Salt effect on complex formation of neutral/polyelectrolyte block copolymers and oppositely charged surfactants

The salt effect on the complex formation of poly(acrylamide)- block-poly(sodium acrylate) (PAM- b-PAA) as a neutral-anionic block copolymer and dodecyltrimethylammonium bromide (DTAB) as a cationic surfactant at different NaBr concentrations, CNaBr, was investigated by turbidimetric titration, steady-state fluorescence spectroscopy, and dynamic light scattering. At C NaBr < 0.25 M, DTAB molecules may form micelle-like aggregates on PAM- b-PAA chains to form a PAM- b-PAA/DTAB complex above the critical surfactant concentration C critical for the onset of complex formation. In the region of relatively high turbidity, a larger complex is likely to form a core-shell structure, of which the core is a dense and disordered microphase made of surfactant micelles connected by the PAA blocks. The corona was a diffuse shell of PAM chains, and it ensured steric stability. At CNaBr = 0.25 M, a higher electrostatic intermicellar repulsion and intercomplex repulsion induced by a large amount of bound DTAB micelles may lead to a redissolution of large colloidal complexes into intrapolymer complexes. Moreover, a salt-enhancing effect on the complex formation was observed in the PAM- b-PAA/DTAB system; the critical surfactant concentration decreased with increasing salt concentration at CNaBr < 0.10 M. The salt-enhancing effect is due to the larger increase of interaction in comparison to the screening of the interaction.     

Salt effect on the complex formation between cationic gemini surfactant and anionic polyelectrolyte in aqueous solution

Salt effect on the interaction of anionic polyelectrolyte sodium carboxymethylcellulose (NaCMC) with cationic gemini surfactant hexamethylene-1,6-bis(dodecyldimethylammonium bromide) [C12H25(CH3)2N(CH2)6N(CH3)2C12H25]Br2 (C12C6C12Br2) has been investigated using turbidimetric titration, steady-state fluorescence, and mobility measurement. It is found that the critical aggregation concentration(cac) for C12C6C12Br2/NaCMC complexes depends little on addition of sodium bromide (NaBr). However, in the presence of nonionic surfactant Triton X-100 (TX100), the critical ionic surfactant mole fraction for the onset of complex formation (Yc) increases markedly with increasing NaBr concentration. These salt effects are supposed as the overall result from competition between the increase of interaction and the screening of interaction. The increase of interaction is referred to as the effect that the larger micelle with higher surface charge density induced by salt has a stronger interaction with oppositely charged polyelectrolyte. The screening of interaction is referred to as the salt screening of electrostatic attraction between the polymer chain and the surfactant. For complex formation between C12C6C12Br2 and NaCMC, the increase of interaction probably compensates the screening of interaction, leading to constant cac values at different salt concentrations. For complex formation between the C12C6C12Br2/TX100 mixed micelle and NaCMC, the screening of interaction probably plays a dominant role, leading to higher suppression of electrostatic binding of micelles to polyelectrolyte.     

Structural behaviour of mixed cationic surfactant micelles: a small-angle neutron scattering study

Self-assembly in mixtures of two single-chain cationic surfactants, with different tail lengths (CTAB and DTAB) as well as of a single-chain (DTAB) and a double-chain (DDAB) cationic surfactant, with identical tail lengths, have been investigated with small-angle neutron scattering (SANS) and rationalised in terms of bending elasticity properties. The growth behaviour of micelles with respect to surfactant composition appears completely different in the two surfactant mixtures. DTAB form small oblate spheroidal micelles in presence of [NaBr] = 0.1 M that transform into prolate spheroidal mixed CTAB/DTAB micelles upon adding moderate amounts of CTAB, so as to give a mole fraction y = 0.20 in solution. Most unexpectedly, upon further addition of CTAB the mixed CTAB/DTAB micelles grow with an almost equal rate in both length and width directions to form tablets. In contrast to this behaviour, mixed DDAB/DTAB micelles grow virtually exclusively in the length direction, in presence of [NaBr] = 0.1 M, to form elongated ellipsoidal (tablet-shaped) and subsequently long wormlike micelles as the fraction of DDAB in the micelles increases. Mixed DDAB/DTAB micelles grow to become as long as 2000 Å before an abrupt transition to large bilayer structures occurs. This means that the micelles are much longer at the micelle-to-bilayer transition as compared to the same mixture in absence of added salt. It is found that the point of transition from micelles to bilayers is significantly shifted towards higher fractions of aggregated DTAB as an appreciable amount of salt is added to DDAB/DTAB mixtures, indicating a considerable reduction of the spontaneous curvature with an increasing [NaBr]. By means of deducing the various bending elasticity constants from our experimental results, according to a novel approach by ours, we are able to conclude that the different growth behaviours appear as a consequence of a considerably lower bending rigidity, as well as higher saddle-splay constant, for DDAB/DTAB surfactant mixtures in presence of [NaBr] = 0.1 M, as compared to mixtures of CTAB/DTAB in [NaBr] = 0.1 M and DDAB/DTAB in absence of added salt.     

