Square-wave voltammetric stripping analysis of thallium(III) at a poly(4-vinylpyridine)/mercury film electrode

A poly(4-vinylpyridine)/mercury film electrode (PVP/MFE) was used for the determination of trace thallium(III) by square-wave anodic stripping voltammetry (SWASV). Thallium(III) is preconcentrated onto the PVP/MFE as the anionic forms in chloride medium by the ion-exchange effect of the PVP. The high solubility of thallium in mercury further facilitates the accumulation effect. Various factors influencing the determination of thallium(III) were thoroughly investigated. This modified electrode displayed good resistance to interferences from surface-active compounds and common ions and increased sensitivity when used in conjunction with SWASV. In addition, detection can be achieved without deoxygenation and the electrode can be easily renewed. Applicability to various water samples is illustrated.     

Use of binary metal deposits on a cylindrical carbon-fiber microelectrode in the voltammetric determination of metal ions

The effect of binary metal deposits on a cylindrical carbon-fiber microelectrode on the determination of metals by direct and stripping voltammetry was studied. The electrolytic deposition of a binary system of copper and thallium, cadmium, lead, or mercury on the electrode in an alkaline solution resulted in the disappearance of the electroreduction peak of dissolved oxygen in the potential range from -0.8 to -1.4 V and in a decrease in the background current. Under the conditions of limited diffusion, the peak currents of Ni(II), Co(II), and Zn(II) in differential pulse voltammograms were 3–7 times higher than those calculated for a reversible electrode process under the conditions of semi-infinite diffusion. Because of this, the determination limit for metal ions in direct voltammetry was lowered to 1 X 10^-6 M. With a binary copper-thallium system, the peak current of zinc(II) reduction can be be detected in the presence of 5000-fold molar amounts of copper(II). The deposition of binary copper-lead and copper-thallium systems under the conditions of limited diffusion reduced the effect of negative interaction between the components of these systems and made possible the determination of lead(II) and thallium(I) by stripping voltammetry using additional peaks.     

Anodic stripping voltammetric determination of bismuth(III) using a Tosflex-coated mercury film electrode

A Tosflex-mercury film electrode (TMFE) was prepared by spin-coating a solution of the perfluorinated anion exchange polymer Tosflex onto a glassy carbon electrode surface followed by electrodeposition of mercury film on this electrode. This electrode was used for the determination of trace bismuth(III) which was preconcentrated onto the TMFE as anionic bismuth(III) complexes with chloride in a chloride medium. The preconcentration was carried out at a potential of-0.2 V, and the preconcentration of the bismuth(III) was enhanced significantly by the anion-exchange feature of Tosflex. The accumulated bismuth(III) was then determined by anodic square-wave stripping voltammetry (SWSV). Various parameters influencing the determination of bismuth(III) were examined in detail. With 2 min accumulation, the analytical signal versus concentration dependence was linear up to 50 ppb, and the detection limit was 0.58 ppb. This modified electrode showed good resistance to the interferences from surface-active compounds and common ions.     

The cathodic stripping voltammetric determination of traces of iodide with a hanging copper amalgam drop electrode

A hanging copper amalgam drop electrode (HCADE) is used for the determination of traces of iodide by cathodic stripping voltammetry. The cathodic stripping peak of copper(I) iodide from the HCADE is better defined than that of mercury(I) iodide from a hanging mercury drop electrode. Optimum conditions and interferences are reported. With a 3-min deposition time at ?0.1 V vs. SCE, the calibration plot is linear up to 2 × 10^?6 mol dm^?3 iodide. The detection limit for iodide with the HCADE under voltammetric conditions is 4 × 10^?8 mol dm^?3; this is lowered to 8 × 10^?9 mol dm^?3 by using the differential pulse stripping technique.     

A direct differential pulse anodic stripping voltammetric method for the determination of thallium in natural waters

A dual direct method for the ultratrace determination of thallium in natural waters by differential pulse anodic stripping voltamrnetry (d.p.a.s.v.) is presented. D.p.a.s.v. at the hanging mercury drop electrode and at the mercury film electrode is used in the concentration ranges 0.5–100 μg Tl l^-1, and 0.01–10 μg Tl l^-1, respectively. Quantification is aided by the technique of standard additions. The response of the method is optimized for typical natural surface water matrices. An intercomparison of thalium determinations performed by the two anodic stripping methods and electrothermal-atomization atomic absorption spectrometry on normal and thallium-spiked surface water samples demonstrates equivalent accuracy within the range where atomic absorption is applicable. The method appears free from serious interferences.     

