation of the two terminal OH moieties of bis(5-hydroxymethyl-1,3-phenylene)-32-crown-10 with a water molecule as a hydrogen-bonding bridge.     

An Isomer Specific,Highly Selective Fluorescent Chemosensor for K+ from a Bis‐Naphtho‐15‐Crown‐5 Derivative

Three isomeric series of bis(crown ether)s have been synthesized by condensation of the appropriate formylnaphthocrown with 1,4‐phenylenediacetonitrile. The interaction of these ligands with K⁺ and Na⁺ has been investigated by UV and fluorescence spectroscopic techniques. Among them the bis(crown ether) 2a exhibits excellent K⁺‐selectivity over Na⁺ and a dramatic increase in the fluorescence intensity of chromophores.     

Synthesis,characterization, and comparison of properties of new fluorinated poly(arylene ether)s containing phthalimidine moiety in the main chain

Four new poly(arylene ether)s have been prepared by the reaction of N‐phenyl‐3,3‐bis(4‐hydroxyphenyl)phthalimidine (PA) with four different perfluoroalkylated monomers namely 1,3‐bis(4′‐fluoro‐3′‐trifluoromethyl benzyl) benzene, 4,4′‐bis(4′‐fluoro‐3′‐trifluoromethyl benzyl) biphenyl, 2,6‐bis(4′‐fluoro‐3′‐trifluoromethyl benzyl) pyridine, and 2,5‐bis(4′‐fluoro‐3′‐trifluoromethyl benzyl) thiophene. The poly(arylene ether)s were characterized by different spectroscopic, thermal, mechanical, and electrical techniques. The poly(arylene ether) containing quadriphenyl unit in the main chain showed very high glass transition temperature of 291°C and outstanding thermal stability upto 556°C for 10% weight loss under a 4:1 nitrogen:oxygen mixture. The polymers were soluble in a wide range of organic solvents. Transparent thin films of these polymers exhibited tensile strengths upto 75 MPa and elongation at break upto 32%. The films of these polymers showed low water absorption of 0.26%. Copyright © 2009 John Wiley & Sons, Ltd.     

Soluble poly (aryl ether)s containing naphthalene pendant group: synthesis, characterization and electrospinning

Two soluble poly(aryl ether)s were prepared conveniently from bis(4-hydroxy-3,5-dimethylphenyl)naphthylmethane (1) and two activated dihalide monomers including 4,4′-difluorobenzophenone and bis(4-chlorophenyl)sulfone by an aromatic nucleophilic substitution. The bulky naphthyl and tetramethyl pendant groups in the polymer backbone could decrease the packing density and intermolecular interaction of macromolecular chain and make these poly(aryl ether)s show a good solubility. They all could be dissolved in CHCl₃, CH₂Cl₂ and tetrahydrofuran at room temperature with a dissolvability of more than 10 wt%. Furthermore, the poly(aryl ether)s could be electrospun into microfiber (10–15 μm) with nanopores (200–350 nm). The morphologies of these fibers were characterized by scanning electron microscopy. The porous morphology on the fiber surface was also investigated using scanning probe microscope.     

Synthesis and properties of new adamantane‐based poly(ether imide)s

A new adamantane‐based bis(ether anhydride), 2,2‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]adamantane dianhydride, was prepared in three steps starting from nitrodisplacement of 4‐nitrophthalonitrile with the potassium phenolate of 2,2‐bis(4‐hydroxyphenyl)adamantane. A series of adamantane‐containing poly(ether imide)s were prepared from the adamantane‐based bis(ether anhydride) and aromatic diamines by a conventional two‐stage synthesis in which the poly(ether amic acid)s obtained in the first stage were heated stage‐by‐stage at 150–270°C to give the poly(ether imide)s. The intermediate poly(ether amic acid)s had inherent viscosities between 0.56 and 1.92 dL/g. Except for those from p‐phenylenediamine, m‐phenylenediamine, and benzidine, all the poly(ether amic acid) films could be thermally converted into transparent, flexible, and tough poly(ether imide) films. All the poly(ether imide)s showed limited solubility in organic solvents, although they were amorphous in nature as evidenced by X‐ray diffractograms. Glass transition temperatures of these poly(ether imide)s were recorded in the range of 242–317°C by differential scanning calorimetry and of 270–322°C by dynamic mechanical analysis. They exhibited high resistance to thermal degrdation, with 10% weight loss temperatures being recorded between 514–538°C in nitrogen and 511–527°C in air. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1619–1628, 1999     

Design of ionic liquids as a medium for the Grignard reaction

Design of novel phosphonium ionic liquids that are compatible with Grignard reagents have been investigated; several types of phosphonium salts that have an alkyl ether moiety have been synthesized and their capability evaluated as solvents for Grignard reagents. It has been established that even basic aliphatic Grignard reagent-mediated reactions are possible when methoxyethyl(tri-n-butyl)phosphonium bis(trifluoromethanesulfonyl)imide is used as the solvent.     