Interaction Between 1-Dodecyl-3-Methylimidazolium Bromide and Sodium Carboxymethylcellulose in Aqueous Solution: Effect of Polymer Concentration

Effect of the concentration of water-soluble polyanion (sodium carboxymethylcellulose, NaCMC) on the interaction between a cationic surfactant (1-dodecyl-3-methylimidazolium bromide, C₁₂mimBr) and NaCMC in aqueous solution has been studied by isothermal titration microcalorimetry (ITC), conductivity, surface tension, and rheological measurements. From the surfactant/polymer interacting enthalpy, it can be deduced that the electrostatic attraction between the cationic surfactant and anionic polyelectrolyte causes an endothermic process, and the C₁₂mimBr monomers binding to the NaCMC chains to form micelle-like aggregates through hydrophobic interaction is an exothermic process. Increasing the NaCMC concentration causes the interaction between C₁₂mimBr and NaCMC to decrease, and the characteristic surfactant concentrations, including the critical aggregation surfactant concentration (CAC), the surfactant concentration to form free micelles (C_m), and the saturation concentration of surfactant on the NaCMC chains (C_S) to increase. Because of the strong electrostatic interaction between C₁₂mimBr and NaCMC, the formation of C₁₂mimBr/NaCMC complexes can lead to precipitation or redissolution depending on solution composition, so the critical precipitation concentration (C_P) and the onset of a redissolution concentration (C_R) has been determined by the electrical conductivity. The rheological results reveal a dramatic increase in solution viscosity around the CAC, attributed to interpolymer cross-linking through the formation of mixed micelles involving the carboxylic acid groups of NaCMC and the surfactant.     

Electrostatic self-assembly of neutral and polyelectrolyte block copolymers and oppositely charged surfactant

We investigated the phase behavior and the microscopic structure of the colloidal complexes constituted from neutral/polyelectrolyte diblock copolymers and oppositely charged surfactant by dynamic light scattering (DLS) and small-angle neutron scattering (SANS). The neutral block is poly(N-isopropylacrylamide) (PNIPAM), and the polyelectrolyte block is negatively charged poly(acrylic acid) (PAA). In aqueous solution with neutral pH, PAA behaves as a weak polyelectrolyte, whereas PNIPAM is neutral and in good-solvent condition at ambient temperature, but in poor-solvent condition above approximately 32 degrees C. This block copolymer, PNIPAM-b-PAA with a narrow polydispersity, is studied in aqueous solution with an anionic surfactant, dodecyltrimethylammonium bromide (DTAB). For a low surfactant-to-polymer charge ratio Z lower than the critical value ZC, the colloidal complexes are single DTAB micelles dressed by a few PNIPAM-b-PAA. Above ZC, the colloidal complexes form a core-shell microstructure. The core of the complex consists of densely packed DTA+ micelles, most likely connected between them by PAA blocks. The intermicellar distance of the DTA+ micelles is approximately 39 A, which is independent of the charge ratio Z as well as the temperature. The corona of the complex is constituted from the thermosensitive PNIPAM. At lower temperature the macroscopic phase separation is hindered by the swollen PNIPAM chains. Above the critical temperature TC, the PNIPAM corona collapses leading to hydrophobic aggregates of the colloidal complexes.     