Stripping voltammetric determination of mercury(II) at antimony-coated carbon paste electrode

A new procedure was elaborated to determine mercury(II) using an anodic stripping square-wave voltammetry at the antimony film carbon paste electrode (SbF-CPE). In highly acidic medium of 1 M hydrochloric acid, voltammetric measurements can be realized in a wide potential window. Presence of cadmium(II) allows to separate peaks of Hg(II) and Sb(III) and apparently catalyses reoxidation of electrolytically accumulated mercury, thus allowing its determination at ppb levels. Calibration dependence was linear up to 100 ppb Hg with a detection limit of 1.3 ppb. Applicability of the method was tested on the real river water sample.     

Automatic kinetic determination of Hg(II) by anodic stripping potentiometry with constant current oxidation

A new kinetic method for the determination of Hg(II) is proposed. It is based on the kinetic evolution of the anodic stripping potentiometric curves yielded by a gold electrode previously coated with mercury upon passage of constant electrical currents. The method features a linear determination range between 40 and 800 ppb of Hg(II) and a relative standard deviation of 5% (n = 9) for a mercury concentration of 200 ppb. The experiments were conducted on a customized automatic set-up, and instrumentation, data acquisition and processing were all governed by means of a QBASIC program (PSAKINEL) written by the authors.     

碘的阴极溶出伏安法研究

本文研究了碘在悬汞电极上的阴极溶出行为。提出了直接以络合剂(EDTA,DTPA,DCTA)为电解底液便可有效地消除铅、镉、铜等重金属元素的干扰。测定检出限为6.3×10^-9M。方法可不经分离富集直接测定饮用水和食盐中的痕量碘。     

Anodic Stripping Voltammetry with Galinstan as Working Electrode

The liquid alloy galinstan is used to determine low concentrations in microgram per liter level of trace metals like copper, cadmium, lead, bismuth, antimony and thallium using anodic stripping voltammetry. Like the conventionally applied HMDE, the hanging galinstan drop electrode (HGDE) is able to accumulate the investigated metal ions at the electrode surface. Hence, simultaneous determination of Pb and Cd is possible. Both, DPASV and SWASV were used as measuring methods. The influence of different parameters like accumulation potential and time and the frequency in SWASV were studied. By the use of acetic buffer solutions, the potential window reaches from ?900 mV to 150 mV. The limit of detection (LOD) varies from 6 ppm (worst case, Sb³⁺) to 2 ppb (best case, Pb²⁺). Therefore, the use of galinstan in the form of the HGDE is possible as a “mercury‐free” and environmentally friendly electrode in stripping analysis.     

Cathodic adsorptive stripping voltammetric determination of uranium with potassium hydrogen phthalate

The adsorption properties of dioxouranium (II)-Phathalate complexes onto hanging mercury drop electrode are exploited in developing a highly sensitive and selective stripping voltammetric procedure for the determination of uranium (VI). The reduction current of adsorbed complex ions of U(VI) was measured by both linear sweep (LSCSV) and differential pulse cathodic stripping voltammetry (DPCSV), preceded by a period of preconcentration onto the electrode surface. As low as 2x10(-9) mol dm(-3) (0.5 mug/l) and 2x10(-8) mol dm(-3) (4.8 mug/l) with accumulation time 240 and 120 s using DPCSV and LSCSV, respectively, have been determined successfully. The relative standard deviation of 2.2% at the 5 ppm level was obtained. The interferences of some metal ions and anions were studied. The application of this method was tested in the determination of uranium in superphosphate fertilizer.     

Cathodic adsorptive stripping voltammetry of nickel complexed with hydroxynaphthol blue at a static mercury drop electrode

A new method is described for the determination of Ni based on the cathodic adsorptive stripping of Ni(II) complexed with hydroxynaphthol blue (HNB) at a static mercury drop electrode. Optimal conditions were found to be: accumulation potential -0.50 V (vs. Ag/AgCl); final potential -1.10 V; accumulation time 50 sec; scan rate 200 mV/sec; linear scan mode; filter 0.1 sec; supporting electrolyte acetic acid/acetate (0.25M, pH = 6.0) and concentration of HNB 3.3 x 10(-5)M. The response of the system was found to be linear in a range of Ni concentrations from 25 ppb to the detection limit. The detection limit was found to be 1.7 nM (0.10 ppb) with 2 mins of accumulation time. The effect of various potential interferences (including a variety of cations, anions and organic surfactants) were also studied. With the exception of Co, at less than equimolar concentrations no significant interferences were observed. Al was found to interfere at high concentrations with respect to Ni, but Al concentrations up to 1000 ppb may be masked by sodium citrate or sodium fluoride. The utility of the method is demonstrated by the recovery of Ni in a doped sample of commercial mineral water.     