Synthesis of new proton-ionizable and neutral macrocyclic,macrobicyclic and macrotricyclic crown compounds containing dibenzo-16-crown-5 units

Fifteen new macrocyclic, macrobicyclic and macrotricyclic crown ether compounds with sym-dibenzo-16-crown-5 units have been prepared. The series includes macrocyclic polyether and bis(crown ether) compounds with proton-ionizable carboxylic or phosphonic acid monoethyl ester groups and bis(crown ether) and macrotricyclic polyether compounds with two sym-dibenzo-16-crown-5 units linked by amide, diamide, or diester functions.     

A triptycene-based bis(crown ether) host: complexation with both paraquat derivatives and dibenzylammonium salts

[reaction: see text] A novel triptycene-based bis(crown ether) host (1) incorporating two dibenzo-24-crown-8 ether moieties has been synthesized. It can form not only a new bis[2]pseudorotaxane with dibenzylammonium salts but also stable clip-shaped complexes with paraquat derivatives. Moreover, the complexation process between 1 and the two classes of guests can be chemically controlled.     

高效液相色谱-串联质谱法同时测定肉类罐头中双酚-二缩水甘油醚

建立了同时测定肉类罐头中双酚A-二缩水甘油醚(BADGE)、双酚F-二缩水甘油醚(BFDGE)及其衍生物双酚A-(2,3-二羟丙基)甘油醚(BADGE•H2O)、双酚A-双(2,3-二羟丙基)醚(BADGE•2H2O)、双酚A-(3-氯-2-羟丙基)(2,3-二羟丙基)醚(BADGE•H2O•HCl)、双酚A-(3-氯-2-羟丙基)甘油醚(BADGE•HCl)、双酚A-双(3-氯-2-羟丙基)醚(BADGE•2HCl)、双酚F-双(2,3-二羟丙基)醚(BFDGE•2H2O)、双酚F-双(3-氯-2-羟丙基)醚(BFDGE•2HCl)9种环境激素的高效液相色谱-串联质谱分析方法。样品经叔丁基甲醚提取,HLB固相萃取小柱净化,C18色谱柱分离,用5 mmol/L醋酸铵溶液(含0.1%甲酸)与甲醇为流动相梯度洗脱,质谱多反应监测(MRM)模式检测,基质标准校正,外标法定量。结果表明,这9种化合物在10.0～2000.0 μg/L范围内线性关系良好;定量限(以信噪比≥10计)为10.0 μg/kg;在高、中、低3个加标水平下9种化合物的平均添加回收率为79.6%～100.9%,相对标准偏差为6.3%～12.1%。该方法具有较高的灵敏度和准确度,能满足法规要求的对肉类罐头中双酚A-二缩水甘油醚、双酚F-二缩水甘油醚及其衍生物残留量的快速检测及准确定量。     

Tunable threading/dethreading efficiency of the pseudorotaxane by ether chain length

A series of axles containing the tetraethyl ester calix[4]arene derivative unit and 1,5-dioxynaphthalene (DNP) unit, with different lengths of ether chains, have been synthesized. Complexation of the axles and the cyclobis(paraquat-p-phenylene) (CBPQT⁴⁺) has been investigated by UV-vis and ¹H NMR spectra. The effect of the length of ether chain on the threading/dethreading processes has also been demonstrated, which indicated that the efficiency of threading/dethreading process decreases with the extension of ether chain.     

The Preparation of a Decylidene Bis(4′-benzo-15-crown-5) Ether Membrane Rubidium(I) Electrode

A rubidium-selective electrode has been developed by coating a graphite rod with a PVC membrane containing decylidene bis(4′-benzo-15-crown-5) ether, which is used as a neutral carrier. This electrode exhibited a near Nernstian response to rubidium in the range 1.0 × 10⁻¹to 5.0 × 10⁻⁵mol/liter with a slope of 52 mV/pC. The detection limit was 2.0 × 10⁻⁵mol/liter. This decylidene bis(4′-benzo-15-crown-5) ether is a new compound prepared by Sichuan University and has never been used to prepare a rubidium electrode.     

