Stability of flow of a thin layer of viscous magnetic liquid

The laminar flow of a thin layer of heavy viscous magnetic liquid down an inclined wall is examined. The stability and control of the flow of an ordinary liquid are affected only by alteration of the angle of inclination of the solid wall and the velocity of the adjacent gas flow. When magnetic liquids are used [1, 2], an effective method of flow control may be control of the magnetic field. By using magnetic fields of various configurations it is possible to control the flow of a thin film of viscous liquid, modify the stability of laminar film flow, and change the shape of the free surface of the laminarly flowing thin film, a factor which plays a role in mass transfer, whose rate depends on the phase contact surface area. The magnetic field significantly affects the shape of the free surface of a magnetic liquid [3, 4]. In this paper the velocity profile of a layer of viscous magnetic liquid adjoining a gas flow and flowing down an inclined solid wall in a uniform magnetic field is found. It is shown that the flow can be controlled by the magnetic field. The problem of stability of the flow is solved in a linear formulation in which perturbations of the magnetic field are taken into account. The stability condition is found. The flow stability is affected by the nonuniform nature of the field and also by its direction.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 59–65, September–October, 1977.     

Numerical investigation of the hydrodynamic drag of a circular cylinder coated with a thin layer of magnetic fluid

In order to reduce the drag of bodies in a viscous flow it has been proposed to apply to the surface exposed to the flow a layer of magnetic fluid, which can be retained by means of a magnetic field and thus act as a lubricant between the external flow and the body [1, 2]. In [1] the hydrodynamic drag of a current-carrying cylindrical conductor coated with a uniform layer of magnetic fluid was theoretically investigated at small Reynolds numbers. In order to simplify the equations of motion, the Oseen approximation was introduced for the free stream and the Stokes approximation for the magnetic fluid [3]. This approach has led to the finding of an exact analytic solution from which it follows that at Reynolds numbers Re 1 the drag of the cylinder can be considerably reduced if the viscosity of its magnetic-fluid coating is much less than the viscosity of the flow. The main purpose of the present study is to investigate, with reference to the same problem, how the magnetic-fluid coating affects the hydrodynamic drag at Reynolds numbers 1 Re 10²–10³, i.e., under separated flow conditions. In this case the simplifications associated with neglecting the nonlinear inertial terms in the Navier—Stokes equation are inadmissible, so that a solution can be obtained only by numerical methods.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 11–16, May–June, 1986.     

Viscous flow in a partially-filled horizontal cylinder rotating at constant speed

The problem under consideration is that of the stationary shape of the free surface of a viscous fluid in a steadily rotating horizontal cylinder. In the majority of investigations of this problem the thickness of the fluid layer coating the inner surface of the cylinder is assumed to be small [1–3]. The case of a near-horizontal free surface, with the bulk of the fluid at the cylinder bottom, was considered in [4], where, after considerable simplification, the governing equations were reduced to ordinary differential equations. In the present study the behavior of the free surface is investigated using a creeping flow approximation. The controlling parameters vary over a wide range. In the numerical computations a boundary element method was used. The numerical results have been confirmed experimentally.Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 3, pp. 25–30, May–June, 1993.     

Viscous incompressible fluid motion on a rotating sphere in the central newtonian attraction field

An approximate solution of the problem of tidal flow in a layer of viscous heavy fluid covering a rigid sphere is constructed. The sphere rotates and moves in a circular orbit in a central Newtonian field. An estimate of the moment of the tidal friction forces is given.Moscow. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 2, pp. 133–141, March–April, 1995.     

Deformation by the external flow of the surface of a magnetic fluid covering a circular cylinder

As one of the methods of controlling separation of a flow and reducing hydrodynamic resistance in flow round the body, [1] proposes covering the surface of the body with a layer of magnetic fluid maintained by a inhombgeneous field. The effectiveness of the method is studied in the example of flow rounda circular cylinder covered with a uniform layer of a magnetic fluid the surface of which is also assumed to be cylindrical and not dependent on the external flow. The resistance of the cylinder falls (if the viscosity of the magnetic fluid is not too high) and can be greatly reduced. It is of interest to determine the nature of the deformation produced in the surface of the magnetic fluid by the external flow, since the degree to which the boundary can be deformed determines whether the proposed method can be realized in practice. Moreover, the magnitude of the deformation evidently affects the resistance of the cylinder and determines the limits of the applicability of the approximation adopted in [1] for the nondeformed state of the surface.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 28–31, January–February, 1988.     