Determination of thallium in soils by differential pulse anodic stripping voltammetry by means of a mercury film electrode

Trace amounts of thallium can be determined in soils by differential pulse anodic stripping voltammetry with a mercury film electrode. The mercury film is plated ex situ on a glassy carbon surface. By using a supporting electrolyte of ascorbic acid and EDTA at pH 4.5 and the optimum electrolysis potential, interferences from lead and other metal ions can be eliminated. The method does not require any separation of thallium from the matrix. The results are in satisfactory agreement with those obtained by graphite furnace atomic absorption spectrometry.     

Reductive stripping chronopotentiometry for selenium in biological materials with a flow system

Reductive stripping chronopotentiometry in a flow system is used for determination of selenium in mussels and NBS bovine liver after acid digestion. The automated flow system contains a thin-layer cell with a mercury film electrode. In the deposition step, mercury(II) selenide is formed on the mercury film surface; the stripping step involves reduction to mercury and hydrogen selenide. This reduction is done in a separate solution of almost saturated calcium chloride, which eliminates interferences from oxygen so that solutions need not be deoxygenated. The detection limit is 0.14 μg l^?1 selenium at a deposition time of 120 s.     

Determination of cobalt by catalytic-adsorptive differential pulse voltammetry in the presence of 2-aminocyclopentene-1-dithiocarboxylic acid and nitrite

A novel method for the determination of cobalt(II) by stripping voltammetry is described. It involves an adsorptive accumulation of the cobalt(II)-2-aminocyclopentene-1-dithiocarboxylic acid complex on a hanging mercury drop electrode, followed by a stripping voltammetric measurement of the catalytic reduction current of the complex at –1.4 V at pH = 9 (vs. Ag/AgCl). The effects of various experimental parameters on the catalytic current were investigated. An accumulation time of 60 s results in a low experimental limit of detection of 0.1 ng/mL of Co(II), and 0.50 to 40.0 ng/mL of cobalt can be determined. The relative standard deviation at 0.50 ng/mL is 2.8%. Possible interferences from co-existing ions were also investigated. Received: 17 August 1998 / Revised: 16 November 1998 / Accepted: 20 November 1998     

Determination of cobalt by catalytic-adsorptive differential pulse voltammetry in the presence of 2-aminocyclopentene-1-dithiocarboxylic acid and nitrite

A novel method for the determination of cobalt(II) by stripping voltammetry is described. It involves an adsorptive accumulation of the cobalt(II)-2-aminocyclopentene-1-dithiocarboxylic acid complex on a hanging mercury drop electrode, followed by a stripping voltammetric measurement of the catalytic reduction current of the complex at –1.4 V at pH = 9 (vs. Ag/AgCl). The effects of various experimental parameters on the catalytic current were investigated. An accumulation time of 60 s results in a low experimental limit of detection of 0.1 ng/mL of Co(II), and 0.50 to 40.0 ng/mL of cobalt can be determined. The relative standard deviation at 0.50 ng/mL is 2.8%. Possible interferences from co-existing ions were also investigated. Received: 17 August 1998 / Revised: 16 November 1998 / Accepted: 20 November 1998     

Voltammetric study of the redox behaviour of the Hg(II)/Hg(I)/Hg system at a rotating metal-ring/glassy-carbon disc electrode

The reduction of Hg(II) at a glassy-carbon electrode in various electrolytes has been studied by rotating ring-disc voltammetry. Reduction proceeds directly to metallic mercury in a single 2-electron step. However, at the foot of the wave, and only during the first reduction sweep after pretreatment of the electrode surface, a small amount of Hg(I) species is detected at the ring. The appearance of an Hg(I) intermediate is most pronounced in sulphuric acid solution. The reduction of Hg(II) is found to proceed irreversibly and to be of first order. At sufficiently negative potentials the reduction is convective-diffusion controlled. Stripping voltammetric experiments indicate that the dissolution of mercury gives Hg(II) in complexing electrolytes. In non-complexing electrolytes the initially formed Hg(II) reacts with mercury atoms on the electrode surface to give Hg(I). During electrodissolution, two stripping peaks may be observed as a result of underpotential adsorption of mercury on glassy carbon. The difference in peak potential between the adsorption (mono) layer peak and the bulk mercury peak has been related to the difference in work functions of the deposit (mercury) and substrate (carbon). A rotating glassy-carbon electrode has been used for the anodic stripping determination of mercury. When an appropriate amount of a cation such as cadmium(II) or copper(II) is added to the test solution, mercury down to 2 x 10(-9)M (0.4 ng ml ) can be determined in acidified thiocyanate electrolyte with a relative standard deviation of about 22%.     