Effect of salt and surfactant concentration on the structure of polyacrylate gel/surfactant complexes

Small-angle X-ray scattering was used to elucidate the structure of crosslinked polyacrylate gel/dodecyltrimethylammonium bromide complexes equilibrated in solutions of varying concentrations of surfactant and sodium bromide (NaBr). Samples were swollen with no ordering (micelle free), or they were collapsed with either several distinct peaks (cubic Pm3n) or one broad correlation peak (disordered micellar). The main factor determining the structure of the collapsed complexes was found to be the NaBr concentration, with the cubic structure existing up to approximately 150 mM NaBr and above which only the disordered micellar structure was found. Increasing the salt concentration decreases the polyion mediated attractive forces holding the micelles together causing swelling of the gel. At sufficiently high salt concentration the micelle-micelle distance in the gel becomes too large for the cubic structure to be retained, and it melts into a disordered micellar structure. As most samples were above the critical micelle concentration, the bulk of the surfactant was in the form of micelles in the solution and the surfactant concentration thereby had only a minor influence on the structure. However, in the region around 150 mM NaBr, increasing the surfactant concentration, at constant NaBr concentration, was found to change the structure from disordered micellar to ordered cubic and back to disordered again.     

Binding of oppositely charged surfactants to spherical polyelectrolyte brushes: a study by cryogenic transmission electron microscopy

The formation of a complex between an anionic spherical polyelectrolyte brush (SPB) and the cationic surfactant cetyltrimethylammonium bromide (CTAB) is investigated. The SPB consists of long chains of the strong polyelectrolyte poly(styrene sulfonate) (PSS), which are bound chemically to a solid poly(styrene) core of 56 nm in radius. The SPB are dispersed in water, and the ionic strength is adjusted by addition of NaBr. The resulting complexes are investigated in dilute solution by dynamic light scattering, by electrophoretic light scattering, and by cryogenic transmission electron microscopy (cryo-TEM). The formation of the complex between the SPB and the surfactant can be monitored by a strong shrinking of the surface layer when adding CTAB to dilute suspensions (0.01 wt %) and by a decrease of the effective charge of the complexes. Complex formation starts at CTAB concentrations lower than the critical micelle concentration of this surfactant. If the ratio r of the charges on the SPB to the charge of the added surfactant is exceeding unity, the particles start to flocculate. Cryo-TEM images of the complexes at r = 0.6 measured in salt-free solution show that the surface layer composed of the PSS chains and the adsorbed CTAB molecules is partially collapsed: A part of the chains form a dense surface layer while another part of the chains or aggregates thereof are still sticking out. This can be deduced from the cryo-TEM micrographs as well as from the hydrodynamic radius, which is still of appreciable magnitude. The 1:1 complex (r = 1.0) exhibits a fully collapsed layer formed by the PSS chains and CTAB. If the complex is formed in the presence of 0.05 M NaBr, r = 0.6 leads to globular structures directly attached to the surface of the core particles. All structures seen in the cryo-TEM images can be explained by a collapse transition of the surface layer brought about by the hydrophobic attraction between the polyelectrolyte chains that became partially hydrophobic through adsorption of CTAB.     

Investigation on the interaction between C16TAB and NaCMC in semidilute aqueous solution based on rheological measurement

The rheological behavior of unentangled and entangled semidilute solution of anionic polyelectrolyte sodium carboxymethyl cellulose (NaCMC) containing cationic surfactant cetyltrimethylammonium bromide (C₁₆TAB) was investigated. The results reveal that the rheological properties of these semidilute NaCMC solutions depend on the amount of C₁₆TAB added. In the unentangled semidilute NaCMC solution (0.5 g/L), the viscosity decreases with the increase of C₁₆TAB amount in the low surfactant concentration region (below the critical aggregation concentration, CAC). However, in high surfactant concentrations (above CAC), the viscosity decreases sharply with the increase in C₁₆TAB amount. It is found that viscosity change of NaCMC solution could be described using Colby’s model when surfactant concentrations are between CAC and saturated concentration (C_s), suggesting that no inter-polymer interaction exists between C₁₆TAB and NaCMC in the unentangled semidilute solution. However, for the entangled semidilute NaCMC solution (5 g/L), the addition of C₁₆TAB leads to an increase in viscosity. Meanwhile, the solution exhibits an enhanced shear thinning behavior due to adding more C₁₆TAB than 1 mM. The viscosity increase is ascribed to the physical cross linking of surfactant micelles with NaCMC chains. Furthermore, it is suggested that the enhanced shear thinning behavior results from weak interaction between NaCMC chains and C₁₆TAB micelles.     