Study of bis(bibenzyls) in bryophytes using electron ionization time-of-flight and electrospray ionization triple-quadrupole mass spectrometry

A detailed analysis of mass spectra generated from bis(bibenzyl) compounds in bryophytes under electron ionization time-of-flight (EI-TOF) and electrospray ionization triple-quadrupole (ESI-TQ) mass spectrometry conditions is reported. Proposed structures of the fragment ions were obtained by tracking the functional groups of 15 bis(bibenzyls), the structures of which are similar except for some alkoxyl substituents and linkage sites of biphenyl ether bonds. The elucidation was aided by the use of accurate mass measurements. Attempts have been made to provide rational pathways for the formation of these fragment ions, and a generalized fragmentation mechanism is proposed. The bis(bibenzyls) mentioned in this study include three types according to their structure characteristics, i.e. one biphenyl ether bond (A-type), two biphenyl ether bonds (B-type), one biphenyl ether and one biphenyl bond (C-type). The three types display different EI-MS and ESI-MS/MS product profiles, by which the bis(bibenzyl) type and the number of alkoxyl substituents can be identified. Isomers of bis(bibenzyls) can be differentiated to some extent, while the linkage sites of biphenyl ether bonds are difficult to identify. The structure-fragmentation relationships will facilitate the characterization of other bis(bibenzyls) and this will be of value for the high-throughput screening of novel bis(bibenzyls) in bryophytes.     

Toward a modular, bidirectional synthesis of (−)-mucocin

A convergent stereoselective synthesis of the C13-C34 fragment of (−)-mucocin is described. The salient features include (a) the bidirectional synthesis of the C-2 symmetric C13-C21 subunit, (b) regio- and stereoselective preparation of a 1,3-diol derivative from a diene activated by NBS via intramolecular nucleophilic sulfinyl group participation, (c) utilizing the self-metathesis reaction to prepare a functionalized C10 alkene, and (d) regio- and stereoselective intermolecular epoxide opening to construct the ether bond between C20 and C24. An organocatalytic α-hydoxylation has been employed to create the C4 stereogenic center of C1-C12 subunit. Attempted union of the two subunits utilizing the B-alkyl Suzuki coupling did not succeed.     

Chromogenic betaine lariates for highly selective calcium ion sensing in aqueous environment

This paper describes the design, synthesis, and the characterization of the two new chromogenic crown ethers 2,2′-[1,4,10,13-tetraoxa-7,16-diazacyclooctadecane-7,16-diylbis(methylene)]bis[4-[(1-methyl-4-(1H)-pyridinylidene)ethylidene]-2,5-cyclohexadien-1-one (KBC-001) and the lipophilic derivative 2,2′-[1,4,10,13-tetraoxa-7,16-diazacyclooctadecane-7,16-diylbis(methylene)]bis[4-[(1-dodecyl-4-(1H)-pyridinylidene)ethylidene]-2,5-cyclohexadien-1-one (KBC-002). A merocyanine dye that forms a betainic structure upon intramolecular charge transfer and shows solvent polarity dependent spectral sensitivity was selected as the chromophore system to develop the new chromoionophores. This approach allows the design of overall electrically neutral ligands bearing charged groups without the need of external counter ions. A proton ionizable group in the dye moiety acts as a charged ion-binding site and is an integral part of a lariat crown ether ionophore. A chromoionophore for calcium ion sensing has been developed, which combines the size-selective binding character of a crown ether with strong electrostatic attraction between the positively charged calcium ion and two negatively charged lariat side arms in the overall neutral compound. This water-soluble dye selectively responds to the presence of calcium ions in water at pH 8.5 with a dynamic response range between 10 μM and 10 mM. The binding event can be monitored both by absorption spectrometry and by fluorescence spectrometry. No cross-sensitivity was found for the physiologically important cations Mg²⁺, Li⁺, Na⁺, and K⁺ up to concentrations of 0.1 M under the same experimental conditions. In contrast to the water-soluble reagent KBC-001, the lipophilized derivative KBC-002 having two long alkyl chains was successfully applied to ion-exchange type optode membranes made from plasticized poly(vinyl chloride) (PVC). The dynamic response range of the optode at pH 9.0 was between 10 μM and 10 mM while retaining the high calcium selectivity.     

Bis(m-phenylene)-32-crown-10/monopyridinium [2]pseudorotaxanes

The first crown ether/monopyridinium threaded structures, which are [2]pseudorotaxanes based on a new bis(m-phenylene)-32-crown-10/monopyridinium recognition motif, were successfully prepared as confirmed by proton NMR spectroscopy, electrospray ionization mass spectrometry, and X-ray analysis.     