Three-dimensional separation in the neighborhood of roughness on the surface of an axisymmetric body

Steady-state viscous incompressible fluid flow past an axisymmetric slender body is considered at high Reynolds numbers in the regime with vanishing surface friction in a certain cross-section. In a small neighborhood of this cross-section interaction between the boundary layer flow and the external irrotational stream develops. In order to study the structure of the three-dimensional flow with local separation zones it is assumed that there is three-dimensional roughness on the surface of the body with the scale of the interaction zone. For this zone a numerical solution of the problem is obtained and its nonuniqueness is established. The surface friction line (limiting streamline) patterns with their inherent features are constructed.Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 3, pp. 67–79, May–June, 1995.Thus, on the basis of the asymptotic marginal separation theory it is possible to obtain fairly simple solutions describing flows with a complex surface friction line structure.     

Some problems in the theory of plane jets of conducting fluid

Using the boundary-layer equations as a basis, the author considers the propagation of plane jets of conducting fluid in a transverse magnetic field (noninductive approximation).The propagation of plane jets of conducting fluid is considered in several studies [1–12]. In the first few studies jet flow in a nonuniform magnetic field is considered; here the field strength distribution along the jet axis was chosen in order to obtain self-similar solutions. The solution to such a problem given a constant conductivity of the medium is given in [1–3] for a free jet and in [4] for a semibounded jet; reference [5] contains a solution to the problem of a free jet allowing for the dependence of conductivity on temperature. References [6–8] attempt an exact solution to the problem of jet propagation in any magnetic field. An approximate solution to problems of this type can be obtained by using the integral method. References [9–10] contain the solution obtained by this method for a free jet propagating in a uniform magnetic field.The last study [10] also gives a comparison of the exact solution obtained in [3] with the solution obtained by the integral method using as an example the propagation of a jet in a nonuniform magnetic field. It is shown that for scale values of the jet velocity and thickness the integral method yields almost-exact values. In this study [10], the propagation of a free jet is considered allowing for conduction anisotropy. The solution to the problem of a free jet within the asymptotic boundary layer is obtained in [1] by applying the expansion method to the small magnetic-interaction parameter. With this method, the problem of a turbulent jet is considered in terms of the Prandtl scheme. The Boussinesq formula for the turbulent-viscosity coefficient is used in [12].This study considers the dynamic and thermal problems involved with a laminar free and semibounded jet within the asymptotic boundary layer, propagating in a magnetic field with any distribution. A system of ordinary differential equations and the integral condition are obtained from the initial partial differential equations. The solution of the derived equations is illustrated by the example of jet propagation in a uniform magnetic field. A similar solution is obtained for a turbulent free jet with the turbulent-exchange coefficient defined by the Prandtl scheme.     

Magnetohydrodynamic lubrication theory for a cylindrical bearing

Liquid metal, which is a conductor of electric current, may be used as a lubricant at high temperatures. In recent years considerable attention has been devoted to various problems on the motion of an electrically conducting liquid lubricant in magnetic and electric fields (magnetohydrodynamic theory of lubrication), Thus, for example, references [1–3] study the flow of a conducting lubricating fluid between two plane walls located in a magnetic field. An electrically conducting lubricating layer in a magnetohydrodynamic bearing with cylindrical surfaces is considered in [4–8] and elsewhere.The present work is concerned with the solution of the plane magnetohydrodynamic problem on the pressure distribution of a viscous eletrically conducting liquid in the lubricating layer of a cylindrical bearing along whose axis there is directed a constant magnetic field, while a potential difference from an external source is applied between the journal and the bearing. The radial gap in the bearing is not assumed small, and the problem reduces to two-dimensional system of magnetohydrodynamic equations.An expression is obtained for the additional pressure in the lubricating layer resulting from the electromagnetic forces. In the particular case of a very thin layer the result reported in [4–8] is obtained. SI units are used.     

Flow of a vortical stream in the neighborhood of the critical point

A study was made of the axisymmetric flow of a viscous incompressible fluid in the neighborhood of the critical point of an obstacle when steady-state vortices oriented in the direction of the angular coordinate are introduced into the oncoming flow. A solution is presented of the equation for the transfer of a vortex in the case of an external flow containing a single largesize vortex in the low-frequency part of the spectrum. Using a finite integral Hankel transform, the problem is reduced to the solution of a system of ordinary differential equations. It is shown that a sufficiently large-size vortex can have a considerable effect on the structure of viscous flow near an obstacle.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 85–89, November–December, 1970.     