Polymer-Surfactant Interactions and the Effect of Tail Size Variation on Micellization Process of Cationic ATAB Surfactants in Aqueous Medium

The interactions between oppositely charged surfactant-polymer systems have been studied using surface tension and conductivity measurements and the dependence of aggregation phenomenon over the polyelectrolyte concentration and chain length of cationic ATAB surfactants, cetyltrimethyl ammonium bromide (CTAB), tetradecyltrimethyl ammonium bromide (TTAB), and dodecyltrimethyl ammonium bromide (DTAB) have been investigated. It was observed that cationic surfactants induce cooperative binding with anionic polyelectrolyte at critical aggregation concentration (cac). The cac values of ATAB surfactants in the presence of anionic polyelectrolyte, sodium carboxy methyl cellulose (NaCMC), are considerably lower than their critical micelle concentration (cmc). After the complete complexation, free micelles are formed at the apparent critical micelle concentration (acmc), which is slightly higher in polyelectrolyte aqueous solution than in pure water. Among the cationic surfactants (i.e., CTAB, TTAB, and DTAB), DTAB was found to have least interaction with NaCMC. Surfactants with longer tail size strongly favor the interaction, indicating the dependence of aggregation phenomenon on the structure, morphology, and tail length of the surfactant.      

Partitioning of macrocyclic compounds in a cationic and an anionic micellar solution: a small-angle neutron scattering study

Following a previous investigation on partitioning of some macrocycle compounds in sodium dodecyl sulfate (SDS) and dodecyltrimethylammonium bromide (DTAB) aqueous solutions and their effect on the micellar structure, a small-angle neutron scattering (SANS) study has been performed at fixed surfactant content (0.20 mol/L) and varying macrocycle concentrations from 0.20 up to 1.0 mol/L. Conductivity measurements have been also performed in order to evaluate the effect of the presence of macrocycles on the critical micellar concentration (cmc) of the two surfactants. SANS experimental data were fitted successfully by means of a core-plus-shell monodisperse prolate ellipsoid model. It has been found that 1,4,7,10,13,16-esaoxacyclooctadecane (18C6) and 4,7,13,16-tetraoxa-1,10-diazacyclooctadecane (22) do not interact with DTAB micelles whereas their sodium complexes interact with SDS aggregates and partially localize, as a consequence of electrostatic interaction, on the micellar surface or in the Stern layer. 2,5,8,11,14,17-Hexaoxabicyclo[16.4.0] dicosane (B18C6), as a consequence of the increased hydrophobic character with respect to 18C6, interacts with DTAB hydrocarbon chains and partially localizes in the inner part of micelles. This finding has been successfully used to justify the higher amount of B18C6 compared to the 18C6 one found in the SDS micellar phase. The substituted crown ether has been found localized both on the micelle surface via complex formation and in the inner part of micelles as a consequence of the increased hydrophobic character. For all systems, the aggregate size primarily decreases with the amount of macrocycle in the micellar phase. The interpretation of cmc trends as a function ofmacrocycle concentration gives information on its distribution between micellar and aqueous phases that is in line with SANS results.     

Water-soluble complexes between cationic surfactants and comb-type copolymers consisting of an anionic backbone and hydrophilic nonionic poly(N,N-dimethylacrylamide) side chains