Biomimetic total synthesis of tricycloillicinone and mechanistic studies toward the rearrangement of prenyl phenyl ethers

The Letter describes a short and biomimetic synthesis of tricycloillicinone, which was found to enhance the action of choline acetyltransferase (ChAT). The synthetic route has two critical reactions: bulky, oxygenophilic methylaluminum bis(4-bromo-2,6-di-tert-butylphenoxide) (MABR) promoted rearrangement of prenyl phenyl ether and photochemical cyclization. Furthermore, experiments were designed to explore the process of MABR-promoted rearrangement. It was found that the stereochemistry of deuterium labeled prenyl group was only partially scrambled, which suggests that there may be two possible reaction pathways involved in this process. It also suggests that the direct migration of prenyl group to para-position under these conditions is slightly favored over the Claisen-Cope process. The highly efficient synthetic route also provides important new opportunities to explore the biological behavior of tricycloillicinone.     

Synthesis and characterization of soluble polyimides derived from 2′,5′‐bis(3,4‐dicarboxyphenoxy)‐p‐terphenyl dianhydride

A novel bis(ether anhydride) monomer, 2′,5′‐bis(3,4‐dicarboxyphenoxy)‐p‐terphenyl dianhydride, was synthesized from the nitro displacement of 4‐nitrophthalonitrile by the phenoxide ion of 2′,5′‐dihydroxy‐p‐terphenyl, followed by alkaline hydrolysis of the intermediate bis(ether dinitrile) and cyclodehydration of the resulting bis(ether diacid). A series of new poly(ether imide)s bearing laterally attached p‐terphenyl groups were prepared from the bis(ether anhydride) with various aromatic diamines via a conventional two‐stage process that included ring‐opening polyaddition to form the poly(amic acid)s followed by thermal or chemical imidization to the poly(ether imide)s. The inherent viscosities of the poly(amic acid) precursors were in the range of 0.62–1.26 dL/g. Most of the poly(ether imide)s obtained from both routes were soluble in polar organic solvents, such as N,N‐dimethylacetamide. All the poly(ether imide)s could afford transparent, flexible, and strong films with high tensile strengths. The glass‐transition temperatures of these poly(ether imide)s were recorded as between 214 and 276 °C by DSC. The softening temperatures of all the poly(ether imide) films stayed in the 207–265 °C range according to thermomechanical analysis. For all the polymers significant decomposition did not occur below 500 °C in nitrogen or air atmosphere. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1008–1017, 2004     

Synthesis and properties of poly(ether imide)s based on a benzonorbornane bis(ether anhydride)

A novel bis(ether anhydride) monomer, 3,6‐bis(3,4‐dicarboxyphenoxy)benzonorbornane dianhydride, was synthesized from the nitro displacement of 4‐nitrophthalonitrile with 3,6‐dihydroxybenzonorbornane in the presence of potassium carbonate, followed by the alkaline hydrolysis of the intermediate bis(ether dinitrile) and the cyclodehydration of the resulting bis(ether diacid). A series of poly(ether imide)s bearing pendant norbornane groups were prepared from the bis(ether anhydride) with various aromatic diamines via a conventional two‐stage process that included ring‐opening polyaddition to form the poly(amic acid)s followed by thermal imidization to the poly(ether imide)s. The inherent viscosities of the poly(amic acid) precursors were 0.81–1.81 dL/g. The poly(ether imide) with m‐phenylenediamine as a diamine showed good organosolubility. Most of the cast poly(ether imide) films have had high tensile strengths and moduli. The glass‐transition temperatures of these poly(ether imide)s, except for those from rigid p‐phenylenediamine and benzidine, were recorded between 211 and 246 °C by differential scanning calorimetry. The softening temperatures of all the poly(ether imide) films stayed within 210–330 °C according to thermomechanical analysis. No polymers showed significant decomposition before 500 °C in a nitrogen or air atmosphere. A comparative study of the properties with the corresponding poly(ether imide)s without pendant substituents was also made. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1712–1725, 2002     

Sulfur containing polymers.: Aromatic polydithiocarbonates and polythiocarbonates: synthesis and thermal properties

New polydithiocarbonates and polythiocarbonates were obtained by interfacial polymerization of bis(4-mercaptophenyl)methane, bis(4-mercaptophenyl)ether and bis(4-mercaptophenyl)sulfide with phosgene, bisphenol A bischloroformate and bisphenol A polycarbonate oligomers (-OH/-O-CO-Cl terminated). Polymerization process was carried out under interfacial conditions using a phase-transfer catalyst, as earlier described for the synthesis of polydithiocarbonates and polythiocarbonates from 2,2-bis(4-mercaptophenyl)propane. The structures of the polymers were examined by IR and NMR spectroscopies; their thermal properties were investigated by thermogravimetric analysis and differential scanning calorimetry. In particular, the effect of the substitution of one or both the ethereal oxygen atoms of the carbonate group by sulfur has been analyzed by comparing the T_g values and the ability to crystallize of the sulfur containing polymers with those of the corresponding polycarbonates.