Two-dimensional magnetic fields in magnetohydrodynamic channels with steel walls at finite magnetic reynolds numbers

Plane problems on the distribution of a two-dimensional magnetic field in magnetohydrodynamic channels with ferromagnetic walls at appreciable magnetic Reynolds numbers and prescribed flow hydrodynamics are studied. An integral representation for the total magnetic induction is constructed with the use of a complex influence function describing the field resulting from a unit current. This makes it possible to obtain arbitrarily close approximations to exact solutions of the problems on a digital computer. Influence functions for various channels can be determined by mirror reflections and conformai mappings. The method is illustrated by numerical calculations of the distribution of the magnetic field for the flow of a conducting fluid along a plane ferromagnetic wall and the flow of a fluid in the space between ferromagnetic walls. Calculations are carried out on the effect of an external circuit and an inhomogeneous transverse velocity profile on the distribution of the magnetic field.Translated from Zhumal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 5, pp. 3–11, September–October, 1971.In conclusion the authors thank G. A. Lyubimov, A. B. Vatazhin, V. V. Gogosov, and A. E. Yakuberiko for useful discussion of the formulation of the problem and of results of the study.     

Slow steady flows of a conducting fluid at large Hartmann numbers

We consider slow steady flows of a conducting fluid at large values of the Hartmann number and small values of the magnetic Reynolds number in an inhomogeneous magnetic field. The general solution is obtained in explicit form for the basic portion (core) of the flow, where the inertia and viscous forces may be neglected. The boundary conditions which this solution must satisfy at the outer edges of the boundary layers which develop at the walls are considered. Possible types of discontinuity surfaces and other singularities in the flow core are examined. An exact solution is obtained for the problem of conducting fluid flow in a tube of arbitrary section in an inhomogeneous magnetic field.The content of this paper is a generalization of some results on flows in a homogeneous magnetic field, obtained in [1–8], to the case of arbitrary flows in an inhomogeneous magnetic field. The author's interest in the problems considered in this study was attracted by a report presented by Professor Shercliff at the Institute of Mechanics, Moscow State University, in May 1967, on the studies of English scientists on conducting fluid flows in a strong uniform magnetic field.     

Viscous incompressible flow in a narrow channel with one free wall and fluid supply through a porous insert

The problem investigated relates the plane unsteady flow of a viscous incompressible fluid in a narrow channel one of whose walls is free and acted upon by a given load, while the other is rigidly fixed. The fluid enters the channel through a porous insert in the stationary wall. A model of the flow of a thin film of viscous incompressible fluid and Darcy's law for flow in a porous medium are used to find the distribution of fluid pressure and velocity in the channel and the porous insert in the two-dimensional formulation for fairly general boundary conditions in the case where the length of the porous insert exceeds the length of the free wall. In the particular case where the length of the porous insert is equal to the length of the free wall an exact stationary solution of the problem is obtained for a given value of the channel height. The stability of the equilibrium position of the free wall supported on a hydrodynamic fluid film is examined.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 16–24, January–February, 1986.     

Steady mixed convection flow of Maxwell fluid over an exponentially stretching vertical surface with magnetic field and viscous dissipation

The steady mixed convection flow and heat transfer from an exponentially stretching vertical surface in a quiescent Maxwell fluid in the presence of magnetic field, viscous dissipation and Joule heating have been studied. The stretching velocity, surface temperature and magnetic field are assumed to have specific exponential function forms for the existence of the local similarity solution. The coupled nonlinear ordinary differential equations governing the local similarity flow and heat transfer have been solved numerically by Chebyshev finite difference method. The influence of the buoyancy parameter, viscous dissipation, relaxation parameter of Maxwell fluid, magnetic field and Prandtl number on the flow and heat transfer has been considered in detail. The Nusselt number increases significantly with the Prandtl number, but the skin friction coefficient decreases. The Nusselt number slightly decreases with increasing viscous dissipation parameter, but the skin friction coefficient slightly increases. Maxwell fluid reduces both skin friction coefficient and Nusselt number, whereas buoyancy force enhances them.     

Flow in rotating radial channels at small Rossby and Ekman numbers

The problem of flow of a viscous fluid in a rotating channel is considered in the region of very small Rossby and Ekman numbers and moderately large Reynolds numbers. Asymptotic expressions with respect to the Ekman number are found for the velocity components and the longitudinal pressure gradient by solving a system of linear differential equations using Fourier series. The stability limits of such flow are predicted. Attention is drawn to a similarity between the velocity profiles of these flows and flows of a magnetic fluid and a fluid executing longitudinal oscillations in a fixed channel.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 11–15, January–February, 1984.     