Stripping chronopotentiometric measurements of lead(II) and cadmium(II) in soils extracts and wastewaters using a bismuth film screen-printed electrode assembly

The key to remediative processes is the ability to measure toxic contaminants on-site using simple and cheap sensing devices, which are field-portable and can facilitate more rapid decision-making. A three-electrode configuration system has been fabricated using low-cost screen-printing (thick-film) technology and this coupled with a portable electrochemical instrument has provided a a relatively inexpensive on-site detector for trace levels of toxic metals. The carbon surface of the screen-printed working electrode is used as a substrate for in situ deposition of a metallic film of bismuth, which allows the electrochemical preconcentration of metal ions. Lead and cadmium were simultaneously detected using stripping chronopotentiometry at the bismuth film electrode. Detection limits of 8 and 10 ppb were obtained for cadmium(II) and lead(II), respectively, for a deposition time of 120 s. The developed method was applied to the determination of lead and cadmium in soils extracts and wastewaters obtained from polluted sites. For comparison purposes, a mercury film electrode and ICP-MS were also used for validation.     

Determination of thallium(I) in solutions containing cations interfering in potentiometric ion-pair formation-based titrations

The possibility of the use of simple potentiometric coated-wire sensors in the analysis of mixtures of ions, the determination of which is based on the ion-pairing principle, was studied. Attention was especially paid on the determination of thallium(I) in the presence of alkali metal ions, mercury(II), copper(II) and silver(I). It was found that thallium(I) can selectively be titrated with sodium tetraphenylborate in diluted solutions. Interferences of ions of the alkali metals are practically negligible if their concentrations are lower than 10(-3) mol dm(-3). Interference of Cu(II) is minimized using EDTA as a masking agent, Hg(II) and Ag(I) ions are sufficiently screened by additions of sodium cyanide. In mixtures containing higher concentrations of alkali metals, thallium(I) can be oxidized to thallium(III) and selectively titrated as TlCl(-)(4) with a cationic titrant.     

Electrodes of Nontoxic Solid Amalgams for Electrochemical Measurements

The preparation, activation and electrochemical pretreatment of electrodes based on nontoxic solid amalgams were described. Testing of metal solid amalgam electrodes (MeSAEs) proved their broad applicability in many respects, e.g., as to the range of working potentials and the level of background currents, well comparable with those of the hanging mercury drop electrode (HMDE). A regeneration of their surfaces before each measurements could be simply automatized using a PC‐controlled system providing a reasonable repeatability of voltammetric measurements down to 3% RSD. Combination with stripping techniques at accumulation times t_ac=300 s the detection limit amounted to the concentration level of 1 ppb Cu(II), Pb(II), Cd(II), Zn(II), etc. Best electrochemical properties were exhibited by the silver solid amalgam electrode (AgSAE). For example, polished AgSAE (p‐AgSAE), completely free of liquid mercury, proved satisfactory even at more negative potentials enabling the determination of Zn(II), Mn(II), IO , etc. Moreover, even better repeatability of mercury meniscus modified AgSAE (m‐AgSAE) was due to better quality and renewability of its surface. In many cases further testing confirmed that under appropriate conditions MeSAEs represent good, often cheaper and more users‐friendly alternatives to HMDE.     

Iridium Oxide Film Electrodes for Anodic Stripping Voltammetry

The new iridium oxide film electrode, applied for the determination of lead(II), cadmium(II) and copper(II) traces using differential pulse anodic stripping voltammetry (DP ASV) is presented. The electrode display an interesting stripping voltammetric performance which compares with electrodes commonly used in voltammetry. The deposited film is known as anodically electrodeposited iridium oxide film (AEIROF). The AEIROF electrode is characterized by long‐term stability (more than 40 days) and very good reproducibility of the analytical signals in this time (≤12% for 0.5 μM of lead). The regeneration of iridium film is very simple in a time shorter than 60 seconds. The effects of various factors such as: thickness of AEIROF film, preconcentration potential and time, supporting electrolyte composition, potential interferences are optimized. The detection limit for AEIROF film electrode based on glassy carbon for an accumulation time of 30 s is as low as 7 nM for lead(II). The repeatability of the method at a concentration level of the lead(II) as low as 0.5 μM, expressed as RSD is 2.5% (n=10). The proposed method was successfully applied and validated by studying certified reference material CTA‐OTL‐1. Such an attractive use of ‘mercury–free’ ‐ environmentally friendly electrodes offers great promise to measure trace metals.