The formation of complexes between the cationic surfactant dodecyl trimethylammonium bromide (DTAB) and the comb-type anionic polyelectrolytes poly(sodium acrylate-co-sodium 2-acrylamido-2-methylpropane sulfonate)-g-poly(N,N-dimethylacrylamide) (P(NaA-co-NaAMPS)-g-PDMAMx) was investigated in dilute aqueous solutions by means of turbidimetry, pyrene fluorescence probing, viscometry, z-potential measurements, and dynamic light scattering. The comb-type copolymers consist of an anionic copolymer backbone, P(NaA-co-NaAMPS), containing 84 mol % NaAMPS units, while the weight percentage, x, of the PDMAM side chains varies from x = 12% (w:w) up to x = 58% (w:w). It was found that, contrary to the water-insoluble complexes formed between the linear polyelectrolyte P(NaA-co-NaAMPS) and DTAB, the solubility in water of the complexes formed between the comb-type copolymers and DTAB is significantly improved with increasing x. The complexation process starts at the same critical aggregation concentration (about 2 orders of magnitude lower than the critical micelle concentration of DTAB), regardless of x, and it is accompanied by charge neutralization and appearance of hydrophobic microdomains. Both effects lead to the substantial collapse of the polyelectrolyte chain upon addition of DTAB. However, the complexes of the comb-type copolymers with DTAB are stabilized in water as nanoparticles, and probably consisted of a water-insoluble core (the polyelectrolyte/surfactant complex), protected by a hydrophilic nonionic PDMAM corona. The size of the nanoparticles varies from approximately 35 nm up to approximately 120 nm, depending on x.     

Interactions of two homologues of cationic surface active ionic liquids with sodium carboxymethylcellulose in aqueous solution

In the preceding paper of this series, we studied the interactions of copolymers with the ionic liquids, 1-alkyl-3-methylimidazolium bromide (C _n mimBr, n?=?8, 10, 12, 14, 16) and N-alkyl-N-methylpyrrolidinium bromide (C _n MPB, n?=?12, 14, 16). An obvious difference was detected between the interaction mechanism and the alkyl chain length of the surfactant. In the present study, we performed a systematic study on the interaction of sodium carboxymethylcellulose (NaCMC) with ionic liquids in aqueous solution by isothermal titration microcalorimetry (ITC), conductivity, turbidity, and dynamic light scattering (DLS) measurements. The existence of electrostatic attraction between NaCMC and ILs could increase the complexity of these systems. The results show that the monomers of C₈mimBr can bind to the NaCMC chains and form free surfactant micelles in the solution, while no micelle-like C₈mimBr/NaCMC cluster is detected. For other surfactants, the formation of surfactant/NaCMC clusters in the solution is driven by electrostatic and hydrophobic interactions, which could be divided into two types. One type is the polymer-induced surfactant/NaCMC complexes that form in the solution for the surfactant of C _n mimBr (n?=?10, 12, 14) or C _n MPB (n?=?12, 14). The other type is that the surfactant-induced surfactant/NaCMC complexes come into being for the surfactant of C₁₆mimBr or C₁₆MPB. Finally, the different modes of complex formation proposed have a good interpretation of the experiment results, unraveling the details of the effect of surfactant alkyl chain length and headgroup on the surfactant–NaCMC interactions.     

离子液体在多水相液液平衡体系中的作用

通过用短链离子液体(1-乙基-3-甲基咪唑溴盐[C2mim]Br、1-丁基-3-甲基咪唑溴盐[C4mim]Br)部分或全部取代SDS/DTAB/PEG/NaBr/H2O多水相体系中的无机盐NaBr,用长链离子液体十二烷基-3-甲基咪唑溴盐[C12mim]Br部分取代体系中阳离子表面活性剂DTAB,系统研究了离子液体在分相体系中的作用及其对分相体系性质的影响.研究表明,SDS/DTAB/PEG/NaBr/H2O混合体系形成的四水相体系可以看作"聚合物双水相"与"表面活性剂双水相"共存的结果.短链离子液体([C2mim]Br、[C4mim]Br)较强的亲水性能赋予其较强的盐析能力,在混合体系中表现出明显的盐效应,保证了四水相体系中"聚合物双水相"的存在.短链离子液体与聚合物之间的相互作用及其对表面活性剂之间相互作用的影响均不可忽略.对混合体系的相行为,共存多相的性质有重要的影响.而长链离子液体[C12mim]Br主要通过自身的疏水作用影响"表面活性剂双水相"的性质,充当表面活性剂的角色.然而,[C12mim]Br与DTAB分子结构上的差异,导致表面活性剂分子在"表面活性剂双水相"的两相重新分配,影响了对应两相的体积及萃取能力.可见,通过调节离子液体的烷基链长、混合体系中的含量等可获得具有特定性质的多水相体系.     