One-dimensional and two-dimensional analogs for three-dimensional viscous flows in the neighborhood of the plane of symmetry of a blunt body

An approximate method of determining the heat transfer and friction stress in three-dimensional flow problems using the two-dimensional and one-dimensional solutions is proposed. This method is applicable over a wide range of Reynolds numbers — from low to high. On the basis of a theoretical analysis of the approximate analytic solution of the equations of a three-dimensional viscous shock layer it is shown that the problem of determining the heat flux in the neighborhood of the plane of symmetry of bodies inclined to the flow at an angle of attack can be reduced, firstly, to the problem of determining that quantity for an axisymmetric body and, secondly, to the problem of determining the heat transfer to an axisymmetric stagnation point. On the basis of an analysis of the results of a numerical solution of the problem it is shown that corresponding analogs can also be used for the friction stress. The accuracy of the similarity relations established is estimated by solving the problem by a finite-difference method. A similarity relation of the same kind was previously obtained in [1] for a double-curvature stagnation point.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 117–122, January–February, 1990.     

Approximate solution of the problem of the flow of a conducting liquid in a duct with rectangular cross section

An approximate analytic solution is constructed for the problem of the fully developed stationary flow of a viscous incompressible liquid with a finite isotropic conductivity in a duct of rectangular cross section in the presence of an external magnetic field at right angles to nonconducting walls. An investigation is made of the extent to which flows in ducts with two electrodes parallel to the field resemble flows with four nonconducting walls. Theoretical and experimental investigations devoted to this problem are reviewed.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 33–40, September–October, 1970.     

Computation of base flow characteristics with uniform blowing

Blowing at bluff body base was considered under different conditions and for small amount of blowing this problem was solved using dividing streamline model [1]. The effect of supersonic blowing on the flow characteristics of the external supersonic stream was studied in [2–4]. The procedure and results of the solution to the problem of subsonic blowing of a homogeneous fluid at the base of a body in supersonic flow are discussed in this paper. Analysis of experimental results (see, e.g., [5]) shows that within a certain range of blowing rate the pressure distribution along the viscous region differs very little from the pressure in the free stream ahead of the base section. In this range the flow in the blown subsonic jet and in the mixing zones can be described approximately by slender channel flow. This approximation is used in the computation of nozzle flows with smooth wall inclination [6, 7]. On the other hand, boundary layer equations are used to compute separated stationary flows with developed recirculation regions [8] in order to describe the flow at the throat of the wake. The presence of blowing has significant effect on the flow structure in the base region. An increasing blowing rate reduces the size of the recirculation region [9] and increases base pressure. This leads to a widening of the flow region at the throat, usually described by boundary-layer approximations. At a certain blowing rate the recirculation region completely disappears which makes it possible to use boundary-layer equations to describe the flow in the entire viscous region in the immediate neighborhood of the base section.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 1, pp. 76–81, January–February, 1984.     

Magnetohydrodynamic oblique stagnation-point flow

Laminar two-dimensional stagnation flow of a viscous and electrically conducting fluid obliquely impinging on a flat plate in the presence of a uniform applied magnetic field is formulated as a similarity solution of the Navier-Stokes equations. The relative importance of this flow is measured by the dimensionless strain rate and magnetohydrodynamic parameters γ and M. The viscous problem is reduced to a coupled pair of ordinary differential equations governed by γ and M. It is found that the parameter M causes a shift in the position of the point of zero skin friction along the wall.     

Surface shape of a magnetic liquid drop near the edge of a magnetic wedge

The two-dimensional problem of the shape of the free surface of a magnetic fluid in a gravity field, a uniform external magnetic field and the nonuniform field of a magnetized metal wedge is considered. The results of numerically calculating the shape of the free surface of a magnetic liquid drop retained on an inclined plane by the field of a magnetizing wedge are presented. The changes in the shape of the free surface of an infinite volume of magnetic liquid near the edge of a wedge with increase in the external field are investigated. It is shown that for a certain critical field some of the magnetic liquid separates and adheres to the edge of the wedge. Experimental data on the determination of the maximum cross-sectional area of a drop retained by the magnetic field of a wedge and the critical rise of the magnetic liquid relative to the level outside the field are presented. The experimental and theoretical results are in agreement.Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No.4, pp. 113–119, July–August, 1992.The authors wish to thank V. V. Gogosov for useful discussions and his interest in the work.     

MHD stagnation-point flow and heat transfer towards stretching sheet with induced magnetic field

The problem of the steady magnetohydrodynamic (MHD) stagnation-point flow of an incompressible viscous fluid over a stretching sheet is studied. The effect of an induced magnetic field is taken into account. The nonlinear partial differential equations are transformed into ordinary differential equations via the similarity transformation. The transformed boundary layer equations are solved numerically using the shooting method. Numerical results are obtained for various magnetic parameters and Prandtl numbers. The effects of the induced magnetic field on the skin friction coefficient, the local Nusselt number, the velocity, and the temperature profiles are presented graphically and discussed in detail.