Temperature responsive complex coacervate core micelles with a PEO and PNIPAAm corona

In aqueous solutions at room temperature, poly( N-methyl-2-vinyl pyridinium iodide)- block-poly(ethylene oxide), P2MVP 38- b-PEO 211 and poly(acrylic acid)- block-poly(isopropyl acrylamide), PAA 55- b-PNIPAAm 88 spontaneously coassemble into micelles, consisting of a mixed P2MVP/PAA polyelectrolyte core and a PEO/PNIPAAm corona. These so-called complex coacervate core micelles (C3Ms), also known as polyion complex (PIC) micelles, block ionomer complexes (BIC), and interpolyelectrolyte complexes (IPEC), respond to changes in solution pH and ionic strength as their micellization is electrostatically driven. Furthermore, the PNIPAAm segments ensure temperature responsiveness as they exhibit lower critical solution temperature (LCST) behavior. Light scattering, two-dimensional 1H NMR nuclear Overhauser effect spectrometry, and cryogenic transmission electron microscopy experiments were carried out to investigate micellar structure and solution behavior at 1 mM NaNO 3, T = 25, and 60 degrees C, that is, below and above the LCST of approximately 32 degrees C. At T = 25 degrees C, C3Ms were observed for 7 < pH < 12 and NaNO 3 concentrations below approximately 105 mM. The PEO and PNIPAAm chains appear to be (randomly) mixed within the micellar corona. At T = 60 degrees C, onion-like complexes are formed, consisting of a PNIPAAm inner core, a mixed P2MVP/PAA complex coacervate shell, and a PEO corona.     

A small-angle neutron and static light scattering study of micelles formed in aqueous mixtures of a nonionic alkylglucoside and an anionic surfactant

The size and shape of micelles formed in aqueous mixtures of the anionic surfactant sodium dodecyl sulfate (SDS) and the nonionic sugar-based surfactant n-decyl beta-D-glucopyranoside (C(10)G) at different concentrations of added salt have been investigated with small-angle neutron and static light scattering. Rather small prolate ellipsoidal micelles form in the absence of added salt and at [NaCl] = 10 mM in D(2)O. The micelles grow considerably in length to large rods as the electrolyte concentration is raised to [NaCl] = 0.1 M. In excess of nonionic surfactant ([SDS]/[C(10)G] = 1:3) at [NaCl] = 0.1 M in D(2)O, several thousands of Angstroms long wormlike micelles are observed. Most interestingly, a conspicuously large isotope solvent effect was observed from static light scattering data according to which micelles formed at [SDS]/[C(10)G] = 1:3 and [NaCl] = 0.1 M in H(2)O are at least five times smaller than micelles formed in the corresponding samples in D(2)O.     

C14BE与NaCMC之间的相互作用(Ⅰ)──NaCMC对C14BE表面活性的影响

以表面张力法研究了NaCMC与C₁₄BE之间的相互作用。结果表明:在纯水介质中,NaCMC对C₁₄BE的表面活性影响较小,但NaCl的存在对C₁₄BE与NaCMC间的缔合有促进作用,混合体系的σ～C曲线出现两个转折点。二者开始缔合的浓度小于cmc,完成缔合的浓度大于cmc.pH=2时,形成C₁₄BE/H-CMC复合物,使C₁₄BE的表面活性降低,σ～C曲线亦出现两个转折点。     

Salt effect on the interactions between gemini surfactant and oppositely charged polyelectrolyte in aqueous solution

The effect of alkali halides (NaBr, NaCl, KCl) on the interactions between the cationic gemini surfactant hexylene-1,6-bis(dodecyldimethylammonium bromide) (12-6-12) and the anionic polyelectrolyte sodium polyacrylate (NaPAA) in aqueous solution has been investigated by fluorescence emission spectroscopy, UV transmittance, zeta potential, and transmission electron microscopy (TEM). With increased addition of NaBr, a counterbalancing salt effect on the critical aggregation concentration (CAC) is observed. At low concentrations, NaBr facilitates the formation of micelle-like structures between surfactant and polyelectrolyte and results in a smaller CAC. At high concentrations, NaBr screens the electrostatic attraction between surfactant and polyelectrolyte and leads to a larger CAC. Upon the formation of micelle-like structures at high surfactant concentrations, the addition of NaBr is favorable for larger aggregates. The microstructure detected by TEM show that a global structure is generally formed in the presence of NaBr. The interactions also depend on ion species. Compared to NaBr, the addition of NaCl or KCl yields a smaller CAC.     

Interactions of a hydrophobically modified polymer with oppositely charged surfactants

The interaction of a hydrophobically modified anionic polymer (PMAOVE) with a cationic surfactant (DTAB) was studied using a multi-technique approach: turbidity, surface tension, and viscosity measurements, as well as EPR (5-doxyl stearic acid) and fluorescence (pyrene) probe techniques were used. In the investigated pH range (4-10), the cationic surfactant headgroups interact with the anionic carboxylic groups of the polymer backbone. In addition, nonpolar interactions of the surfactant chains with the n-octyl chains of PMAOVE stabilize the PMAOVE-DTAB complexes. Charge neutralization of the anionic polymer by the cationic surfactant leads to precipitation of the PMAOVE-DTAB complex at a certain DTAB concentration range. Further addition of DTAB causes a charge reversal of the complex and, subsequently, resolubilization of the precipitate. At an acidic pH (pH = 4), a second precipitation was observed, which is probably caused by conformational changes in the PMAOVE-DTAB complex. This second precipitate can be resolubilized by further addition of surfactant. At a neutral and basic pH, this second precipitation is absent. EPR analysis indicates that the surfactants form an ordered structure at the extended polymer chain at a neutral and basic pH, whereas at an acidic pH, a less ordered surfactant layer is formed on the coiled polymer with more hydrophobic microdomains.     

Structural organization of cetyltrimethylammonium sulfate in aqueous solution: The effect of Na2SO4

We used dynamic light scattering (DLS), steady-state fluorescence, time resolved fluorescence quenching (TRFQ), tensiometry, conductimetry, and isothermal titration calorimetry (ITC) to investigate the self-assembly of the cationic surfactant cetyltrimethylammonium sulfate (CTAS) in aqueous solution, which has SO(2-)4 as divalent counterion. We obtained the critical micelle concentration (cmc), aggregation number (N(agg)), area per monomer (a0), hydrodynamic radius (R(H)), and degree of counterion dissociation (alpha) of CTAS micelles in the absence and presence of up to 1 M Na2SO4 and at temperatures of 25 and 40 degrees C. Between 0.01 and 0.3 M salt the hydrodynamic radius of CTAS micelle R(H) approximately 16 A is roughly independent on Na2SO4 concentration; below and above this concentration range R(H) increases steeply with the salt concentration, indicating micelle structure transition, from spherical to rod-like structures. R(H) increases only slightly as temperature increases from 25 to 40 degrees C, and the cmc decreases initially very steeply with Na2SO4 concentration up to about 10 mM, and thereafter it is constant. The area per surfactant at the water/air interface, a0, initially increases steeply with Na2SO4 concentration, and then decreases above ca. 10 mM. Conductimetry gives alpha = 0.18 for the degree of counterion dissociation, and N(agg) obtained by fluorescence methods increases with surfactant concentration but it is roughly independent of up to 80 mM salt. The ITC data yield cmc of 0.22 mM in water, and the calculated enthalpy change of micelle formation, Delta H(mic) = 3.8 kJ mol(-1), Gibbs free energy of micellization of surfactant molecules, Delta G(mic) = -38.0 kJ mol(-1) and entropy TDelta S(mic) = 41.7 kJ mol(-1) indicate that the formation of CTAS micelles is entropy-driven.     

Co-adsorption of carboxymethyl-cellulose and cationic surfactants at the air-water interface

We investigated the interaction between an anionic polyelectrolyte (carboxymethylcellulose) and cationic surfactants (DTAB, TTAB, and CTAB) at the air/water interface, using surface tension, ellipsometry, and Brewster angle microscopy techniques. At low surfactant concentration, a synergistic phenomenon is observed due to the co-adsorption of polyelectrolyte/surfactant complexes at the interface, which decreases the surface tension. When the surfactant critical aggregation concentration (cac) is reached, the adsorption saturates and the thickness of the adsorbed monolayer remains constant until another characteristic surfactant concentration, C0, is reached, at which all the polymer charges are bound to surfactant in bulk. Above C0, the absorbed monolayer becomes much thicker, suggesting adsorption of bulk aggregates, which have become more hydrophobic due to charge neutralization.